Progrrame going go for short dump

HI FRIENDS
WHENEVER OUR PRG TRIES TO RETRIEVE MORE THAN 20000 RECORDS ITS GIVING DUMP WITH
Storage_parameters_wrong_set
abap/heap_area_dia/ndia value 2gb.
APPRECIATE YOUR RESPONSE.
Regards,
Mir.

Hi
This happens when SAP System attempts to allocate memory areas from the memory area 'HEAP'. However, this memory is exhausted. To avoid this , you can try to run this programe in background or reduce your selection or modify related profile parameters ( this depends on your kernel,OS , memory you have etc). You can also check OSS notyes 103747 and 51959
Thanks
Prince Jose

Similar Messages

Programme going for short dump

HI FRIENDS
WHENEVER OUR PRG TRIES TO RETRIEVE MORE THAN 20000 RECORDS ITS GIVING DUMP WITH
Storage_parameters_wrong_set
abap/heap_area_dia/ndia value 2gb.
APPRECIATE YOUR RESPONSE.
Regards,
Mir.

Hi Tim,
The short dump info is :
Runtime Errors         STORAGE_PARAMETERS_WRONG_SET
Date and Time          23.05.2006 17:11:25
ShrtText
&INCLUDE INCL_INSTALLATION_ERROR
What happened?
The current program had to be terminated because of an
error when installing the R/3 System.
The program had already requested 456137504 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia
to a maximum of 456137504. Then reduce the value by 10.000.000 to be on the
safe side.
Then restart the SAP System.
abap/heap_area_nondia and abap/heap_area_dia:
Set smaller than the memory achieved for each process
with 'malloc' and smaller than abap/heap_area_total
You should also check whether the available memory (file system
swap and main memory) is sufficient for the started program
and its data.
Error analysis
When the program was running, it was established that more
memory was needed than the operating system is able to provide savely.
To avoid a system crash, you must prevent this
situation.
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server hstnd1_DV1_00 on host hstnd1 (wp 2)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1878
How to correct the error
Report the error to the group responsible for installing your
R/3 System.
System environment
SAP Release.............. "640"
|
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 2
Short dump setting....... "full"
                                                |
Database type............ "MSSQL"
Database name............ "DV1"
Database owner........... "dv1"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 700176
EM....................... 385999584
Heap..................... 456137504
Page..................... 57344
MM Used.................. 729325096
MM Free.................. 108201024
Appreciate your help..
Regards,
Mir.

TCODE for SHORT DUMPS.

I am trying to load the trandsaction data from DSO to INFOCUBE.
I am getting the following error message: "Error while updating to target Z_INFCUBE".
Because of no proper error message I am not able to resolve the issue.
Please suggest any solution for this and tell me if there is ant tcode for checking the short dump of error messages.

Hi Vivek,
Check the error AT below places:-
1) SM37 by your id- cancelled job..
2) short dumps can be analysed at ST22.
3) doble clicking the error messgae you will get help -node in monitor screen.
Hope it helps....
Regards,
HIrdesh

Changing message text for short dumps

Hi, we have users running open transactions and finally core dumps with message:
TSV_TNEW_PAGE_ALLOC_FAILED
Short text
    No more storage space available for extending an internal table.
What happened?
    You attempted to extend an internal table, but the required space was
    not available.
Is there a way to customize the message a bit to give more helpful information?
Thanks,
Jonathan.

Jonathan,
I am not an expert in BASIS, so I cannot say if it is possible to change the texts for these messages. I am a bit surprised that you think " No more storage space available for extending an internal table" is not adequate. In addition, I am a more than a bit surprised that you are implicitly expecting to get dumps, so much so that you want to make the messages more user-friendly.
Runtime errors are not a tool to remind users that they have performed an impermissable activity. When a dump occurs, you pray that SAP will properly roll back all data to a consistant, pre-error state. I assure you, that this will not always happen in a complex environment. A runtime error is normally considered a very serious event. In most companies, it is the goal to never have a runtime error, and someone is usually charged with running these down and eliminating them. And that 'someone' is not a user.
Anyhow, you might want to try one of the many ABAP forums, one of the experts there may be able to assist you in changing these texts.
Sorry I couldn't be of more assistance,
DB49

Short Dump for Query in Quality server

Hi Experts,
i have a query, when i execute it in developement server, it successfully execute. But when i execute the same query in Quality,
it gets short dump, giving following error.
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
previously it was working fine in quality, but suddenly it gets shortdu while executing.
i transported again, but error still persists.
i tried execute this query in RSRT also, where it stops at a break point.
this query uses a custimer exit variable, but this variable is not the reason for short dump. without this variable also same error occurs.
please help me to resolve this.
Thanks
Saurabh

Hi,
Please try to provide max input in the variable screen, Don't execute the query based on single selection criteria. And also please perform cube compression before executing the query.
Hope this will solve the issue .
Thanks
PT

Short Dump....itab

Hai All,
I have done an ALV Report Program, which while executing goes to the short dump and the error msg says:
" You attempted to change, delete or create a line in the internal table "???", but no valid cursor exists for the table.
Possible reasons:
1.The relevant Abap/4 statement does not include the addition "..INDEX.." although the statement is not inside a "LOOP..Endloop" loop processing this table.
2.The relevant Abap/4 statement was called from within a "Loop..Endloop" loop after a Delete"???". "
Could anyone sort this out please.
Thanks in Advance.
rama

Yes, I am trying to modify my internal table: Here is my code:
How can i use the index here:
select * into corresponding fields of table itab from bsis
                                      where bukrs in x_bukrs
                                        and hkont in x_hkont
                                        and budat in x_budat
                                        and bldat in x_bldat
                                        and zuonr in x_zuonr.
*data
move-corresponding itab to jtab.
loop at itab.   " into wa_itab.
if itab-shkzg = 'H'.
*move-corresponding itab to jtab.
x_dmbtr = itab-dmbtr * ( -1 ).
move x_dmbtr to jtab-dmbtr.
x_vbeln = itab-zuonr+0(9).
move x_vbeln to jtab-vbeln.
*append wa_jtab to jtab.
modify jtab transporting dmbtr vbeln.
*collect jtab.
else.
*move-corresponding itab to jtab.
x_dmbtr = itab-dmbtr.
x_vbeln = itab-zuonr+0(9).
move x_vbeln to jtab-vbeln.
*append wa_jtab to jtab.
modify jtab transporting dmbtr vbeln.
*collect jtab.
endif.
collect jtab.
endloop.

Short dump while accessing the table

There is a report ppioa0000, when executing the report it is going for short dump, error analysis showing that
<b>when accessing the attributes of dictionary table IOSOPER meaningless values are found.</b>
and ABAP run time error showing that DDIC_FIELD_ACCESS_ERROR
suggest me,
thanks and regards
krishna

The database is damaged, links between SAP dictionary and actual database seems to be broken. Try to use SE14 to adjust database.
Regards

Short dump while accessing the IOSOPER

There is a report ppioa0000, when executing the report it is going for short dump, error analysis showing that
<b>when accessing the attributes of dictionary Table IOSOPER meaningless values are found.</b>
but IOSOPER is a Structure
and ABAP run time error showing that DDIC_FIELD_ACCESS_ERROR
suggest me,
thanks and regards
krishna

closing unable to find answer

Short dump while executing report group.

Hi,
We are upgrading to ECC6.0 from 4.6C
Now while testing the report group i got short dump.
This is due to to the 'Exception condition "LOAD_PROBLEMS" raised.'
Error analysis
    A RAISE statement in the program "SAPLSLDB" raised the exception
    condition "LOAD_PROBLEMS".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
Function module 'SELOPTS_AND_PARAMS' in this that statement was there.
Can some one help me out. what i have to do further.
Thanks in advance.
Regards,
Deepak.

Hi Hemanth,
Actually what I analysed is what ever the exception raised due to this sy-subrc that exception i think the superior program is not receiving. I think due to this it is going for short dump.
Let me know if you have any idea further.
Thanks,
Deepak.
Message was edited by:
        Deepak Kudaravalli

Short dump while PO creation with Tax Code

we are facing problem while creation PO, while providing the Tax code(Example V0), its going for short dump, check the below
the program SAPLV61Z and
The exception must either be prevented, caught within the procedure
"SEL_KONDTAB"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Check the field names in the SELECT clause.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_INVALID_FIELDNAME" CX_SY_DYNAMIC_OSQL_SEMANTICSC
"SAPLV61Z" or "LV61ZU01"
"SEL_KONDTAB"
The termination occurred in the ABAP program "SAPLV61Z" in "SEL_KONDTAB".
The main program was "RM_MEPO_GUI ".
The termination occurred in line 537 of the source code of the (Include)
program "LV61ZU01"
of the source code of program "LV61ZU01" (when calling the editor 5370).
Processing was terminated because the exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
occurred in the
procedure "SEL_KONDTAB" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "SAPLV61Z ". Its source code starts in line 254
of the (Include) program "LV61ZU01 ".
005360           IF se_read_all_prestep IS INITIAL.
     >             SELECT * FROM (t681-kotab) APPENDING TABLE <cond_tab>
005380                    UP TO 1 ROWS
005390                    WHERE kappl = se_kappl
005400                    AND   kschl = se_kschl
005410                    AND   datbi >= se_date
005420                    AND   datab <= se_date
005430                    AND   (coding_tab).
005440             h_subrc = sy-subrc.
In the above statement execution its going for dump, when the (t681-kotab) value is A980 when i checked at debugging
Kindly help me out to solve the issue
Thanks in advance
Regards
Kesav

Hi,
Do you have an integer field in the condition table A980? It looks like a field in the table is integer one and the system during creation of custom dynamic select statement adds as many spaces as possible before the integer value (integer values are right justified), so the statement exceeds the maximum length with an 'AND' or another condition clause.
Please check and provide more details if the issue is not resolved.
Regards,
Marcin

Short dump due termination in the program SAPLSNR3

Hi Experts,
While running an IP I am getting short dump, and error analysis says
An ASSIGN statement in the program "SAPLSNR3" contained a field symbol with
length 0. This is not possible. length 0.This is not possible.
can any one exlain why the IP is going for short dump,rectify the error and make the IP to run sucessful.
Regards,
Siddhardh

Hi Suresh,
Your dump is occuring due to database limit of sql statment (Native SQL) that is generated from your abap sql. The range is killing him (as you already notice).
The thread bellow have some info about this, but the solution can't be applyed to you:
To update 1 field of ztable(60 fields) for 2000 records in minimum DB hit
Maybe you can build some logic to reduce the value of two ranges (also concatenating them). Anyway, due to amount of lines involved (24.500 lines).... I don't think it is possible.
One option is filter the result on ABAP, after your SQL w/o the ranges you may try:
DELETE FROM TABLE i_glpct2
WHERE NOT ( racct IN r_profloss OR racct IN r_balsheet ).
This can raise a performance problem if the number of returned rows from database is to high.
Another option is change your database access. Where the values of the two ranges came from ? database ? If they came from database try to use INNER JOIN, this will solve the problem w/o performance problem.
Best Regards, Fernando Da Ró

Infopackage in process chain failing due to short dump on regular basis.

HI Experts,
There is a daily process chain in which one of the element (infopackage) fails due to short dump on regular basis (At least twice in a week) please find the message below
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
And in job log it is showing ARFCSTATE = SYSFAIL
We are able to resolve it just manual update and the process goes fine no issues but my question here is what is the exact reason for this and how to resolve it permanently or decrease the frequency of the error.
Please if any one can tell the root cause and the solution to avoid the issue in future on regular basis.
and also can any one elaborate what is ARFCSTATE = SYSFAIL,for trfc check we don't have access to SM58 in ECC side
and trfc is fine in bw side
Appreciate for not giving the general solutions like repeated solutions already posted in SDN
with regards,
musai

You can contact your BASIS person he can help you reg table space issue. it says used space is 98% and free space is 1.03%.
ask your basis to set a threshold to check the space and send a mail notification to all daily regarding the space allocation and utilization.
ARFCSTATE = SYSFAIL means the TRFC did not processed properly to the BW system from source.
Monitoring object with information about tRFC and qRFC calls that are waiting to be executed in this system; after they have been executed, they are deleted from table ARFCRSTATE.
Are there any hung TRFCs which are not processed to BW side. have you checked it
first check
load monitor -- menu -- environment -- job overview -- status of job(is it finsihed or not?) - check the job log -- ther try to find out the hung TRFc
press find --tyep "sysfail" ok -- it will display all the hung or fialed TRFCs which are not processed to BW system.
if you find the hung TID with respect to your load.. next goto SM58 trasaction to process the trfcs manually or use the load monitor menu -- environment -- transaction RFC -- source sys -- it will take you to same SM58 screen -- click F8 it will display the hung TRFc in that duration.
select the TRFc and click on F6 to process them manually.
also check the loackwaits anddead locks in ST04/DB6COCKPIT.( ask basis to check) if any dead locks are there they will take care of it.
check for short dumps in st22 if any and try to analyse.
Check the SM21 system logs.

Short Dump:DBIF_RSQL_SQL_ERROR; Exception :CX_SY_OPEN_SQL_DB

Hi All,
I am getting the below short when i try to load the data into BI system. when I start the Info Package, it is immediately going to this short dump.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Except.                CX_SY_OPEN_SQL_DB
Date and Time          15.12.2011 02:43:18
Short text
SQL error in the database when accessing a table.
Please find the short dump details below.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Except.                CX_SY_OPEN_SQL_DB
Date and Time          15.12.2011 02:43:18
Short text
     SQL error in the database when accessing a table.
Missing RAISING Clause in Interface
     Program                                 SAPLBTCH
     Include                                 LBTCHFXX
     Row                                     1.525
     Module type                             (FORM)
     Module Name                             STORE_NEW_STEPLIST_IN_DB
Trigger Location of Exception
     Program                                 SAPLBTCH
     Include                                 LBTCHFXX
     Row                                     1.652
     Module type                             (FORM)
     Module Name                             STORE_NEW_STEPLIST_IN_DB
Source Code Extract
Line SourceCde
1622              ID 'DATA' FIELD jobinfo_egj.
1623
1624           rc = 1.
    EXIT.
ELSE.
    db_steplist-priparkey = tmp_key.
ENDIF.
ENDIF.
SEIF new_steplist-typ = btc_xcmd." Step executes external command
db_steplist-extcmd = new_steplist-program.
db_steplist-xpgparams = new_steplist-parameter.
db_steplist-xpgflag = 'X'.
SE. " Step führt ein externes Programm aus
db_steplist-xpgprog   = new_steplist-program.
db_steplist-xpgparams = new_steplist-parameter.
db_steplist-xpgflag   = 'X'.
DIF.
steplist-sdldate = newjob_head-sdldate.
steplist-sdltime = newjob_head-sdltime.
steplist-sdluname = newjob_head-sdluname.
PEND db_steplist.
ep_count = step_count + 1.
OOP.
liste in DB speichern
RT tbtcp FROM TABLE db_steplist ACCEPTING DUPLICATE KEYS."n952782
y-subrc NE 0.
dialog EQ btc_yes.
MESSAGE s120 WITH new_job_head-jobname.
ENDIF.
CONCATENATE new_job_head-jobname new_job_head-jobcount INTO
jobinfo_egj SEPARATED BY '/'.
CALL 'C_WRITE_SYSLOG_ENTRY' ID 'TYP' FIELD ' '
        ID 'KEY' FIELD tbtcp_insert_db_error
        ID 'DATA' FIELD jobinfo_egj.
rc = 1.
EXIT.
ENDIF.
rc = 0.
DFORM.                               " STORE_NEW_STEPLIST_IN_DB
I would like to know where exactly it is getting error. Please help me on this.
Regards,
Venkat.

Hi,
Check following
See the OSS Notes:
Note 1379839 - RuntimeError DBIF_RSQL_SQL_ERROR Exception CX_SY_OPEN_SQL_DB
Note 917927 - Status of transactional requests
Note 863054 - Correction: Missing packages not in the tree
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
There are many threads also on this.
Go through them
Runtime Errors DBIF_RSQL_SQL_ERROR & Exception: CX_SY_OPEN_SQL_DB
Short Dump in SAP BW Sys while extracting data from R/3
Thanks and regards

Short dumps, tuning

What are techniques used for tuning query performance? Please explain in detail?
What are short dumps how can we check?
What methodologies we follow for the PSA cleansing? Where exactly is the PSA change log where we can delete the request based on timestamp details am using BW 3.1c?
plz help points assured....

Hi,
For query performance please check the following link
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/frameset.htm
Short dumps:
A short dump is an program error because of which the process terminates. It is notified and can be viewed in t-code ST22 on a particular usernaem where you can analyze the reason for short dump.
and refer these links
http://publib.boulder.ibm.com/tividd/td/ITMAN/SC32-9195-00/en_US/HTML/sap_add06.htm
short dump
Short dump while loading data?
Update rules activation gives short dump?
Delete of Master Data creates short dump?
PSA:
check the following link
http://help.sap.com/saphelp_nw70/helpdata/EN/bd/c627c88f9e11d4b2c90050da4c74dc/frameset.htm
Hope it help u.
Assign Points if it helps.
Regards,
RKC
Edited by: RKC on Mar 7, 2008 11:29 AM

HU03 going to short dump for handling unit which has higher level handling

Hi,
I am ABAPer, i working on issue, HU03 is gong to short dump. i dubug the t code and find out that particular handling unit has higher level handling unit. I checked another handling unit which won't had higher level handling unit, that time it's not giving dump.
Note: in HU03 T CODE, function module V51P_HU_CONTENS is fetching values. when ever handling unit has higher level handling unit, it's not fetching further values.
venkey

Hi,
Goto NACE transaction code , there you select the application area then it will give you the list of output types then select specific output click processing routines then you will see the program name and script used.
Or esle goto SPRO tcode then you can find the functional tab there also you can get the details.
Thanks,
Aditya

Progrrame going go for short dump

Similar Messages

Maybe you are looking for