Project 2013 not installing - Boot strapper error
I have Office 2007 on my home PC, along with Lync 2010 - I need to edit Project 2013 files so have opted to download the 60 day trial image file - this has burnt to CD nicely, but when installing I get the Setup Boot Strapper has stopped working message.
Has anyone worked out a way that allows a single product to be installed that doesn't require me to un-install my other office products?
Thanks,
Chris
For the Project installation problem, I recommand that we perform General troubleshooting for installing Office 2013 and Office 365 as the following link:
http://support.microsoft.com/kb/2822317/en-us
Let me know the result, Thanks.
Tony Chen
TechNet Community Support
Similar Messages
-
Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2 -
When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.
Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates -
Itunes helper was not installed correctly. Error 7 (windows error 14001) ?
Upgraded to ITUNES 10 and received following error - Itunes helper was not installed correctly. Error 7 (windows error 14001) - have tried uninstalling all APPLE products, restarting etc and installing ITUNES and QUICKTIME separately yaddah yaddah - NO SUCCESS. Losing patience ?
have tried uninstalling all APPLE products,
Doublechecking. Were you using the instructions from the following documents?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(Doublechecking, because an error 7 off ituneshelper normally indicates trouble with Apple Application Support. If something else is going on, it's pretty exotic.) -
I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help
Have you worked through the tt2 user tip:Troubleshooting issues with iTunes for Windows updates this is the best source on resolving iTunes for Windows issues.
-
Photoshop Camera Raw 7.4 update is not installing because of error code U43M1D207. What needs to be done to resolve this issue?
If you need to post again, please keept the following in mind:
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
How do I correct Install failed "APS DAEMON.EXE error. MSVCR80.dll missing" and "iTunes not installed correctly. Error 7
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(100246) -
Visio and Project 2013 silent install returns immediately (before install is finished)
Hi,
I am building a task sequence that will include Office 2010 ProPlus (volume license), a bunch of other products (like SQL Server and Visual Studio) and also Visio 2013 and Project 2013.
For Visio 2013 and Project 2013, I have to use the retail media (this is for use in academic computer labs and we have a single retail key through DreamSpark Premium that allows unlimited activations - I don't know why DreamSpark doesn't just give a volume
license key).
I managed to get Visio 2013 and Project 2013 to install silently by modifying the config.xml file and using the /config parameter. However, when running my install script (the usual VBScript wrapper) or just from the command line, the command returns before
setup finishes (literally within less than a second). Setup continues to run and finishes successfully, but as you can imagine, MDT considers that application install finished and tries to move on to the next application which fails because another installation
is still in progress.
I've included below the relevant portion of the VBScript wrapper. Any help in figuring out how to get the wrapper to wait for the installer to finish is appreciated.
sSetupFile = oUtility.ScriptDir & "\Source\setup.exe"
sArguments = "/config vispror.ww\config.xml"
oLogging.CreateEntry oUtility.ScriptName & ": Starting installation", LogTypeInfo
// Check for existence of setup file omitted
iRetVal = oUtility.RunWithHeartbeat("""" & sSetupFile & """ " & sArguments)
Coincidentally, iRetVal = 0 indicating success.
Thanks,
SAHi SA,
Obviously you use the VBS wrapper for some reason. To my understanding this behaviour needs to be captured and translated to "script is till busy, when installation completes script is finished, proceed to next step".
I can only advise you to either try the command line directly in MDT, instead of using the VBS wrapper, and/or try to create an MSP and try this in your VBS wrapper, command line directly in MDT.
MSP files are easily created by going into command prompt to the sources folder of Visio / Project and execute the following command: setup.exe /admin this will start the Office Customization Tool which enables you to create an MSP file.
When you are ready, execute the following command to install the application with the settings in the MSP: setup.exe /adminfile custom.msp
Again I can imagine the purpose of the VBS just as I can imagine the purpose of using the config.xml above a custom.msp. But for starters this should get you going to try to find an resolve where the issue lies. In the VBS or somewhere else.
Cheers!
If this post is helpful please click "Mark for answer", thanks! Kind regards -
I've tried 3 times to upgrade my operating system. Each time the upgrade is downloaded, but when it starts to install the upgrades, it stops and says the upgrades were not installed because an error occurred. No mention of what the error was.
My computer is a MacBoor Air running OSX 10.74.Hi ..
If you are trying to upgrade to Mavericks, make sure your Mac meets the requirements > OS X Mavericks: System Requirements
And make sure there's enough free storage space. Mavericks requires about 8GB's.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
If it's not a storage space issue ...
Apps such as Little Snitch, Growl, MacKeeper, and anti virus software can prevent apps from downloading including OS X upgrades
Disable anti virus software if installed
Check the firewall in System Preferences > Security & Privacy > Firewall > Firewall Options
Make sure Gatekeeper is enabled
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected.
If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper -
HT1222 IOS 6 not install and send error massege to me
I download ios6 for my device iPhone 4 and then order to install it but can not install and send error massege during install and also I can not remove it from my device for re download and try again, please tell me what should I do.
What is the error message exactly?
-
MacBook Pro 17" Will Not Install Boot Camp
Has anyone else found that Boot Camp will NOT install on a 17" MacBook Pro? We were able to partition the drive and install Windows but when we tried to install the Mac Drivers we kept getting the error message "this software will not install on your hardware". This is very frustrating as we bought the 17" specifically to run both Mac OSX and PC Windows. Has anyone got any ideas?
You may need to wait until Apple updates the drivers or you could try extracting them from the package then installing them that way
-
Could not install custom actions error
heres the users info
running windows 7 pro 32bit oem
office standard 2013
visio 2013
adobe pro X
CRM 2011
using exchange 2010
we the user click on a message in outlook left or right click the error
Outlook is crashing giving this error: "could not install custom actions is displayed"
which then crashes outlook:
This error shows in event log:
Faulting application name: OUTLOOK.EXE, version: 15.0.4551.1004, time stamp: 0x5253ad6f
Faulting module name: OUTLOOK.EXE, version: 15.0.4551.1004, time stamp: 0x5253ad6f
Exception code: 0xc0000005
Fault offset: 0x004f1d25
Faulting process id: 0x25c
Faulting application start time: 0x01cefcd257c1e5fa
Faulting application path: C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
Faulting module path: C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
Report Id: a3d5969e-68c5-11e3-a4c5-7845c40b5bf7
I have found issues relating to this issue and voting buttons, we do not use them.
now the weird part, when logging into OWA, the message shows as corrupted and displays this error:
Exception
Exception type: Microsoft.Exchange.Data.Storage.CorruptDataException
Exception message: The voting data was corrupt.
Call stack
Microsoft.Exchange.Data.Storage.VotingInfo.Read(BinaryReader reader)
Microsoft.Exchange.Data.Storage.VotingInfo..ctor(MessageItem messageItem)
Microsoft.Exchange.Data.Storage.MessageItem.get_VotingInfo()
Microsoft.Exchange.Clients.Owa.Premium.RenderingUtilities.RenderVotingInfobarMessages(MessageItem message, Infobar infobar, UserContext userContext)
Microsoft.Exchange.Clients.Owa.Premium.ReadMessage.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
when the same user logs into OWA lite version the message displays fine.
I have tried removing/reinstalling outlook/office/crm/ ect
I have setup a whole new pc, still happens
I even installed outlook 2007 to see if it would happen and it did, im at wits ends, and I cannot put crm back on the users pc until I rule out it.
I have tried repairing the exchange mailbox and no corruptions were detected.
any ideas that can point we in the right direction would be appreciated.
thanks for your timeHi,
According to your description and the error message, the issue seems more related to the Exchange user account. Because you had re-build a client environment and check the voting buttons.
I noticed that if you logged into OWA it was corrupted, and it worked well in OWA lite version. A lot of feature were available in OWA lite version. Such as, Reading Pane, Share a calendar, Public Folders, etc. I suppose that the issue also may be caused some
custom forms loading.
Following this, I recommend you create a new user account in Exchange, then try to disable and open the feature one by one to test.
Here is the feature list:
http://blogs.technet.com/b/ilvancri/archive/2010/04/07/exchange-2010-owa-versus-owa-light.aspx
Reading Pane: Click View > Reading Pane, and then Right or Bottom.
http://office.microsoft.com/en-us/outlook-help/turn-the-reading-pane-on-and-off-HA102830304.aspx
Share a calendar: Use command to turn off it in Exchange server.
Regards,
George Zhao
TechNet Community Support -
OK, spent about 25 frustrating hours so far this weekend doing everything recommended on numerous threads here -- uninstalling and reinstalling itunes and all Apple items. Help?
I am using Windows Vista home premium. After the last iTunes update to 12, it suddenly would not work. I followed, to a T, all instructions to uninstall all Apples software, in the correct order, reboot, download the latest iTunes, run as administrator, plug in the iPhone 5S, let the driver install, and then finish.
Along the way, I received the error that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I am the administrator and have privileges. (I previously followed instructions from anther thread to change the read-only privileges for Apple folders, but to no avail. I also deleted every file with the word Apple in it after I uninstalled everything.) I did a retry and then an ignore during installation of the AMD error, which I have received 10 times.
The other error I keep getting is: "iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7." I have done that 20 times.
Other frequent error: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)."
I followed other threads suggestions to install Windows .NET versions 3.5 and 4.0. No help. I also looked for various specific Apple files in various folders for DLLs, etc. Not present. I have rebooted 50 times and tried different users on my home account as well. Nothing.
I also followed instructions to Manage my computer under "services." Under Apple Mobile Device, the setting is for "automatic." When I try to get it to "start," the error I receive is "Windows could not start the Apple Mobile Device on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion." (I followed previous thread instructions to use the CMD prompt to stop it. That caused problems because the status was then "stopped," but I was able to restart it later once I figured that out -- but with the 1053 error again.)
I think I've tried every suggestion in every thread for the four errors I keep getting (AMD failed to start; iTunesHelper Error 7; Windows error 998; and AMD Error 1053.) I am fresh out of ideas and very frustrated. I mostly want to make sure I don't lose my music and photos, which I was about to sync.
The only other thing I see that is strange on my computer (which I discovered along the way) is that I cannot receive automatic windows updates and have not had an update since 2012. My iTunes worked a month ago, so that was obviously not a show-stopper in the past, but perhaps there is a Vista update I need for iTunes 12? I have service pack 2 for Vista. I have followed all threads to try to set my windows to automatic update, but no joy there either. It checks for updates and then fails. I followed instructions and did run an installation to install windows automatic updates, but that doesn't work either. I tried 10 times. It runs and takes a while, but is never able to successfully update windows. It says "checking for updates" for a while. Then it dies. My last update was 6/19/12 (failed) and it says the most recent check was 6/22/12, but I have tried 20 times on 10/31/14 and 11/1/14.
When asked to "Install new Windows Update software" to check for updates, I have done so 10 times. It downloads and installs, but never works.
It's an old Dell desktop computer from 2006, and I'm using an iPhone 5S. I am fresh out of ideas. Anyone really smart here?
Thanks.
TristanUpon latest reboot, I also received this error message: "The application failed to initialize properly (0xc0000005). Click OK to terminate the application."
Then I got the iTunesHelper not installed correctly error again.
Then the "Windows can't check for updates" error message.
Then "Apple Push has stopped working." Then a quick DEP error message that disappeared but said something about Apple Push being closed.
I'm also getting denials of service logged by McAffee. Not sure if I'm getting a virus/attack or not.
Not sure if it's a problem with my old desktop machine, my Windows Vista updates, or iTunes, but I'm very frustrated and out of ideas to try.
Thank you for your help!
Tristan -
ITunesHelper was not installed correctly. Error 7 Help!! My itunes worked yesterday.
My itunes wont open without an error message that says itunes was not installed correctly. Please reinstall itunes Error 7 (Windows error 14001) What has caused this and how do I get my itunes back????
after i researched this issue for several days and i emailed apple support this is what i did and it really worked. somewhere i saw on a post to download revo uninstaller because it gets rid of all aspects of a program. i downloaded the revo uninstaller pro. you get a 30 day free trial. i uninstalled everything apple. there is a place on there where you check what scale of scan to use. the first time i used medium on the first few items and advanced on the rest. the advanced scan really went through each and every file after the so called uninstall and found traces of the programs. i had to check boxes beside files that had traces and removed them all. (I ended up having to do this twice because the first time i did this the error box kept popping up when i reinstalled, so my advice is to choose advanced each and every time. also after the first time, that box popped up during the reinstall of itunes that said i needed permission to install something.) Next thing i did was checked on the recent updates and installs on my computer. windows/ms had installed 3 things in those automatic updates. i uninstalled all 3. i'm convinced that there is a corrupt file in there somewhere. there are several fixes and scans on the left side of revo, and i ran several of them just to check. the final one on the bottom was an evidence remover. since everywhere i have seen says to remove all traces, apparently when you empty the recycle bin it really doesnt get rid of it. so i did the evidence remover. it took all day. almost 9 hours. next, apple support had suggested i go to windows update site and download the latest version of there update software. i was wary, but i did this update. i restarted my computer. next i went back to apple and reinstalled itunes. during the reinstall, the box that said i needed permission didn't pop up. after the install the error box didnt pop up. and when i went to itunes, everything was there. i cant tell you which exact step fixed it, but something did. good luck to you. i emailed the apple support guy back and mentioned the revo uninstalled. i'm pretty sure that advanced scan really did the better delete than just uninstalling.
Lynne -
My iPod Touch will not function with certain updated apps ie MindTools, YP.com, Mint, Ymessenger etc and I get the error message that I need to install updated software to load these apps to my iPod Touch; however, I have double checked and all the software updates have been loaded in obht the iPod touch and my computer. There are no updates availabe; yet the error message on App is a software update is required for App. "was not installed because it requires a newer version of iPod software."
The iPod Touch is using 3.1.3 software and it tells me that is the current and updated software version.You are correct in that your 1G iPod Touch has all the latest software updates. It can only be updated to version 3.1.
However that Apps you are trying to download and install likely require iOS version 4.0 or later, which is not compatible with your iPod Touch. So either you'll need to buy a newer iPod Touch or find other Apps that are suitable replacements if possible.
Sorry.
B-rock
Maybe you are looking for
-
After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version. Can I retrieve that icon and thus that facility?
-
Dear All, I am done miro at that time my mistake i could not tag the TDS for the vendor now only i realised that i have to deduct the TDS to that vendor now the MM period is closed i cannot do the reversal and TDS i have to remittee with in 7th of ne
-
How do you make a JPanel resize automatically with its parent JFrame? Thanks, -Zom.
-
Unknown file format when downloading map loader?!?...
I downloaded nokia maps from the nokia website and then nokia map loader but for some reason a get a message on my n73 saying that the nokia map loader is an unknown file format...can anybody tell me what to do??
-
HT5824 How do retrieve my calendar for my iphone? All the events disappeared on my last sync.
How do retrieve my calendar for my iphone? All the events disappeared on my last sync.