Progress bar for airport extreme while backing up

I installed Airport Extreme with an External Hard Drive yesterday.
During the INITIAL Backup, there was a Progress Bar.
But now during the Hourly Backups, there is no Progress Bar.
Is there a way to get the Progress Bar back, during the Hourly Backups?
Thanks,
Wally

Incremental backups should only take a few minutes unless you have added a lot of new data.
If you want to watch the boring backup progress, click on the Time Machine "clock" icon at the top of the screen, then click Open Time Machine Preferences.
If you don't want to open Time Machine Preferences, you will two arrows on the Time Machine "clock" icon whenever a backup is occurring.

Similar Messages

I am on dial up. Can I get the progress bar for loading a page back it helps me know how things are going.

On previous versions of Firefox there was a progress bar when you were loading a page. It was in the lower right corner. How can I get it back? It would be very helpful if there was an add on for it for those of us still on dial up.

Be aware that the loading indication that you see doesn't represent a real indication of what is happening. It just starts increasing till about 50% of the bar is filled and if it takes too long then the steps get smaller (half what is left as available space in the end or stop at all).
There is also the Net tab on the Web Console that can show how long it takes to load content.
*Firefox > Web Developer > Web Console

Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX?

Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX? The installation CD simply says that the software can't be installed while running this OSX.

Mountain Lion already has the most recent, updated version of AirPort Utility installed on your Mac. The version on your CD is out of date, so you can trash the CD.
Look in Macintosh HD > Applications > Utilities > AirPort Utility.

Progress bar for animation

I am trying to make a progress bar for my animation, similar
to the stock flv players that came with CS3.
I am controlling a swf file loaded into the 'container'
movieclip, and I can get the scroll bar to control the movieclip.
In other words, the animation will jump to the right frames when I
drag the bar. However, when I put in code to make the progress bar
follow the action (using a onEnterFrame event handler) It follows
the animation, but now I can't scroll.
Question: How do I make my scroll bar stop following the
action when you click on it to scroll somewhere else???
Thanks in advance for your help!

Ok, so i took another crack at it and fixed the action script issues which for some reason half disappeared when i loaded it back up ( Maybe it didn't properly register the change back to AS 3? I resolved the other ones that popped up in it's stead after staring at the code for a bit ). Next a related issue so i'm gonna post it here, but does anyone know how to get the image rotation loop to play while it loads?

Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port

Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port

Yes, but you might want to note that the port on the AirPort Extreme is only USB 2.0, and that it runs at about half the speed of the USB 2.0 port on a computer, so things are going to be quite SLOW as far as backups are concerned, or anything else for that matter.

Are there updates available for Airport Extreme? If there are, will I be notified of an available update?

Are there updates available for Airport Extreme? If so, will I be notified or should I check from time to time for any updates?

Back up your data, check your applications for compatibility, and download Mavericks from the Mac App Store.
(108187)

Progress bar for movieclip animations

Hello,
I have to create a presentation with audio and animation synced - it's about 5 minutes. It has 5 buttons at the bottom that the user can use to navigate to a particular subject of the presentation. But I was asked if there could be a progress bar for each subject so that the user could see how far they've gone. I'm thinking I could have something check to see how far along the audio is and have a bar move along as the audio moves along.
This seems like a project that's probably been done, if anyone could help that'd be great, thanks!

I don't deal with sound much, but you should be able to monitor the position property against the duration property much like CL mentioned using the frames. You would use the ratio of position/duration to determine how far along the playtime is (percent complete), and you can use that value to control the width of a progress bar.
A progress bar can be as simple as a rectangular strip whose normal width would be the 100% complete size. You control the width by using the percentage complete times that full width value. To make it more visually representative of when the end is coming, when you draw that rectangle, include a line border. But isolate the fill as as the progress bar movieclip. That way, the border lets you know what the full size is while the fill as a movieclip changes to fill up the outline. You can also include a textfield if you like to display the percent completion.

Can i plug printer into airport extreme while it is on

Can I plug a usb printer into airport extreme while it is on?

I cannot find airport in finder, don't know how to turn it off.
You will have to pull the power plug from the back of the AirPort Extreme to power it down. Wait a few seconds, then plug the cord back in.
Or, you can pulll the plug where the power supply plugs into the wall socket if that is easier.

After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it.

The page load progress bar that was on the lower right of the window is no longer there. After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it. The tab has a circular progress wheel but this is useless for determining a stuck or slow loading page.
PLEASE NOTE: I am typing this in from a Windows based work computer but am asking about my Apple MacBook Pro that i use at home.

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

How to use progress bar for Main and Subsequences in teststand

HI,
I have one main sequence in that I am calling different subsequences (Containing many steps and for loop).
I am trying to use progress bar for this sequence, but my requirement is progressbar is able to show the progress of all the steps containing in Main and subsequences.
I have developed sequence in that I am able to show the progress for only Main sequence steps not for subsequences steps.
Is it possible? If yes please let me know the suggestions.
Thank You

Hi Santosh
Here you are
Greetings
Juergen
never Double Click on Submit
Message Edited by j_dodek on 08-05-2008 08:05 AM
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
Progress_ts351.seq ‏52 KB

Progress Bar for Web -- cr version 13.0.7.1136

Hello All..
The report is taking few seconds to display output.,So, i want to show progress bar while loading!!
I've found couple of threads answering this question here but those seems to be old and i could not understand where those are being pointed.The below thread result redirects to welcome page where i could not find anything!!
how to show progress bar while loading report ?
please suggest!!

I did Don... found this !! but could not see any downloadable sdk guide there!!
SAML Response from SAP ID Service
anyways., I've downloaded sap crystal reports .NET sdk developer guide.. there i saw 'Report Processing Indicator'.followed that and added 'ProcessingInidcatorText' and 'ProcessingIndicatorDelay' to web.config. but report is not showing with progress bar.
My Need: User selects some selection criteria(like username or role) from dropdown and clicks 'Show Report' button. Then it is taking nearly 15 to 20 seconds of time to display filtered data. there i need to show user that 'please wait.., data is being processed'. i could see crystal default progress bar saying 'please wait while the document is being processed' when i refresh the report or navigating from page to page but not on button click after selection criteria.
any help would be appreciable!!

I signed up for cc a while back and thought i was supposed to receive both ps and lr but i have only been able to use ps. I pay the monthly 9.99 subscription. Does this price level not include Lr?

i signed up for cc a while back and thought i was supposed to receive both ps and lr but i have only been able to use ps. I pay the monthly 9.99 subscription. Does this price level not include Lr?

Sounds a bit odd to me. Like Gene says, if you are signed in to the Desktop Application Manager, it should recognize you and the plan you are on, and let you install LR without asking for a serial number. Try signing out of the Desktop Application Manager by clicking on the cog icon > Preferences > Account tab > sign out. Then sign back in again. This forces the Desktop Application Manager to scan your system (it normally only does so once every 24 hours looking for updates).
If LR is still not inviting you to Install it, then sign in to your Adobe account . See what it says under My Subscriptions. I don't have the Photography plan, so don't know what you should see, but I imagine it will be obvious. Click on Manage and see if that makes sense.
If still in trouble, I think you would do better starting a thread in the Creative Cloud forum that deals specifically with this sort of issue. You'll also find some FAQ links on that page that will likely give you a clue as to what is going on.
Bottom line is I have never been asked for a serial number installing LR from the CC Desktop Application Manager.

Problem with a progress bar for downloading attachment

I display the progress bar for downloading attachments and it works fine … but when I am downloading some attachments I get the exception message:
Exception in thread "main" com.sun.mail.util.DecodingException: BASE64Decoder: Error in encoded stream: needed 4 valid base64 characters but only got 1 before EOF, the 10 most recent characters were: "Q3w5ilxj2P"
I found the explanation:
Certain IMAP servers do not implement the IMAP Partial FETCH
functionality properly. This problem typically manifests as corrupt
email attachments when downloading large messages from the IMAP
server. To workaround this server bug, set the
"mail.imap.partialfetch"
property to false. You'll have to set this property in the Properties
object that you provide to your Session.
http://java.sun.com/products/javamail/NOTES113.txt
So I turned off partial fetch:
Properties props = System.getProperties();
props.setProperty("mail.store.protocol", "imaps");
props.setProperty("mail.imaps.partialfetch", "false");
Session session = Session.getDefaultInstance(props, null);
Store store = session.getStore("imaps");
store.connect("imap.gmail.com", "<username>","<password>");this solved the problem ….however the method getInputStream() from the Part class blocks the thread until the attachment is completely downloaded and it is impossible to get the information about the number of bytes which have been already downloaded from mailbox.
Without this information it is impossible to display the progress bar. So is there a way to obtain this information and display the progress bar?
Edited by: 911161 on 2012-01-31 10:55

Try the answer I provided to your post on stackoverflow.com:
http://stackoverflow.com/questions/9086700/how-to-displaly-progress-bar-for-downloading-attachment

Progress bar for FLV

Hi -
I have a site with some pretty hefty FLV's and I want to show
the user that they are loading...the progress bar thing.
So I used the code right out of the livedocs for "Creating a
progress bar for loading FLV files with Actionscript". I used it
with their sample FLV and with my FLV and got the same result. I
saw a progress bar and percent text, I heard the audio, but no
video. Can anyone help me either fix the livedoc code or use some
other to get this to work??
Thanks,
Josh

“…but no video.”
Ok. From the beginning;
1. CTRL+L to open up the library panel.
2. On the very top right corner there is an icon. Click on
it.
3. A menu will appear and then select “New
Video”.
4. Drag this instance from the library onto the stage.
5. Give it an instance name of “my_video”
6. Put the code from the livedocs into frame one.
That should work. If you can actually compile the code with
nothing on stage and you can hear the audio from that FLV. So that
means you don’t have a Video instance on stage or incorrect
instance name. Good luck.

Progress Bar for file upload

Dear sirs...
i have an ADF UIX page that uploads an ORDVideo file. is it possible to display the progress in the upload operation using a progress bar for example???
thanks for any help

Did you get to know how to do it?
Anuj

Progress bar for airport extreme while backing up

Similar Messages

Maybe you are looking for