Programs try to send ARP broadcast to 32.2.192.88

Hi,
I have a new Lenovo T400, Windows Vista operating system with all usual Lenovo/IBM-programs installed. The only program installed further is Norton Internet Security 2008.
My problem is, that my computer tries to send ARP-broadcasts to 32.2.192.88 and I dont know why. It starts even with no Ethernet-Connection (so no virus possible). That wouldnt be so bad, but I am in a very strikt network in which I get locked down, when my computer does this.
I also tried to track the broadcast with my firewall. Unfortunetly it thinks, that the broadcasts is started by any program with tries to connect to the internet, so I cant figure out wich program it really is. Locking down all System-Services on startup didnt solve the problem.
I guess, that this problem has something to do with installed Lenovo-Software, because I am the only Vista-User in my Network with this problem and Norton Internet Security 2008 worked fine on my old notebook.
I hope somebody here has any idea.
Greetings
Kratze

Are your clients pointed at an internal DNS server, or your ISPs ?
If it's not a DNS server within your LAN (192.168.0.0/24), or (for example) you point them at your router which itself is using your ISPs DNS servers, this will be seen as a disallowed relay attempt.
On one of your clients, fire up the Terminal (Applications/Utilities) and type in:
dig youontheweb.net
What IP comes back for the answer ?
As for Jeff's suggestion, please note:
whatmask 192.168.0.0/24
TCP/IP NETWORK INFORMATION
IP Entered = ..................: 192.168.0.0
CIDR = ........................: /24
Netmask = .....................: 255.255.255.0
Wildcard Bits = ...............: 0.0.0.255
Network Address = .............: 192.168.0.0
Broadcast Address = ...........: 192.168.0.255
Usable IP Addresses = .........: 254
First Usable IP Address = .....: 192.168.0.1
Last Usable IP Address = ......: 192.168.0.254
whatmask 192.168.0.0/32
TCP/IP NETWORK INFORMATION
IP Entered = ..................: 192.168.0.0
CIDR = ........................: /32
Netmask = .....................: 255.255.255.255
Wildcard Bits = ...............: 0.0.0.0
Network Address = .............: 192.168.0.0
Broadcast Address = ...........: 192.168.0.0
Usable IP Addresses = .........: 0
First Usable IP Address = .....: <none>
Last Usable IP Address = ......: <none>
It was necessary to change your subnetting/netmask from /32 to /24 as you can see. With a CIDR setting of 24 (subnet mask of 255.255.255.0) the available IP range is 192.168.0.0 - 192.168.0.255.
See http://www.postfix.org/basic.html#mynetworks

Similar Messages

Outlook 2010 address book prompt out hen trusted program try to send email through Outlook 2010

Dear all,
My program will send email through Outlook 2010(in cache mode). Sometime it may prompt the address book out and pend here, and we need to manually click "OK" to let the program run again. Although we re-write the program in
Java and send by JavaMail now, but we are interested why the address book will prompt out.
There are no pattern that we can guess the reason. Different recipient, different subject/content/have attachment or not can casue the address book prompt. But same email with same content/everythings may not cause prompt before and/or after.
We try to change to offline address book and need manual sync, problem still occur.
Just for interest~
Cyrus
[Sorry that MSDN not allow me to upload the cap screen :( ]

Firstly, there is no such thing as a "trusted program" to Outlook. It only trusts COM addins, all other applications will cause a security prompt unless you have an up-to-date anti-virus app installed (if you can control the client environment).
See http://www.outlookcode.com/article.aspx?id=52 for the list of your options. Essentially it is either installing an antivirus product or using a library such as
Redemption (accessible from Java) or a utility such as
ExpressClickYes.
Dmitry Streblechenko (MVP)
http://www.dimastr.com/redemption
Redemption - what the Outlook
Object Model should have been
Version 5.5 is now available!

My Mac Mail program no longer stores any files in my Sent folder. When I try to send an e-mail it just spins. What's up?

My Mac Mail program no longer stores any files in my Sent folder. Moreover, the sent folder (off to the left) contains a highlighted "1" as if something is in there.
When I try to send an e-mail message, it simply spins.
This is new behavior for my Laptop of three years. Usually, I have lots of messages in my Sent folder and can easily send e-mail.
I see no discussion forum for "Mail" or for "e-mail" so I raise this question here.
I would appreciate any help anyone might offer.
Thanks.
norman from akron

Thank you for your reply. Turns out, re-started my Macbook later and the problem disappeared. Could this have helped?

Re I-Movie. "Communication Error" is what I get when I try and send a clip from my Sony camera to the IMovie program in my IMAC 2008 Intel Chips. The IMovie program has worked well for several years - up to now. What has gone wrong?

Re I-MOVIE. I am getting a "Communication Error" when I try and send a clip to the IMovie
program in my IMAC 2008 Intel Chip computer. This is the first time in 3 years that the
program has not worked. What has gone wrong?

Hi
Have no idea - But if it is a new problem with exactly the same kind of material that was previously used. Then my trouble shooting guide might help.
If You
• used a new Camera - file codec might be a sort that don't work
• Your main hard disk might get too filled up
Else try
Trouble
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

When i try to send a photo with i photo the program sends always the same one, what can i do?

When i try to send a photo by iphoto share, the programm always sends the same one. Why? What can i do?

What version of iPhoto?
For iPhoto '11 IMHO the best solution is to set Mail as your email client in the iPhoto preferences
LN

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your help

I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field.

I keep receiving an error message when I try to send an adobe document through Outlook email.

I keep receiving an error message when I try to send an adobe document through Outlook email.
The message is : Either there is not default mail client or the current mail client cannot fulfill the message request. Please run Microsoft Outlook and set it as the default mail client.
I have checked everywhere on my system and changed Microsoft Outlook as the default mail program but nothing is helping. Does anyone have any ideas?

I am having the same issue, just replied to a different post on the issue. I am running Acrobat X Pro with Win 7 Pro 64-bit. This is a new PC, but my last PC was a 32-bit OS and I didn't have this issue. I was suspecting that it is due to the 64-bit OS.
Reading this post though, I am starting to wonder if there isn't something else going on. When I go to Edit>Preferences, I don't have anything related to email under Categories, or even within any of the categories listed. I am I missing a plug in or something? Or is this a component of a previous version of Acrobat?
I tried to attach a screenshot of the error message but getting a new error while trying to attach! File is only 25kb! Will have to live without i guess.

Solaris 10 jumpstart: Client sends ARP with old IP address

Solaris x86 Client machine\s ip has been changed.
But during jumpstart, it sends ARP from its old ip.
Where does it picks this ip from?
how to clear it?

Well a couple of things to try (if not done already) would be:
a) Check out a dhcp server if you have that installed
b) Attempt to identify and dns server etc referencing the old ip.
c) rm_install_client and add_install_client ... though this is obviously disruptive.
Look down the add_install_client man page for clues ... http://docs.oracle.com/cd/E19082-01/819-2240/add-install-client-1m/index.html ( i haven't checked if this is the latest).

Try to send e-mail

Hello everyone! I try to send e-mail but get error. See attachments. Please, help me.
Attachments:
Send e-mail.JPG ‏21 KB
Error.JPG ‏55 KB

TECHNOFASE wrote:
Hello
i get the error -7 when is send this mail.
_tmp1 = InetSendMail ("smtp.gmail.com", "[email protected]", "[email protected]", "Test Mail", "Prova", "");
I create the mail with gMail but i can't send it.
I try to send the same mail with LIVE MAIL and i send it (so no problem by the Mail Server).
Can somebody help me ?
Regards
You have posted to the wrong forum. InetSendMail is a LabWindows function. This is the LabVIEW board, which is the graphical programming language. You need to post in the LabWindows board, which I see you've already done

G5 crashes when I try to send files via iCHAT

No idea whats causing it but when I try to send files via ichat it gets about 10mb in and then the machine crashes....
Don't think its to do with my broadband connection as this seems stable and am not running any other programs in the background.......Desparate to sort this -please help.

Hi Mart06,
Welcome To The Apple Discussion Pages.
I can not find anything on the AIM site that suggests there is a Limit on file sizes.
The largest one I have tried myself was 9.2Mb
The closest thing I could find to the point in question was the last question on this page.
If the file is not stuffed so far you could try that to make it smaller.
I have AIM 4.7 for Mac and can not see any info in the Help there about any limit to the size of File Transfers.
4:12 PM Wednesday; March 8, 2006

EEM send UDP broadcast

I need an "action" statement that will send a UDP broadcast to port 1001 with a message of "restart". I have the rest of the EEM script created fine. I cannot seem to figure out how to do this. I have a BGP route that changes every once in a while and when it does the application seems to stop functioning correctly. A restart of the application fixes the issue. The vendor says that if I can send the UDP broadcast then he can program it to see the broadcast and restart iteself. I have created an EEM script that sees the syslog "%BGP-5-ADJCHANGE:" and currently sends an email. BUt we have to manually restart the app. If this is not possible within EEM could it be done with a TCL script and the EEM call the TCL script?
I appreciate any words of wisdom. Thank you in advance.

EEM currently does not support UDP. Yes, a tclsh called from EEM could do this assuming you have a new enough IOS. The UDP extension is documented at
http://www.cisco.com/en/US/docs/ios-xml/ios/ios_tcl/configuration/12-4t/nm-script-tcl.html .

TS3276 I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone

I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?

Thank you for heading me in the right direction. I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information). I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)?? In the Advanced box I clicked on "Use custom port: 465" and checked "Use Secure Sockets Layer." Authentication: Password; I have correct User Name and Password put in. After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there.
What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message: "Cannot send message using the server smtp.att.yahoo.com (etc.). The SMTP server doesn't support TLS(SSL) on port 587. Verify your account settings and try again." That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails. I guess my next step is to contact my email service provider, AT&T, and see if they can help me. Thanks, again, for taking the time to respond and for giving me your input! Much appreciated!

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please help. I have tried lots of things now and cannot solve it.

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please can someone help. I have tried lots of things now and cannot solve it.

"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done.

I have downloaded the latest pages update on my iPad, but my iMac still has version 4.3 and I cannot find out how to update it only desktop. When I try to send something from my iPad pages to via email to be opened on my desktop in Pages, it won't open P

I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?

The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
Or contact AppleCare. They made this mess, let them fix it.

When I try to send email from my iPad and iphone it says that I have the incorrect username and/or password, but I know they are correct, can someone help me?

When I try to send email from my iPad and iPhone it says that I have the wrong username and/or password, but I know they are correct. Can someone help me?

"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done.

Programs try to send ARP broadcast to 32.2.192.88

Similar Messages

Maybe you are looking for