Programming HR Infotype 2003 updates

Hi
I have a requirement to create infotype 2003 (Substitution) records from a bespoke infotype 9007 that I have just created. I am wanting to avoid a BDC session (naturally) and was therefore leaning towards IDocs or BAPIs. I have spotted the IDoc HRSM_D01 that I could possibly use and then execute the report RPTEXTPT to process the data from the staging tables.
What I wanted to know, was whether this would be the correct way forward, or is there a cleaner/more future proof way. We are currently on 46C and are starting an upgrade to ECC 6.0 in Jan '07.
Thanks in advance.
Ian
It appears I should be using the HR_INFOTYPE_OPERATION FM.
Message was edited by: Ian Stubbings
Message was edited by: Ian Stubbings

Tamás Nyisztor wrote:
> Unfortunately SAP lacks perfection, deal with it.
Hi Tamás,
Of late i've been dealing with HR_INFOTYPE_OPERATION frequently & if you dig deep into it you'll see that there is a BDC being done using CALL DIALOG on dialog module HR_MAINTAIN_MASTER_DATA !!! And you must be knowing CALL DIALOG is obsolete.
Anyways there's always an excuse of downward compatibility though
BR,
Suhas

Similar Messages

Change infotype 2003 when changing infotype 2001

Hi,
When changing some infotype 2001, I need to make a change for the same date in infotype 2003. So, I'm using BADI HRPAD00INFTY, method BEFORE_OUTPUT so I can change infotype 2003.
I already can change the infotype in that BADI, but after changing infotype 2001, which means on PAI, it seems that the old value of infotype 2003 is saved in memory, so it does not assume the new value there, and it gives me a warning message that I want to avoid with this development.
When I leave the transaction, infotype 2003 is updated, so that is working.
Do you have any idea how can I save the change in infotype 2003 in memory, so when changing 2001 it will recognize it?
Thanks in advance.
Best regards,
Sónia Gonçalves

You can try using the function call 'HR_INITIALIZE_BUFFER'.
Arya

Enhance infotype 2003

I want to enhance infotype 2003.
I'm going through PPCI transaction, i've created structure CI_2003 with a new field.
I've created modulpool ZP200300, and i've inserted a new entry in table T582C.
But when i check the infotype via PA30 my new field is not shown,
Any ideas???

Unfortunately you cannot enhance the Time Infotypes.. pl take a look at this
Re: Add new field to 2001 infotype

I have a hp C410 all-in-one series printer. When I updated to 10.8.1 it was no longer supported. HP told me to go to the Apple system updates and download an installation program. I can't find that program in my Apple updates file.

I have a hp C410 all-in-one series printer. When I updated to 10.8.1 it was no longer supported. HP told me to go to the Apple system updates and download an installation program update. I can't find that program in my Apple updates file. Please help.

From the HP Support site, this may help:)
"Re: Problem with latest HP software update for Mountain Lion and HP Photosmart Premier C410.
Options
08-10-2012 10:54 AM
Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it."
Hope this helps

New ABAP Program to check Direct UPDATE in Database Table

Hi all,
As per customer requirement , I have to develop ONE Program which find out that in which ABAP Program , Programmer has used Open Sql command like UPDATE , DELETE , INSERT , MODIFY to direct update in Database Table.
Have a look on all Z-ABAPs, find out if there are statements with "update", "delete", "insert" or "modify" in the coding, then find out if updates to sap-Tables are done
How can I achived that ?
Please , If anybody is having idea , than please let me know..
Thanks You ,

Hi
Kindly refer to the below link. This has step by step how you can achieve the checks.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/12659a90-0201-0010-c18b-9d014f9bed0d]
But if you want to check if any program they have used 'UPDATE' then you can do like below.
Go to SE38
Utilities---> Find in Source Code-
Find --- UPDATE
In program - Z* or ZX* if you want to search only in Exits
Regards,
Vijay V .

All my CS 3 programs open with "Adobe updater quit unexpectedly"

I just installed CS3 suite with discs. All my CS 3 programs open with "Adobe updater quit unexpectedly” crashes programs sometimes ! icon
Mac OS 10.9.5
What can fix this?
(I tried a uninstall / reinstall ) No luck.
Thanks

activate is grayed out. Registration is available and when I select it, it says "A problem was encountered while trying to send the information over the internet" So I select "submit again" and nothing happens. Then the program closes and I get the added updater quite message.

I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.

I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.
Both these situations have cropped up on my MacBook Pro since the last update.
Thanks for your help.
Cheers
Bob

The 'Winmail.dat' problem has been extensively covered in these forums, I would search for that (a Google search works well) and unfortunately I have not seen the pdf print problem before, but assuming the software is current and functions normally (other than the pdf print problem) I have no suggestion other than the obvious (but time consuming) re-installation of Office.
I wish I had more

Why is my Firefox Aurora seems to be located in Program Files (x86)\Aurora\updated\firefox.exe, but that directory doesn't exist on my computer?

I'm using FusionDisplay to get a taskbar for my second monitor, and the taskbar has worked well until now. Now when I open pinned Aurora, it opens a new application and doesn't merge with the pinned down application icon.
It seems to locate the Firefox.exe to Program Files (x86)\Aurora\updated\firefox.exe, which doesn't exist. Also windows task manager right click menu for firefox.exe won't open anything when I click Open File Location.

Hi. I'm having the same problem with Final versions of Mozilla applications (FF and TB) on Win7 x64 as well. I don't have Display Fusion or the likes.
This started around FF15, and happens about every other update since. This is Very frustrating. Restarting the computer fixes it though. I'd never believe I'd have to restart the computer after pretty much about every update, major or minor. Now this happened to me for both FF19->19.02, and TB 17.0.3->17.0.4 at the same time. No other software running meanwhile.
This happens for about the 3 or 4th time. It's frustrating to have to restart every now and then for a browser update.
I'll stick to a version for both (19.0.2 and 17.0.4) forever, thanks Mozilla! Couple that with the inability of most versions of TB to sustain a longer uptime than 10-15 days with no addons and just 4 pop accounts with 50-100 emails and just one with 1000.

Trying to find a Program that locates and updates your songs and albums??

Does any1 know of a program that Finds and Updates Information about Your songs and Albums. These are the Songs and albums that have already been on my PC and not have been purchased on Itunes

In the detailed help for the event structure there is a link to caveats and recommendations for using event structures. It is a good starting point.
It is courteous to let the Forum know when your questions are related to a school assignment or homework. We are glad to help you learn LabVIEW, but do not do your homework for you.
You have learned the major disadvantage of the sequence structure: It must run to completion before anything else can happen.
If you are building a state machine (typically a while loop with shift registers enclosing a case structure with one case per state) and having trouble with timing, then think about your requirements. Apparently you have some time delays, but under certain conditions you must terminate a delay/wait and do something else. One way of doing this is to have a Wait state. The wait state has a short delay, determined by the minimum time you can delay responding to a changed condition, and a check to see if the required elapsed time has occurred. If the time has not elapsed, the next state is the Wait state again. The state machine can repeat any state as often as necessary. So a 15 second delay could be implemented by going to a Wait state with a one second wait 15 times. Any error or new command will see a response in no more than one second.
Lynn

I'm running Windows 7 and iTunes and the other Apple programs wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system

I'm running Windows 7 and iTunes (and the other Apple programs) wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system? Does someone know of some proprietory block (I think it is related to Quicktime)? Also, once I re-downloaded everything, cleaned everything up, and deleted duplicate files, I closed down my computer. When I re-started it, iTunes was "brand new" -- all of my music, organization, tagging, etc. was gone and had to start over. Idea?

Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

How to run a java program in windows 2003 server from unix server.

Hi ,
I want to run a java program in windows 2003 server from unix machine ..
will RMI helps me to obtain this.
Please tell me the procedure to do this.
Thanks in advance,

rmi,web services,corba,web 2.0,xml,xls,dtd,rss,ruby on rails,https,soap,tags,blog,podcast,google

How Can I tell what program is asking to update?

I keep getting a message that a program needs administrators permission to update. I have no idea what program could be updating so rather than sign in I cancel. Periodically the message pops up again. I don't want to install something I shouldn't. Is there a way to find out what program is trying to update?

Hello Bobng,
It sounds like the Mac App store has an update ready for one of your apps and you want to know which app it is. You can see what updates are available in the Mac App store with this article:
OS X: Updating OS X and Mac App Store apps
http://support.apple.com/kb/ht1338
Choose Apple () menu > Software Update – If prompted, enter an admin name and password.
The App Store opens and displays any software updates available for OS X and Mac App Store apps. OS X updates will be at the top of the list. Note: Opening the App Store by clicking its Dock icon will only show Mac App Store app updates.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Strange behavior of WindowsIntune / Win8.1 : Repetitively launch C:\Program Files\Microsoft\OnlineManagement\Updates\Bin\omupdclt.exe

Hi,
After moving from Win8 to Win8.1 (using WindowsStore update),
I observed sometimes that some command prompt Windows (ugly black MSDOS Windows) opens / closes Repetitively in my desktop.
At a moment where the computer was really busy, I was abble to see the title of this black window :
It was : C:\Program Files\Microsoft\OnlineManagement\Updates\Bin\omupdclt.exe
Can someone tell me how to prevent this strange behavior ?
Thanks in advance.
AC Soft.

I have also openned a case at WindowsIntune support, and up to now, they replyed me this :
We have been able to reproduce this issue ourselves. We are currently working with our engineers to identify if there is a way to prevent these command prompts from launching.
So, while waiting, I Tried your solution.
On the Win8.1 computer that had the problem, i found an AccoundID value, with { }, and all letters in Uppercase, as described in your solution. So, the problem for me is not that AccountID is not populated...
When I looked at another Win8.1 computer that had not the problem, i found an AccountID value
without { }, and with all letters
in lowercase.
So I looked at a Win7 Virtual machine that was enroled into intune too, and that obviously didn't had the problem, and I found there an AccountID value without { }, and with all letters in lowercase, same as on the working computer.
So on the computer that had the problem, I removed the { }, put all letters in lowercase, then run
%ProgramFiles%\Microsoft\OnlineManagement\Updates\Bin\omupdclt.exe /agentupdatenow
I rebooted the computer, and now, I wait to see if the problem is solved...
I will tell you what happened in some days...
AC Soft.
That process will not fix this issue. We have a fix coming in an upcoming service release.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

ABAP Program to delete the update rules

Hi guys,
Is there any ABAP Program to delete the update rules if any body knows.

Hi dear,
try with FM RSAU_UPDR_DELETE...
Hope it helps!
Bye,
Roberto
...and please dont forget to reward the answers...it-s THE way to say thanks here !

I need to update my macbook but I need to know what software program to buy to update it. I am operating on Mac OSX 10.5.8

I need to update my macbook but I need to know what software program to buy to update it. I am operating on Mac OSX 10.5.8. I want to be up to date on all software updates at the end.

Choose About this Mac from the Apple menu and check the processor.
If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
If it's a Core 2 Duo or better Mac, upgrade it as if it was a Core Duo Mac, and once done, if desired, open the Mac App Store, and try downloading Yosemite. If you get told it's incompatible, go to the online Apple Store and order a download code for Lion 10.7.
Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004. If you upgrade the OS, back up the computer first.
(115509)

Programming HR Infotype 2003 updates

Similar Messages

Maybe you are looking for