Programs are blocked

When I am busy with my iMac, so after about then minutes all open programs become blocked

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • Upload Ftp commands in C# program are blocked by Windows 7 firewall

    Hello everybody,
    I have developped a C# application which launches a Ftp command file.
    But I cannot upload the files.
    When I run the Ftp command file manually, it works.
    And when I disable the Windows 7 firewall for domain, the C# application works.
    Here is the Ftp command file :
    OPEN 100.100.100.100
    user usr_essai
    pwd_essai
    binary
    cd dir_essai
    mput "C:\Essai_Ftp\*.doc"
    quit
    And here is the Ftp log file when I try to run the C# application :
    ftp> Connecté à 100.100.100.100
    OPEN 100.100.100.100
    220 ESSAI1
    ftp> user usr_essai
    331 User usr_essai, password please
    230 Password Ok, User logged in
    ftp> binary
    200 Type Binary
    ftp> cd dir_essai
    250 Change directory ok
    ftp> ftp>
    mput "C:\Essai_Ftp\*.doc"
    200 Port command received
    425 Unable to open the data connection
    200 Port command received
    425 Unable to open the data connection
    200 Port command received
    425 Unable to open the data connection
    200 Port command received
    425 Unable to open the data connection
    ftp> ftp>
    quit
    221
    I have tried to exclude some programs from the firewall.
    I have created out going rules for excluding "ftp" and "w3wp.exe" in the firewall.
    But none of these actions have made the C# application to work.
    Do you have an idea ?
    Thank you very much in advance.
    Laurent.

    Hi,
    This issue is more related with Visual C#, you could post in that forum:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Karen Hu
    TechNet Community Support

  • Error in BDC program for Block vendor in SAP R/3

    Hello friends,
    I wrote a BDC program to block vendor using FK02.
    When I debug the program in <b>No screen</b> mode
    the program gives a error 'No batch input data for screen SAPMSSY3 0131.
    But the screen name and screen number is not available in the program.
    When I execute without debugging  in No screen mode, the program works correctly.
    When I run in ALL screen mode, the program works correctly and the program does not prompt for SAPMSSY3 0131 screen.
    Is there any solution for this problem.

    check this
    ... MODE mode
    Effect
    The processing mode can take the following values:
    'A' Display screen
    'E' Display only if an error occurs
    'N' Do not display
    <b>'P' Do not display; debugging possible</b>
    If the MODE addition is omitted, then the processing mode is 'A'.
    If a screen is displayed in processing mode 'E' because the system reached the end of the BDC data, the system automatically switches to processing mode 'A'.
    If breakpoints are set in a transaction tcod called using the CALL TRANSACTION tcod USING itab variant, these are not actually reached in 'N' mode. The system tries to insert data in the Debugger screen; the call ends with SY-SUBRC = 1001 and the message "Batch input data is not available for screen SAPMSSY3 0131" (S 00 344).
    Conversely, in 'P' mode, transaction screens are processed in the background (as in 'N' mode) and debugging is possible.
    Regards
    Prabhu

  • "This program is blocked by group policy"

    Hi all.
    I have searched Google a fair bit on this but shockingly I just can't find an actual answer.  The Group Policy forum is where I should have started rather than finally come to :)
    I am no genius with GP, I use it in the most basic ways in very small orgs.  My users appear to all have the same problem, when they insert a removable media device that has software on it that might run or autorun, I get the "This program
    is blocked by group policy, contact your admin" message.  I don't believe this ccurs with removable media just as just plain USB storage sticks.  So far the two examples I know of are for an Internet providers USB broadband mobility stick, and
    another user that is using some Kodak products (SD card, camera, and even the Kodak CD I think). 
    Environment is 2008 R2, Win7 Pro workstations, all users are local admin on their machine.  All users are in the default Users container, and all computers are in the Computer container.  To my recollection I have never set a GPO that would directly
    or indirectly cause all users problems like this.  The only thing that has had indirect consequences that I know of in the past, was because we use many of the options available under Folder Redirection, including redirecting the Desktop.  In some
    cases, when a user has tried to launch an exe or what not that was on the desktop, it failed because it's trying to launch in truth on their user folder on the server, not really on the Windows Desktop.  I'm not sure if that might impact my current problem. 
    To start, where can I go to actually check GPO's for this?  Is this the Software Restriction Policy?  If so, which one governs, the one in User Configuration or Copmputer Configuration?  In both cases I went to GPMC and under both, it would
    say I had to go to the Actions menu to create a New Software Restriction policy.  I did so (just picking the item in the Actions menu), and the resutlt was some choices under the actual GPO now, none of which I've yet configured. 
    So, I need to torublesahoot this ut also to know where such a thing causing this error message would be set under normal circumstances.  Also, could antivirus cause this?  I can't see the error saying "group policy" if it did though. 
    Thank you very much. 

    Hi,
    Thanks for posting your issue in the forum.
    Based on your description, I suspect that maybe Software Restriction Policy has been configured in the domain. At this time, I suggest we could try to collect the following information to narrow
    down the cause of the issue.
    GPMC.log
    ==================
    a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
    b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select the proper
    user in the wizard)
    c. Right click 
    the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
    Once we get the report, please check if the Software Restriction Policy has been configured and applied to the problematic computers and users. If so, please disable the policy setting to see
    if the issue persists.
    In addition, please try to refer to the following articles for detailed information about Software Restriction Policy and how to troubleshoot Group Policy problems.
    Software Restriction Policies
    http://technet.microsoft.com/en-us/library/hh831534.aspx
    Troubleshooting Group Policy Problems
    http://technet.microsoft.com/en-us/library/cc787386(v=ws.10).aspx
    Hope this helps.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback
    on our support quality, please send your feedback here.
    Andy Qi
    TechNet Community Support

  • Bridge CS6 tool tips are blocking the buttons!

    When I try to change the layout view (grid, list, etc.) with the buttons on the bottom right, the tool tips appear and I'm not able to click through them. So, basically, when I hover over them, the tool tips are blocking me from doing it.
    I look in Prefs for a Tool Tips checkbox and it's not checked right now, but they're still appearing, and still protecting the buttons from being clicked.
    Anyone know how to turn them off?
    And I have to say this is the most ridiculous problem I ever had with a program. Kinda funny.

    I still don't think it's the right checkbox to deactivate interface tool tips as it's in the "Thumbnails" sections of prefs. (And when I switch that on I get tool tips for thumbnails, when I switch it off I do not get tool tips for thumbnails. But the interface tool tips are always consistent.)
    Well, I'm again afraid. But this time for my big mouth...
    You are very right, I did have a long delay on my machine before the tooltips showed and having the checkbox set to on it seemed directly appearing.
    As there are many inconsistencies in Bridge (in fact throughout the whole Suite) this one is very big. Don't have a good alternative short name for it but calling 'show metadata when hovering over' 'show tooltips' is really a very bad approach
    The version is CS6 and I'm on a 2009 Mac Pro using 10.6.8 if that matters any.
    Thanks, it always matters, especially since this has become a general forum with both Windows and Mac. Different OS and different versions (including detail version number) gives more insight in possible solutions or advice (update etc)
    Also, I noticed that if I make Bridge CS6 smaller than the monitor window, then the tool tips over the buttons do not appear over the buttons anymore, but under them instead. The tool tips seem to be set to appear below the mouse pointer.  When Bridge is maximized and the bottom of the Bridge window touches the bottom of the monitor there is no place else for the tool tips to go, so they get pushed up... and cover the buttons.
    I always have the Dock in sight hence pressing the green button to enlarge my Bridge window to full screen leaves a small free space and as you well discovered has not your problematic behavior with tooltips over buttons.
    I would think Bridge should be able to detect the end of the screen, obviously it does because it knows to move the tool tips up so they don't appear "off screen".
    They should use this detection to determine if the tool tips should appear above or below (or away from the screen edge) the mouse pointer.
    Agreed
    I'll stop calling it a bug and switch it to "oversight". Bottom line though is the tool tips still block the buttons and shield them from being clicked.
    Oversight is the correct word, but besides the above described improvement they really should get rid of the name tooltips in thumbnails and add an option to really hide or show all tooltips as you would expect in a proper application
    Thanks for staying tuned and clarify!
    While the Bridge team tries to read most of this forum it might be wise to make a feature request for this, are you willing to do so since this is your discovery?

  • TNS-12528: TNS:listener: all appropriate instances are blocking new connect

    Hi all,
    May be you remember that i posted connection problem to my database and when checking mi listener log file i found the error TNS-12528 as in the following portion of my alert log file:
    05-NOV-2007 11:37:42 * service_died * abdb1 * 12537
    05-NOV-2007 11:37:42 * service_died * abdb1 * 12537
    05-NOV-2007 11:37:49 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=abdb)(CID=(PROGRAM=E:\mvoucher\bin\SMPPGateways\Transmitter\PyroESMEt.exe)(HOST=MGUTP)(U
    SER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.175)(PORT=4517)) * establish * abdb * 0
    05-NOV-2007 11:37:52 * (CONNECT_DATA=(SID=abdb1)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.204)(PORT=1437)) * establish
    * abdb1 * 12505
    TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
    05-NOV-2007 11:37:55 * (CONNECT_DATA=(SID=abdb1)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.204)(PORT=1440)) * establish
    * abdb1 * 12505
    TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
    05-NOV-2007 11:37:55 * service_update * abdb2 * 0
    05-NOV-2007 11:37:56 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=abdb)(CID=(PROGRAM=E:\mvoucher\bin\SMPPGateways\Transmitter\PyroESMEt.exe)(HOST=MGUTP)(U
    SER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.175)(PORT=4518)) * establish * abdb * 12528
    TNS-12528: TNS:listener: all appropriate instances are blocking new connections
    05-NOV-2007 11:37:57 * (CONNECT_DATA=(SID=abdb1)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.204)(PORT=1443)) * establish
    * abdb1 * 12505
    TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
    05-NOV-2007 11:37:59 * (CONNECT_DATA=(SID=abdb1)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.204)(PORT=1446)) * establish
    * abdb1 * 12505
    TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
    05-NOV-2007 11:38:01 * (CONNECT_DATA=(SID=abdb1)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.204)(PORT=1449)) * establish
    * abdb1 * 12505
    Does anybody have an idea about why this error is comming.
    Note that we are using oracle 10g in a RAC environment with 02 nodes.
    Thanks for your help.
    Raitsarevo

    I don't use SID in my tnsnames.ora, i use SERVICE_NAME and it's OK. May be someone who have configured iot's tnsnames made it wrong because there consultant installaing new application in our company and may be their tnsnames was wrong and causing that problem. Because in their application it always tries to connect in the database till connection will be established and may be it increase the database session number.
    Isn't it and when session max number is reached may be database connection will hang.
    Correct me if it is the case, we will have a look in their applivcation tnsnames configuration.
    Thanks
    regards
    Raitsarevo

  • Two sessions are blocked each other in

    Hi All,
    My database is Exadata machine. 11.2
    These days we encountered one case, that is two sessions are always blocked by each other. I get this info from v$session blocking_session.
    For examle, the information looks like
    sid blocking_session event
    1 2 libarary cache lock
    2 1 row cache lock
    and as you know there are many other sessions are blocked by sid 1.
    By lookiing up v$sql, I got the sql for these 2 sessions.
    /* QSMQ VALIDATION */ ALTER SUMMARY "XXXXX"."Gxxx_CP_CAL_TIME_TEMP_MV" COMPILE
    /* QSMQ VALIDATION */ ALTER SUMMARY "XXXXX"."Gxxx_CP_CAL_TIME_MV" COMPILE
    Both of these 2 MV share some underlying objects. And both of the 2 sessions started at the same time roughly.
    If the compilation incurs the lock on the object, why the 2 sessions block each other?
    Can someone give me some tips,please?
    Best regards,
    Leon

    Leon,
    sid blocking_session event
    1 2 libarary cache lock
    2 1 row cache lockYou are saying that above situation does not cause a deadlock error to be generated in either one of those two sessions?
    /* QSMQ VALIDATION */ ALTER SUMMARY "XXXXX"."Gxxx_CP_CAL_TIME_TEMP_MV" COMPILE
    /* QSMQ VALIDATION */ ALTER SUMMARY "XXXXX"."Gxxx_CP_CAL_TIME_MV" COMPILEThese to me look like programmed 'ALTER SUMMARY' commands (the comment in front of the statement seems to indicate so). It's the application that's doing this right?
    - Can you reproduce this with two sqlplus sessions?
    - Why is the application compiling the MV's? Are underlying objects being altered frequently?
    - Should the application not just be 'refreshing' the MV's instead of compiling them?
    Just some thoughts.
    Toon
    Edit:
    Dom's right. The alter summary statements seem to be Oracle internal calls generated by DBMS_MVIEW.REFRESH executions.
    Edited by: Toon Koppelaars on Nov 24, 2011 10:41 AM

  • PrintSetting, ColorManagement, PrintOption, ExtensionSetting, are blocked

    PrintSetting, ColorManagement, PrintOption, ExtensionSetting, are blocked in Aperture. I noticed in Word i can use these settings for the paper i am useing and Aperture will not hold these settings. I have an Epson R1800 and have downloaded the latest drivers and the latest updates for Aperture on my 2006 Macbook with intel duocore. I believe the problem is in Aperture and not Epson. The newest driver from Epson is for the duocore so this should work. I am not sure why these settings are not blocked in some programs and are blocked in other programs like aperture? Any ideas out there?
    Jivan

    Hi Jivan,
    Have you tried this ??
    http://docs.info.apple.com/article.html?artnum=302821
    Hope it helps.
    Merry Christmas
    Chris

  • How do I get Firefox to display the information bar when a pop up is blocked I accidentally clicked on "Don't show this message when pop-ups are blocked" when a pop up was blocked. How do I get this message to reappear again when a pop up is blocked?

    I just updated Firefox but can't get it to display the message when a pop-up is blocked. Most times I want them blocked but sometimes I need them enabled.

    You can see a pop-up block icon in the right corner of the Status Bar if you have chosen to hide the information bar at the top.
    You can left-click that pop-up block icon on the Status Bar and remove the check mark from "Don't show info message when pop-ups are blocked"
    You can look at these prefs on the '''about:config''' page and reset them via the right-click context menu:
    Status bar icon: browser.popups.showPopupBlocker
    Info bar at the top: privacy.popups.showBrowserMessage
    To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
    If you see a warning then you can confirm that you want to access that page.

  • When I try to access certain listings on ebay they are blocked - I am told this is because it thinks I am in France. I use an English ISP and the problem only happens with Firefox, not (for instance) IE. How can I overcome this?

    When I try to access certain listings on eBay I get the following message:
    "Unfortunately, access to this particular listing or item has been blocked due to a Paris commercial court decision that bans trade of certain authentic perfumes and cosmetic products on eBay because of French selective distribution laws. eBay is appealing this ruling but is nevertheless required to enforce it. We are blocking your viewing in an effort to comply with this court decision. Regrettably, in some cases, we may prevent users from accessing items that are not within the scope of the decision because of limitations on existing technology."
    eBay support told me it is because they think I am in France or because I am using a French ISP. I am in London and am using the British ISP, Bethere. What can I do to convince them that I am in England?
    The URL quoted is just an example. It happens frequently with other listings.

    This is what I get:
    ISP: Be Un Limited
    Organization: Be Un Limited
    Connection: Broadband
    Services: None Detected
    City: Horsham
    Region: West Sussex
    Country: United Kingdom
    It can't be a problem with my ISP or my IP address since it only happens with Firefox. When I try out the same listings with other browsers it doesn't happen. eBay said Firefox must be making it seem as though I am in France. Goodness knows how or why??

  • Vendor invoices are blocked automatically with payment blck A instead of R

    There is an issue with a specific vendor.This vendor's invoices are blocked automatically with payment block A instead of
    payment block R.
    I know that invoices are blocked when posted if there is a price variance exceeding 3% and/or 100 Euro with payment block R.The invoices with payment block A are not included in the report Z1PE which is used by the Production Planning in order to monitor the blocked invoices and these invoices remain blocked for a long time until the vendor requests their payment.Could you please check why this happens?

    HI,
    Discuss with your MM Consultant, in MM there is a facility to block the invoice automatically in certain scenarios.
    Thanks & Regards,
    Shashi Kanth.

  • I am trying to install an update of Microsoft office and I get a message that says.  This application must be closed ETC.....   I am running Parralell and I think it is there.  The two programs are "Microsoft Database Daemon" "SyncServicesAgent"....

    I am trying to install an update of Microsoft office and I get a message that says.  This application must be closed ETC.....   I am running Parralell and I think it is there.  The two programs are "Microsoft Database Daemon" "SyncServicesAgent".  How do I close these programs?

    If the Office updates have to be run through Win in Parallels, there's not really a section here that covers that , because Neither Office or Parallels are Apple products. There is only a small chance that you'll find someone with BOTH your conditions who just happend to look into a forum on older iMacs.
    Parallels has a forum here:
    http://forum.parallels.com/forum.php
    I think you'll get a faster response there.

  • Customer Open Items are blocked

    Hi,
    In FB05 I can not view all my open items for particular customer. I.e., In FBL5N I am seeing For XXX customer 1000 open items, but in FB05 i could see only 50 open items. I think most of the items are blocked in some other process.
    So where can i check the blocked open items for cutomer, like any report or any table will say me about blocked open items for particular customer?
    Thanks in advance......

    Hi,
    In FBL5N, you may select the Change Layout Button and choose the field payment block from the hidden column. Click copy button at the bottom. The report will display any block next to the line item.
    I hope it helps.
    Cheers
    Nathan

  • VNICs (both uplinks and VM's vNIC) are blocked on N5K DVS after upgrading to ESXi 5.1

    Hello Gents,
    I cought into weird situation after upgrade VMware ESXi 5.0 to 5.1 on UCS C200M2. Before upgrade I have had server with configured static adapter-fex VNICS and floating/dynamic vm-fex interfaces working perfectly in DirectPathIO mode for VMs. Initial deployment was done according Cisco N5K VM-fex operation guide for   NX-OS 5.1(3)N1(1). There were vCenter 5.1, 2xN5K and 2xC200M with ESXi 5.0 integrated so that N5K DVS was brought to vCenter and hosts could be added to DVS. One of C200M2 (still on ESXi5.0) has no problem while operating VM-Fexs and adapter-fexs while part of its uplinks are on VSS and othe part on DVS (in fact there are none VMs on VSS, so all the workloads use DVS).
    But upgraded C200M cannot operate with DVS correctly: any vmks, vm networks, VMs connected to DVS lose network connectivity.
    Attached picture illustrates diag of connectivity status (uplinks/ets are blocked).
    VEM are fresh and running:
    ~ # vem status -v
    Package vssnet-esxmn-next-release
    Version 4.2.1.2.2.1a.0-3.1.1
    Build 1
    Date Sat Sep 28 18:47:14 PDT 2013
    VEM modules are loaded
    Switch Name      Num Ports   Used Ports  Configured Ports  MTU     Uplinks
    vSwitch0         128         6           128               1500    vmnic0,vmnic1
    DVS Name         Num Ports   Used Ports  Configured Ports  MTU     Uplinks
    N5KDVS-1         256         14          256               1500    vmnic3,vmnic2
    VEM Agent (vemdpa) is running
    ~ #
    ~ # esxcli software vib list | grep cisco
    cisco-vem-v162-esx             4.2.1.2.2.1a.0-3.1.1                Cisco     PartnerSupported  2013-11-11
    Do anybody have an idea why it is going wrong?

    Of course they exist.There is unpatched server with ESXi 5.0 near upgraded server and it works perfectly.
    Finally I downgraded server to ESXi5.0 again and VM-FEX functionality restored.

  • Not able to install Logic on mac with OSX.  10.8.2. Error message: Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported. I have logic studio 8 software purchased in 2007 and upgraded with logic studio 9 (purchased in 2009)

    After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
    What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
    Help!

    Mark,
    Sorry...
    I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
    My apologies and please ingnore those parts of my last post relating to the PPC Macs...
    You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer)  but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
    Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
    You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
    If the Logic Pro App is in your applications folder..
    Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
    Run Logic
    Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
    This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers...

Maybe you are looking for