Project Conversion from 11.03 to R12- need help

Hi All,
I need some information regarding conversion from 11.03 to R12 along with Capital Project's conversion, do we need to take care Asset Assignment and Assets information at the time of Project Conversion. Iam doing Project and Task conversion different. Is there any good mapping document or Conversion FD, if any body have please send my mail ID. [email protected]
Thanks for your help.
Thanks,
Srini..

Usually only Open Invoices and Unapplied Receipts are migrated from Old system to New Instance.
Post Migration Reconciliation shall be tough in that scenario. Reconsider/Rediscuss with Client.
Migration can be done using APIs or Custom Scripts using Standard Interfaces.
Hope this is helpful
Regards,
Sridhar

Similar Messages

  • I would like to remove a short gray edge from two images. I need help in that I am not yet able to use PhotoShop. Could somebody kindly help me with this?

    I would like to remove a short gray edge from two images. I need help in that I am not yet able to use PhotoShop. Could somebody kindly help me with this?

    I doubt it Doc Maik, but I am certainly happy to learn The image is this one (and a similar one). They would be beautiful portraits if not for the "extra mouth". The grey edge that I would like to remove is the excess of (grey) mouth that is actually my horse's chin, but that in the pictures looks like a wider, looping mouth. Practically, looking at the picture, the "extra mouth" to the left. What I would love it to be able correct that to look like a normal mouth, which means that half of the protruding edge should be removed. I am not sure I was able to explain myself, but here is one of the two pictures. I thank you for you kindness in being available to advise me.

  • TS2776 unable to sync notes from itunes to pc ..need help!

    unable to sync notes from itunes to pc ..need help!

    Here is the info I've been hunting for: http://support.apple.com/kb/HT4204

  • Hi I am receiving thousands, yes thousands of eMails from APPLE Support Communities, In My inBox there is more than 26.000 eMails from these communities, and i Need Help from you, i will appreciate.I am not panicking but i've ever seen this !

    Apple Support Communities
    HI
    I am receiving THOUSANDS, YES THOUSANDS of eMails from ALL Apple Support Communities.I deleted some one thousand but still more than Normal.
    Please i need your Help.This is Enormous!!! I've never seen this happening! It should be a huge mistake that everybody from All Apple Support Communities
    sending me their complains? I think it is a big Mistake, or Something bigger, i don't Know! I just need Help in this moment. it's been more than three or four days
    i saw a number of eMails from Apple Support communities landing in my eMail address, should this be normal? I don't think so.
    I appreciate any Help
    Kind Regards
    & a Happy New Year

    Click Your Stuff in the upper right and select Profile. In your profile there is a link to the right to manage email notifications.

  • Migrating from iMac CD to MBPC2D - Need Help with the FIle Migration

    I just ordered a refurb 2.4 MacBook Pro, which will replace my iMac Core Duo as my main machine. The iMac is running Tiger. I've decided that I only am concerned with migrating the following information from the iMac, and want some help on the best way to do this (paths/locations would be helpful too):
    -iPhone backups - to ensure my iPhone doesn't get wiped when it syncs. I will want to copy the last backup over to the MBP.
    -All iTunes Music and Movies
    I will then manually re-install VirusBarrier x4, MS Office, etc. I think this is better than trying to migrate everything over. What do you think?
    Edit: I also have a FireWire external hard-drive available to assist with this.
    Thanks
    Message was edited by: Azeroth

    Folders You Can Move to Your new Mac
    From the Home folder copy the contents of Documents, Movies, Music, Pictures, and Sites.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
    /Home/Library/Preferences/ copy any preferences needed for third-party applications, iTunes, iCal, Address Book, Safari.
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    For FireFox:
    /Home/Library/Applications Support/FireFox
    /Home/Library/Preferences/org.mozilla.firefox.plist
    Credit goes to another forum user for this information.
    Read the following about moving iTunes: iTunes- About Music Store authorization and deauthorization.

  • I just deleted photos from my iPad. I need help on recover these photos

    I accidentally deleted photos in my iPad. I need help to recover these photos. Thanks

    Restore from your Backup or Re-Sync them from your computer where you have been regularily Transferring them to.

  • I was erase all contect and data after it it showing only apple  logo from last 2 hour i need help

    i was erase all contect and data after it it showing only apple  logo from last 2 hour i need help

    You should reset your iPhone,
    Reset your iPhone by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPhone will then go through a reset / reboot procedure and will be ready for use within about a minute.
    Don't worry about doing this as you will not lose data or settings.
    Good luck and do report back.

  • Deleted Database from OEM Page showing pending - Need help pls..

    Hi..
    I need urgent help for this issue. Yesterday I saw a production database was not communicating on the OEM home page so I deleted it from the page restarted the agent on the server and re-added it to the OEM home page (10g OEM). It has been showing pending since yesterday and is still uploading XML files. I forced an upload of files using emctl upload agent and it is still uploading and showing pending. Is there any way I can get this PRODUCTION database to show up normal and be accessible in OEM? I need help on this soon as we need to have it available in OEM for monitoring... Also, it should still have it's history even though I deleted it from the database page. Correct?
    This is the status output:
    Last successful upload : 2013-01-23 09:45:34
    Total Megabytes of XML files uploaded so far : 3.43
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 27.00%
    Last successful heartbeat to OMS : 2013-01-23 09:44:41
    Agent is Running and Ready
    i23m9:FSRPT:/orasw/EMHomes/agent10g/bin> emctl status agent
    Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
    Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
    Agent Version : 10.2.0.5.0
    OMS Version : 10.2.0.5.0
    Protocol Version : 10.2.0.5.0
    Agent Home : /orasw/EMHomes/agent10g
    Agent binaries : /orasw/EMHomes/agent10g
    Agent Process ID : 8388808
    Parent Process ID : 28573750
    Agent URL : http://i23m9.ucsf.edu:3872/emd/main/
    Repository URL : https://vx27.ucsf.edu:1159/em/upload/
    Started at : 2013-01-23 08:35:22
    Started by user : oracle
    Last Reload : 2013-01-23 08:35:22
    Last successful upload : 2013-01-23 10:05:31
    Total Megabytes of XML files uploaded so far : 4.07
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 27.00%
    Last successful heartbeat to OMS : 2013-01-23 10:04:44
    Agent is Running and Ready
    Why does it show 0 as the number of files pending upload, but still uploading files? The number of file uploaded so far continues to increment.
    Thanks so much for your help!
    NS
    Edited by: EastBay_Oracle on Jan 23, 2013 10:05 AM
    Edited by: EastBay_Oracle on Jan 23, 2013 10:14 AM

    You are able to access all the DB pages because the OMS makes a direct connection to the target DB to retrieve in information in these pages. The historical performance details are also queried from the AWR of the target DB and is not stored in the Grid control repository DB.
    The status is however computed by the Agent monitoring this DB. If the DB status is incorrect though it is running, it means that the Agent is unable to compute the status or has incorrect monitoring configuration details for this DB. You can check this by choosing the Database and clicking on the 'Configure' button. Review whether all the database details are correct and attempt a 'test connection' in this page.
    Regards..

  • Sim not valid. I have reset the phone after reseting my sim not working. it says sim not valid and it is not from a carrier. I need help

    my iphone 4s display sim not valid message. Even though I have tried different sim just to see if the problem with sim or not. I need help. this is a phone from my boss (used phone). but he is now on holiday for a month. I need help here so that I can use the phone. Any help?

    saniroman wrote:
    When you say carrier did u mean perticular network provider which had originally (like vodaphone, o2 or EE)?
    Yes, the original phone carrier prior to you using your phone carrier.

  • I Bought a Mac mini from the U/S. I need help changing the software to Canadian

    I need help to change to Canadian software. I keep being refered to the U/S which has more restrictions on some books and iTunesU. I also lost $9:00 due to the U/S not recognizing my acct.

    So, when you set it up you gave it Canadian info & Timezone?
    I wonder what People do that travel with Macs???
    Is your Apple Account/ID US or Canadian?

  • Latency Between Outputs After Project Conversion From Logic Pro 9

    hiya!
    i am experiencing a bizarre kind of latency – between outputs. for example, audio assigned to stereo outs 13-14 will leave my system 120 or so ticks after audio assigned to mono outputs 3 or 4. sometimes mono outputs are out of sync with one another too. there's no apparent rhyme or reason, and the latency itself seems to shift – even with plugins turned off and removed from the channel strips. if i have an aux that's outputting to channels 7-8 and do a send to an aux that outs to 13-14, this audio should be perfectly aligned, but it just isn't.
    i experience this problem in sessions converted from logic 9 to logic x, though sometimes it seems to happen within sessions started in logic x. i can't for the life of me figure out why it's happening, but do believe there's some sort of error being introduced in the conversion. i can't find anything anywhere on the internet about it.
    one temp fix i found was to insert an I/O plugin into the problematic aux, turn it on with an out assigned, then turn it off. sometimes that's worked, and sometimes it hasn't. i've been able to use delay compensation on certain tracks, but it's not an exact science, and sometimes the compensations themselves need to change in order for the tracks to sound aligned. it's beyond aggravating. in some situations, i've had to re-record entire sessions. not tight!
    to be clear, this is not about monitoring latency, or having to slide tracks into alignment after recording, or the waveforms on the screen not matching up with what i'm hearing. this is not about plug-in latency. the situation i'm describing happens when plugins are entirely removed: audio that is supposed to be leaving logic at the same exact time via different outputs is somehow not aligned.
    my signal chain:
    logic pro x.0.7
    mac pro quad core (trash can) into -->
    apogee symphony 16x16 -->
    neve 5059 16x2x2 -->
    api 2500 -->
    back into the symphony
    i've been assured by both apogee and neve and sweetwater that this is not their issue--it's logic pro x. i'm inclined to agree, since it seems to be happening before the audio leaves logic.
    please help! many thanks for anything!

    godmodeinternet wrote:
    thanks for your reply!
    to answer some of your answers:
    -i have all my channels go through auxes, in all projects, but i did attempt to route audio straight off the channels and encountered the same situation i described above.
    -plug-in latency is likely set to ALL at all times, since i often track while in the 'mixing stage'. this is how i've always done everything.
    ugh. the worst!
    do you think there's anything in environment i might be able to swap around that might have gotten screwed up in the conversion?
    thanks again.
    I don't think it's an Environment issue, however, quite a few people have reported some corruption when importing Logic 9 projects, it usually takes the form of random Inspector Settings for Delay/Velocity and Preferences/Audio - Recording Delay  being set to something other than 0 <zero>. This doesn't sound like your problem. Also sounds like your Plugin Latency setting (ALL) isn't the problem.. although if you're recording while mixing it should be set to Audio & Software instruments.
    Have you used your hardware system successfully on an earlier version of OSX and Logic 9?  If so then the answer is apparent, especially so if you notice it on projects started in Logic-X (current system) although it my take a certain level of project complexity before it shows up.

  • Microsoft Project conversion from trial to permanent

    I have a trial version of 2013 Microsoft project trying to convert or 'reactivate'.  How can I?  Very frustrated.

    I'm not sure I understand.  The Trial is time limited so it can't be "reactivated."  Have you purchased a license with key and now want to use that key on the trial?
    If you have purchased a fully licensed version you may be able to apply that key to the trial through control panel.  Find Project in the list of products in control panel > programs.  Select it and choose the "Change" option at the
    top of the screen.  Select Enter a Product key.

  • Multi track project  shows audio track 1 & not 2  need help!!!!

    hello everyone... Have a sequence in fcp 1 video track 2 audio tracks i right mouse click the sequence go to send to click on multi track project it sends to soundtrack pro but only track 1

    This would frustrate me in the beginning and sometimes it will come back to me. I'll blame that on the Pro tools I have installed. Make sure that device is enabled in controll panel, hardware. Disable the ones you don't use. I don't think AA will recognize usb or firewire hardware if that is what you have. Needs to be a card. I use the M-Audio Delta L1010. 8 inputs. I use 8 direct outs from my mixing board into the 8 inputs on the card. Sounds very good for the price.
    Good luck.
    Donnie

  • Understanding FCP7 (from a Premiere Pro background) - Need help

    Hello all,
    I have spent the better part of the past 5 days doing a couple video edits of projects that I had already completed in Premiere Pro CS4, in an effort to learn Final Cut Pro 7. I have a few observed differences that I am hoping the FCP veterans can help me understand. I am not new at all to video editing but I am neophyte when it comes to FCP7.
    As resourceful as I think I am, I cannot find any references to others who have observed these differences which makes me wonder if the issue is mine entirely.
    *Previewing sequences is time consuming*
    The same project that I completed in PProCS4 works to simply press play in the canvas to see the preview without needing to render. I am using the same elements in both projects. FCP7 will not attempt to play the preview unless I render (which seems to be taking 30 minutes to an hour for the particular project I am working on).
    *Adding graphics or text layers have a two-minute limit in the timeline*
    Unless I am prepared to copy/paste the 2:00 clip numerous times in the timeline or know ahead of time to extend the duration in the preview window before adding it to my sequence, I will be out of luck. I don't seem to be able to simply grab the right handle on the clip and extend it out to match the timeline of my full sequence if I so desire.
    *Imported clips behave differently in each application*
    As you may have read in another thread, I was having troubles with an imported WMV file that works fine in my PProCS4 installation, but required me to use MPEG Streamclip to convert it before I could use it without audio/video sync issues.
    Please don't hear me saying one application is better than the other as I fully expect that they each have their place, but I feel like I am struggling unnecessarily with basic functionality in FCP7. I am sure it's a training issue. I am hoping you all can help me better understand.

    OK...here's where you are making a very basic mistake. Final Cut Pro is a broadcast format based editing system. Meaning that it deals with video that meet video production standards. DV (720x480), Broadcast SD (720x486), HD (1280x720 and 1920x1080) and 2K and 4K (film) standards. Anything that doesn't fall within those standards aren't really well suited for FCP. So your 1024x768 sequence setting, and file type won't be the best way to test out and learn FCP. Those are computer monitor dimensions.
    Premiere might be well suited for what you are currently working on. But if you want to start learning FCP, I suggest waiting until you have a video production based format to work with, and that you capture that footage with FCP, not another NLE.
    Shane
    Message was edited by: Shane Ross

  • Switching over from pc to mac and need help!

    Ok so I plan on getting the new imac they are revealing today, but I'm not completely sure how to transfer all my music over from the pc and how the iPhone will sync as I've heard that the mac didn't recognize the iPhone after it had already been synced with a pc. I was just going to buy an external hd for the music and other things, but I really don't want to spend $100 plus for something that is only for transfer and some backup. I was considering burning cd's as well as I only have about a 250 song library and many blank cd's. Which choice or other option would be best? As for the not recognizing problem, is there something I have to do to like "format" it for mac and a feature I need to set up on the mac? Any help is appreciated.

    taymon21,
    The iPhone will show up on both a Windows-based PC and a Mac without needing to be reformated. From the File Menu in iTunes you can choose to sync your purchased music back to the computer.
    In addition the Apple Retail Stores offer a service to move your files over.
    You can burn approximately 150-200 songs per CD as a Data CD in iTunes, and import from there if you would like. You can set the CD Burning preference in iTunes in Windows by going to the Edit Menu, Preferences, Advanced Tab, then the burning section. Choose the option for "Data CD"
    Hope this helps,
    Nathan C.

Maybe you are looking for