Programs not opening
When I try to open my programs all I get is a question mark. I cannot even open my system preferences. I have tried opening the programs in the applications folder and nothing happens. Please help!!!
Welcome to Apple Discussions!
Here is a link to an article about the flashing question mark:
http://support.apple.com/kb/TS1440?viewlocale=en_US
Good luck!
Similar Messages
-
FCP & other programs not opening when plug in Firewire
Hello,
First, please forgive the double posting - but I just didn't think that I had made myself very clear lastnight, and I wanted to rectify that.
The problem is, that whenever I plug my camera/deck into my G5 with my firewire, no program will open, including Final Cut. I tried Repairing Permissions, and shutting down and unplugging everything, then powering back up again. Then, I turn on the camera and try opening any program, even Disk Utility, and it will not open (giving me the spinning beach ball) until I turn the camera off. This is making things very difficult, especially since I have projects in Final Cut, that I need to Print to Video, view on my tv monitor, or do anything at all.
I might add that this has indeed worked before, and after some 'futzing' w/it, it would work, but I had been 'futzing' for over 2 hrs., and have lost way too much time. In addition, in order to Log and Capture, I've been 'daisy chaining', using my Dazzle, as well as the camera w/the tv, but, it does not work the other way around, when trying to export -- thanks very much!In response to: "Has the dazzle and the camera ever been connected to the computer at the same time?" and, "Have they both been turned on while both connected at the same time"?
No, they cannot be connected at the same time - I only have 2 firewire ports, one is for the Lacie external drive, the other is for either the Dazzle or Firewire. I unpluged the Dazzle to make way for the Firewire lastnight, because I wanted to Print to Video, and could not, because no program would open up, w/the Firewire plugged in.
I will try resetting the PMU, thanks. Not sure how the camera could be the suspect, as it used to work just fine, and it's less than 2 yrs. old, but will take into consideration.
"(You have taken any hard drive out of the chain while you are troubleshooting - right?)" When I shut everything down lastnight, I unplugged everything, including the Lacie, then plugged everything back in, is that what you mean? Thanks Studio X. -
Why are my programs not opening when I click on them?
I click on a program and it will not open. The icon bounces but I can't open. When I right click on it it gives me the option to force quit. I tried going into settings but same thing - bouncy bouncy
you need to open a force quit window by clicking on the black apple in the top left corner of the screen and quit out of all applications
then shutdown your mac and do SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
after doing this reset restart your mac and try to open your apps and the issue should be resolved. -
Program not opening in right space
I have had a specific program assigned to open in space 2. It used to work fine, but suddenly it doesn't work quit right anymore. If start the program directly, it will just open in whatever space is open. But if I start it by opening a document from the program, it opens in space 2. I tried with other program, and it works fine for them, they open in the space assigned to them. But it just doesn't work for that specific program. Odd. I tried to remove it from spaces and adding it again, with no luck. Any ideas?
If you have two programs on Mac OS which are able to open a filetype,
an arcane set of rules apply about which one wins. It is pretty
unpredicable, and may take into account order of installation, which
one is newer, which one wrote the files, and other things. So there's
no guarantee that reinstalling would change things.
You might find that starting the program you require, and quitting the
other, sometimes helps.
I think you were just lucky that it previously worked as expected to
such an extent you were able to rely upon it.
Aandi Inston -
Many programs not opening after 10.4.9
Only on my desktop dual processor after the 10.4.9 upgrade my Adobe photoshop and Corel painter and Appleworks will not open, my epson scanner will not open. There are others I haven't discovered. IPhoto opens and also Preview. On my ibook I haven't noticed any problem.
Power Mac G4 dual Mac OS X (10.4.9)Probably a good idea to reinstall, using the combo update.
Miriam -
Help with programs not opening!
I have a Lenovo Ideapad Miix 10.
Worked fine until recently. Now when I try to open something like Word or Excel, they don't open. Instead, it takes me to the desktop and does nothing. When I go to "troubleshoot compatibility", I have the option to test the program, allow access to change the computer (or whatever its asking for..) but it still does nothing. When I click no and select that the problem is not fixed, the troubleshooter lists incompatible program as being detected.
This is really inconvenient, and I am still getting comfortable with the windows tablet so dont exactly know my way around yet. anyone able to help out? thanks in advance!You are posting in the "icloud on my mac" forum, but your profile mentions Windows. If using a mac, you need to have iphoto or aperture installed in order to receive new photos via photo stream. If using windows, try posting in the iCloud on a PC forum. You'll get better help there.
https://discussions.apple.com/community/icloud/icloud_on_my_pc -
Programs not opening after install
Alright... I am brand new to Linux operating systems (about roughly 2 days now, and making the switch from MS to Arch). after scouring the forums and the wiki I still can't open up the packages that I installed from the AUR,core,community, or extra repo's... I have tried opening up a terminal session and typing in the program name, but that didn't work, I have gone into the /bin folder and still nothing there either... where/how could I open the files that I installed on my system? If anyone could help, it would be greatly appreciated..Thanks
CERBERUS
Last edited by XSG CERBERUS XI (2013-12-19 15:00:05)Just did a fresh install of Arch and here is the log:
[2013-12-19 16:37] [PACMAN] Running 'pacman -r /mnt -Sy --cachedir=/mnt/var/cache/pacman/pkg --noconfirm base'
[2013-12-19 16:37] [PACMAN] synchronizing package lists
[2013-12-19 16:40] [PACMAN] installed linux-api-headers (3.12.4-1)
[2013-12-19 16:40] [PACMAN] installed tzdata (2013h-1)
[2013-12-19 16:40] [PACMAN] installed iana-etc (2.30-4)
[2013-12-19 16:40] [PACMAN] installed filesystem (2013.05-2)
[2013-12-19 16:40] [PACMAN] installed glibc (2.18-11)
[2013-12-19 16:40] [PACMAN] installed ncurses (5.9-6)
[2013-12-19 16:40] [PACMAN] installed readline (6.2.004-2)
[2013-12-19 16:40] [PACMAN] installed bash (4.2.045-5)
[2013-12-19 16:40] [PACMAN] installed bzip2 (1.0.6-5)
[2013-12-19 16:40] [PACMAN] installed gcc-libs (4.8.2-6)
[2013-12-19 16:40] [PACMAN] installed db (5.3.28-1)
[2013-12-19 16:40] [PACMAN] installed zlib (1.2.8-3)
[2013-12-19 16:40] [PACMAN] installed cracklib (2.9.0-2)
[2013-12-19 16:40] [PACMAN] installed libgssglue (0.4-2)
[2013-12-19 16:40] [PACMAN] installed libtirpc (0.2.3-2)
[2013-12-19 16:40] [PACMAN] installed pambase (20130928-1)
[2013-12-19 16:40] [PACMAN] installed pam (1.1.8-2)
[2013-12-19 16:40] [PACMAN] installed attr (2.4.47-1)
[2013-12-19 16:40] [PACMAN] installed acl (2.2.52-2)
[2013-12-19 16:40] [PACMAN] installed gmp (5.1.3-2)
[2013-12-19 16:40] [PACMAN] installed libcap (2.22-5)
[2013-12-19 16:40] [PACMAN] installed gdbm (1.10-3)
[2013-12-19 16:40] [PACMAN] installed perl (5.18.1-1)
[2013-12-19 16:40] [PACMAN] installed openssl (1.0.1.e-5)
[2013-12-19 16:40] [PACMAN] installed coreutils (8.22-2)
[2013-12-19 16:40] [PACMAN] installed run-parts (4.4-1)
[2013-12-19 16:40] [PACMAN] installed cronie (1.4.11-1)
[2013-12-19 16:40] [PACMAN] installed expat (2.1.0-3)
[2013-12-19 16:40] [PACMAN] installed dbus (1.6.18-1)
[2013-12-19 16:40] [PACMAN] installed pcre (8.34-1)
[2013-12-19 16:40] [PACMAN] installed libffi (3.0.13-4)
[2013-12-19 16:40] [PACMAN] installed glib2 (2.38.2-1)
[2013-12-19 16:40] [PACMAN] installed kbd (2.0.1-1)
[2013-12-19 16:40] [PACMAN] installed kmod (15-1)
[2013-12-19 16:40] [PACMAN] installed hwids (20130607-1)
[2013-12-19 16:40] [PACMAN] installed libgpg-error (1.12-1)
[2013-12-19 16:40] [PACMAN] installed libgcrypt (1.5.3-1)
[2013-12-19 16:40] [PACMAN] installed shadow (4.1.5.1-7)
[2013-12-19 16:40] [PACMAN] installed util-linux (2.24-2)
[2013-12-19 16:40] [PACMAN] installed xz (5.0.5-2)
[2013-12-19 16:40] [ALPM-SCRIPTLET] Initializing machine ID from random generator.
[2013-12-19 16:40] [ALPM-SCRIPTLET] ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
[2013-12-19 16:40] [ALPM-SCRIPTLET] :: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
[2013-12-19 16:40] [ALPM-SCRIPTLET] bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
[2013-12-19 16:40] [PACMAN] installed systemd (208-3)
[2013-12-19 16:40] [PACMAN] installed device-mapper (2.02.104-1)
[2013-12-19 16:40] [PACMAN] installed popt (1.16-7)
[2013-12-19 16:40] [PACMAN] installed cryptsetup (1.6.2-2)
[2013-12-19 16:40] [PACMAN] installed dhcpcd (6.1.0-1)
[2013-12-19 16:40] [PACMAN] installed diffutils (3.3-1)
[2013-12-19 16:40] [PACMAN] installed e2fsprogs (1.42.8-2)
[2013-12-19 16:40] [PACMAN] installed file (5.16-1)
[2013-12-19 16:40] [PACMAN] installed findutils (4.4.2-5)
[2013-12-19 16:40] [PACMAN] installed mpfr (3.1.2.p5-1)
[2013-12-19 16:40] [PACMAN] installed gawk (4.1.0-2)
[2013-12-19 16:40] [PACMAN] installed libunistring (0.9.3-6)
[2013-12-19 16:40] [PACMAN] installed gettext (0.18.3.1-2)
[2013-12-19 16:40] [PACMAN] installed grep (2.15-1)
[2013-12-19 16:40] [PACMAN] installed less (458-1)
[2013-12-19 16:40] [PACMAN] installed gzip (1.6-1)
[2013-12-19 16:40] [PACMAN] installed inetutils (1.9.1.341-2)
[2013-12-19 16:40] [PACMAN] installed iptables (1.4.20-1)
[2013-12-19 16:40] [PACMAN] installed iproute2 (3.11.0-1)
[2013-12-19 16:40] [PACMAN] installed sysfsutils (2.1.0-8)
[2013-12-19 16:40] [PACMAN] installed iputils (20121221-3)
[2013-12-19 16:40] [PACMAN] installed jfsutils (1.1.15-4)
[2013-12-19 16:40] [PACMAN] installed licenses (20130203-1)
[2013-12-19 16:40] [PACMAN] installed linux-firmware (20131013.7d0c7a8-1)
[2013-12-19 16:40] [PACMAN] installed mkinitcpio-busybox (1.21.1-2)
[2013-12-19 16:40] [PACMAN] installed lzo2 (2.06-3)
[2013-12-19 16:40] [PACMAN] installed libarchive (3.1.2-4)
[2013-12-19 16:40] [PACMAN] installed mkinitcpio (16-1)
[2013-12-19 16:40] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-12-19 16:40] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> Starting build: 3.12.5-1-ARCH
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> Starting build: 3.12.5-1-ARCH
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-12-19 16:40] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-12-19 16:40] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-12-19 16:40] [PACMAN] installed linux (3.12.5-1)
[2013-12-19 16:40] [PACMAN] installed logrotate (3.8.7-1)
[2013-12-19 16:40] [PACMAN] installed lvm2 (2.02.104-1)
[2013-12-19 16:40] [PACMAN] installed groff (1.22.2-5)
[2013-12-19 16:40] [PACMAN] installed libpipeline (1.2.5-1)
[2013-12-19 16:40] [ALPM-SCRIPTLET] it's recommended to create an initial
[2013-12-19 16:40] [ALPM-SCRIPTLET] database running as root:
[2013-12-19 16:40] [ALPM-SCRIPTLET] "/usr/bin/mandb --quiet"
[2013-12-19 16:40] [PACMAN] installed man-db (2.6.5-1)
[2013-12-19 16:40] [PACMAN] installed man-pages (3.55-1)
[2013-12-19 16:40] [PACMAN] installed mdadm (3.3-2)
[2013-12-19 16:40] [PACMAN] installed nano (2.2.6-2)
[2013-12-19 16:40] [PACMAN] installed openresolv (3.5.6-1)
[2013-12-19 16:40] [PACMAN] installed netctl (1.4-2)
[2013-12-19 16:40] [PACMAN] installed sed (4.2.2-3)
[2013-12-19 16:40] [PACMAN] installed ca-certificates (20130906-1)
[2013-12-19 16:40] [PACMAN] installed libssh2 (1.4.3-2)
[2013-12-19 16:40] [PACMAN] installed curl (7.33.0-3)
[2013-12-19 16:40] [PACMAN] installed pth (2.0.7-4)
[2013-12-19 16:40] [PACMAN] installed libksba (1.3.0-1)
[2013-12-19 16:40] [PACMAN] installed libassuan (2.1.1-1)
[2013-12-19 16:40] [PACMAN] installed pinentry (0.8.3-1)
[2013-12-19 16:40] [PACMAN] installed libsasl (2.1.26-6)
[2013-12-19 16:40] [PACMAN] installed libldap (2.4.38-1)
[2013-12-19 16:40] [PACMAN] installed dirmngr (1.1.1-1)
[2013-12-19 16:40] [PACMAN] installed gnupg (2.0.22-1)
[2013-12-19 16:40] [PACMAN] installed gpgme (1.4.3-1)
[2013-12-19 16:40] [PACMAN] installed pacman-mirrorlist (20130830-1)
[2013-12-19 16:40] [PACMAN] installed archlinux-keyring (20131027-1)
[2013-12-19 16:40] [PACMAN] installed pacman (4.1.2-4)
[2013-12-19 16:40] [PACMAN] installed pciutils (3.2.0-4)
[2013-12-19 16:40] [PACMAN] installed pcmciautils (018-7)
[2013-12-19 16:40] [PACMAN] installed procps-ng (3.3.9-1)
[2013-12-19 16:40] [PACMAN] installed psmisc (22.20-1)
[2013-12-19 16:40] [PACMAN] installed reiserfsprogs (3.6.24-1)
[2013-12-19 16:40] [PACMAN] installed s-nail (14.4.5-1)
[2013-12-19 16:40] [PACMAN] installed systemd-sysvcompat (208-3)
[2013-12-19 16:40] [PACMAN] installed tar (1.27.1-1)
[2013-12-19 16:40] [PACMAN] installed texinfo (5.2-2)
[2013-12-19 16:40] [PACMAN] installed libusbx (1.0.17-1)
[2013-12-19 16:40] [PACMAN] installed usbutils (007-1)
[2013-12-19 16:40] [PACMAN] installed vi (1:050325-3)
[2013-12-19 16:40] [PACMAN] installed which (2.20-6)
[2013-12-19 16:40] [PACMAN] installed xfsprogs (3.1.11-2)
[2013-12-19 16:45] [PACMAN] Running 'pacman -S syslinux'
[2013-12-19 16:46] [ALPM-SCRIPTLET]
[2013-12-19 16:46] [ALPM-SCRIPTLET] ==> For setting up Syslinux BIOS using the syslinux-install_update script follow
[2013-12-19 16:46] [ALPM-SCRIPTLET] [url]https://wiki.archlinux.org/index.php/Syslinux#Automatic_Install[/url]
[2013-12-19 16:46] [ALPM-SCRIPTLET]
[2013-12-19 16:46] [ALPM-SCRIPTLET] ==> For setting up Syslinux EFI follow
[2013-12-19 16:46] [ALPM-SCRIPTLET] [url]https://wiki.archlinux.org/index.php/Syslinux#UEFI_Systems[/url]
[2013-12-19 16:46] [ALPM-SCRIPTLET]
[2013-12-19 16:46] [ALPM-SCRIPTLET] ==> The syslinux-install_update script does not currently support EFI install
[2013-12-19 16:46] [ALPM-SCRIPTLET]
[2013-12-19 16:46] [PACMAN] installed syslinux (6.02-8)
[2013-12-19 16:55] [PACMAN] Running 'pacman -Sy'
[2013-12-19 16:55] [PACMAN] synchronizing package lists
[2013-12-19 16:55] [PACMAN] Running 'pacman -S sudo'
[2013-12-19 16:55] [PACMAN] installed sudo (1.8.8-1)
[2013-12-19 16:59] [PACMAN] Running 'pacman -S xfce4'
[2013-12-19 17:01] [PACMAN] installed libxfce4util (4.10.1-2)
[2013-12-19 17:01] [PACMAN] installed atk (2.10.0-1)
[2013-12-19 17:01] [PACMAN] installed libdatrie (0.2.6-1)
[2013-12-19 17:01] [PACMAN] installed libthai (0.1.19-1)
[2013-12-19 17:01] [PACMAN] installed libpng (1.6.7-1)
[2013-12-19 17:01] [PACMAN] installed xcb-proto (1.9-1)
[2013-12-19 17:01] [PACMAN] installed xproto (7.0.25-1)
[2013-12-19 17:01] [PACMAN] installed libxdmcp (1.1.1-1)
[2013-12-19 17:01] [PACMAN] installed libxau (1.0.8-2)
[2013-12-19 17:01] [PACMAN] installed libxcb (1.9.1-2)
[2013-12-19 17:01] [PACMAN] installed kbproto (1.0.6-1)
[2013-12-19 17:01] [PACMAN] installed libx11 (1.6.2-1)
[2013-12-19 17:01] [PACMAN] installed renderproto (0.11.1-2)
[2013-12-19 17:01] [PACMAN] installed libxrender (0.9.8-1)
[2013-12-19 17:01] [PACMAN] installed xextproto (7.2.1-1)
[2013-12-19 17:01] [PACMAN] installed libxext (1.3.2-1)
[2013-12-19 17:01] [PACMAN] installed freetype2 (2.5.2-1)
[2013-12-19 17:01] [ALPM-SCRIPTLET]
[2013-12-19 17:01] [ALPM-SCRIPTLET] Fontconfig configuration is done via /etc/fonts/conf.avail and conf.d.
[2013-12-19 17:01] [ALPM-SCRIPTLET] Read /etc/fonts/conf.d/README for more information.
[2013-12-19 17:01] [ALPM-SCRIPTLET]
[2013-12-19 17:01] [ALPM-SCRIPTLET] Configuration via /etc/fonts/local.conf is still possible,
[2013-12-19 17:01] [ALPM-SCRIPTLET] but is no longer recommended for options available in conf.avail.
[2013-12-19 17:01] [ALPM-SCRIPTLET]
[2013-12-19 17:01] [ALPM-SCRIPTLET] Main systemwide configuration should be done by symlinks
[2013-12-19 17:01] [ALPM-SCRIPTLET] (especially for autohinting, sub-pixel and lcdfilter):
[2013-12-19 17:01] [ALPM-SCRIPTLET]
[2013-12-19 17:01] [ALPM-SCRIPTLET] cd /etc/fonts/conf.d
[2013-12-19 17:01] [ALPM-SCRIPTLET] ln -s ../conf.avail/XX-foo.conf
[2013-12-19 17:01] [ALPM-SCRIPTLET]
[2013-12-19 17:01] [ALPM-SCRIPTLET] Check also [url]https://wiki.archlinux.org/index.php/Font_Configuration[/url]
[2013-12-19 17:01] [ALPM-SCRIPTLET] and [url]https://wiki.archlinux.org/index.php/Fonts[/url].
[2013-12-19 17:01] [ALPM-SCRIPTLET]
[2013-12-19 17:01] [ALPM-SCRIPTLET] updating font cache... done.
[2013-12-19 17:01] [PACMAN] installed fontconfig (2.11.0-1)
[2013-12-19 17:01] [PACMAN] installed pixman (0.32.4-1)
[2013-12-19 17:01] [PACMAN] installed libpciaccess (0.13.2-2)
[2013-12-19 17:01] [PACMAN] installed libdrm (2.4.50-1)
[2013-12-19 17:01] [PACMAN] installed libvdpau (0.7-1)
[2013-12-19 17:01] [PACMAN] installed wayland (1.3.0-1)
[2013-12-19 17:01] [PACMAN] installed xf86vidmodeproto (2.3.1-2)
[2013-12-19 17:01] [PACMAN] installed libxxf86vm (1.1.3-1)
[2013-12-19 17:01] [PACMAN] installed fixesproto (5.0-2)
[2013-12-19 17:01] [PACMAN] installed libxfixes (5.0.1-1)
[2013-12-19 17:01] [PACMAN] installed damageproto (1.2.1-2)
[2013-12-19 17:01] [PACMAN] installed libxdamage (1.1.4-1)
[2013-12-19 17:01] [PACMAN] installed elfutils (0.157-1)
[2013-12-19 17:01] [PACMAN] installed llvm-libs (3.3-1)
[2013-12-19 17:01] [PACMAN] installed mesa (10.0.1-1)
[2013-12-19 17:01] [PACMAN] installed mesa-libgl (10.0.1-1)
[2013-12-19 17:01] [PACMAN] installed cairo (1.12.16-1)
[2013-12-19 17:01] [PACMAN] installed libxft (2.3.1-1)
[2013-12-19 17:01] [PACMAN] installed graphite (1:1.2.4-1)
[2013-12-19 17:01] [PACMAN] installed harfbuzz (0.9.24-1)
[2013-12-19 17:01] [PACMAN] installed pango (1.36.1-1)
[2013-12-19 17:01] [PACMAN] installed libxcursor (1.1.14-1)
[2013-12-19 17:01] [PACMAN] installed xineramaproto (1.2.1-2)
[2013-12-19 17:01] [PACMAN] installed libxinerama (1.1.3-2)
[2013-12-19 17:01] [PACMAN] installed randrproto (1.4.0-1)
[2013-12-19 17:01] [PACMAN] installed libxrandr (1.4.2-2)
[2013-12-19 17:01] [PACMAN] installed inputproto (2.3-1)
[2013-12-19 17:01] [PACMAN] installed libxi (1.7.2-1)
[2013-12-19 17:01] [PACMAN] installed compositeproto (0.4.2-2)
[2013-12-19 17:01] [PACMAN] installed libxcomposite (0.4.4-1)
[2013-12-19 17:01] [PACMAN] installed libxml2 (2.9.1-5)
[2013-12-19 17:02] [PACMAN] installed shared-mime-info (1.2-1)
[2013-12-19 17:02] [PACMAN] installed libtasn1 (3.4-1)
[2013-12-19 17:02] [PACMAN] installed nettle (2.7.1-1)
[2013-12-19 17:02] [PACMAN] installed p11-kit (0.20.1-1)
[2013-12-19 17:02] [PACMAN] installed gnutls (3.2.7-1)
[2013-12-19 17:02] [PACMAN] installed libjpeg-turbo (1.3.0-4)
[2013-12-19 17:02] [PACMAN] installed libtiff (4.0.3-4)
[2013-12-19 17:02] [PACMAN] installed keyutils (1.5.8-1)
[2013-12-19 17:02] [PACMAN] installed krb5 (1.11.4-1)
[2013-12-19 17:02] [PACMAN] installed libdaemon (0.14-2)
[2013-12-19 17:02] [PACMAN] installed avahi (0.6.31-11)
[2013-12-19 17:02] [PACMAN] installed libcups (1.7.0-2)
[2013-12-19 17:02] [PACMAN] installed jasper (1.900.1-10)
[2013-12-19 17:02] [PACMAN] installed gdk-pixbuf2 (2.30.2-1)
[2013-12-19 17:02] [PACMAN] installed hicolor-icon-theme (0.12-2)
[2013-12-19 17:02] [PACMAN] installed gtk-update-icon-cache (2.24.22-1)
[2013-12-19 17:02] [PACMAN] installed gtk2 (2.24.22-1)
[2013-12-19 17:02] [PACMAN] installed dbus-glib (0.100.2-1)
[2013-12-19 17:02] [PACMAN] installed xfconf (4.10.0-3)
[2013-12-19 17:02] [PACMAN] installed libice (1.0.8-2)
[2013-12-19 17:02] [PACMAN] installed libsm (1.2.2-2)
[2013-12-19 17:02] [PACMAN] installed xcb-util (0.3.9-1)
[2013-12-19 17:02] [PACMAN] installed startup-notification (0.12-4)
[2013-12-19 17:02] [PACMAN] installed libxfce4ui (4.10.0-1)
[2013-12-19 17:02] [PACMAN] installed exo (0.10.2-2)
[2013-12-19 17:02] [PACMAN] installed garcon (0.2.1-1)
[2013-12-19 17:02] [PACMAN] installed gtk2-xfce-engine (3.0.1-1)
[2013-12-19 17:02] [PACMAN] installed lcms2 (2.5-2)
[2013-12-19 17:02] [PACMAN] installed libgusb (0.1.6-1)
[2013-12-19 17:02] [PACMAN] installed nspr (4.10.2-1)
[2013-12-19 17:02] [PACMAN] installed js (17.0.0-1)
[2013-12-19 17:02] [PACMAN] installed polkit (0.112-1)
[2013-12-19 17:02] [PACMAN] installed shared-color-profiles (0.1.5-1)
[2013-12-19 17:02] [PACMAN] installed sqlite (3.8.2-1)
[2013-12-19 17:02] [PACMAN] installed dconf (0.18.0-1)
[2013-12-19 17:02] [PACMAN] installed colord (1.0.4-1)
[2013-12-19 17:02] [PACMAN] installed recordproto (1.14.2-1)
[2013-12-19 17:02] [PACMAN] installed libxtst (1.2.2-1)
[2013-12-19 17:02] [PACMAN] installed at-spi2-core (2.10.2-1)
[2013-12-19 17:02] [PACMAN] installed at-spi2-atk (2.10.2-1)
[2013-12-19 17:02] [PACMAN] installed xkeyboard-config (2.10.1-1)
[2013-12-19 17:02] [PACMAN] installed libxkbcommon (0.3.2-1)
[2013-12-19 17:02] [PACMAN] installed gtk3 (3.10.6-1)
[2013-12-19 17:02] [PACMAN] installed gtk3-xfce-engine (3.0.1-1)
[2013-12-19 17:02] [PACMAN] installed desktop-file-utils (0.22-1)
[2013-12-19 17:02] [PACMAN] installed libexif (0.6.21-2)
[2013-12-19 17:02] [PACMAN] installed libnotify (0.7.6-1)
[2013-12-19 17:02] [PACMAN] installed thunar (1.6.3-1)
[2013-12-19 17:02] [PACMAN] installed thunar-volman (0.8.0-1)
[2013-12-19 17:02] [PACMAN] installed tumbler (0.1.29-1)
[2013-12-19 17:02] [PACMAN] installed xfce4-appfinder (4.10.1-1)
[2013-12-19 17:02] [PACMAN] installed libxres (1.0.7-1)
[2013-12-19 17:02] [PACMAN] installed libwnck (2.30.7-1)
[2013-12-19 17:02] [PACMAN] installed xfce4-panel (4.10.1-1)
[2013-12-19 17:02] [PACMAN] installed gstreamer0.10 (0.10.36-3)
[2013-12-19 17:02] [PACMAN] installed orc (0.4.18-1)
[2013-12-19 17:02] [PACMAN] installed videoproto (2.3.2-1)
[2013-12-19 17:02] [PACMAN] installed libxv (1.0.10-1)
[2013-12-19 17:02] [PACMAN] installed gstreamer0.10-base (0.10.36-2)
[2013-12-19 17:02] [PACMAN] installed alsa-lib (1.0.27.2-1)
[2013-12-19 17:02] [PACMAN] installed cdparanoia (10.2-5)
[2013-12-19 17:02] [PACMAN] installed libvisual (0.4.0-4)
[2013-12-19 17:02] [PACMAN] installed libogg (1.3.1-2)
[2013-12-19 17:02] [PACMAN] installed libvorbis (1.3.3-1)
[2013-12-19 17:02] [PACMAN] installed libtheora (1.1.1-3)
[2013-12-19 17:02] [PACMAN] installed gstreamer0.10-base-plugins (0.10.36-2)
[2013-12-19 17:02] [PACMAN] installed libunique (1.1.6-5)
[2013-12-19 17:02] [PACMAN] installed xfce4-mixer (4.10.0-2)
[2013-12-19 17:02] [PACMAN] installed python2 (2.7.6-1)
[2013-12-19 17:02] [PACMAN] installed libplist (1.10-1)
[2013-12-19 17:02] [PACMAN] installed usbmuxd (1.0.8-2)
[2013-12-19 17:02] [PACMAN] installed libimobiledevice (1.1.5-2)
[2013-12-19 17:02] [PACMAN] installed upower (0.9.23-2)
[2013-12-19 17:02] [PACMAN] installed sg3_utils (1.36-2)
[2013-12-19 17:02] [PACMAN] installed parted (3.1-3)
[2013-12-19 17:02] [PACMAN] installed libatasmart (0.19-2)
[2013-12-19 17:02] [PACMAN] installed lsof (4.87-2)
[2013-12-19 17:02] [PACMAN] installed udisks (1.0.4-8)
[2013-12-19 17:02] [PACMAN] installed xfce4-power-manager (1.2.0-6)
[2013-12-19 17:02] [PACMAN] installed xorg-iceauth (1.0.6-1)
[2013-12-19 17:02] [PACMAN] installed libxt (1.1.4-1)
[2013-12-19 17:02] [PACMAN] installed libxmu (1.1.2-1)
[2013-12-19 17:02] [PACMAN] installed xorg-xauth (1.0.8-1)
[2013-12-19 17:02] [PACMAN] installed xorg-xinit (1.3.3-3)
[2013-12-19 17:02] [PACMAN] installed mcpp (2.7.2-4)
[2013-12-19 17:02] [PACMAN] installed xorg-xrdb (1.1.0-1)
[2013-12-19 17:02] [PACMAN] installed xfce4-session (4.10.1-3)
[2013-12-19 17:02] [PACMAN] installed libxkbfile (1.0.8-1)
[2013-12-19 17:02] [PACMAN] installed iso-codes (3.44-1)
[2013-12-19 17:02] [PACMAN] installed libxklavier (5.3-1)
[2013-12-19 17:02] [PACMAN] installed perl-xml-parser (2.41-4)
[2013-12-19 17:02] [PACMAN] installed perl-xml-simple (2.20-1)
[2013-12-19 17:02] [PACMAN] installed icon-naming-utils (0.8.90-2)
[2013-12-19 17:02] [PACMAN] installed libcroco (0.6.8-1)
[2013-12-19 17:02] [PACMAN] installed librsvg (1:2.40.1-1)
[2013-12-19 17:02] [PACMAN] installed gnome-icon-theme-symbolic (3.10.1-1)
[2013-12-19 17:02] [PACMAN] installed gnome-icon-theme (3.10.0-1)
[2013-12-19 17:02] [PACMAN] installed gtk-engines (2.21.0-1)
[2013-12-19 17:02] [PACMAN] installed xfce4-settings (4.10.1-1)
[2013-12-19 17:02] [PACMAN] installed vte-common (0.34.9-1)
[2013-12-19 17:02] [PACMAN] installed vte (0.28.2-3)
[2013-12-19 17:02] [PACMAN] installed xfce4-terminal (0.6.2-2)
[2013-12-19 17:02] [PACMAN] installed xfdesktop (4.10.2-1)
[2013-12-19 17:02] [PACMAN] installed xfwm4 (4.10.1-1)
[2013-12-19 17:02] [PACMAN] installed xfwm4-themes (4.10.0-1)
[2013-12-19 17:03] [PACMAN] Running 'pacman -S xfce4-goodies'
[2013-12-19 17:03] [PACMAN] installed gtksourceview2 (2.10.5-2)
[2013-12-19 17:03] [PACMAN] installed mousepad (0.3.0-2)
[2013-12-19 17:03] [PACMAN] installed libical (1.0-3)
[2013-12-19 17:03] [PACMAN] installed orage (4.10.0-1)
[2013-12-19 17:03] [PACMAN] installed thunar-archive-plugin (0.3.1-2)
[2013-12-19 17:03] [PACMAN] installed taglib (1.9.1-1)
[2013-12-19 17:03] [PACMAN] installed thunar-media-tags-plugin (0.2.1-1)
[2013-12-19 17:03] [PACMAN] installed libburn (1.3.4-1)
[2013-12-19 17:03] [PACMAN] installed libisofs (1.3.4-1)
[2013-12-19 17:03] [PACMAN] installed libglade (2.6.4-5)
[2013-12-19 17:03] [PACMAN] installed libxfcegui4 (4.10.0-1)
[2013-12-19 17:03] [PACMAN] installed xfburn (0.4.3-6)
[2013-12-19 17:03] [PACMAN] installed xfce4-artwork (0.1.1a_git20110420-2)
[2013-12-19 17:03] [PACMAN] installed xfce4-battery-plugin (1.0.5-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-clipman-plugin (1.2.3-2)
[2013-12-19 17:03] [PACMAN] installed xfce4-cpufreq-plugin (1.1.0-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-cpugraph-plugin (1.0.5-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-datetime-plugin (0.6.2-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-dict (0.7.0-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-diskperf-plugin (2.5.4-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-eyes-plugin (4.4.2-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-fsguard-plugin (1.0.1-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-genmon-plugin (3.4.0-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-mailwatch-plugin (1.2.0-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-mount-plugin (0.6.4-1)
[2013-12-19 17:03] [PACMAN] installed libmpd (11.8.17-2)
[2013-12-19 17:03] [PACMAN] installed xfce4-mpc-plugin (0.4.4-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-netload-plugin (1.2.0-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-notes-plugin (1.7.7-4)
[2013-12-19 17:03] [PACMAN] installed xfce4-notifyd (0.2.4-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-quicklauncher-plugin (1.9.4-7)
[2013-12-19 17:03] [PACMAN] installed libproxy (0.4.11-2)
[2013-12-19 17:03] [PACMAN] installed gsettings-desktop-schemas (3.10.1-1)
[2013-12-19 17:03] [PACMAN] installed glib-networking (2.38.2-1)
[2013-12-19 17:03] [PACMAN] installed libsoup (2.44.2-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-screenshooter (1.8.1-1)
[2013-12-19 17:03] [PACMAN] installed lm_sensors (3.3.4-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-sensors-plugin (1.2.5-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-smartbookmark-plugin (0.4.5-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-systemload-plugin (1.1.1-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-taskmanager (1.0.0-3)
[2013-12-19 17:03] [PACMAN] installed xfce4-time-out-plugin (1.0.1-2)
[2013-12-19 17:03] [PACMAN] installed xfce4-timer-plugin (1.0.0-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-verve-plugin (1.0.0-3)
[2013-12-19 17:03] [PACMAN] installed net-tools (1.60.20130531git-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-wavelan-plugin (0.5.11-1)
[2013-12-19 17:03] [PACMAN] installed xfce4-weather-plugin (0.8.3-3)
[2013-12-19 17:03] [PACMAN] installed xfce4-xkb-plugin (0.5.6-1)
[2013-12-19 17:03] [PACMAN] installed ristretto (0.6.3-3)
[2013-12-19 17:04] [PACMAN] Running 'pacman -S openbox'
[2013-12-19 17:04] [PACMAN] installed giflib (5.0.5-1)
[2013-12-19 17:04] [PACMAN] installed libid3tag (0.15.1b-8)
[2013-12-19 17:04] [PACMAN] installed imlib2 (1.4.5-6)
[2013-12-19 17:04] [PACMAN] installed openbox (3.5.2-6)
[2013-12-19 17:04] [PACMAN] Running 'pacman -S openbox-goodies'
[2013-12-19 17:07] [PACMAN] Running 'pacman -S xorg-server xorg-server-utils xorg-xinit'
[2013-12-19 17:07] [PACMAN] installed libfontenc (1.1.2-1)
[2013-12-19 17:07] [PACMAN] installed fontsproto (2.1.2-1)
[2013-12-19 17:07] [PACMAN] installed libxfont (1.4.6-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xkbcomp (1.2.4-1)
[2013-12-19 17:07] [PACMAN] installed xorg-setxkbmap (1.3.0-1)
[2013-12-19 17:07] [PACMAN] installed xorg-fonts-encodings (1.0.4-3)
[2013-12-19 17:07] [PACMAN] installed xorg-fonts-alias (1.0.3-1)
[2013-12-19 17:07] [PACMAN] installed xorg-bdftopcf (1.0.4-1)
[2013-12-19 17:07] [PACMAN] installed xorg-mkfontscale (1.1.1-1)
[2013-12-19 17:07] [PACMAN] installed xorg-mkfontdir (1.0.7-1)
[2013-12-19 17:07] [PACMAN] installed xorg-font-util (1.3.0-1)
[2013-12-19 17:07] [PACMAN] installed xorg-font-utils (7.6-3)
[2013-12-19 17:07] [ALPM-SCRIPTLET] Updating font cache... done.
[2013-12-19 17:07] [PACMAN] installed xorg-fonts-misc (1.0.1-2)
[2013-12-19 17:07] [PACMAN] installed xorg-server-common (1.14.5-1)
[2013-12-19 17:07] [PACMAN] installed mtdev (1.1.4-1)
[2013-12-19 17:07] [PACMAN] installed xf86-input-evdev (2.8.2-1)
[2013-12-19 17:07] [PACMAN] installed xorg-server (1.14.5-1)
[2013-12-19 17:07] [PACMAN] installed xorg-sessreg (1.0.8-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xcmsdb (1.0.4-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xbacklight (1.2.0-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xgamma (1.0.5-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xhost (1.0.6-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xrandr (1.4.1-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xinput (1.6.1-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xmodmap (1.0.8-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xrefresh (1.0.5-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xset (1.2.3-1)
[2013-12-19 17:07] [PACMAN] installed xorg-xsetroot (1.1.1-1)
[2013-12-19 17:07] [PACMAN] installed xorg-server-utils (7.6-3)
[2013-12-19 17:07] [PACMAN] reinstalled xorg-xinit (1.3.3-3)
[2013-12-19 17:08] [PACMAN] Running 'pacman -S mesa'
[2013-12-19 17:08] [PACMAN] reinstalled mesa (10.0.1-1)
[2013-12-19 17:09] [PACMAN] Running 'pacman -S xf86-video-vesa'
[2013-12-19 17:09] [PACMAN] installed xf86-video-vesa (2.3.2-3)
[2013-12-19 17:09] [PACMAN] Running 'pacman -S xf86-input-synaptics'
[2013-12-19 17:09] [PACMAN] installed xf86-input-synaptics (1.7.2-1)
[2013-12-19 17:11] [PACMAN] Running 'pacman -S xorg-server xorg-server-utils xorg-xinit'
[2013-12-19 17:11] [PACMAN] reinstalled xorg-server (1.14.5-1)
[2013-12-19 17:11] [PACMAN] reinstalled xorg-server-utils (7.6-3)
[2013-12-19 17:11] [PACMAN] reinstalled xorg-xinit (1.3.3-3)
[2013-12-19 17:11] [PACMAN] Running 'pacman -S xf86-video-vesa'
[2013-12-19 17:11] [PACMAN] reinstalled xf86-video-vesa (2.3.2-3)
[2013-12-19 17:12] [PACMAN] Running 'pacman -S yaourt'
[2013-12-19 17:14] [PACMAN] Running 'pacman -S ttf-dejavu'
[2013-12-19 17:15] [PACMAN] installed ttf-dejavu (2.34-1)
[2013-12-19 17:18] [PACMAN] Running 'pacman -S manarchy'
[2013-12-19 17:20] [PACMAN] Running 'pacman -Sy'
[2013-12-19 17:20] [PACMAN] synchronizing package lists
[2013-12-19 17:21] [PACMAN] Running 'pacman -S firefox'
[2013-12-19 17:21] [PACMAN] Running 'pacman -S firefox'
[2013-12-19 17:24] [PACMAN] Running 'pacman -Sy'
[2013-12-19 17:24] [PACMAN] synchronizing package lists
[2013-12-19 17:24] [PACMAN] Running 'pacman -S firefox'
[2013-12-19 17:25] [ALPM-SCRIPTLET] relogin or source /etc/profile.d/mozilla-common.sh
[2013-12-19 17:25] [PACMAN] installed mozilla-common (1.4-3)
[2013-12-19 17:25] [PACMAN] installed mime-types (9-1)
[2013-12-19 17:25] [PACMAN] installed libvpx (1.3.0-1)
[2013-12-19 17:25] [PACMAN] installed libevent (2.0.21-3)
[2013-12-19 17:25] [PACMAN] installed nss (3.15.3.1-1)
[2013-12-19 17:25] [PACMAN] installed hunspell (1.3.2-3)
[2013-12-19 17:25] [PACMAN] installed firefox (26.0-2)
[2013-12-19 17:28] [PACMAN] Running 'pacman -Sy'
[2013-12-19 17:28] [PACMAN] synchronizing package lists
[2013-12-19 17:28] [PACMAN] Running 'pacman -S manarchy'
[2013-12-19 17:30] [PACMAN] Running 'pacman -S ettercap'
[2013-12-19 17:30] [PACMAN] installed libnl (3.2.23-1)
[2013-12-19 17:30] [PACMAN] installed libpcap (1.5.1-1)
[2013-12-19 17:30] [PACMAN] installed libltdl (2.4.2-12)
[2013-12-19 17:30] [PACMAN] installed libnet (1.1.6-2)
[2013-12-19 17:30] [PACMAN] installed ettercap (0.8.0-1)
[2013-12-19 17:30] [PACMAN] Running 'pacman -S gcc'
[2013-12-19 17:31] [PACMAN] installed binutils (2.24-1)
[2013-12-19 17:31] [PACMAN] installed libmpc (1.0.1-2)
[2013-12-19 17:31] [PACMAN] installed isl (0.12.1-2)
[2013-12-19 17:31] [PACMAN] installed cloog (0.18.1-2)
[2013-12-19 17:31] [PACMAN] installed gcc (4.8.2-6)
[2013-12-19 17:31] [PACMAN] Running 'pacman -S iw'
[2013-12-19 17:31] [PACMAN] installed iw (3.11-1)
[2013-12-19 17:31] [PACMAN] Running 'pacman -S kismet'
[2013-12-19 17:31] [PACMAN] installed bluez-libs (5.12-2)
[2013-12-19 17:31] [ALPM-SCRIPTLET] If you have not done so already, read the README file and the FAQ file.
[2013-12-19 17:31] [ALPM-SCRIPTLET] You MUST edit /etc/kismet.conf and configure Kismet for your system, or
[2013-12-19 17:31] [ALPM-SCRIPTLET] it will NOT run properly!"
[2013-12-19 17:31] [ALPM-SCRIPTLET]
[2013-12-19 17:31] [ALPM-SCRIPTLET] Kismet has been installed with a SUID ROOT CAPTURE HELPER executeable by
[2013-12-19 17:31] [ALPM-SCRIPTLET] users in the group ' kismet '. This WILL ALLOW USERS IN THIS GROUP
[2013-12-19 17:31] [ALPM-SCRIPTLET] TO ALTER YOUR NETWORK INTERACE STATES, but is more secure than running
[2013-12-19 17:31] [ALPM-SCRIPTLET] all of Kismet as root. ONLY users in this group will be able to
[2013-12-19 17:31] [ALPM-SCRIPTLET] run Kismet and capture from physical network devices.
[2013-12-19 17:31] [PACMAN] installed kismet (2013_03_R1b-2)
[2013-12-19 17:31] [PACMAN] Running 'pacman -S macchanger'
[2013-12-19 17:31] [PACMAN] installed macchanger (1.6.0-2)
[2013-12-19 17:31] [PACMAN] Running 'pacman -S make'
[2013-12-19 17:32] [PACMAN] installed gc (7.2.d-2)
[2013-12-19 17:32] [PACMAN] installed guile (2.0.9-1)
[2013-12-19 17:32] [PACMAN] installed make (4.0-2)
[2013-12-19 17:32] [PACMAN] Running 'pacman -S net-tools'
[2013-12-19 17:32] [PACMAN] reinstalled net-tools (1.60.20130531git-1)
[2013-12-19 17:32] [PACMAN] Running 'pacman -S nmap'
[2013-12-19 17:32] [PACMAN] installed lua (5.2.3-1)
[2013-12-19 17:32] [PACMAN] installed nmap (6.40-1)
[2013-12-19 17:33] [PACMAN] Running 'pacman -S sox'
[2013-12-19 17:33] [PACMAN] installed flac (1.3.0-1)
[2013-12-19 17:33] [PACMAN] installed libsndfile (1.0.25-3)
[2013-12-19 17:33] [PACMAN] installed lame (3.99.5-2)
[2013-12-19 17:33] [PACMAN] installed opencore-amr (0.1.3-1)
[2013-12-19 17:33] [PACMAN] installed gsm (1.0.13-7)
[2013-12-19 17:33] [PACMAN] installed sox (14.4.1-4)
[2013-12-19 17:33] [PACMAN] Running 'pacman -S wireshark-gtk'
[2013-12-19 17:34] [PACMAN] installed libsamplerate (0.1.8-3)
[2013-12-19 17:34] [PACMAN] installed jack (0.121.3-7)
[2013-12-19 17:34] [PACMAN] installed portaudio (19_20111121-3)
[2013-12-19 17:34] [ALPM-SCRIPTLET] NOTE: To run wireshark as normal user you have to add yourself into wireshark group
[2013-12-19 17:34] [PACMAN] installed wireshark-cli (1.10.3-2)
[2013-12-19 17:34] [PACMAN] installed wireshark-gtk (1.10.3-2)
[2013-12-19 17:34] [PACMAN] Running 'pacman -S wxphython'
[2013-12-19 17:34] [PACMAN] Running 'pacman -S wxpython'
[2013-12-19 17:35] [PACMAN] installed sdl (1.2.15-5)
[2013-12-19 17:35] [PACMAN] installed wxgtk (2.8.12.1-5)
[2013-12-19 17:35] [PACMAN] installed wxpython (2.8.12.1-4)
[2013-12-19 17:36] [PACMAN] Running 'pacman -S imageviewer'
[2013-12-19 17:47] [PACMAN] Running 'pacman -S harvester'
[2013-12-19 17:47] [PACMAN] Running 'pacman -S theharvester'
[2013-12-19 17:47] [PACMAN] installed python (3.3.3-1)
[2013-12-19 17:47] [PACMAN] installed theharvester (2.2a-3)
Whoa !!! -- Inxsible
I read somewhere around in the forums that "yaourt" is not supported with Arch? so I manually downloaded the packages one by one
Last edited by Inxsible (2013-12-19 18:55:54) -
Hi all -
It seems oddly in the span of a week that three un-releated programs suddenly don't open period. I am on an iMac that I bought brand new back in May and everything ran fine up until now. Strangely, Macromedia Dreamweaver, Microsoft Office 2004 suite (I only use Word, though) and Adobe After Effects 5 don't open. They will bounce once in the menu bar, but nothing else loads (doesn't even load quickly and crash, just bounces one and done). They all worked flawless before for the first 8 weeks that I've had this... Hasn't seem to afflicated any other apps I use (including Adobe PS CS3 and the full Apple Studio Pro 1 suite). I've tested disk utility options and ran this "Onyx" program, deleted preferences, un-installed and re-installed everything... nothing works?
Anyone with a solution would be very helpful, thanks.My recommendation is to copy your Home folder to the HDD. Then open Accounts preferences, Click on the lock icon and authenticate, then CTRL- or RIGHT-click on your account and select Advanced Options from the contextual menu. You should see a field labeled, "Home directory" with a Choose button on the right side. Click the Choose button, locate the Home folder on the HDD, select it and click on the Open button. Click on the OK button of the Advanced Options window. Immediately restart the computer.
This points OS X to the Home folder located on the HDD. Leave the Home folder on the SSD as is. If you have your data already installed there, then delete it from the various folders within the Home folder in order to regain the storage space.
Oh, you can also copy your Applications folder to the HDD, then create an alias to it that you will put on the SSD in place of the Applications folder on the SSD. Rename the alias to "Applications." -
Default Programs not opening..
When i try and download a program from the internet or an attachment from an e-mail, it says that an error has occured and that here is no program on my computer that will open it. I know that i have the programs (word, powerpoint etc.)...please help? i'm in the middle of school and no one here can help me, i really don't have time to send it in!
Thanks> "seek support"...is this related?
Hard to say but I don't think so, you need to call Apple and tell them that hardware test result though it probably means a component/motherboard replacement.
I think that error is Temperature sensor related, has it been overheating ?
Have you applied the SMC and Firmware updates yet ? -
iChat won't open. The computer thinks that is open, but it isnt and I have to force quit it. The same problem happened with iTunes, but other programs in the iLife set have been working fine. Please help!
It could be as simple as using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
Otherwise, the link littleshoulders helpfully provided is the way to go.
Cheers!
DALE -
Mail OS wont open, it just says "program not answering"
I just intalled the latest update, and now when i click to open mail OS, i wont open the program, i just gives the message "Program not answerin" when i right click on the mail icon.
I USED THIS PROCESS :
Get Pacifist.
Download Safari 5.1.7 for Lion.
Quit Safari if running.
Install Safari 5.1.7 using Pacifist. Select "Open Package", choose the 5.1.7 dmg from step 2. Click on the "Contents of Safari5.1.7LionManual.pkg", then click "Install" on the toolbar. Choose "Yes" or "Replace" when asked, and wait for it to finish.
Disable the frameworks that were installed by Safari 6 (by renaming them). You will be prompted for your administrator password.$ cd /System/Library/PrivateFrameworks $ sudo mv SafariServices.framework SafariServices.framework.disabled
Disable additional Safari 6 frameworks (optional, but recommended):$ cd /System/Library/StagedFrameworks/Safari $ sudo mv SafariServices.framework SafariServices.framework.disabled $ sudo mv WebInspector.framework WebInspector.framework.disabled
Launch Safari.
If it doesn't work, you can re-install Safari 6 from Software Update. -
Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open, but all other programs i have been able to open just fine
Moving this discussion to the Bridge General Discussion forum.
-
this was supplied by Ann Shelbourne.
Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error".
These files will often open in Photoshop 7.0.1 or in CS1 but not in CS2.
The trouble may be caused by bad dates in the EXIF data and can originate from an incorrectly-programmed digital camera; or from a scan that was created after after Jan1 of this year (because of a known bug in some scanner software).
If someone runs into the "Could not complete your request because of a program error" problem, and does not have CS1, try opening the Tiff in TextEdit.
The EXIF data is right at the top. Check the EXIF data for bad creation dates and change any incorrect ones there.
Save and close; and then the file will probably open in CS2 without a murmur.> If iPhoto causes problems why not open the images from the Finder?
I get the error if I open a file from within iPhoto using "OPen in external editor" and then alter it (or do not alter it) and try to save it over itself, or save it anywhere else.
I get the error if I do "Show file" in iPhoto to see the file in the Finder. Then, if I double-click and it opens in PS, and then alter it (or do not alter it) and try to save it over itself, or save it anywhere else.
> And with »save it anywhere« You indicate that You use the Save As-command?
Right. -
my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible
i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!! -
Started a Itunes software update this morning which didn't work. Now Itunes will not open at all. I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."
There are a couple of options that I know of to fix the issue.
One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes. You will need to read the instructions in the thread to see the correct uninstall order.
Second option is use System Restore to set your system back to a date prior to the iTunes update. I did this before finding the thread mentioned above.
Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer.
Message was edited by: karivers
Maybe you are looking for
-
when i go to 'New Folder' in outlook the name box only opens for a second so I don't have time to name it correctly. Rename Folder does the same thing. Any thoughts? Many thanks.
-
Can I use My Ibook G4 as a Second Monitor For My Mac Mini G4
Hi I wonderd if theres any way of being able to use my 14'' Ibook G4 as a second monitor for my Mac Mini G4? I already have a Samsung SyncMaster 913n. Is there any way of doing this by firewire using both monitors, if not what cables would I need? Th
-
How to clear a container in OOPS...?
Hi, How to Clear a Container in Object Orientation Programming...? There is a method available......can you tell me that one....... Moderator message: Please search the forums and Google before posting basic questions. Thread
-
How to create mapping diagrams in ODI?
Is there anything in ODI similar to informatica stencil for visio to create the mapping design diagrams to show the data flow and transformations in a visio schematic diagram? Thanks for your feedback.
-
PhotoshopElementsAnalyzer.exe Running in Background
I'm new to Premier Elements 8.0 and was experimenting with my first video edits. I closed the program down, but the PhotoshopElementsAnalyzer.exe continues to run in the background and it is consuming quite a bit of system resources. Q1. Is this pr