Project code mask problem

Dear All,
Presently we use project codes as " H.00.HXX.000.00.00.00.00 "
Now we have created project upto series H.08.HXX.999.
We are unable to create H.08.CXX.1000 or further.
Now I tried to change the coding mask in the config by changing H.08.HXX.000 to H.08.HXX.0000 , but the system is not allowing the same.
Please suggest me on this matter.
Regards,
Vishal

Hi,
Thanks for the reply.
I think  what u have suggested is  right.
But still I am  looking for possibility of the same.
May be OSS note could of some help.
Thanks again.
Regards,
Vishal

Similar Messages

  • Project coding mask problem

    Hi friends,
    My coding mask is: 00/XXXX.X.XX.XX.XX.XX.XX
    The First six characters are for the Project definition.
    First I created the Project definition, eg: 13/0000.
    Then I created the top level WBS element which will be the same as the Project definition, 13/0000.
    Then I created the 9 second level WBS elements (limit is 9 as per the coding mask) eg: 13/0000.1, 13/0000.2 and upto 13/0000.9
    Then I want to create some 20 WBS elements under the first WBS element (13/0000.1). At this time the system is allowing me to create the first 9 WBS elements, i.e, 13/0000.1.1, 13/0000.1.2 and so on upto 13/0000.1.9. According to the coding mask the system should allow me to create upto 99 WBS elements at this level. But this is not happening. I am surprised. I want to know why this is happening. Please help me out.
    regards
    Pratap

    Sorry for the delay in reply. There was some problem in SDN website here as a result of which I was not able to post my reply.
    In the meanwhile I found out the reason for this problem.
    My coding mask was 11/XXXX.X.XX.XX.XX.XX.XX
    Since it is 'X', the project creation was not being allowed to create more than 9 WBS elements.
    I then tried changing to 11/XXXX.0.00.00.00.00.00
    Now it is working fine.
    Thanks for your support guys.
    But I have one more doubt now.
    I have the old Coding (11/XXXX.X.XX.XX.XX.XX.XX) in my quality server. How do I make changes and transport it now? I may face problem since I have already created projects in the quality server with the old coding mask. Please sugget.
    regards
    Pratap

  • Print Layout designer problem:project code

    Dear Experts,
    I tried to put database field 'project code' from table 'journal voucher entry' at repetitive area of journal voucher. It doesnot show when printing out.
    I already entered project code at line level of journal voucher in SBO 2005A.
    Thanks
    Kamthorn

    Your problem is certainly solved. I have replicated in SBO 2005A SP 01 PL 29. It is easy to do that. Indeed, I did not print it yet. When preview it, does the field appears ?
    Rgds,

  • Error while approving change document(TR lost project code)

    Hi All,
    I am having issue in change document approval, when we are approving change document for unit testing or if release management approving change for pre-production or production approval, we are getting error, I started coming from last two days only,\
    when I did detail analysis,  in all transports project code related to change document, disappear
    although if I create new change document, project code appear,
    Do we have  way to solve this issue?, I even not able to decouple the transport from change document, it giving error, do we have way where we can resync change document and transport?
    Dinesh

    Hi All,
    Do anyone have some solution for this issue?, it  is bigger than I thought, I can check it impacted all systems, and all transports,  all transports seems to issue they lost project code in it we rollover maintenance cycle last week and this problem started from their, we put charm master note and few other charm fixes(notes) last week,
    this problem not coming any new change document, but all change document created before rollover impacted
    Dinesh

  • Error while "Project Code Generation" in Entity service

    Hi SDN's,
    I have created an entity service which is the help documentaion of NWDS. After completion of all steps while generating project code i am getting an error called "AbstractStringBuffer not reachable"
    Can any body help me in solving this issue.
    Thanks in advance

    Hi Raju,
    it seems like you have a version problem, try to use jdk 1.4 or higher and try.
    Or go to
    Prefrences --> Java --> Installed JRE's here change the Jdk to the latest,compatable version
    Sometimes reinstallation also solves such problems.
    Award pts if help full
    Cheers
    Souza

  • Use of Project Code

    Hi to everyone,
    Can we assign a  Project Code as default for a user.
    Thanks
    Kentish

    Hai Kentish Bhowaneedin
    Please try this ,in payment , write as FMS query based on series for example
    SELECT  T0.[PrjName] from oprj T0 where T0.PrjCode = 'PR-HO-NW'  and $[orct.series] = 431
    this will help u when the user choose series project code will select automatically,but this is not a solution for your problem but you can try as work around

  • Project coding mask in PS

    Dear Sap gurus,
                          Can anyone explain what is project coding mask in project system.please very urgent
    Thanks&Regards
    p.srinivasan

    With the project coding you will going to idntify the project definition and WBS elements in SAP.
    In Customizing for "Project Number Coding Mask", you define the appearance of the coding masks.
    Also in Customizing for "Special Characters" table, you specify the special characters for WBSs, and you also specify the following for the project coding: whether coding must be used, how long the key should be, and whether this length is compulsory. Also a temporary placeholder for determining a project number automatically.
    So based on the organizational requirement you will identify how the project coding should look like.
    Say for Eg. for company code NLY0, I want start all the project naming should start with NLY0-XX-XXXX.
    you specify how a project number in customization for editing. You can maintain the following parameters for editing the project number:
    The length of the key for project coding 4
    and many special characters, specifying whether the key must have this exact length or whether it can also be shorter. Special characters to enter WBS elements faster. An indicator specifying whether only coded project numbers can be used to create projects....so on.
    Like that based on the organization requirement you can maintain you own project coding.
    If you satisfy with the answer, reward the points accordingly.
    regards,
    Harisha

  • Project code scenario

    Hello Experts,
    I create B1 to B1 synch Project code scenario (object id 63),
    The process runs immediately to the DB queue monitor and stays there,
    It's not running in to failure and I can't understand what seems to be the problem.
    Best regards
    Nir

    Hi Nir,
    local object id 63 belongs to a B1 service object called "ProjectsService".
    In B1iSN you need to create a special B1 object for Service Call ( B1iSN Tools --> Development Tools --> Object Type Generate ):
    Therefore the first field Category needs to be filled with ObjectType Definition for B1 Service Calls.
    The ServiceCall details need to be maintained behind the "Details" button.
    Best regards
    Bastian

  • Project Code report

    Hi im having problems creating a Project Code Report, in one in SAP Business One is good, but i would like to see the account name beside the Account code and omitt certain codes i.e. sales etc - this i can do by the Where statement (T1.Segment_0 < [%1] which im happy enough with.
    im having problems in the Query Generator.
    I cannot get the Debit and Credit to total up and cannot seem to group by Project Code.
    Any help in this matter, would be appreciated.

    the Query is as follows:-
    SELECT T0.TransId, T1.Segment_0, T1.Segment_1, T1.Segment_2, T1.AcctName, T0.RefDate, T0.Debit, T0.Credit, T0.Project FROM JDT1 T0  INNER JOIN OACT T1 ON T0.Account = T1.AcctCode WHERE T0.RefDate >= '[%0]' and T0.RefDate <= '[%1]' and  T1.Segment_0 >'[%2]' and  T0.Project Like '%%_%%'
    I would like to be able to group by Project Code and have the total amount for the Project.
    Many thanks

  • How do I clear the Code Mask in the WBS Code Definition box?

    Hi all, I made a boo-boo when trying to set up a WBS code definition, and I can't figure out how to delete the codes masks as shown below.  DEL does not work on the level rows and there is no "None" choice in the dropdown. Well, as always,
    thx for your help!
    Jigs
    Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

     Ismet, thx for helping, but that procedure does not work here. Trying to delete the last line in the code mask gives this error: 
    and results in this list and an enless loop of the same message until I just hit cancel. This has the feel of a bug. I am using the latest of everything (MS Project 2013 Std. 32-bit in Win 8.1 Pro with all the MS updates). Driving me bonkers :) 
    Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

  • Hot Code Replace Problem...

    Hi Everyone,
    I am using WebLogic 10 with Eclipse. Whenever i start the server in debug mode and make two three changes in the code... WHAM.... I get the Hot Code Replace error. Is there any way so that the server can keep up with the code changes. Publishing the app again takes approx 40 mins!

    Almost always this is a limitation of the JRE/JDK you are using and really
    nothing to do with Eclipse.
    Try a different VM and see if you have better luck
    HTH
    Darins
    "bobz" <[email protected]> wrote in message
    news:75257188f239cb376da31e19b214d2d9$[email protected]..
    > hi buddies,
    >
    > i am getting "hot code replace" problem whenever i change my
    > java code and build the project and access the website without re-starting
    > the server. so, finally i endup with re-starting the server whenever i
    > change the code. this consumes a lot of time. is there any possibility to
    > work without re-starting the server even after the code change.
    >
    > regards,
    > satish.

  • What table stored "project code" field  when post FI Doc

    Hi, all
    I 've  problem about "project code" field in profitability analysis.
    I would like to know what Table that stored data about this field and can
    relate with FI Doc Table.
    Please help me
    thank
    Ray

    Hi:
    Please mention the T.code.
    Additionally, place the cursor on the project code field and press F1.The sytem will show technical information button.Select the technical information and click on it.It will show the table name and field name.
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • Project code from A/P Invoice and GRPO to Journal

    Dear Friends,
    Could you please specify the reasons for the following problem in SAP B1
    The assigned Project code in A/P Invoice and Goods Receipt PO is not getting into its corresponding Journal Entries. But in the same company for other documents this functionality is working.
    Edited by: Paul Finneran on Oct 15, 2009 12:37 PM

    it comes in the row level (line items) of the journal.

  • SP to work in AR Invoice row for Project Code excluding One Document Series

    Hi Experts,
    I have a SP and its working fine to check wether project code is entered in the row level of the invoice. Now I have 4 document series named 1) Wholesale 2) Trading 3) Manufacturing 4) General
    I want this this stored procedure should only check and give error for the series 1) Wholesale 2) Trading 3) Manufacturing and not for series General. Can it be done for SP to warn for specific series and if there is no Project Code given in General Series then the document should be added to the system.
    My SP is as under :
    ----Project Code
    IF @transaction_type IN ('A', 'U') AND @object_type = '13'
    begin
    if exists (SELECT DISTINCT ISNULL(T0.Project,'') FROM [dbo].[inv1] T0 WHERE T0.Docentry=@list_of_cols_val_tab_del)
    begin
    SELECT @error = 10, @error_message = N' Project Code is missing....'
    end
    end
    Is there any options by which I can use the same SP for all marketing document by making a single Stored Procedure or I have to make seperate for each individual marketing document.
    Regards,
    Kamlesh
    Edited by: Kamlesh Gupta on Mar 21, 2009 1:15 AM

    Hi,
    I am trying to write a SP as under :
    ----Project Code
    IF @transaction_type IN ('A', 'U') AND @object_type IN ('13','15','16','17')
    begin
    if exists (SELECT DISTINCT ISNULL(T0.Project,'')
    FROM [dbo].[inv1] T0 INNER JOIN [dbo].[OINV] T1 ON T0.DocEntry = T1.DocEntry,
    FROM [dbo].[dln1] T0 INNER JOIN [dbo].[ODLN] T1 ON T0.DocEntry = T1.DocEntry,
    FROM [dbo].[rdn1] T0 INNER JOIN [dbo].[ORDN] T1 ON T0.DocEntry = T1.DocEntry,
    FROM [dbo].[rdr1] T0 INNER JOIN [dbo].[ORDR] T1 ON T0.DocEntry = T1.DocEntry
    WHERE T0.Docentry=@list_of_cols_val_tab_del
    begin
    SELECT @error = 10, @error_message = N' Project Code is missing....'
    end
    end
    to block documents which does not have poject code but I am getting an error while executing it as under :
    Msg 156, Level 15, State 1, Procedure SBO_SP_TransactionNotification, Line 275
    Incorrect syntax near the keyword 'FROM'.
    Also note that when I am having only one SP as under :
    AR Invoice Project Code
    IF @transaction_type IN ('A') AND @object_type = '13'
    begin
    if exists (SELECT DISTINCT ISNULL(T0.Project,'') FROM [dbo].[inv1] T0 WHERE T0.Docentry=@list_of_cols_val_tab_del)
    begin
    SELECT @error = 10, @error_message = N' Project Code is missing....'
    end
    end
    then if in AR invoice there is No project Code then its giving an error to put to project code but after putting the project code in the row level also the AR invoice is not getting added to the system. It gives me the error as
    [ADOC] Project Code is missing....'
    What might be the problem please let me know.
    regards,
    kamlesh
    Edited by: Kamlesh Gupta on Mar 21, 2009 11:25 AM
    Edited by: Kamlesh Gupta on Mar 21, 2009 12:28 PM

  • Coding mask problem

    Hi All,
    I am facing the problem in coding mask.
    I have existing project coding  mask let say abcd :000/0/0/00 like this. here i am using project id of 4 char and remaing 20 for coding.
    i will like to use project id as abc and remain 21char for coding but
    system is not allowing me to create new error says abc already present.
    then i tried with different char like xyz but still it is restricting me to use 20 digit only in coding mask
    what is  problem ? how can we solve it
    regards
    shiv

    Hi Martina,
    I have one doubt.Suppose we configure Length of coding key= 1, define a coding mask A-0000 and create a operative project A-0001. Then sytem doesnot allow us to change the length as operative project exists. Now if we have had length 2 earlier (instead of 1) then system will allow us to change the length to 1,3,4 or 5. If we change the length to 3,4,5 we can go back to length 2/1 later. But if we change length to 1 then our existing project will get assigned to existing coding mask and system will not allow to change the length later on.
    Does this mean that, though we have 1 to 5 options for coding key length, once we have selected a particular length and have coding mask of that particular length, create a operative project with that mask, then we cant change the length of coding key? In short we need to decide the length only for once, at the start of implementation and cant change it once we have operative projects. Or you know any method to go back to earlier key length in case opeartive projects exist?
    Request you to please comment.
    Regards

Maybe you are looking for