Programs will not open. The button in the lower left corner of the screen continuously blinks.

Whenever I open Firefox on my other laptop I cannot get into any programs. The icon in the lower left corner of the screen that lets you know when a program has completed loading just blinks constantly.

Got the exact same problem aswell, finally fed up with it now as i just started up firefox and 14 new windows opened because of this bug, luckily my computer can handle them but someone with a slower processor it would have been a nightmare, needs fixing ASAP.
Reverting back to 3.6.3 until this issue is solved. (link for anyone wanting to do the same below)
http://www.filehippo.com/download_firefox/7345/

Similar Messages

  • HT6114 I have upgraded to OS X Mavericks and my MacBook keeps crashing and my numbers and pages programs will not open as they are being updated continuously.

    I have upgraded to OS X Mavericks and my MacBook keeps crashing and my numbers and pages programs will not open as they are being updated continuously

    The next time the crash happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t  post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

  • Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open all other programs work fine

    Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open, but all other programs i have been able to open just fine

    Moving this discussion to the Bridge General Discussion forum.

  • I have a Mac running OS 10.5.8. I downloaded Firefox 4 and not the program will not open at all. I am also unable to download the previous version that was running fine. I'm using Safari to contact you.

    I have a Mac G5 running OS 10.5.8. I downloaded Firefox 4 and now the program will not open at all. I get an error message that reads --
    "You cannot open the application 'Firefox" because it is not supported on this architecture."
    I am also unable to find a link to download the previous version (3.6) that was running fine. (I'm using Safari to contact you.)

    Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
    My solution; very simply use timemachine to restore the previous Frefox 3.x
    worked great in 3 mns

  • Pages is not responding, the icon comes up but the program will not open????

    Pages is not responding, the icon comes up but the program will not open????

    You have to give us some more information or do a search in the forum for answers on the same matter.

  • I Just bought iMovie for yosmite and the program will not open.. I will like a fix or a refund..

    I Just bought iMovie for yosmite and the program will not open.. I will like a fix or a refund.. i am getting tired of these problems...

    Welcome to the world of downloaded software. There are no refunds.
    Back in the good old days when software was purchased on disk one could sell it (legally).
    Please describe your problem.  Give us some details to go from.   Are you using iMovie 06, or something newer?

  • Sent long message 4s now message program will not open. Tries to load but returns to the home screen after a while

    Sent long message 4s now message program will not open. Tries to load but returns to the home screen after a while. How can I open my messages?

    close all backgrounded apps, and then try,if it crashes again then do a reset all settings

  • I have Acrobat XI on a PC and have received a Fatal Error message indicating that "Acrobat failed to connect to a DDE Server."  Acrobat will not open now.  How do I regain access to the program?

    I have Acrobat XI on PC.  After trying to convert a webpage to PDF, I received a Fatal Error message indicating that "Acrobat failed to connect to a DDE Server."  Now, the program will not open.  How do I regain access to the program?

    I have Acrobat XI Pro and have been experiencing all sorts of "freeze ups" with it ever since Adobe released the new Acrobat DC the other week.  I see that an automatic update was pushed down to my Acrobat XI Pro at the same time.  Is this the first issue you have encountered with your Acrobat XI, or have you been having other issues suddenly as well??  Just wondering ...

  • My AI program (CS5 Illustrator 15.1.0) will not open some PDFs. It was working just yesterday, but now will only open a PDF if the graphics of the PDF is visible in the box that appears in the lower left corner of the dialog box after you click Open. The

    My AI program (CS5 Illustrator 15.1.0) will not open some PDFs. It was working just yesterday, but now will only open a PDF if the graphics of the PDF is visible in the box that appears in the lower left corner of the dialog box after you click Open. The file size does not seem to matter. Any ideas?

    Hello Kathie,
    Sorry for the inconvenience that has caused to you.
    Please let me know if you have tried converting any other PDF to word with Reader.
    Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
    Let me know if this converts fine.
    Hope to hear from you.
    regards,
    Anubha

  • I open Acrobat X Pro and it open and shut down, now it will not open at all what can I do to correct the problem?

    I open Adobe Acrobat X Pro and it open but shut right down and now it will not open at all what can I do to correct the issue?

    Hi shortydm1964,
    Please follow the steps given below:
    1.Delete all the files from following folders:
    2.C:\ProgramData\Adobe\SLStore
    3. C:\Program Files (x86)\Common Files\Adobe\SLCache
    4. And, delete all files from following folder except cache.db
    5. C:\Program Files (x86)\Common Files\Adobe\ Adobe PCD
    Now, launch the product and activate again with a new serial number.
    I hope this would resolve your issue.
    Regards,
    Anubha

  • I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12  file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    Change browsers. See what happens.
    Be well...

  • 7515 Program will not open

    I have an HP 7515 All-in-One printer. I have uninstalled and reinstalled the operating programs on my Dell XPS 8700 Win7 Pro several times and it says everything is working the way it should but when I click on the desktop icon, the program will not open. I need to print an address on an envelope so I need to get into this program. Any suggestions?

    Hello DavidBez,
    Welcome to the HP Support Forums!
    I'd like to help get your Photosmart 7515 up and printing from your computer. I am not aware of an area in the printer software that is installed on the computer's Desktop that allows you to print an envelope, but I hope this helps get the icon working again.
    HP Printer Assistant Opens the 'Printer Setup & Software' Window<---
    If the above fails to resolve the issue with the software, run the Print and Scan Dr and let me know its results.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • My adobe CS2 programs will not open on my macbook pro osx 10.5.8

    Today my adobe cs2 suite programs will not open.  They were working just fine a couple of days ago.  And they have worked fine for years.  I did not update to any new os that would cause them not to work.  I really need to get some image work done soon and this is a real monkey wrench in my plans.  I uninstalled everything and tried to reinstall from the disc and it would not let me do that either.  I tried to download picasa just as a quick alternative to get some images edited tonight and it would not let me open that either, even though it said it was good for 10.5 or above.  So the only thing I can think of is that I downloaded something that changed some settings? 

    Try http://www.lemkesoft.com/ GraphicConverter instead.
    Mackeeper can also be a problem:
    https://discussions.apple.com/docs/DOC-3036

  • Programs will not open from Dock

    I have updated my Macbook Pro with Yosemite which has led to - a lot. Programs will not open from Dock, they are just revealed in Finder. Scrolling with mousebuttons in a browser will zoom instead of scroll, the courser will not change after changing tool in Indesign. Just to mention a few problems i have discovered so far. I think I was an idiot to uppgrade to Yosemite. PLEASE HELP!

    Open Disk Utility and Repair Permissions, then quit DU and Restart the MBP.  If that does not clear the issues, restart again holding the Command and R keys, and from Utilities on the menu bar select Install Mac OS X.  That will reinstall Yosemite but leave your content and settings intact.  See if that repairs whatever is broken.

  • TS2518 updated to Aperture 3.4, but program will not open, keeps telling me it needs to restore windows?

    I just updated to OS X 10.7.5 and Aperture 3.4, but program will not open, keeps telling me I to restore windows

    Quit Aperture, if it is running/ hanging.
    Remove the file com.apple.Aperture.plist from the folder
    Your home folder  > Library > Preferences
    The User Library is hidden by default. You can reveal it from the Finder's "GO" menu:
    Finder > Go,   then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences" sub folder and remove the file
    your Home Folder/Library/Preferences/com.apple.Aperture.plist.
    After removing the user preferences file, you will have to reset the Preferences, you selected in Aperture's preferences panel.
    Regards
    Léonie

Maybe you are looking for

  • Highlighting  Source Data When Chart is been moved to Another Sheet?

    Hi, I know that when a chart is chosen, it's corresponding data becomes highlighted when the two (table and chart) are on the same sheet. Is there a way to highlight the data when the two are on separate sheets, so one could toggle between the two sh

  • [CS3] [JS] add XML  Element to Insertion Points

    hi list, i'll do some text parsing in indesign cs3 intended to add some xml elements to my document. i just wonder why i can't markup an insertion point. is the following approach correct? The code works fine, only the return value (stored in the _xm

  • SSMS Pivot With Dynamic Columns

    SSMS Pivot I found this Microsoft article for creating crosstab-like queries in SSMS. Is it possible, however, to create this same query if I do not know what the values for the columns will be?  Using their example for my problem, I will not know wh

  • The application does not start automatically on restart

    SPO web apps fail to start correctly when Netweaver is restarted.  I have to manually stop and restart the SPO web apps via the Visual Administrator.  This seems to be a timing issue with the JDBC connection pool.  During the attempted automatic, spo

  • Displaying code in a wiki

    Does anyone know if there is a convenient way of displaying source code on a wiki page? Sure, I can select the text and make it monospace, then manually fix the spacing, etc... but is there a magic button to press or magic html tags to put in so that