Programming and using in dual mode

how do i programme n70-1 for both GSM and CDMA frequencies.Does it requier a seperate SIM? The operating channels are chl1-42,chl2-83,SID-14495 and NID-- 65535

The N70 is a dual mode GSM/WCDMA, not CDMA as in most U.S. state. You just go to Tools->settings->Network->select dual mode
WCDMA(Wideband Code Division Multi Access) is 3G far different from CDMA which is a different Mobile phone network technology.
Message Edited by android on 09-Apr-2008 12:55 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

There are very specific requirements for using an iMac as an external display.
From Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
What are the requirements for TDM?
A Mac notebook or desktop with a Mini DisplayPort or Thunderbolt connection
A Thunderbolt or Mini DisplayPort cable
A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (Mid 2012 and later)
Thunderbolt to Thunderbolt
Thunderbolt
Note that the iMac (Retina 5K, 27-inch, Late 2014) does not support Target Display Mode.

How to run different programs and use their output in other programs

Dear java members,
I am trying to figure out how to get data from a file, database, or program and use that information in another
program. Can you help please?
I have looked through several texts and while the information is there somewhere I have not found the specific
capabilities or examples that explain how to do this.
I want to learn how to do this with objects.
The specific applications I am working with are the GIS (Geographic Information System) suite of ESRI products
such as ArcInfo and ArcView.
I am working with simulators for hydrologeology (ground water) and other geophysical phenomenae. Programs for
decisions and assessment of probability such as found in geostatistical analyses packages. Drawing programs
and data manipulation programs such as spreadsheets in windows and scripting languages found in most Unix
packages.
I want to be proprietary platform free! I want to be accessing apps and or data wherever they are and in
whichever form they are in or best used.
Web techniques and protocols are where I think most of my effort will be focused.
One of the mediums (media) that I expect to use a lot is XML.
If I can find a simplified (generalized) explanation how this is done and how the parts fit together through and or
with objects. If I can find references to texts and examples I will be very appreciative and very much less
confused.
I am interested in using the Java programming language.
Thank you
ctavares1

Hello ctavares1,
I am not quite sure that I understand what you are trying to do. The programs that you mention: ArcInfo and ArcView, are they stand alone, native, platform dependent applications? Or are they written in Java? It sounds like there are stand alone, native, platform dependent applications, that write their output to either a file or a database.
The other piece that is puzzling me is: Do you intend to write an Applet or a Java Application? This is important because Java places several restrictions on what an Applet can do.
There is also the question of how the data is produced. Is it produced all at once in batch or is it produced a little at a time in real time?
These and other questions will need to be answered before you can begin designing your application. There are many tutorials dealing with opening a file or database and manipulating that data from an Applet or a Java Application, but it is a different matter all together getting data from an application.
Here are a few tutorials on File I/O and JDBC:
http://java.sun.com/docs/books/tutorial/jdbc/index.html
http://java.sun.com/docs/books/tutorial/essential/io/index.html
-Merwyn,
Developer Technical Support,
http://www.sun.com/developers/support.

How to automate the execution of several programs and use their output

Dear java members,
I am trying to figure out how to get data from a file, database, or program and use that information in another program. Can you help please?
I have looked through several texts and while the information is there somewhere I have not found the specific capabilities or examples that explain how to do this.
I want to learn how to do this with objects.
The specific applications I am working with are the GIS (Geographic Information System) suite of ESRI products such as ArcInfo and ArcView.
I am working with simulators for hydrologeology (ground water) and other geophysical phenomenae. Programs for decisions and assessment of probability such as found in geostatistical analyses packages. Drawing programs and data manipulation programs such as spreadsheets in windows and scripting languages found in most Unix packages.
I want to be proprietary platform free! I want to be accessing apps and or data wherever they are and in whichever form they are in or best used.
Web techniques and protocols are where I think most of my effort will be focused.
One of the mediums (media) that I expect to use a lot is XML.
If I can find a simplified (generalized) explanation how this is done and how the parts fit together through and or with objects. If I can find references to texts and examples I will be very appreciative and very much less confused.
I am interested in using the Java programming language.
Thank you
ctavares1

Hello Tavares,
What you seek can be done, but before that you must know from where you want to take the data. In what form you will get the data in and where you want to use it and how.
Your problem is what we call an architectural issue. If possible please write to me at [email protected]
With the above information - I shall be able to help you to some extent.
Ironluca

MSI P67A-GD53 (B3) - BSOD if 2 sticks of DRAM used in dual mode

Hi there,
I have an issue with BSOD when using 2 sticks of DRAM when the machine is overclocked or the DRAM is set to 1333MHZ and above.
Initially I got the system up and running and over clocked using the OC Genie button on the mother board over clocking to 4.3GHZ which ran great but after a day or 2 I got
BSOD. Initially I thought this was due to an SSD failure so I brought another OCZ AGILITY 3 SSD and reinstalled windows 7 and again after a few days I got BSOD.
This time however I ran memtest at bootup and saw errors appearing. I tested each DRAM stick separately and they were error free after running memtest on each for a good few hours.
When I put both RAM sticks back in dual mode the errors appeared again. I turned off OC genie and ran the same testes on the RAM with the same results.
Now in the bios I noticed that the DRAM was set to run at 1333MHZ so I changed this to 1600MHZ (the speed on the label on the DRAM itself) and ran memtest once more which through up loads of errors. So then I changed it to 1066MHZ, ran memtest and bingo! no errors!
So now I have my machine running nicely unclocked with the DRAM running at 1066MHZ.
Thing is I want to be able to overclock my machine and discover what is causing this DRAM failure.
It would appear that there is no issue with the hardware as it all works at slower speeds.
What could be causing the BSOD when the machine is overclocked or when the DRAM is running at more than 1066MHZ?
many thanks
spec;
MSI P67A-GD53 (B3)
2ND GENERATION INTEL CORE I5 2500K 3.30GHZ SOCKET LGA1155 - RETAIL
CORSAIR VENGEANCE 8GB (2X4GB) DDR3 PC3-12800C9 1600MHZ DUAL CHANNEL KIT
THERMALTAKE FRIO ADVANCED CPU COOLER
OCZ AGILITY 3 SATA III 2.5" 60GB SOLID STATE HARD DRIVE
CORSAIR TX 650W V2 ATX2.31 80 PLUS BRONZE POWER SUPPLY
MSI GEFORCE GTX 570 TWIN FROZR III POWER EDITION/OC 1280MB GDDR5

You do that. For the P67 boards, the earmarked slots for 2 memory modules are 1 and 3.
The applied memory voltage may be a tad too low. You can up that to 1,575 manually.
The BIOS version is the latest for Sandy Bridge processors.
Insert only one memory module in the first slot closest to the CPU. Then do a full CMOS clear with power cord removed, and retest your system again with only the one module.
If the tests are good, then add the second module.

Calling a transaction code in between the program and use the output

Hi frnds,
i want to call a transaction code in between the program and pass the input .After getting the output, use that output in the program

Hi Navin,
Why don't you sit with ABAPer he can explain better.
Regards,
HAri.

Adobe 11.0.3 keeps running after closing the program and uses all cpu

After closing Adobe reader it remains in the background on task manager and uses about 25% of CPU for each instance, each time a pdf is closed it adds another instance in the background, when there are four my cpu is maxed out. I have to use my computer with task manager always running so I can end task each time I close a PDF. I tried the solution stopping welcome screen with registry fix and other fixes for prior versions, none help. Running Windows 8.

In order to deploy via GPO, you need to create AIP (Administrative Installation Point) for Reader 11.0 and then patch that AIP with 11.0.04 to create AIP of 11.0.04
Method:
1. Extract Reader 11.0.4 exe via the following command line,
AdbeRdr11004_en_US.exe -sfx_o"<extraction_path>" -sfx_ne
e.g. if you want to extract to c:\temp_folder
you should run the following command,
AdbeRdr11004_en_US.exe -sfx_o"c:\temp_folder" -sfx_ne
You should see the following six files in c:\temp_folder,
ABCPY.INI
AcroRead.msi
AdbeRdrUpd11004.msp
Data1.cab
setup.exe
Setup.ini
2. Now navigate to "C:\temp_folder" folder to create AIP for 11.0 in "C:\Rdr11AIP" and follow the wizard
msiexec /a AcroRead.msi TARGETDIR="C:\Rdr11AIP"
3. Now navigate to "C:\Rdr11AIP" to create AIP for 11.0.4 in C:\Rdr11AIP" and follow the wizard
msiexec /a AcroRead.msi TARGETDIR="C:\Rdr11AIP" PATCH=<"Path to 11.0.04 patch location">
for this example, "Path to 11.0.04 patch location" is going to be "c:\temp_folder\AdbeRdrUpd11004.msp"
So the command would be,
msiexec /a AcroRead.msi TARGETDIR="C:\Rdr11AIP" PATCH="c:\temp_folder\AdbeRdrUpd11004.msp"
4. You will see following files in your "C:\Rdr11AIP" folder,
AcroRead.msi
Common
CommonAppData
program files
Win
Windows
5. Now copy the contents of this folder to your network location and link the AcroRead.msi file in the Group Policy Editor, you are now ready the deploy 11.0.04
Hope, it helps.

How to create a labview program and use it as a compiled prgram

I am a mechanical engineer, and I have some formulas and equations that I used to obtain maximum thickness of pipelines and also in the design of steel structures, what I need now is to use Labview to put these huge number of formulas in one program. I can do that, but the problem after I make the program I want it to be used by anybody on any PC which is not installed Labview on it, and that is the problem, I don't know if I can make an excel sheet or something to be the interface that can be used by the user, and if I can, I hope that I can have the details of who to execute that.

LabVIEW interacts with Microsoft Excel using its Active X hooks. Anything Microsoft has exposed in the Active X API, LabVIEW can do. This includes opening Excel, reading values, writing values, etc. Doing this can be tricky for a novice programmer and NI has created the Report Generation Toolkit for Microsoft Office that plugs into LabVIEW for a more streamlined experience.
The Developer Zone is a good place to start a search looking for Active X Excel examples: http://zone.ni.com/devzone/fn/p/sn/n16:en/sb/navsRel?q=microsoft+excel+labview&x=0&y=0
As well as the Forum: http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=2391
Reading and writing to an open Excel file could become quite cumbersome however. If the Excel file is open and the user is interacting with it, writing to that same file will return an error saying that the file is currently open. It would have to end up like this: User opens file, modifies some fields, saves file and closes excel. LabVIEW program opens file, reads fields and writes a result, then opens Excel to display to the user the result.
Is there any specific reason you want to use Excel as your user interface? You can use the front panel of a LabVIEW application to enter the data and display the results, all while writing this data to an Excel file for logging/reference in the future.
Message Edited by Stephen B on 11-17-2008 01:26 PM
Stephen B

Still needing help downloading program and using the redemption code given to me on the card I purchased at Home Depot two days ago.

Still need ing help downloading and installing program from card I purchased at Home Depot two days ago.

It isn't a good idea to start a second thread on the same topic. You have had responses under the first post. I suggest you go there and continue this discussion.

Security list maintainence program and use

What is the difference between following conc. request programs when run from the HRMS super user resp. also what is the importance of this program execution.
Security List Maintenance
Security List Maintenance (Obsolete)
Thank you.

Hi,
If you go by general meaning, you should not use "Security List Maintenance (Obsolete)"
Also, in short, if you want all your responsibility to work as per the security method attached with them, you need to run the Program "Security List Maintenance" on regular basis.
Thanks,
Avinash

Is It Safe To Use Target Disk Mode Between My Intel iMac And A G4 eMac ?

I want to use DiskWarrior 4 to rebuild my Intel-iMac's directories but a suitable startup CD has not yet been produced.
So I intend to put DW on my old G4 eMac (OSX 10.4.10) and use Target Disk Mode between the two.
As they have different processors and OS will it be possible and more importantly will it be safe to do so?
Ian.

I received the very latest CD revision from Alsoft for DiskWarrior, Rev. 42. This latest version is STILL not able to boot the newest MacBook Pros. I tried, and eventually my MacBook just restarts to its internal HDD.
So I tried to run DiskWarrior 4.1 on a PowerMac Dual G4 which I had the Macbook Pro connected via target disk mode. NOTE: Both Macs are running the latest Mac OS X 10.5.4.
About half way through the "rebuilding directory" process, the G4 had a kernel panic and the black screen came up telling me to force shutdown my Mac. I nearly soiled myself. Luckily, the freeze up happened before the vital stage when DiskWarrior is replacing the directory. So MacBook Pro luckily booted back up okay.
So, I'd say to play it safe and NOT try to run DiskWarrior 4.1 from an older pre-Intel Mac to rebuild an Intel Mac's directory via target disk mode.
Currently, I think my only option I have to rebuild my Macbook Pro's directory is to install Mac OS X on an external HDD, install DiskWarrior and run it from there.

6 Ways to Avoid Metro and Use Desktop Mode in Windows 8

http://blog.laptopmag.com/6-ways-to-totally-avoid-metro-and-use-only-desktop-mode-in-windows-8

Go to the Start Screen, type in "Internet Options" go to the programs tab, and click the checkbox with "Open Internet Explorer tiles on the desktop."
Also, going to Internet Options from the Control Panel works if you can't search
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Retrive PO number processing the bdc and use it to create a GR

I have created a bdc session that has one PO with multiple line items thru the session method .
I need to retrive the PO number in my program and use it to create a goods receipt .
From what i understand i will have to use call transaction for the first BDC so that i can retrive the number .
Am i correct in that and if yes how do you do that .
Thanks in advance

Hi Anjali,
If you use call transaction there you have the option as getting the return parameter.
CALL TRANSACTION...[MESSAGES INTO itab] ... .
So this ITAB will contain the error messages if the CALL TRANSACTION fails or the PO number if it succeeds.
Regards,
Atish

Is it possible to use Target Display Mode under Bootcamp on iMac 27?

I run Solidworks under Windows XP in Parallels 5 on my pre Unibody MBP since a couple of years. Works well but I could need more speed and screen size.
I'm thinking that the following setup would suit me well if it works:
iMac 27 running Windows in Bootcamp
New MBP running OSX
Is it possible to connect the MBP to the iMac and use Target Display Mode when the iMac runs Bootcamp? Haven't been able to find a good answer.
If not - Apple: Will you please implement this in a Bootcamp update...?

Welcome to the Apple Discussions!
If I understand your question, you wish to access the MBP in TDM from the iMac booted into Windows. The iMac using Windows should see the MBP in TDM as it would any other connected external USB or FireWire HDDs. However, you should also face the limits that the version of Windows you use may have regarding reading disks formatted for Macs.
Dah•veed

Why am I being told that a JPEG file that I made changes to in Photoshop 6 (CS6) can't be saved? The message I get says that either the file is locked and I don't have permission to execute this or another program is using this file.

i recently purchased a 21.5 iMac with Yosemite (10.10.1) and was disappointed to discover that my CS6 programs are not functioning correctly. I am unable to use the "Save As" command when making changes to a JPEG file in Photoshop. The message I get says that either another program is using the file or it is locked and I don't have permission to execute that command. I'm experiencing a similar problem in Bridge when trying to move an unwanted file to the Trash. Again, I get a message telling me that i don't have permission to do this. Lastly, I'm unable to open any Camera Raw files. Any suggestions? I had no problems with the Mavericks OS on my old iMac and although it's much slower, I'm tempted to go back to using my old iMac. At this point, I feel as if I've just wasted $2300+ (tax included).

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Programming and using in dual mode

Similar Messages

Maybe you are looking for