Progress status setting in PPM

Hi Experts,
Can the default settings of number of days in Progress Status be set globally?
Path to Progress Status Settings:
PPM --> Target to Date --> More --> Options
Current default settings = 7, 50, 90 days
Desired default settings = 30, 60, 90
Please advise on this.
Thanks & Regards,
Gautam

very simple..we can set it through web ui directly. It is set globally for all the users regardless of organisation.

Similar Messages

Status of a PPM

Hi,
         These are few questions about PPMs:
1. If I have 5 PPDS PPMs for a product and location, can they all be status "blank" ?
2. I am assuming 1 to be active and blank to be inactive. am I right?
3. Can you have all 5 with status blank?
4. Are these still considered in planning?
5. How is this status set in PPM? is it during CIF or manually set?
What is the corresponding parameter in R/3 for the status?
Is this the BOM status?
6. I also see status 0- what is this?
Thanks.

Dear Visu,
Folowing is my Understanding:
1. If I have 5 PPDS PPMs for a product and location, can they all be status "blank" ?
   I am not sure about status "Blank" Either it should be 1 or 0.
2. I am assuming 1 to be active and blank to be inactive. am I right?
    1= Active, 0 = Inactive
3. Can you have all 5 with status blank?
    You can have five inactive PPMs.
4. Are these still considered in planning?
    Nope......
5. How is this status set in PPM? is it during CIF or manually set?
    Through CIF status will be set automatically if your PV is correct.
6. What is the corresponding parameter in R/3 for the status?
    In R/3 If BOM & recipies are correct & consistent then after your PV creation you can do consistency check for PV & after saving itt system will activate the PV.
8. I also see status 0- what is this?
    0 is Inactive status.
Hope it will help You.
Regards,
Hardik

Pause slide vs. TOC progress status

Hi again,
this project gives me hell! I almost finished but there is some ****... trouble again :-/
Whole project is just demo of set-up and some basics for MS Outlook.
For navigation im using only TOC. Progressbar below is included in SWF animation on each slide. (its not project progressbar).
Problem is that project continues to next slide afrer video(animation) ends. But i need it to stop after viewing whole video.
So i placed some transparent click box in slides with "no action" option and that solved my problem with project continuity,
unfortunately progress status in TOC isn´t working now because of that click box.
I would be grateful for some advice.
Thanks
Martin

Hello,
How is the Success Action for your Click box? Is it set to Continue so that the whole timeline of each slide is played?
Another possibility is acquiring the TickTOC widget of InfoSemantics.
Lilybiri

Updates in progress - status non-compliant

I deployed my latest software updates (Patch Tuesday) a few days ago to my XP client collection (yes - I know it's going away soon :)) and I see that looking at the Deployment Status they are reading as
In progress but status set to non-compliant.
Strangely I had pushed the same deployment to my test collection a week previously and they had installed normally.
I had a look at various logs and everything seems to have no discernible errors but looking at a sample of the computers in question shows that the updates have NOT installed.
Opening the 'more details' pane for each computer shows that the software updates are set to a status of
required.
Confused as to where to look now to troubleshoot.
My software update deployment to my Windows 7 collection is successful. No errors in the deployment status window.
Any help or pointers are appreciated.
Thanks,
John

Hi,
If these update logs have no discernible errors, you could enable verbose logging to help you find more information.
Please check the logs in the following KB to find why were these updates not installed.
(http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_SU_NAPLog)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

In Process Order status "SETT" Settled

Hi
After settlement of Process Order, system status (SETT - Settled) of Process Order is not updating atomically.
After settlement of Process Order, Process Order allow only in Display mode & there is no posting allow against settled Process Order.
Please suggest me what are the setting required.
Regards
ARK

ARK,
In your order type dependent parameters in transaction COR4, for you plant order type combination for Process documentation "Order record" radio button is active, that's why system is not allowing you to set deletion flag.
Are you working on a client system or a training system where you are just trying to test different scenarios?
If you are working in training system then in COR4 transaction for the plant order type combination you can activate the radio button for "No process documentation required". Now if you check the order it would allow you to set deletion flag.
If you are working on a project and client system, you need to ask the user to execute transaction COPA to store the order records, once this is done you would be able to set the deletion flag. (Please note: Before you execute transaction COPA necessary basis setting for storing has to be in place.)
Regards,
Prasobh

LCM import of Planning Application Hangs with "In Progress Status"

Hi,
LCM import of Planning Application Hangs with "In Progress Status" . its already couple of hours. Earlier it was always within 10 mins.
Any advise is appreciated.
Regards,
Vineet

It is probably worth trying again, may be useful to first bounce the services.
If it happens again after bouncing the services then investigate at what staging it is getting stuck at.
Cheers
John
http://john-goodwin.blogspot.com/

JApplet / application init / start progress status feedback

We used to put up a separate JFrame during the initization/startup of our applets/applications for status messages. While o.k. for Java Webstart / application modes (& maybe standalone applet mode), this was not pretty for customers embedding our apps in portals.
So, the goal became to show custom progress/status on the "gray screen" initial applet contentpane until our app desktop is ready to show. Known threading / painting issues during applet startup made this task somewhat non-trival.
Searched around here on the jdc & found a nice little Moving Ball class & used that as a base for the play app below. Thought I'd post this back to jdc in case anyone else finds it useful. The JApplet code has a main, so same code should work for the app whether deployed as a (plug-in) applet, application JAR or Web Start app.
The code should show a RED moving ball during init, a YELLOW one during start and a GREEN one after start method is done (w/ball x position update in scrolling pane)....
import javax.swing.*;
import java.awt.*;
import java.awt.event.WindowListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
    cforster: Uses Ball painting code (from jdc) & separate status area to simulate JApplet
    startup msgs to be shown to user during applet init...
    Point is to show status during applet/application initialization (init / start) methods...
    Can JAR this up & try in appletviewer or using 1.4.2+ plugin, etc.
    With main() also usable in application / Webstart mode....
    If going the application route (or double-click JAR route), need JAR manifest.mf like:
    Manifest-Version: 1.0
    Main-Class: Today
    Created-By: 1.4.2 (Sun Microsystems Inc.)
public class Today extends JApplet {
    private static Today inst;
    // Ball color will change from RED (init) -> YELLOW (start) -> RED (start done)
    Color ballColor = Color.RED;
    final int colorSleep = 3000;    // Time to waste in init & start methods
    final int pauseSleep = 25;      // Time between Ball moves/draws
    JTextArea jta = new JTextArea("=== Status ===" + "\n", 50, 132);
    MovingBall movingBall = new MovingBall(jta);
    public static Today getInstance() {
        if (inst == null) inst = new Today();
        return inst;
    public Today() {
        super();
    public void init() {
        setVisible(true);
        getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
        movingBall.setPreferredSize(new Dimension(400, 100));
        movingBall.setBackground(Color.lightGray);
        getContentPane().add(movingBall);
        jta.setEditable(false);
        jta.setBackground(Color.lightGray);
        getContentPane().add(new JScrollPane(jta));
        movingBall.start();
        validate();
        try {
            Thread.sleep(colorSleep);
        catch (InterruptedException ie) {      }
    public void start() {
        ballColor = Color.YELLOW;
        validate();
        try {
            Thread.sleep(colorSleep);
        catch (InterruptedException ie) {       }
        ballColor = Color.GREEN;
    public void stop() {
        movingBall.stop();
    public static void main(String args[]) {
        final Today CallingApplet = Today.getInstance();
        JFrame frame = new JFrame("Moving Ball / Load status");
        frame.getContentPane().setLayout(new BorderLayout());
        frame.getContentPane().add("Center", CallingApplet);
        // Use an adapter to close the window
        WindowListener listener = new WindowAdapter() {
            public void windowClosing(WindowEvent e) {
                System.exit(0);
        frame.addWindowListener(listener);
        frame.setBackground(Color.lightGray);
        frame.pack();
        frame.setSize(400, 400);
        frame.show();
        CallingApplet.init();
        CallingApplet.start();
    class MovingBall extends JPanel implements Runnable {
        final int xPos_Start = 8;
        int xPos = xPos_Start, yPos = 100, rad = 10;
        boolean moveForward = true;
        Thread thread;
        Graphics dbg;
        Image dblImage;
        JTextArea jta = null;
        MovingBall ball = this;
        // Takes in JTestArea that is supposed to be the status msg area...
        // In practice, the staus area & updates are elsewhere...
        public MovingBall(JTextArea jta) {
            this.jta = jta;
        public void start() {
            Thread ballThread = new Thread(this);
            ballThread.start();
        public void run() {
            Thread.currentThread().setPriority(Thread.MIN_PRIORITY);
            yPos = getHeight() / 2 + (rad / 2) + rad;
            while (true) {
                if (moveForward)
                    xPos++;
                else
                    xPos--;
                if (xPos > getWidth() - (2 * rad))
                    moveForward = false;
                else if (xPos < xPos_Start + (2 * rad)) moveForward = true;
                SwingUtilities.invokeLater(new Runnable() {
                    public void run() {
                        if (xPos % 20 == 0) {
                            jta.append("xPos = " + xPos + "\n");
                            jta.setCaretPosition(jta.getText().length());
                        ball.paintImmediately(ball.getBounds());
                try {
                    Thread.sleep(pauseSleep);
                catch (InterruptedException ie) {
                    break;
        public synchronized void stop() {
            thread = null;
/* Not needed for Swing Component (only AWT ?)
          public void update(Graphics g)
               if(dblImage == null)
                    dblImage = createImage(this.getSize().width, this.getSize().height);
                    dbg = dblImage.getGraphics();
               dbg.setColor(getBackground());
               dbg.fillRect(0, 0, this.getSize().width, this.getSize().height);
               dbg.setColor(getForeground());
               paintComponent(dbg);
               g.drawImage(dblImage, 0, 0, this);
        public void paintComponent(Graphics g) {
            g.setColor(getBackground());
            g.fillRect(0, 0, getWidth(), getHeight());
            g.setColor(ballColor);
            g.fillOval(xPos - rad, yPos - rad, 2 * rad, 2 * rad);
}If anyone plays with this & finds issues/problems or makes improvements to its mechanism, would be nice to post back to this thread.

hello,
I found that while configuration of AM there was an warning
Command deploy executed successfully with following warning messages: Error occurred during application loading phase. The application will not run properly. Please fix your application and redeploy.
WARNING: com.sun.enterprise.deployment.backend.IASDeploymentException: ContainerBase.addChild: start: LifecycleException: java.lang.NoClassDefFoundError
Successfully deployed /amserverthis might help in resolving the issue.
regards,
sumant

No entered status set. No results analysis will be performed

Hi Guys,
I keep on getting this error message beloe and the valuation is on RELEASE status
No entered status set. No results analysis will be performed
Message no. KJ210
Diagnosis
The valuation of the order or project in results analysis depends on the status of the object.
In this case, the object does not have an active status entered in the valuation methods in Customizing for WIP calculation and results analysis. Consequently, WIP calculation and results analysis cannot find a method with which the object can be processed.
Procedure
Decide whether the object should be processed in its current state (indicated by its active status in status management) by WIP calculation and results analysis.
If you want to process the object:
In Customizing for results analysis, choose Period-End Closing -> Results Analysis -> Define Valuation Methods for Results Analysis, add an entry for this status, and specify how objects with this status should be processed.
If you do not want to process the object:
This message is inconsequential for you. No follow-up actions are necessary.
In Customizing for results analysis, choose Period-End Closing -> Results Analysis -> Define Valuation Methods for Results Analysis and select the No valuation indicator. This message is then no longer issued by the system.
Example:
In the standard system, there is normally no entry in the valuation method for the status CRTD (Created). You will therefore receive this message for objects that only have the status CRTD.

Hi Guys,
I manage to run the RA. The problem why I could'nt get it right was because I did not run transaction MMPV to close period for material master
Thanks for your help.

Hi Im using os 10.7.5 and i can't see the progress status in the launch pad and in purchase tab in mac app store. PLEASSSSSEEEE HELP!

Hi Im using os 10.7.5 and i can't see the progress status in the launch pad and in purchase tab in mac app store. PLEASSSSSEEEE HELP!

HI guys! can anyone help me with this?!?

Order Settled status 'SETT'

Hi,
PP gurus
My requirementis that is in process order information reports(COOISPI), i cannot able to see process orders which has already been settled with actual costs incurred and closed,
such orders should show the system message as SETT in reports.This system status SETT is already available in BS22 and already maintained, but why it is not appearing when i run report at month end to check which of the orders has been closed and settled, Only CLSD status is appearing why not SETT.
My problem is that how to activate the system status SETT so that i can see COOISPI report with settled orders.
is there any provision to activate with respect to process orders or any standard CO report is available to see orders pending for settlement and already settled.
Rgds,
Yogesh

Hi Yogesh,
Hope I am sure,u can check like this.
Usually system staus is checked like this
From the order table AFKO or CAUFV,object number is taken.then from JEST table system status is taken and feed into TJ02T to get the status.
You do one thing,go to TJ02T,Input status as SETT and take the system status number.then input the system status number in JEST table,u will not get any object number difined for this SETT. for all other status which will update in order object number is defined.
Hope it is helpfull

What is system status SETT in COOIS

Hi experts,
In report COOIS we can see system status as SETT but this status is not available in production order status bar (Tcode CO02) either active or inactive.
After settlement of production order status gets updated as SETC.
I want to know status SETT comes into picture?
Thanks,
Bijay

Hi,
SETC: Settlement rule created
SETT: Settled
Regards

How to delete production orders that have release status set in APO ?

I have a few production orders which have a release status set in SCM 5.0 system. I need to delete them now. I cannot delete them from ECC since the ECC system no longer exists.
I need to delete these orders in APO only ? Is there any way to do this ?
Thanks in advance for your help!!
Ranjini.

Please try deleting with either of the reports /SAPAPO/OM_DELETE_INCON_ORDERS or/SAPAPO/DELETE_PP_ORDER

When i approuve a transport request, it stays in progress status

Hello,
even if i input approval steps and i approuve it after, they are still in progress status, they don't desappear from QA worklist.
ho to do to resolve this situation ?
Thank's a lot

Hello,
Is this a workflow question? Are you using workflows for transports?
If yes, check the workflow log, eg via SWIA, to see what the problem is.
If no, maybe you could ask in a different SDN forum.
regards
Rick Bakker
Hanabi Technology

Resubmission status set as completed

Hi,
We face an issue with the FSCM module We see that a lot of resubmission status set as completed. The change log showing user name and date and time but user informed as the completion was done by my account (user id) but not by me.
There was no job schedule for this activity. Normally will the status manually.
Is any possibility to set status as completed by automatic run due to change of collection profile, strategies etc reasons? If so how to find whether it is auto run. Or any other possible to change status.
You input in this regards will be highly appreciated with high points
With regards,
V.krishnamoorthy.

You can use transaction MASS and set object type as BUS2012. Than select "Purchase Order Item" and run (F8).

Instance status set to Faulted when catching an Exception in a BPEL flow

Hi,
I have a question regarding BPEL & catch (SOA 11.1.1.4.0). When the composite catch an exception (using catch-all block), the status of the composite is set to Faulted immediately even when the flow continue to run. In this specific case in the flow, the problem is handled in the catch flow and I want to continue with the flow.
So when I'm looking at the Enterprise Manager console, I see many Faulted instances and I don't really know the "correct" status.
Is there a way to actually use the catch-all block but still have the status set to Completed ? If not, are there any consequences. For example, is the recovery of instances continue to work ?
Thanks,
Ronen

Hello,
1403 is out of range for the return value, see https://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1342602684748
We can raise errors in a given range but the shell will only keep an
unsigned byte in the status return value (values 0..255). It takes our exit file and
just looks at that last byte.
It also shows how to get around this limitation.
Regards
Marcus

Progress status setting in PPM

Similar Messages

Maybe you are looking for