Programming sky remote to control new TV

We've just bought a new TV so have tried to programme the Sky remote to control the TV volume but to no availAll instructions have been followed -Sky remote is a Rev9TV is a Panasonic TX40C 300B Codes tried are: 166406782505167802540051 It has worked to control everything BUT the volume! We've tried resetting it by taking batteries out, holding select button for 30 secs etc but it still won't control the volume there any other codes to try? Any suggestions gratefully received! Thanks :-)

I emailed Panasonic reguarding a code and this is the reply I got - Dear Mr. Jones,Thank you for your reply.In response, I am writing to inform you that at the moment we are not aware of any such codes and we cannot provide you with a guarantee that this will become available at some point.I appreciate that this answer might be disappointing and I am sorry that Panasonic cannot be of assistance in this particular case. Should you have any further queries, please do not hesitate to contact us again and we will endeavour to further assist.Kind Regards,
George Customer Service Team
Panasonic UK   Have to say its not looking good

Similar Messages

  • Program sky remote to TV

    Please can someone help me. I've tried everything to program my remote to my TV and it's not doing anything. I have the right code but still nothing. Thanks in advance

    I assume you're using a bona fide Sky remote.  Some cheap clones do not have tv macro's stored and cannot be programmed, they can only operate the digibox.  If the remote does not flash twice after selecting 'Select&Red' together,  you won't be able to use the remote for controlling the tv. If you have a genuine Sky remote,  reset it to its factory status.  Press: TvSelect & Red together  ( remote LED flashes twice )999                                        (                   -"-                               ) then try entering the tv code as you have done already.   

  • Program Comcast Remote to Control Apple TV

    Does anyone know if this is possible?
    If so, don't tell me, because that may increase my love for the aTV to the point that i will eat it for dinner tonight.
    Cause that's what I do with things I love. Eat them for dinner.
    Seriously, though. Possible or what? Eh?

    Hi Benom,
    The Apple TV will respond to a paired Apple remote, your ComCast remote will not work.
    Cheers,
    John

  • Sony HT-CT60BT Soundbar and Sky Remote

    Hi there I know I can give the codes a go to check, but I am yet to order the Sony HT-CT60BT Soundbar and wondered if anyone had got their sky remote to control the volume on this specific soundbar before I do? Thanks in advance

    I wish!  I have tried everywhere to get these codes, without success.  It's a fantastic soundbar, but changing the volume is such a faf.  

  • Have programmed 3rd party remote to control apple tv first edition---have purchased new apple tv..will remote work without reprogramming?

    have programmed third party remote to control 1st edition apple tv--purchased new (3rd edition) aplple tv and do i have to reprogram remote or will the remote settings work?

    You would have to reprogram.

  • Can you use the apple remote to control tv programs?

    Can you use the apple remote control like a tv remote to control tv programs & DVDs on the computer? Everything I've found about the Apple Remote talks about using it for products other than desktops. I watch some regular tv shows on my iMac & would like to be able to use a remote control.
    I have a built-in infrared receiver.
    Thanks!

    You should be able to control DVD playback now with the Apple Remote. You may be able to get a bit of functionality with web sites by using Remote Buddy by using it as a virtual mouse and keyboard:
    http://www.macupdate.com/app/mac/21872/remote-buddy
    but you're not going to get anything close to the sort of functionality you'd get with a remote and a TV.
    Regards.

  • Setup directions for the new voice remote to control my audio device ( ie Sony RX).

    Where do I find step by step instructions to setup my new Xfinity voice remote to control my audio device ( ie Sony Rx). the web site Xfinity.com/voiceremotes does not show it?

    See if this helps: http://forums.xfinity.com/t5/X1/XR5-and-XR11-quot-Voice-Remote-quot-Code-Lists/td-p/2550616

  • Remote pannel control

    hello ther,
    I am a new to Labview.
    Can any body please help me on remote pannel controling.
    I have made a simple program.  Now all I want to do is I want to control that Vi remotly from another PC connected in LAN.
    I have gone throught a pdf from NI's knowledge base and tried but I could not get the job done.
    Waiting for reply

    Dear  smercurio_fc,
    Thankyou very much for your reply.
    Please refer the link for the pdf I went through for remote pannel control.
    http://www.ni.com/white-paper/4791/en
    I have done all the settings described. And tried to access the VI remotely.  Please let me know if something more is to be done.
    The VI  which I made was a simple one, just one numeric control connected to indicator.

  • Remotes Not Controlling Power or Volume

    I have a multiroom dvr system.  My main tv with dvr has no remote control problems.
    My 2 additional tvs are both having remote problems.  The FIOS remotes no longer control the power or the volume on the tvs.  The original tv remotes can still perform both these functions, which is annoying but manageable.  Do I need new FIOS remotes?

    from my experience, if it's two remotes that go down or have problems and no longer control the tv's, it's because the remotes got switched.   so try taking one control and move it to the other room that is having problems and vice versa and try the remotes again.  if it's still having a problem, then just make sure the batteries are good and then you can re-program the remotes.   instructions are inside the cable boxes themselves, inside the menu
    you go to MENU -> HELP -> IN HOME AGENT -> REMOTE CONTROLS.
    and then it will show you how to program the remote for your TV.
    Try swapping them first,    It happened to me and a couple of my friends.  

  • Apple remote always controls itunes / frontrow

    I just installed Snow Leopard and came to the conclusion that the 'Apple Remote' always controls itunes/frontrow/audio +/-. This is really annoying since I want to control thirdparty software like Plex Media center.
    Is there a way to disable the remote for itunes and the audio? I already uninstalled frontrow, but that didn't help.

    In order to control third-party software, you need third-party software! Check out Remote Buddy. This program allows you to configure your Apple Remote to work with other applications. Download the trial and see if it works for you. (Note: I haven't used this application, I just happen to know it exists.)

  • How do I program my remote to work for my satellite and Blu Ray player?

    I recently purchased the 55 in LED Toshiba tv model number 42SL417U and I am having trouble finding the instructions on how to program it to work with my Sony Blu Ray player and Satellite. I went to product support and could not find a topic on how to program the remote. 

    Information on how to program your remote is available on page 79 of your user's guide.
    The TV also has CEC functionality to control other CEC-enabled, HDMI-connected devices. More information about this is on page 19 of the user's guide.
    - Peter

  • Sky remote doesn't work tv

    Just bought a Toshiba 32RV753 but my sky remote won't control it. Tried generic code from sky manual & also called sky but no joy. Can anyone help?

    Appletvs page dont mention. Anything about sky anything so not sure why you would assume it would

  • How do I use an apple tv remote to control my mac

    I am having a macbook pro with retina. How do I use an apple tv remote to control my mac?Is there a way. For eg. if I want to control the volume using the remote how do I do?

    No, the iPad has no IR receiver. (I think you mean "Airplay" and not "Airdrop", by the way.)

  • I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

    I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

    Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm  not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

  • LED TV 40TL963 restarts when using Sky remote!!

    Hello guys, My 40TL963 LED tv has started to shut down and restart when we use the Sky remote. No matter which direct we point it!!!
    Its never done it before. I have had this telly for over 2 years now and this has only just started to happen.
    Any advise would be greatfull.
    Thanks

    Did you try with a RESET of the TV set already ? (if you don't wanna loose your channels you should use the "ToshibaEdit" tool to avoid useless work for sorting afterwards, before you are doing this).

Maybe you are looking for

  • Gl a/c uploading

    Hi, What are tables related to Gl a\c uploading? What is the tcode for recording ? pls, suggesssst the best way for uploading ! Thanks in advance. regards umakanth

  • DVD burn for a French Mother-in-Law: NTSC or PAL?

    Hi All, I've just finished a DVD slideshow of my recent wedding to send to my Mother-in-Law in france. Should I burn it using NTSC or PAL format? I remember there's a problem of watching videos taped in France in the UK... Many Thanks Paul

  • How to put values from selection screen to  ztable

    hi all, i have created a ztable. now i want to put data through se38. i have given 5 parameters in selection screen same as there in ztable. now if i put values in selection screen then it should put that values to my ztable . how can i put values in

  • Unable to set NTFS permissions on share using PowerShell. The user shows up with no rights checked off.

    I am having a little problem here with setting NTFS permissions via PowerShell.  Basically I am able to make a new directory on the share, and assign a user NTFS permissions however it just assigns the select user without any permissions set. $userna

  • Testing EJB3.0 session beans

    Hi, recently, I spent some time to find out possible approaches to creating EJB 3.0 session bean tests. I also went over the following article http://www.oracle.com/technology/pub/articles/debu_testability_of_ejb.html. Article is referring to library