Project Archive?

Premiere 6.5 automatically archived mt last 5 saves of every project, in Documents and Settings/Documents/Adobe 6.5/Project Archives. Does Premiere Pro have a similar project archive folder? I can't find it and I really need to!

Saving a project manually does not induce auto-save.
Auto Save saves as whatever timetable is set in the Preferences,
it also always saves to the project folder in the folder Premiere Pro Auto-Save as XXX-1.prproj, XXX-2.prproj etc
If you save a project (ctrl+S) manually is saves the current project as XXX.prproj which is in the project folder.
I have noticed that Premiere does not always do auto save for some reason.
Best is also to Save a Copy preferably to another disk at the end of the day as Auto Save overwrights after a while.

Similar Messages

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

Where is my project archive?

I am trying to share my Final Cut Pro X project with my co-worker. I am able to select "Duplicate Project", which simply makes a copy of the same project back into my Library.
From watching several tutorials, I know I am supposed to be able to click "Duplicate Project" and a promp is supposed to ask me whether I want to duplicate the entire Library, or just the Project. But I can't get that promp to appear. Right-clicking on the project and choosing "duplicate project" simply makes a copy of the project inside my library. But what if I want to send that project to my co-worker? And what if I want to duplicate the entire Library and share that with my coworker as well?
The tutorial also shows a button on the bottom left of the screen that looks like a back arrow with a film reel inside of it. I believe it's supposed to be the Project Archive, from which I am also supposed to be able to duplicate projects.
But the Project Archive button does not exist in my copy of FCP X, and I can't get it to show up. It's almost like I'm running a different version of the program than the one in the tutorial. What am I missing??? I am running version 10.1.1 of FCP X, which I purchased through the App Store.

Since it's external media, does that mean I have to copy it manually through the Finder, as opposed to duplicating the Library from within FCP?
No, when you copy the library to the other drive it will copy with symlinks to the original location. You then need to consolidate the new library in the new location to copy the media into the new library. This will not move the media; it will copy it from one drive to the other, just the files that are used in the project of course. If you want to get them out on the new library onto a new external location on the other drive, you can consolidate again and this time select to move the files into a new exetrnal location on the new drive, which will replace the files inside the new library with symlinks to the new external location. Make sense? Everything can be done and should be done from inside FCP.

Will project archive out of elements 13 work in premiere pro cc or should I output to file? Thanks

Will project archive out of elements 13 work in premiere pro cc or should I output to file? Thanks

Hi Phillip,
You should be able to open a Premiere Elements Project in Premiere Pro CC (Windows only), however, I tried it and found the results were not very acceptable for use as a backup. Can you try it first?
Thanks,
Kevin

IDVD Project Archive portability

I just had occasion to update a DVD that I had originally created with iDVD 3 in 2003. I had saved the original project and all associated files on an external Firewire hard drive.
I had no problems opening the project in iDVD 4 (I did have to point iDVD to two of the movie files who's path had changed) and modifying a few files. I didn't want to reencode on my 933 mhz G4 Quicksilver that was running iDVD 4 so I saved the project to my external drive as a Project Archive (File>Archive Project) making sure to check the box that said something about including the themes. This can take a while.
I then transfer the hard drive to my new iMac Intel dual-core machine with iDVD 6. The original template I used (Parchment) was not installed on this machine. The Project Archive open just fine in iDVD 6 and everything was there. I created a disk image on the Intel machine (very much faster than my old G4) and everything works fine.
So I guess the bottom line is that an old iDVD version Project Archive will work with newer versions of iDVD which is great. However, be sure to include the themes when you create the archive.
F Shippey

That's another bookmark, Fred!
Thank you.
Sue

Premiere Elements 9 Project Archiver doesn't trim my project

This question was posted in February, with no answer. Although my video is not the same, I have EXACTLY the same problem.
"I have some 8mm video that I've captured as one long DV (16GB). I've run the analyzer on it to split it into scenes based on content and dropped some of those scenes onto my timeline. After completing my editing, I ran the project archiver in trim mode and specified my external drive for the project. Rather than creating new clips with handles, I got the entire 16GB DV file copied over."
What am I doing wrong?
Thanks,
Steve

I am not sure how you are getting trim mode from Project Archiver. As far as i know there are only two options there
1. Archive Project: this considers clips added to timeline only. This is generally smaller in size than full video asset.
2. Copy Project: this archives the full assets of video which also includes clips not used in the timeline
So if i understand correctly, if you want to reduce the size of archival use first option.
thanks,
Tahseen

Project Archive Restore Tab missing

Hi, Since upgrading OWB 9.04 to 9.2.0.2.8 the ability to archive/restore my projects has been enhanced to vaporware.
The help still refers to a tab under project prefs, and the ability to archive restore projects, but alas the feature is gone.
Any Ideas?
Thanks,
Richard.

Hi, yes i can use the mdl export, and I saw the intention was to remove project archive in the next version of OWB, but the help and user docs still say its there.
So it makes you think the install is missing something
Not a big deal really, but having upgraded from an earlier version it makes you wonder if something went wrong with the client install.
Regards,
Richard.

Project archiver error

Every time at want to archive - I get this: project archiver error - some unknown error has occured - pl save your project and try again
I have tried to restart program and PC but nothing helps - also tried just to copy the projerct but get the same message.
It has worked fine earlier

What are the pixel dimensions of the photos that you are using in that Time Lapse Timeline? 2886x2164
Were any resized to 1920 x 1080 prior to import? no resize - I use the zoom effect.
Are the GoPro stills jpegs? yes - but have been lens corrected i Camera Raw and saved again with new names
What is the total duration of the Timeline Time Lapse video? before cut - 19 minutes 28746 files - after cut 1,54 minutes
If you select File Menu/Project Archiver/Copy what are you setting for the Copied Folder that will be generated? a folder on the HD
and
What do you see in the Project Archiver dialog for the following when you select Copy option
Disk space Available 1,1 TB
Orginal Project Size 19.8 gb
New Saved Project Size 19.8 GB
I have just made a succesfull project archiving of an other video made from various movieclips.
But it didn´t change anything regarding the time lap

Premier Elements Project Archive

I just discovered the Project Archive feature and want to start using it but figured the better part of valor would be to come here and see if any of the resident experts can offer advice or point to a good article about "best practices" for using the archive function.
I'm currently running version 8.0
Thanks in advance,
Dan

Dan,
If you are archiving to an external HDD, and are on a PC, I recommend setting the drive letter for that external HDD in the OS of the computer (and also any other computers) where it will likely be plugged in. Do this before you use the Project Archiver function. The reason for this is that all media links are absolute Paths, so any change in those Paths, say folder name/location, or drive letter, will break those links. So long as that drive is always seen by the same drive letter, in the OS, and you do not change the folder structure, the links should be good, so no "Where is file ____ ?" messages, and no re-linking.
I also like to test any archived Project, before I Delete anything.
Also, there have been some issues with Project Archiver (and Project Manager in PrPro) not copying Assets, that are on other drives in a system. I encountered this behavior with my SmartSound files, which were usually stored to and Imported from a separate HDD, than my Projects and other Assets. I corrected that workflow, and now ALL Assets (or the copies of those used in each Project) are in folders within the Project's folder structure and on the same HDD, as the Project. Testing pointed out this little anomaly. Now, in my case, I could have just re-linked to those SmartSound files, but like everything compartmentalized.
Good luck,
Hunt

Project Archive won't playback on iMovie HD

Hi,
I made a backup project on dvd using "Burn a project to disk" ( file size 4GB ). When I tried to open this in iMovie HD, I got the message "The project could not be opened, because the disk is full, the project is locked, or the folder permissions are incorrect." Obviously the disk isn't full ( I tested it again using afile size of 100MB - same message ). I used Disk Utility to "verify disk" - passed. "Verify disk permissions" was greyed out. Any ideas?

Hi Lauren,
You cannot open the project directly from the DVD. You need to copy the archived project from the DVD back onto your hard drive, and open from there.

Configuring content repository for project archiving

Hi Experts,
Self have done the below steps for archiving projects.
1) Created a project, released it and set the status DLFL and DLT for the project through CN80.
2) For archving created the variant and saved it. For start date gave as immediate. For spool parameter selcted on printer and saved it.
3) In customizing Maintained the created variant as test mode variant and production mode variant. Selected the delete jobs as "Start Automatically". In "Place file in storage system' self have given the content repository created in Knowledge management in Define content repository. The content repository which i created was not available in F4 but just gave the name which i created. "Store before deleting check box" was checked and "Delete program reads from storage system" was also checked and then the data's are saved.
4) When i executed the variant, archiving was happening properly but storage was not successful. I was also able to access the project in CJ20N
5) In retreival of CN80 i was able to retreive the archived project as well when i give the archive version number, hence self think archving has happened properly.
My confusion is when i check "From database" check box and give the project in retreival then also the project is getting retreived. Self feel the project must not be available in physical database.
Help me in below points
1) Will the project be read only in CJ20n when the project is archived?
2) Steps to configure storage system in archving projects.
3) Do i need to do anything more than the stpes specified above.
Thanks,
Visvesh

Hello Swarna,
I will always prefer to use a different content repository rather than going with other repository which is already in use. This will help in management of post archive pdf documents effectively in content server as well as legal requirement management.
If one file size is 95 MB then if system takes 04secs to archive then it is very good response.
I am thinking that you wanted to mention it as 0.95MB but by mistake u mentioned as 95MB.
If it is 95MB then for archiving 10000 pdf documents it will require full day.
However for 0.95MB size of pdf file archiving i would suggest to go with saparate content repository.
Hope this answer will help you to take up further decisions.
-Thanks,
Ajay

Retrieving grades from project archive

I have a project that will no longer open: crashes on application launch. ( I suspect corrupt h264 files messed things up). I opened archive to retrieve grades but soon realized that they are not saved in the .colorgrade package format. I was able to duplicate a test grade and copy my needed settings from archive folders into .colorgrade package folder. This worked and I could load them in new project. Is there any way around this manual copy and paste? And what are those extra zeros in the setting names?
Michael

Did you try an "Import Color Corrections" from the old project into a new one?
H264? Not a supported codec for import.
jPo

Project Server 2013 on premises Project Archiving not happening

Dear All
I have a small problem, in that my overnight jobs are not kicking off. Things like the Scheduled Project Backups and the OLAP cube. The cube builds ok if I do it manually, it just doesn't even start overnight.
I've had a look in the Time Job Status page in Sharepoint, but simply can't see anything there that indicates there is a scheduled job for the backups or the archive. Nothing appears to be failing, it's just not there.
If anyone has any ideas I'd very much appreciate it.
John.

Hi Paul
I used one of my calls with MS for this in the end, and after much checking and deliberating they came up with the same solution as you did. Thought you'd like to know.
The actual issue was that my PWA instance had no WebAppUsername account against it, quite how I managed to do that I don't know. The following Sharepoint Powershell commands identified that little problem.
$serviceapp = get-spserviceapplication | ? {$_.TypeName –like “*Project*”}
$pwainstances = $serviceapp.Sitecollection
$pwainstances
The final command prints out a table of information for each PWA instance, thought it might be useful for someone if they experience a similar problem.
John.

Project archiving

I have an Xraid (3.7TB) that is out of space and bought a Granite Rack with two 500g drives, expadable to 8 drives. I am trying to figure out how to best archive my projects with media manager or exports. There are different types of projects basketball games, oral histories, academic lessons, etc...
Now I know the basketball games are somewhat strait forward and probally can just do an export with them because they will never need to be edited. The others may need to be edited in the future or some of the files (clips) I may need in the future for using in other projects.
What concerns should I have when using Media manager? How should I set it up? Should I save the render files with it? I have a basic understanding of it but don't want to lose anything that I might need later.
When I first bought the Xraid I was a newbie to FCP. There are files all over the raid that are used in different projects.
Finally, in the beginning I used to capture from tape, but for the last year I have been using a Firestore, so there are no reel names. how should I address this?
Sorry for the long post. hope someone can give me insight on this matter. Thanks.

I'm with Bryan. Why are you keeping this stuff?
But we all have similar issues. (Caution: Advice like this is only valid if you think like I do.) What to keep, what to toss? Where to keep it, how to find it? Don't add more storage to a bloated situation! If you're holding onto useless footage, you're losing money. If you're not selling your footage, you're actually paying your clients to store their work for them. If you're going to continue such philanthropy, buy cheap FW drives and offload the projects using MM or just copy your media folders and hope you can sort it out later.
Send your clients a note saying you are no longer going to store their projects for free and offer them an attractive deal that makes you look like a saint. Your note clearly states how long you will hold the project, say, one year, for free, or that you will sell them the FW drive for a hundred dollars. After six months send them a reminder note and then start recycling your FW drives.
DO NOT OFFER TO BURN DVDs. Clients do NOT understand the difference between MPEG2 and DVDROM.
Keep the stuff you need or want. That's a clerical job and asset management tedious as heck. Create a folder somewhere and drop copies of your keeper footage into it. Sort it when you can. (Buy "The DAM Book" from Oreilly for realworld suggestions on how to create and manage asset/archive systems.)
Can't help you on the Firestore issue, sorry, but there are thousands of users out there somewhere. Dunno if the mfr has a user forum but the manual should have given you some workflow suggestions.
Please drop by your thread sometime soon and tell us what you've been up to on this issue. Your experience will help many others who find themselves in similar situations. The tendency to keep everything is a disease.
bogiesan

Can you edit an archived project?!?

I have a wedding project archived through iDVD08. I want to replace one song in the Reception of the movie. I do not have my original iMovie files anymore due to file size and hard drive limitations.
Does anyone know if I can re-edit my archived project?
Thanks to all!
Greg

OK... the Archive is a package. Control-click on it and select 'Show Package Contents'. Then the path is Contents>Resources>Assets>av Your movie clips will be in the av directory. COPY the movies you want and paste them in a new location. DO NOT simply drag them out of the package!!!!!!!

Project Archive?

Similar Messages

Maybe you are looking for