Programs not staying in assigned spaces

I've had an issue with Spaces ever since it came out. Programs won't stay in their assigned Spaces. It happens with MS Office (both 2004 and 2011), Adium (won't always show in all spaces when assigned to all spaces), Safari, Firefox, Chrome, iCal, Pages, iTunes, and probably others (these are just ones I use on a regular basis). So it's happening with not just MS Office, but with native OS X programs. And occasionally, I'll have a Safari window open in both, say, Space 1 and 2, even though
No one at the Genius bar has been able to figure it out. I'm on a brand new install of Snow Leopard (harddrive died, chose to not import any settings at all to see if it would resolve my Spaces issue - it didn't). It happened on my white MacBook as well as my current (late 2008) aluminum MacBook.
Anyone have this issue and was able to figure out a solution?

i had been having a similar problem with itunes after a recent update: it would follow me into every space even though i had assigned it to a particular space. i looked all over for an answer to this problem and i found this thread.
my fix is actually quite simple: the problem was resolved just by re-assigning your programs with different spaces (you can revert afterwards). since then itunes has stayed put!

Similar Messages

Programs do not open in assignes spaces (Snow Leopard)

I upgraded to Snow Leopard about a month ago and ever since then I've had an ongoing issue with spaces. I have assigned different programs to different spaces (ie: Firefox and Microsoft Word are in 1, InDesign and Photoshop are in 2) just like I had in Leopard. However, when I open different files, they open in the active space rather than the assigned space. Sometimes, I have one word file open in space 1 and another in space 2, it drives me crazy!
I've tried removing all my assignments and then re-assigning. I've tried the tick box both on and off for "When switching to an application, switch to a space with open windows for the application" and neither does the trick.
I was really used to my workflow in Leopard and I hate that I cannot replicate it in Snow Leopard. I've searched multiple forums and no one seems to have an answer to this. Has there been any development on this front or has anyone found a solution?

In Lion, Mt. Lion and Mavericks the Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
Happy Holidays

Program not opening in right space

I have had a specific program assigned to open in space 2. It used to work fine, but suddenly it doesn't work quit right anymore. If start the program directly, it will just open in whatever space is open. But if I start it by opening a document from the program, it opens in space 2. I tried with other program, and it works fine for them, they open in the space assigned to them. But it just doesn't work for that specific program. Odd. I tried to remove it from spaces and adding it again, with no luck. Any ideas?

If you have two programs on Mac OS which are able to open a filetype,
an arcane set of rules apply about which one wins. It is pretty
unpredicable, and may take into account order of installation, which
one is newer, which one wrote the files, and other things. So there's
no guarantee that reinstalling would change things.
You might find that starting the program you require, and quitting the
other, sometimes helps.
I think you were just lucky that it previously worked as expected to
such an extent you were able to rely upon it.
Aandi Inston

Apps not opening in the assigned Space but in the active Space

I'm not sure if this is normal behavior in Spaces or not:
I have Acrobat assigned to Space 1, Chrome assigned to Space 2. When I download a PDF via Chrome and then click to launch it, Acrobat opens in Space 2, not where my other Acrobat files are located and assigned (Space 1).
Is this the way Spaces is supposed to work? That an application or file opened via another application opens in the active Space rather than the assigned Space? With this behavior, I then need to drag the PDF document from the wrong Space to the right Space if I want to see it side by side with other PDF files. It seems to work this way for all of the different files as well as when I launch an application for the first time. It too opens in the active Space, not the assigned Space.
I've tried this with the "When switching to an application, switch to a space with open windows for the application" checked and unchecked and it makes no difference.
Am I missing something? Is this the way it's supposed to work?

Sometimes if you open a PDF through a web browser it opens as a window in the browser rather than the app. I don't have Acrobat or use chrome but if I open a PDF from a web site in Safari it just opens as a page in Safari rather than in Preview. Therefore if I assign Preview to a certain space and open a PDF in Safari it will open in any space that I have assigned to Safari. Or the active space if I haven't assigned any.

I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.

I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.

OK....I'm stumped. The message you are seeing is typically there to protect someone from syncing with a different computer/iTunes account. Is there any way anyone else has used your iPad and possibly connected it to their computer?

SPACES: Can I have same program, different docs in different Spaces?

I'd like to have one OmniOutliner document open in Space #1, and a different OmniOutliner document open in Space #2. But I haven't yet figured out how to do this. Is there a way for me to have two different documents from the same program open in two different Spaces?

Spaces are generally designed to house a specific application in a specific space.
You can try dragging one of your documents to another space, provided that OmniOutliner hasn't been assigned to a certain space, however it is an application, not window based function.

Photoshop not seeing export color space setting in Lightroom 4

MY LR or PS programs are not acting as expected.
When my Lightroom 4 is set to export to Photoshop in either the sRGB color space or the AdobeRGB color space, and Photoshop is set for the sRGB space, Photoshop gives a color mismatch error in both cases, saying the image is an AdobeRGB embedded image. However, if the color space in PS is set for AdobeRGB, even if the export setting in Lightroom is sRGB, there is no mismatch error.
Apparently, PS sees every image as embedded with AdobeRGB.
I have a Sony NEX6 camera. I have taken pictures in the camera sRGB color space and the AdobeRGB space, which I used for this test. Since I shoot in RAW, this should not matter, so I don’t think it is the issue, and, in fact, I get the same result no matter which color space the camera is in.
If LR export and PS color space are the same, why should there be a mismatch, and why is PS not seeing the sRGB space? Might there be a setting in Lightroom or Photoshop that I am missing?

howdego wrote:
I am, however, trying to decide on the right color space to use, which is how I noticed this problem. I rarely make prints of my photos. I make bluray movies using Proshow Producer. I recently got a new monitor and Samsung LED HDTV, and found that my photo videos did not display right and I am trying to find out why. I found the normal viewing settings of the TV have too much color and sharpness, so I established another group of settings for photos, which helped. However, I am still not satisfied.
These are two separate but related issues.
1) It's almost impossible to get accurate Color and Luminance level rendering inside LR if you don't use a hardware monitor calibrator to adjust your computer monitor.
2) LCD TV's use settings to "enhance" color, brightness, and contrast that is usually very, very inacuuarte. But this is what most non-photography people seem to like so TV manufacturers crank up the "default settings." I also have an older 52" Samsung TV (LN-T5265F) that I've manually adjusted for more accurate color. Try using the 'Movie' mode, which is the most accurate mode and turn the Backlight setting down. Here are the settings I use with my Samsung TV. I assume your Samsung TV's controls are similar:
Setup Screens
HDMI 1 (Cable Box) & Coax (Cable)
HDMI 2 (Panasonic Blu-Ray Player)
PICTURE - 1
Movie
Standard
Dynamic
Movie
Standard
Dynamic
Contrast
82
82
82
82
82
82
Brightness
43
45
45
43
45
45
Sharpness
25
25
35
15
15
25
Color
42
45
45
44
45
45
Tint
77 R
77 R
84 R
77 R
77 R
84 R
Backlight
5
6
7
5
5
6
PICTURE - 2
Color Tone
Normal
Normal
Normal
Normal
Normal
Normal
Detailed Settings
Black Adjust
Off
NA
NA
Off
NA
NA
Dynamic Contrast
Low
NA
NA
Low
NA
NA
Gamma
-1
NA
NA
-1
NA
NA
Color Space
Auto
NA
NA
Auto
NA
NA
White Balance
R-Offset
13
NA
NA
13
NA
NA
G-Offset
15
NA
NA
15
NA
NA
B-Offset
17
NA
NA
17
NA
NA
R-Gain
15
NA
NA
15
NA
NA
G-Gain
12
NA
NA
12
NA
NA
B-Gain
17
NA
NA
17
NA
NA
My Color Control
Pink
15
NA
NA
15
NA
NA
Green
15
NA
NA
15
NA
NA
Blue
15
NA
NA
15
NA
NA
White
15
NA
NA
15
NA
NA
Edge Ehnacement
On
NA
NA
On
NA
NA
xvYCC
Off
NA
NA
Off
NA
NA
Digital NR
Low
Low
Low
Low
Low
Low
Active Color
Off(NA)
Off(NA)
Off
Off(NA)
Off(NA)
Off
Dnie
Off(NA)
Off
Off
Off(NA)
Off
Off
SETUP - Screen 2
Energy Saving
Off
Off
Off
Off
Off
Off
SETUP - Screen 3
HDMI Black Level
Low
Low
Low
Low
Low
Low
Film Mode
Off(NA)
Off(NA)
Off(NA)
Off(NA)
Off(NA)
Off(NA)
howdego wrote:
So it occurred to me that some colors might be wrong, or too saturated, because I am not seeing them on my monitor as they will appear on the HDTV. I am thinking that since sRGB is my final color space, I would try to do everything in the sRGB space, including setting my monitor to sRGB (I have a Dell 2413 which supports adobeRGB too). I was inn the process of trying this when I found the issue at hand. Might you have any thoughts about this color space choice
If you have a wide-gamut monitor you are better off using it in Adobe RGB mode with a monitor calibrator. But then the monitor will not look correct in non-color managed applications:
http://www.gballard.net/photoshop/srgb_wide_gamut.html
You can circumvent this issue by using your monitor in sRGB mode, but I'd still suggest you use a hardware monitor calibrator. Either way it is imortatnt that you have a proper monitor profile assigned in Windows or OS X Color Management. The monitor manufacturer provides these, but they don't always work well with LR for numerous reasons.
To insure the best image quality you should do all of your editing in PS using 16 bit TIFF with ProPhoto RGB profile format until you are ready to Export. For use with ProShow you can use TIFFs or JPEGs, but use sRGB color profile to avoid any color management issue. JPEGs are fine and a LR Quality higher than 80 (10 in PS) is a waste of disk space for slideshow images.
In short you've got a lot of "variables" between the uncalibrated monitor and out-of-the-box non-adjusted TV. The former requires a good hardware calibrator aad the latter a good "eye" to adjust it.

NOT ABLE TO ASSIGN MO:OPERATING UNIT PROFILE VAL TO A RESPONSIBILITY

I am trying to create new orgnization and assigning parameters in AP. I am not able to assign profile values. Could you pl. clarify foll points..
To generate seeded data, it is displaying(in the concurrent program) existing operating unit in the LOV not the new Operating unit that I created.
When i try to associate new Responsibilty to MO operating unit level, it is displaying existing organization not newly created org.
NOt able to assign profile values to business group(field is protected against update) as I created new ORG not with "setup Business Group".
When i click legal entity parameter in operating unit, it is displaying
"NO ENTRIES FOUND FOR LIST OF VALUES"
I would appreciate your early response
Thanks
Ven.
[email protected]

Hi Nagamohan
Your query returned me the seeded ones:
GL_AUTO_ALLOC_WF_PKG
PA_AUTOALLOC_WF_PKG
We have a value at the site level, and at the 1st OM super user responsibility having the issue has no default value, hence defaulting the value from the site level.
The other OM super user responsibility has a value. And this value is defaulted to the 1st OM responsibility profile from time to time.
The other responsibility OM Administrator have no problem. This value changes when the users logged into this OM super user responsibilities (both OU), the value switches back and forth to 2nd OU value and then the site level value fills the value for the 1st OM super user responsibility(even though we didn't have any default value before).
If the users logged into 1st OM Administrator responsibility to process the orders, then no problem, the value stays to the correct OU).
We have been relying on the defaulting value(coming from the site level) for all this time and have had no problems until now. It was always blank for the 1st OM super user. but, when the problem started then only it's having issue. I manually deleted the value (wrong value from the other OU) at the 1st OM Super user level, then next time the user logs into the 1st OM Super user resp, then it's having the correct value(same as site), and keep on updating the value with this correct value. But, all of a sudden it changes to the wrong OU value, don't know what object is causing this...
Thanks
Radhika

Control does not stay in case structure while using motion VIs

Hi,
I have a motion control card PCI 7344 connected to my PC. I am able to control the motor at the required speed till the required position using an encoder. Now I have put my motion control VIs in a case structure in such a way that, if Case1 is selected then the motor should to position P at speed S, if case 2 is selected then the motor should move to position Q at speed S and if case3 is selected then the motor should to position R at speed S. I am selecting cases 1,2,3 etc. by scanning a set of numbers seperated by spaces which look like this,
1 2 5 7 3
This number scanning is done using a while loop. Now, when the first number is scanned in the above set of numbers. The number 1 is obtained and the control is switched to case1. But before the motor reaches position P, the control switches to case2 and before completing the execution, the program scans case5 and so on. That means that the control does not stay till the move in the case 1 is completed. I'm sure there must be a way to retain the control to a case and stop the next number to be scanned before the functions in the particular are completely executed. I thought of one method, i.e. by using the move complete VI provided in LabVIEW, but I could not implement it. Please help me out with this.
Regards,
Giridhar Rajan
Automation Engineer,
Cruiser Controls,
Mumbai, India

Hi,
Our motion controllers allow you to preemptively start a move in the middle of a current move. For example if you are moving from point A to B and based on some logic, you determine you need to immediately start moving to point C. A preemptive move allows you to just load the new target position and call start. You do NOT have to first stop the current move and then start the new move.
In your case, you want the first move to complete before the second move starts. There are two ways to handle this. First, wait for the move to complete via a Wait For Move Complete function/VI call, or use the Check For Move Complete function/VI in a loop. Second, use Blend Start instead of the regular start. A Blend Start (if blend factor is set to 0) waits for the first move to complete before the second move starts.
Check out the help topics for Start Motion and Blend Motion to learn more.
Thanks,
Rodger S.

CPIC-CALL Transaction program not registered Error while creating RFC Desti

Hi All,
I am trying to create a new RFC Destination.
Details I have provided are..
1.RFC Destination Name
2.Connection Type - TCP/IP
3.Description
4. Activation Type - Registered Server Program.
5.Program Id.
6. Gateway Host and Gateway Service.
But When I Test the connection, I am getting the following error.
<b>" program xyz not registered / CPIC-CALL: 'ThSAPECMINIT'# Transaction program not registered"</b>
However I was able to create and connect RFC Destinations successfully previously.
I am not SAP guy. Could someone help resolve this issue.
Thanks,
Phani

hi Sekhar,
I request you to please help me out in this issue. I am getting similar kind of problem. I am trying to replicate the customer from CRM to R/3 and i get a bdoc message in SMW01 that "RFC connection failed please press the save button again". When the basis team further investigated they came up with the below error..
User: CRREMOTE (Client: 071)
Destination: OCR (handle: 1, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1462
CPIC-CALL: 'ThSAPECMINIT'
Transaction program not registered
DEST =OCR
HOST =%%RFCSERVER%%
PROG =dpssrfc
Trace file opened at 20061121 140451 EST SAP-REL 640,0,109 RFC-VER
3 804778
resize I/O buffer to 28000 bytes
>>>> [2] MQ_LINK : TCP <ac: 3> K %%RFCSERVER%% >>> OPEN
{45632F14-288E-0046-0000-0000A888A7AA}-
======> CPIC-CALL: 'ThSAPECMINIT'
can you please tell me where can be probelm. Regarding your message, where can i get the communication channel to assign the program id.
Awaiting your reply,
Thanks & Regards,
Yogesh

FRM-10142 The Http Listener (Dos Window Does not Stay Open)

Dear Sir
URGENT
When I start OC4J instance its dos window open for few seconds and after that its closed.
I mean OC4J instance dos window des not staying open at task bar.In oracle 10g forms builder and 11g database
Please guide me how this problem would be solve...?
Yassen

For URGENT questions go right to https://support.oracle.com and file a Prio 1 SR with Oracle Support. For everything else I don't see why your question is more urgent then others.
Did you check if maybe the port OC4J runs on (8889) is already used by another program (netstat)? Did you check the logfiles?
cheers

Field symbol has not yet been assigned. ???

Dear Experts ,
W hen i tried to execute my program this error appears :
Short text
    Field symbol has not yet been assigned.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSLVC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
and Here is my CODE :
*& Report ZPO
Report ZPO1.
type-pools slis.
PARAMETERS : PO_Doc like EKBE-EBELN DEFAULT '4800000007'.
PARAMETERS : Plant TYPE WERKS DEFAULT '1000'.
PARAMETERS : PO_ORG TYPE EKORG DEFAULT ''.
data TtlS type mara-wesch .
data TtlH type mara-wesch .
data Ttl type mara-wesch .
data ZEKBE type TABLE OF EKBE.
data ZEKBER type EKBE.
data ZEKPO type TABLE OF EKPO.
data ZEKPOR type EKPO.
data ZEKKOR TYPE EKKO.
data ZNAME1F type LFA1-LIFNR.
data ZWGBEZF TYPE T023T-WGBEZ.
data i type n.
data counter type n.
types : begin of SBAGDS,
Serial Type n, "Purchase Order
EBELN like EKKO-EBELN, "Purchase Order
MATNR like EKPO-MATNR, "Material
TXZ01 like EKPO-TXZ01, "Short Text
MATKL like EKPO-MATKL, "Material Group
WGBEZ like T023T-WGBEZ, "Material Group Desc"
SUBMI like EKKO-SUBMI, "GPM
CHARG like EKBE-CHARG, "Batch
LIFNR like EKKO-LIFNR, "Vendor
NAME1 like LFA1-NAME1, "Vendor Name
RECV like mara-wesch, "Received Quantity
REVR like mara-wesch, "Reversed Quantity
DELV like mara-wesch, "Delivered Quantity
end of SBAGDS .
DATA : BAGDS TYPE SBAGDS OCCURS 0 WITH HEADER LINE.
data Struc like BAGDS.
data: gr_table like BAGDS OCCURS 0 WITH HEADER LINE.
data: gt_fieldcat type slis_t_fieldcat_alv, gt_outtab type SBAGDS occurs 0 with header line.
INITIALIZATION.
i = 0.
counter = 0 .
perform field_cat_init using gt_fieldcat[].
FORM field_cat_init using rt_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv,
         pos type i value 1.
clear LS_FIELDCAT.
*Column 1
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'Serial'.
ls_fieldcat-SELTEXT_L      = 'Serial'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 2
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'EBELN'.
ls_fieldcat-SELTEXT_L      = 'Purchase Order'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 3
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'MATNR'.
ls_fieldcat-SELTEXT_L      = 'Material'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 4
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'TXZ01'.
ls_fieldcat-SELTEXT_L      = 'Short Text'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 5
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'MATKL'.
ls_fieldcat-SELTEXT_L      = 'Material Group'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 6
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'WGBEZ'.
ls_fieldcat-SELTEXT_L      = 'Material Group Desc'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 7
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'SUBMI'.
ls_fieldcat-SELTEXT_L      = 'GPM'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 8
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'CHARG'.
ls_fieldcat-SELTEXT_L      = 'Batch'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 9
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'LIFNR'.
ls_fieldcat-SELTEXT_L      = 'Vendor'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 10
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'NAME1'.
ls_fieldcat-SELTEXT_L      = 'Vendor Name'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 11
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'RECV'.
ls_fieldcat-SELTEXT_L      = 'Received Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 12
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'REVR'.
ls_fieldcat-SELTEXT_L      = 'Reversed Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 13
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'DELV'.
ls_fieldcat-SELTEXT_L      = 'Delivered Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
endform.
START-OF-SELECTION.
       select SINGLE * from EKKO into ZEKKOR where EBELN = PO_DOC.
       select SINGLE * from EKPO into ZEKPOR where EBELN = PO_DOC.
       select SINGLE NAME1 from LFA1 into ZNAME1F where LIFNR = ZEKKOR-LIFNR.
*         ' Buliding Structure
          Struc-EBELN = ZEKPOR-EBELN.
          Struc-SUBMI = ZEKKOR-SUBMI.
          Struc-LIFNR = ZEKKOR-LIFNR.
          Struc-Name1 = ZNAME1F.
       select * from EKPO into TABLE ZEKPO where EBELN = PO_Doc and WERKS = plant.
       LOOP at ZEKPO into ZEKPOR.
           select SINGLE WGBEZ from T023T into ZWGBEZF WHERE MATKL = ZEKPOR-MATKL .
           counter = counter + 1.
*         ' Buliding Structure
          Struc-Serial = counter.
          Struc-MATNR = ZEKPOR-MATNR.
          Struc-TXZ01 = ZEKPOR-TXZ01.
          Struc-MATKL = ZEKPOR-MATKL.
          Struc-WGBEZ = ZWGBEZF.
*          Calcualting Debit transactions from PO History
           select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'S'.
           LOOP AT ZEKBE INTO ZEKBER.
               TtlS = TtlS + ZEKBER-MENGE.
           ENDLOOP.
*          ' Buliding Structure
           Struc-CHARG = ZEKBER-CHARG.
           Struc-RECV = TtlS.
           Ttl = TtlS.
           clear TtlS.
*         Calcualting Credit transactions from PO History
         select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'H'.
           LOOP AT ZEKBE INTO ZEKBER.
               TtlH = TtlH + ZEKBER-MENGE.
           ENDLOOP.
*          ' Buliding Structure
           Struc-REVR = TtlH.
*          Calculating Total Delivered
           Ttl = Ttl - TtlH.
           clear TtlH.
*          ' Buliding Structure
           Struc-DELV = Ttl.
           clear Ttl.
*      Writtng ITAB
       APPEND Struc to BAGDS.
       ENDLOOP.
*      Reading ITAB
*       WRITE : / , 'ITAB Begin : '    .
*       loop at BAGDS into Struc.
*         counter = counter + 1.
*         write : /,'Serial : ',counter.
*         write : / ,'PO : ',Struc-EBELN.
*         write : / ,'Vendor : ',Struc-LIFNR.
*         write : / ,'Vendor Name : ',Struc-NAME1.
*         write : / ,'Material : ',Struc-MATNR.
*         write : /,'Short Text: ',Struc-TXZ01.
*         write : / ,'Model : ',Struc-MATKL.
*         write : / ,'Model Desc : ',Struc-WGBEZ.
*         write : /,'GPM : ',Struc-SUBMI.
*         write : /,'Lot : ',Struc-CHARG.
*         write : /,'Received : ',Struc-RECV.
*         write : /,'Reversed : ',Struc-REVR.
*         write : /,'Delivered : ',Struc-DELV,/,/,/.
*       ENDLOOP.
* Call ALV Grid Viewer
*BREAK-POINT.
gr_Table[] = BAGDS[].
   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
             I_STRUCTURE_NAME   = 'SBAGDS'
             IT_FIELDCAT          = gt_fieldcat[]
        TABLES
             T_OUTTAB                  = gr_Table.
Please Advise
Edited by: Sap Sap on Jul 27, 2009 12:18 PM
Edited by: Sap Sap on Jul 27, 2009 12:22 PM
Edited by: Sap Sap on Jul 27, 2009 12:22 PM

Hi,
The problem seems to be in your ALV grid display.
The reason must be your field catalog.
Just check your fieldcatalog.
The value in the fieldname field of the fieldcatalog should be same as the fieldname in your internal table and should be in capital letters.
Probably you must have mistyped some field.
Kinldy check.
Regards,
Ankur Parab

Screen variant not working when assigned to transaction variant in SHd0

Dear All,
User requires tax code column for line items in MIRO to be made non-editable. I am using SHD0 transaction for the same. I am able to make the column grey-off by creating screen variant. The program is SAPLMR1M and screen number 6310. When tested individually thru SHD0 the variant is working perfect. But it is not working when assigned to a transaction variant. Any clues on the same would be really helpful.
Thanks in advance
Komal

Hi,
Try to record again for the whole set of screens instead of doing that for the individual tax screen and only for the tax screen make the required field disable.
Once done and saved, you can see all the screens variants in the transaction variant.
Use the Change WITH PROCESSING OPTION.
Hope this solves your problem
Regards
Shiva

My Itunes will not stay open, I have uninstalled it and reinstalled it and it still won't stay open

My Itunes will not stay open. Everytime I open it it just gives me a wait signal and then closes down on it's own. I have uninstalled it and reinstalled it and it still won't stay open.... what should I do now?

Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

Not able to single space in dreamweaver CC

I am not able to single space in dreamweaver CC. i try hitting shift+enter like i have in the past n now it dont work. I am using the software on a mac.

Try clearing the program cache and/or restoring preferences. I've seen that work for others with the same problem...
Deleting a corrupted cache file
Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6

Programs not staying in assigned spaces

Similar Messages

Maybe you are looking for