Project corruption with lots of samples loaded

I was going out of my mind. I bought a bunch of new sample libraries. Symphobia and some PLAY libraries.
If I loaded too may samples, the project would become corrupted and it was bad.
Just clicking on some midi regions would instantly crash the machine.
Mac Pro 8 GB ram.
I opened the activity monitor and found that If I exceed 2.5 GB of actual memory, the project starts getting corrupted.
There seems to be a lot of memory leakage problems in Logic 8. If you open and close a few projects in a row, the memory usage bloats up big. I have to restart Logic to get it back.
Sometimes I will restart the machine just to keep it fresh.
If you load a lot of big sample libraries ( 3rd party stuff Kontakt and Play) Keep an eye on your memory usage.
Sometime I would record a sound that used a lot of memory as an audio file and remove the memory hungry plug in. Freezing doesn't help, the samples are still loaded.

Upgrade to Kontakt 3.5 for free and get rid of the memory problems - Kontakt now uses it's own Memory server (KMS) and doesn't bother Logic's RAM limitations anymore

Similar Messages

  • Open Captivate 6 projects with Captivate 7 error - loading video

    Hi!
    I have several projects created by Captivate 6 and now we upgrade to captivate 7.
    When I tried to open it with Captivate 7 a Loading video window appears several times, the project is opened but I cannot to do anything because these loading videos are still in process. But nothing happens.
    Can you help me?
    Thanks!
    videos format: .flv

    Hello ,
    Can you tell me where have you saved your projects ? make sure they must be opened from local computer not from any network location.
    Please open a blank project and check are you able to add any video in it .
    Can you tell me the eaxct version of Adobe Captivate 7 you are using (Go to Help > About Adobe Captivate)
    Thanks and Regards
    Himanshu Satija

  • IMovie project corrupt after crash?

    I have a problem with a seemingly corrupt iMovie project
    I have been working on a holiday movie for over 12 hours
    Today, my macbook pro crashed while editing the project
    Aftwards I was unable to load the project.
    Other, older projects can still be loaded with iMovie.
    I suspect the project has been corrupted due to the crash.
    I don't have any back-ups (Time Machine is not activated)
    Are there any other ways to fix the corrupted file or is it permanently damaged and won't I be able to open it again?
    Thanks for your help and insights!

    I'm new to iMovie, and to the Mac, and for years I have heard about how wonderful the Mac is. While it doesn't have the same problems as a PC it has plenty of its own problems.
    I just spent 20 straight hours putting together a movie in iMovie. As I clicked to make my very last tweak to my project, iMovie crashed.
    I tried to get a hold of Apple support but their system doesn't allow access to an actual human being. Their system make you go through a series of steps to "arrange for a phone call from Apple". That system fails EVERY TIME. I get to the end and a messages pops up saying that they can't help with my problem at this time, try again. I've had a Mac for three months now and their support system fails every, single time.
    So, on to the problem at hand. As I read the various forums about iMovie it has struck me as rather odd that no one seems to have a problem with the engineers at Apple creating a software package that does not allow you to save your work. Now, it took me all of a nano second to realize the likely out come of such stupidity. And, on my very first big project my prediction came true. iMovie crashed as I finished my project and destroying all of my work.
    So my first question is, how could the engineers at Apple possibly justify not including a "save" and "save as" function to iMovie? The absurdity of this reaches new heights. This has disaster written all over it. And it appears that many people are having the same problems.
    Secondly: I've read messages from people who seem to think that not having a "save" or "save as" function was a brilliant stroke of genius. OK, so this question goes out to those people. If it is so brilliant then please explain to me how I can recover my last twenty hours of work? If there had been a "save" function I would have been saving my project all along the way and I would only have lost the last half an hour or so and not the entire 20 hours.
    So, tell me. Precisely. Step-by-step. How do I recover my work.

  • Large iDVD Project (help with iMovie formats, time totals, quality)

    Hi,
    I am in the process of finishing up a large DVD project. I went on a six month backpacking trip, and have lots of photos/small clips to make a DVD from. I will have a main menu in iDVD with submenus for each country (Mexico, Cook Islands, NZ, Australia, Vietnam, Thailand, India)
    On each submenu will be around 4-5 movies of around 2-5 minutes each.
    I created movies using iMovie (imported sound-less iPhoto slideshows 640x480 expored as MOV file) and added captions, music etc in iMovie. Each 'movie' is about 1-5 minutes long.
    First question:
    What is the best format to export these movies in? I will be adding them to iDVD. But when I export them, they are around 100-700Mb each depending on time of the movie. I used the expert settings (to Quicktime Mov) using the following settings:
    Video:
    Compression: Mpeg-4 Video
    Quality: Best
    Frame Rate: 60
    key frame rate: 24
    Dimensions: 720x526 4:3
    audio:
    format: AAC
    Sample rate: 48.000Khz
    Bit Rate 128
    Stereo
    In my iDVD project - the menu loops are maximum 30 seconds each, with the audio cut to the same length (ie. not trimmed in the menu - the actual mp3 added is 30seconds etc)
    Now, big question is:
    Do I have a total of 2 hours for everything? All menus,and all movies ? Is there ANY way of calculating this in iDVD or do I have to do it manually (estimate) ???
    I notice with iDVD 8.0 it has a indicator of the space available etc. I have iDVD 6.0 so that doesn't help me now I guess?
    What I need to ask is that - maybe using expert settings to mov files is unnecessary? What would you recommend as the export settings?
    I have been working on the iMovie projects for months and can re-export them all in different format if need be, and can simply re-add the movies to iDVD. I have set up the shell of the DVD in iDVD but not added the movies yet (I have the placeholders there for them).
    Anyway - hopefully I haven't blabbed on too much that someone out there can offer some advice?
    Cheers and THANK YOU!
    Alessandro

    Best Performance: For projects up to one hour
    Best Quality: For projects up to two hours
    If your project is longer than one hour, you have to use Best Quality. Generally, the quality will be fine but the closer your get to that two hour limit, the more possibility you have of seeing some quality hits.
    I deal with lots of long projects and generally if a project is longer than 90 minutes (specially since my projects have lots of fast motion, low light, etc) I split them up over two DVDs, keeping each under the one hour limit. That does give you your best quality option

  • Using slideshow with lots of pictures crashes all the time

    I am again working on a project with 400 pictures.  As I try to get then into the project, the thing just crashes all the time and I have to load back up.  Since this has happened to me on many projects, but I do not see others having issues, this implies others do not use slideshow much with lots of pictures.  And this time it is a DVD.
    Dave

    With PPro can you do a transistion to 350 pictures at one time?
    Yes, with Automate to Sequence, but there are limitations and qualifications. This would be a good subject to read up on, so that all i's are dotted, and t's are crossed, per the requirements of this function. This will apply a single Transition to all images.
    I use Dip-to-Black, Cross-Dissolve and then butt-cuts for 99% of my Transitions. Each is chosen specifically to convey the passage of time, etc.
    Can you get PPro do some random pan and zoom on the 350 in a single step?
    No. Now, I treat each image as unique, and animate each thusly. If I have one image with a face, I may want to zoom in and pan to the eyes, or the mouth. If I have a group shot, I may want to single out one person's face. Even with advanced AI, no program can possibly know what I, the producer, will want from any picture. I have never used any random pans and zooms, as I have my own ideas of what animation should be applied. That is one reason that I can decide on the exact Scale (size) of each image. In a normal SlideShow, the vast majority of my images will be resized to the exact Frame Size of the Project. I then may have a few, that are larger by a good bit, because I will pan on a zoomed out image. Then, I might have some more, that are in between these sizes. I will do a separate folder for each size of image, and use them accordingly. If I have miscalculated, I just do a resize for that image.
    Now, you might want to also look into ProShow Gold, or their Producer program. I am looking at Producer for more "canned" SlideShows, and it looks very good. Have not bought it yet, as PrPro still works well for me, and I still do most of my work by hand and by eye.
    Good luck,
    Hunt

  • Cannot get simple merged HTML Help project going with context sensitive help

    I have built a very simple project in RH9 from scratch, consisting of a main project and a sub-project now after I have modified our large project in changing every hyphens from file and directory names over a couple of days now only to see that context help still doesn't work.
    The map IDs are not visible in the main project. To test it in the example, invoke the CSH-Test (context sensitive help test) from the Toolbox, enter !SSL!\Microsoft_HTML_Help\main.chm in the Offline field  and a number 57 in the ID field. In our large project I'm getting nothing (no window pops up). In this example I'm getting this mystical error box, saying HH_HELP_CONTEXT called without a [MAP] section.
    Christoph

    Hi William,
    thanks having a look at my problem. I read in another thread today a description which comes close to the problem I'm facing.
    Maybe I formed the mini sample not exactly as our problem is situated. (thus the doubled map ids you were claiming).
    I will try to explain again: we have a couple of CHMs in separate single help projects. These go into their own TOCs, Index Glossar etc. like in sub1->Einzel. For the merged project we produce a chm that goes into the directory of the master (main) project, like in sub1->Primäres Layout.
    Each Topic in the sub project (e.g. sub1->Erstes Thema) has a symbolic link address (e.g. "Linkadresse=det_org_angaben), which is mapped to the MAP ID via the .h file.
    This all used to work that way in RH5.
    Now it seems that this information between the map ID and the symbolic Linkaddress gets lost with the merge process.
    I am not using the same ID (57) twice in my example. The MAP ID in the main project comes from the sub1 project (see the yellow locked MAP ID).
    The simplest test is using the CSH-Test in the Toolbox giving the main.chm as the Helpfile to test and enter the 57 as a MAP ID.
    The idea behind is to use one CHM later to have to open in the application. The other CHMs of the subprojects only need to be present in the application directory. Then you invoke HtmlHelp(with the MAPID),like I posted in this thread.
    The method you are suggesting in mapping the ID to the topic in the main project will not work since the topic is in the CHM of the sub project.
    I modified the sample project once again (somehow the baggage files were not showing) to come closer to the constellation we are using in the large project, though I'm getting the "HH_HELP_CONTEXT called without a [MAP] section" error (which does not occur in our large project).
    Christoph

  • Troubles with xmp files not loading...

    I'm having troubles with xmp files not loading with images but are present in the image folders. does anyone know why this is happening and if there is a way to fix this. Also when trying to load the xmp individually they are grayed out and unable to load. I have tried this on different machines (Macs) and still no luck. Any help would be greatly appreciated in this issue.

    > The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
    Aww, yuck!! That's a real drag...
    When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
    So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
    I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
    Guess I won't be using DNG any more..
    Thanks for the help Kees :-)
    Russell

  • My iPad colors are fuzzy with lots of reds and purples.  Did this once before and cleared up.  This time it won't clear up.  Any suggestion?

    My iPad colors are fuzzy with lots of reds and purples.  Looks like my digital camera when it needs to be recharged if that helps describe the issue.  Can anyone help?

    Next step is to back up and restore via iTunes. If the problem continues, restore as a new device and test. If the problem is solved, there is some kind of corruption in your backup file. If it continues, take it to an Apple store for evaluation of a possible hardware problem.

  • What are the Benefits of Synchronizing/ Replicating Project Online with an on-Premise SQL Database

    Hi
    What are some of the reasons and/ or benefits that one may want to consider with regards to setting up and synchronizing Project Online with a on-Premise SQL database ?
    \Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

    Spiro,
    Reporting via Project Online is limited to OData, and writing queries with OData starts getting complex at a certain point.
    So, if your organization in using third party BI tools, or want to use OLAP cubes, or in general want to use straight SQL queries instead of oData, it is generally beneficial to have the data in house for reporting.
    So in general, using the SQL Synchronization, will bring data into "your" organization, as opposed to being with Microsoft so you get a LOT more flexibility with reporting.
    Hope this helps your question.
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

  • What is the best way to deal with different audio sample rates on the same timeline ?

    what is the best way to deal with different audio sample rates on the same timeline ?

    You don't have to do anything special. If possible, start your project with a clip that has the desired target frame rate and audio sample rate, and your project parameters will be set automatically. Other sample rates will be converted under the covers.
    For example, if your video is shot at 48khz, you can add music files at 44.1khz with no problem.
    If you are recording audio that you want to synch with video (multicam), you will get best results if everything is 48khz, but you can use 44.1 if that is all you have. Once I forgot to reset my Zoom to 48,000 and it still worked.

  • BDC with lots of validations and conversions

    hi to all experts,
                           i need a sample  bdc program with lots of validations and conversion.
    thanks

    Hi,
    REPORT  ZMMFTS01A_MAINTAIN_SOURCE_LIST NO STANDARD PAGE HEADING
            LINE-SIZE 250.
    TABLES eord.
    ***Types Declaration
    **Type of Upload File
    TYPES : BEGIN OF ty_final,
             matnr(018),       "Material No
             werks(004),       "Plant
             vdatu(010),       "valid From
             bdatu(010),       "valid To
             lifnr(010),       "Vendor
             ekorg(004),       "Purchase Org
             reswk(004),       "Plant from which material is procured
             ebeln(010),       "Agreement
             ebelp(005),       "Item
             feskz(003),       "Fix
             notkz(003),       "Blk
             autet(003),       "MRP
            END OF ty_final.
    **Type for Error Records
    TYPES : BEGIN OF ty_errmsg,
             matnr(018),
             werks(004),
             vdatu(010),
             bdatu(010),
             lifnr(010),
             ekorg(004),
             reswk(004),
             ebeln(010),
             ebelp(005),
             feskz(003),
             notkz(003),
             autet(003),
             messg(200),
            END OF ty_errmsg.
    **Type to get the existing no of records before comparison
    TYPES : BEGIN OF ty_eord,
             matnr LIKE eord-matnr,
             werks LIKE eord-werks,
             erdat LIKE eord-erdat,
             vdatu LIKE eord-vdatu,
             bdatu LIKE eord-bdatu,
             lifnr LIKE eord-lifnr,
             flifn LIKE eord-flifn,
             ebeln LIKE eord-ebeln,
             ebelp LIKE eord-ebelp,
             febel LIKE eord-febel,
             reswk LIKE eord-reswk,
             notkz LIKE eord-notkz,
             ekorg LIKE eord-ekorg,
             autet LIKE eord-autet,
            END OF ty_eord.
    **Type to get the no of records in the Database after comparison
    TYPES : BEGIN OF ty_eord1,
             vdatu LIKE eord-vdatu,
             bdatu LIKE eord-bdatu,
            END OF ty_eord1.
    ***Data Declarations
    DATA : v_repid    LIKE sy-repid,
           v_datfm    LIKE usr01-datfm,
           v_message(200),
           v_err_rec  TYPE i,
           v_errors   TYPE i,
           v_updated  TYPE i,
           v_matnr    TYPE matnr,
           v_lines    TYPE i,
           v_eord_row TYPE i,
           s_count(2) TYPE n,
           v_fnam(20) TYPE c,
           v_tabix(2) TYPE n,
           v_vdatu(10),
           v_bdatu LIKE eord-bdatu,
           v_datum(10),
           f_option type ctu_params.
    ****Begin of Changes by Pavan  Ticket 648507            "D13K948908
    DATA : s_vdatu  TYPE sy-datum,
           s_bdatu  TYPE sy-datum.
    ****End of Changes By Pavan    Ticket 648507            "D13K948908
    ***Internal Tables Declaration
    DATA : it_eord       TYPE STANDARD TABLE OF ty_eord    WITH HEADER LINE,    "Internal Table for Appending all the Rows of DB Table EORD
           it_bdcdata    TYPE STANDARD TABLE OF bdcdata    WITH HEADER LINE,   
           it_final      TYPE STANDARD TABLE OF ty_final   WITH HEADER LINE,   
           it_err_rec    TYPE STANDARD TABLE OF ty_final   WITH HEADER LINE,  
           it_messtab    TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE, 
           it_errmsg     TYPE STANDARD TABLE OF ty_errmsg  WITH HEADER LINE,   
           it_eord1      TYPE STANDARD TABLE OF ty_eord1   WITH HEADER LINE,   
           it_ctu_params TYPE STANDARD TABLE OF ctu_params WITH HEADER LINE.
    DATA : wa_final LIKE LINE OF it_final.
    ***Constants
    CONSTANTS : c_1  TYPE i VALUE '1',
                c_12 TYPE i VALUE '12',
                c_x         VALUE 'X'.
    ***Selection Screen
    SELECTION-SCREEN : BEGIN OF BLOCK header WITH FRAME TITLE text-002.
    SELECTION-SCREEN SKIP.
    PARAMETERS  P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY.
    SELECTION-SCREEN : END OF BLOCK header.
                     I N I L I T I A L I Z A T I O N                          *
    INITIALIZATION.
      it_ctu_params-updmode = 'S'.
      it_ctu_params-defsize = 'X'.
      it_ctu_params-dismode = 'N'.
      APPEND it_ctu_params.
                   A T   S E L E C T I O N   S C R E E N                      *
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
      PERFORM file_get.
                    S T A R T   O F   S E L E C T I O N                       *
    START-OF-SELECTION.
      PERFORM upload_xcel.
      IF NOT it_final[] IS INITIAL.
        SORT it_final BY matnr werks lifnr ekorg reswk ebeln ebelp.
        DESCRIBE TABLE it_final LINES v_lines.
      ENDIF.
    **To Know the Date Format for the user name in user master record
      SELECT SINGLE datfm FROM usr01
                          INTO v_datfm
                          WHERE bname = sy-uname.
    **Updating the Database based on the Combinations of Vendor/PPL/Porg and Agreement/Item
      LOOP AT it_final.
    *****Begin of Changes By Pavan   Ticket 648507            "D13K948908
        CLEAR : s_vdatu, s_bdatu.
        CONCATENATE it_final-vdatu6(4) it_final-vdatu0(2) it_final-vdatu+3(2) INTO s_vdatu.
        CONCATENATE it_final-bdatu6(4) it_final-bdatu0(2) it_final-bdatu+3(2) INTO s_bdatu.
        PERFORM plant_conversion USING it_final-werks.
    *****End of Changes By Pavan     Ticket 648507            "D13K948908
        REFRESH it_eord[].
        v_matnr = it_final-matnr.
    **Adding preceeding Zeroes to the Material No
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT  = v_matnr
          IMPORTING
            OUTPUT = v_matnr.
    **Adding preceeding Zeroes to the Vendor
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT  = it_final-lifnr
          IMPORTING
            OUTPUT = it_final-lifnr.
    **Adding preceeding Zeroes to the Item
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT  = it_final-ebelp
          IMPORTING
            OUTPUT = it_final-ebelp.
        TRANSLATE it_final-feskz TO UPPER CASE.
        TRANSLATE it_final-notkz TO UPPER CASE.
    Select the Existing Records from EORD for the Combination of Material and Plant of New Record
        SELECT matnr
               werks
               erdat
               vdatu
               bdatu
               lifnr
               flifn
               ebeln
               ebelp
               febel
               reswk
               notkz
               ekorg
               autet FROM eord INTO corresponding fields of TABLE it_eord
                      WHERE matnr EQ v_matnr
                        AND werks EQ it_final-werks.
        SORT it_eord BY matnr werks vdatu bdatu erdat lifnr ekorg reswk ebeln ebelp.
        IF sy-subrc EQ 0.
          LOOP AT it_eord.
    If the Combination of Old Records Vendor/PPL/Porg is same and Agreement/Item
    is also same then delete the Old Record and Upload the New Record
            IF it_eord-MATNR = V_MATNR        AND
               it_eord-WERKS = IT_FINAL-WERKS AND
               it_eord-LIFNR = IT_FINAL-LIFNR AND
               it_eord-EKORG = IT_FINAL-EKORG AND
               it_eord-RESWK = IT_FINAL-RESWK AND
               it_eord-EBELN = IT_FINAL-EBELN AND
               it_eord-EBELP = IT_FINAL-EBELP.
    *****Begin of Changes By Pavan   Ticket 648507            "D13K948908
              IF s_vdatu GT it_eord-bdatu OR s_bdatu LT it_eord-vdatu.
              ELSE.
    *****End of Changes By Pavan     Ticket 648507            "D13K948908
                v_tabix = sy-tabix.
                PERFORM bdc_dynpro USING  'SAPLMEOR' '0200'.
                PERFORM bdc_field USING : 'EORD-MATNR' it_final-matnr,
                                          'EORD-WERKS' it_final-WERKS,
                                          'BDC_OKCODE' '/00'.
                PERFORM bdc_dynpro USING  'SAPLMEOR' '0205'.
                CONCATENATE 'RM06W-SELKZ(' v_tabix ')'  INTO v_fnam.
                PERFORM bdc_field USING : v_fnam 'X'.
                PERFORM bdc_field  USING 'BDC_OKCODE' '=LOES'.
                PERFORM bdc_dynpro USING 'SAPLSPO1'   '0200'.
                PERFORM bdc_field  USING 'BDC_OKCODE' '=YES'.
                PERFORM bdc_dynpro USING  'SAPLMEOR' '0205'.
                PERFORM bdc_field  USING 'BDC_OKCODE' '=BU'.
              ENDIF.
            ELSE.
    If the Combination of Old Records Vendor/PPL/Porg is same and Agreement/Item
    is different, if the FIX of the Existing one is X and also the FIX of the New one
    is X then deselect the FIX of the Old one, if the MRP of the Old one is 1 and also
    the MRP of the New one is 1 then delete the MRP of the Old one, if the FIX and MRP
    of the Old one is X,1 and if it is same for the new one also, then delete the FIX
    and MRP of the Old one and insert the new one also
              IF it_eord-lifnr = it_final-lifnr AND
                 it_eord-ekorg = it_final-ekorg AND
                 it_eord-reswk = it_final-reswk AND
                 it_eord-ebeln NE '' AND it_final-ebeln NE ''.
                IF it_eord-ebeln NE it_final-ebeln OR it_eord-ebelp NE it_final-ebelp.
                  IF it_eord-febel EQ 'X' OR it_eord-autet EQ '1'.
                    v_tabix = sy-tabix.
                    IF it_final-feskz = 'X' AND it_final-autet = '1'.
                   it_eord-febel = ''.
                   it_eord-autet = ''.
    *****Begin of Changes By Pavan   Ticket 648507            "D13K948908
                      IF s_vdatu GT it_eord-bdatu OR s_bdatu LT it_eord-vdatu.
                      ELSE.
    *****End of Changes By Pavan     Ticket 648507            "D13K948908
                        PERFORM bdc_dynpro USING  'SAPLMEOR' '0200'.
                        PERFORM bdc_field USING : 'EORD-MATNR' it_final-matnr,
                                         'EORD-WERKS' it_final-WERKS,
                                         'BDC_OKCODE' '/00'.
                        PERFORM bdc_dynpro USING  'SAPLMEOR' '0205'.
                        CONCATENATE 'RM06W-FESKZ(' v_tabix ')'  INTO v_fnam.
                        PERFORM bdc_field1 USING : v_fnam SPACE.
                        CONCATENATE 'EORD-AUTET(' v_tabix ')'  INTO v_fnam.
                        PERFORM bdc_field1 USING : v_fnam SPACE.
                        PERFORM bdc_field  USING 'BDC_OKCODE' '=BU'.
                      ENDIF.
                    ELSEIF
                     it_final-feskz = 'X'.
                   it_eord-febel = ''.
    *****Begin of Changes By Pavan   Ticket 648507            "D13K948908
                      IF s_vdatu GT it_eord-bdatu OR  s_bdatu LT it_eord-vdatu.
                      ELSE.
    *****End of Changes By Pavan     Ticket 648507            "D13K948908
                        PERFORM bdc_dynpro USING  'SAPLMEOR' '0200'.
                        PERFORM bdc_field USING : 'EORD-MATNR' it_final-matnr,
                                         'EORD-WERKS' it_final-WERKS,
                                         'BDC_OKCODE' '/00'.
                        PERFORM bdc_dynpro USING  'SAPLMEOR' '0205'.
                        CONCATENATE 'RM06W-FESKZ(' v_tabix ')'  INTO v_fnam.
                        PERFORM bdc_field1 USING : v_fnam SPACE.
                        PERFORM bdc_field  USING 'BDC_OKCODE' '=BU'.
                      ENDIF.
                    ELSEIF
                     it_final-autet = '1'.
                   it_eord-autet  = ''.
    *****Begin of Changes By Pavan   Ticket 648507            "D13K948908
                      IF s_vdatu GT it_eord-bdatu OR  s_bdatu LT it_eord-vdatu.
                      ELSE.
    *****End of Changes By Pavan     Ticket 648507            "D13K948908
                        PERFORM bdc_dynpro USING  'SAPLMEOR' '0200'.
                        PERFORM bdc_field USING : 'EORD-MATNR' it_final-matnr,
                                         'EORD-WERKS' it_final-WERKS,
                                         'BDC_OKCODE' '/00'.
                        PERFORM bdc_dynpro USING  'SAPLMEOR' '0205'.
                        CONCATENATE 'EORD-AUTET(' v_tabix ')'  INTO v_fnam.
                        PERFORM bdc_field1 USING : v_fnam SPACE.
                        PERFORM bdc_field  USING 'BDC_OKCODE' '=BU'.
                      ENDIF.
                    ENDIF.
                  ENDIF.
                ENDIF.
              ENDIF.
            ENDIF.
            CLEAR it_eord.
            IF NOT it_bdcdata[] IS INITIAL.
              CALL TRANSACTION 'ME01' USING it_bdcdata
                                      OPTIONS FROM it_ctu_params.
              REFRESH it_bdcdata[].
              EXIT.
            ENDIF.
          ENDLOOP.
        ENDIF.
          ENDIF.
        CLEAR : v_matnr, it_final.
      ENDLOOP.
      REFRESH : it_eord[].
      FREE it_eord.
    **Updating the Records of Upload File into ME01
      LOOP AT it_final INTO wa_final.
        it_final = wa_final.
        CLEAR v_matnr.
        TRANSLATE it_final-feskz TO UPPER CASE.
        TRANSLATE it_final-notkz TO UPPER CASE.
    *****Begin of Changes By Pavan   Ticket 648507            "D13K948908
        PERFORM plant_conversion USING wa_final-werks.
    *****End of Changes By Pavan     Ticket 648507            "D13K948908
    **To convert the Valid From and Valid To into User's Format
        CASE v_datfm.
          WHEN 1.
            CONCATENATE it_final-vdatu3(2) '.' it_final-vdatu0(2) '.' it_final-vdatu+6(4) INTO it_final-vdatu.
            CONCATENATE it_final-bdatu3(2) '.' it_final-bdatu0(2) '.' it_final-bdatu+6(4) INTO it_final-bdatu.
          WHEN 2.
            CONCATENATE it_final-vdatu0(2) '/' it_final-vdatu3(2) '/' it_final-vdatu+6(4) INTO it_final-vdatu.
            CONCATENATE it_final-bdatu0(2) '/' it_final-bdatu3(2) '/' it_final-bdatu+6(4) INTO it_final-bdatu.
          WHEN 3.
            CONCATENATE it_final-vdatu0(2) '-' it_final-vdatu3(2) '-' it_final-vdatu+6(4) INTO it_final-vdatu.
            CONCATENATE it_final-bdatu0(2) '-' it_final-bdatu3(2) '-' it_final-bdatu+6(4) INTO it_final-bdatu.
          WHEN 4.
            CONCATENATE it_final-vdatu6(4) '.' it_final-vdatu0(2) '.' it_final-vdatu+3(2) INTO it_final-vdatu.
            CONCATENATE it_final-bdatu6(4) '.' it_final-bdatu0(2) '.' it_final-bdatu+3(2) INTO it_final-bdatu.
          WHEN 5.
            CONCATENATE it_final-vdatu6(4) '/' it_final-vdatu0(2) '/' it_final-vdatu+3(2) INTO it_final-vdatu.
            CONCATENATE it_final-bdatu6(4) '/' it_final-bdatu0(2) '/' it_final-bdatu+3(2) INTO it_final-bdatu.
          WHEN 6.
            CONCATENATE it_final-vdatu6(4) '-' it_final-vdatu0(2) '-' it_final-vdatu+3(2) INTO it_final-vdatu.
            CONCATENATE it_final-bdatu6(4) '-' it_final-bdatu0(2) '-' it_final-bdatu+3(2) INTO it_final-bdatu.
    ***End of Changes by Pavan                       "D13K945062
          WHEN 'A'.
            CONCATENATE it_final-vdatu6(4) '/' it_final-vdatu3(2) '/' it_final-vdatu+0(2) INTO it_final-vdatu.
            CONCATENATE it_final-bdatu6(4) '.' it_final-bdatu3(2) '.' it_final-bdatu+0(2) INTO it_final-bdatu.
          WHEN 'B'.
            CONCATENATE it_final-vdatu6(4) '/' it_final-vdatu3(2) '/' it_final-vdatu+0(2) INTO it_final-vdatu.
            CONCATENATE it_final-bdatu6(4) '.' it_final-bdatu3(2) '.' it_final-bdatu+0(2) INTO it_final-bdatu.
          WHEN 'C'.
            CONCATENATE it_final-vdatu6(4) '/' it_final-vdatu3(2) '/' it_final-vdatu+0(2) INTO it_final-vdatu.
            CONCATENATE it_final-bdatu6(4) '.' it_final-bdatu3(2) '.' it_final-bdatu+0(2) INTO it_final-bdatu.
        ENDCASE.
          AT NEW werks.
        CLEAR s_count.
        REFRESH : it_bdcdata[], it_eord1[].
        PERFORM bdc_dynpro USING  'SAPLMEOR' '0200'.
        PERFORM bdc_field USING : 'EORD-MATNR' it_final-matnr,
                                  'EORD-WERKS' it_final-WERKS,
                                  'BDC_OKCODE' '/00'.
        PERFORM bdc_dynpro USING  'SAPLMEOR' '0205'.
    **Adding preceeding Zeroes to the Material No
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT  = it_final-matnr
          IMPORTING
            OUTPUT = v_matnr.
    **To know the Number of records in EORD after Updating with new records
        SELECT vdatu
               bdatu FROM EORD
                     INTO TABLE it_eord1
                     WHERE matnr = v_matnr
                       AND werks = it_final-werks.
        DESCRIBE TABLE it_eord1 LINES v_eord_row.
        s_count = v_eord_row + 1.
          ENDAT.
        CONCATENATE 'EORD-VDATU(' s_count ')'  INTO v_fnam.
        PERFORM bdc_field USING : v_fnam it_final-VDATU.
        CONCATENATE 'EORD-BDATU(' s_count ')'  INTO v_fnam.
        PERFORM bdc_field USING : v_fnam it_final-BDATU.
        CONCATENATE 'EORD-EKORG(' s_count ')'  INTO v_fnam.
        PERFORM bdc_field USING : v_fnam  it_final-EKORG.
        CONCATENATE 'EORD-LIFNR(' s_count ')'  INTO v_fnam.
        PERFORM bdc_field USING : v_fnam it_final-LIFNR.
        CONCATENATE 'EORD-RESWK(' s_count ')'  INTO v_fnam.
        PERFORM bdc_field USING : v_fnam it_final-RESWK.
        CONCATENATE 'EORD-EBELN(' s_count ')'  INTO v_fnam.
        PERFORM bdc_field USING : v_fnam it_final-EBELN.
        CONCATENATE 'EORD-EBELP(' s_count ')'  INTO v_fnam.
        PERFORM bdc_field USING : v_fnam it_final-EBELP.
        CONCATENATE 'RM06W-FESKZ(' s_count ')' INTO v_fnam.
        PERFORM bdc_field USING : v_fnam it_final-FESKZ.
        CONCATENATE 'EORD-NOTKZ(' s_count ')'  INTO v_fnam.
        PERFORM bdc_field USING : v_fnam it_final-NOTKZ.
        CONCATENATE 'EORD-AUTET(' s_count ')'  INTO v_fnam.
        PERFORM bdc_field USING : v_fnam it_final-AUTET.
         AT END OF werks.
        PERFORM bdc_field USING 'BDC_OKCODE' '=BU'.
        REFRESH it_messtab[].
        CALL TRANSACTION 'ME01' USING it_bdcdata
                                OPTIONS FROM it_ctu_params
                                    MODE 'A'
                                  UPDATE 'L'
                             MESSAGES INTO it_messtab.
        IF SY-SUBRC NE 0.
          it_err_rec-matnr = it_final-matnr.
          it_err_rec-werks = it_final-werks.
          it_err_rec-vdatu = it_final-vdatu.
          it_err_rec-bdatu = it_final-bdatu.
          it_err_rec-lifnr = it_final-lifnr.
          it_err_rec-ekorg = it_final-ekorg.
          it_err_rec-reswk = it_final-reswk.
          it_err_rec-ebeln = it_final-ebeln.
          it_err_rec-ebelp = it_final-ebelp.
          it_err_rec-feskz = it_final-feskz.
          it_err_rec-notkz = it_final-notkz.
          it_err_rec-autet = it_final-autet.
          APPEND it_err_rec.
          CLEAR it_err_rec.
          PERFORM format_message.
        ENDIF.
         ENDAT.
      ENDLOOP.
    **To Upload the Error Records into another Excel File
      IF NOT it_err_rec[] IS INITIAL.
        PERFORM errors_file.
        DESCRIBE TABLE it_err_rec LINES v_err_rec.
        v_errors = v_err_rec - 1.
      ELSE.
        v_errors = 0.
      ENDIF.
      v_updated = v_lines - v_errors.
      WRITE : /2 'RUN DATE    :' color COL_NORMAL, 20 sy-datum,
              /2 'RUN TIME    :' color COL_NORMAL, 20 sy-uzeit.
      SKIP 2.
      WRITE : /2 'FILE PATH   :' color COL_NORMAL, 20 p_fname.
      SKIP 2.
      WRITE : /2 'RESULTS' color COL_NORMAL.
      SKIP.
      WRITE : /2 'Number of Rows in the Upload File  :' color COL_NORMAL, v_lines,
              /2 'Number of Rows Updated             :' color COL_NORMAL, v_updated,
              /2 'Number of Error Records            :' color COL_NORMAL, v_errors.
      IF it_errmsg[] IS NOT INITIAL.
        SKIP 2.
        WRITE : /2 'Details of the Error Records' color COL_NORMAL.
        SKIP.
        ULINE.
        FORMAT COLOR COL_NORMAL.
        WRITE : /2 'Material',
                22 'Plant',
                28 'Valid From',
                40 'Valid To',
                52 'Vendor',
                64 'Porg',
                70 'PPL',
                76 'Agreement',
                88 'Item',
                94 'Fix',
                98 'Blk',
                102 'MRP',
                106 'Err. Description'.
        FORMAT COLOR OFF.
        ULINE.
        LOOP AT it_errmsg.
          AT NEW autet.
            WRITE : /2 it_errmsg-matnr,
                    22 it_errmsg-werks,
                    28 it_errmsg-vdatu,
                    40 it_errmsg-bdatu,
                    52 it_errmsg-lifnr,
                    64 it_errmsg-ekorg,
                    70 it_errmsg-reswk,
                    76 it_errmsg-ebeln,
                    88 it_errmsg-ebelp,
                    94 it_errmsg-feskz,
                    98 it_errmsg-notkz,
                    102 it_errmsg-autet.
          ENDAT.
          WRITE    106 it_errmsg-messg.
        ENDLOOP.
      ENDIF.
                     E N D   O F   S E L E C T I O N                     *
    END-OF-SELECTION.
    *&      Form  file_get
          Selects the File Name and Path
    FORM file_get .
      CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
        EXPORTING
          PROGRAM_NAME  = v_repid
          DYNPRO_NUMBER = SYST-DYNNR
          FIELD_NAME    = p_fname
        CHANGING
          FILE_NAME     = p_fname
        EXCEPTIONS
          MASK_TOO_LONG = 1
          OTHERS        = 2.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " file_get
    *&      Form  upload_xcel
          Uploading data to an Internal Table
    FORM upload_xcel .
      DATA: BEGIN OF it_intern OCCURS 0.
              INCLUDE STRUCTURE ALSMEX_TABLINE. " Rows for Table with Excel Data
      DATA: END OF it_intern.
      DATA v_no_rows  TYPE i VALUE 9999.
      FIELD-SYMBOLS : <fs1>.
      CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
        EXPORTING
          FILENAME                = P_FNAME
          I_BEGIN_COL             = c_1
          I_BEGIN_ROW             = c_1
          I_END_COL               = c_12
          I_END_ROW               = v_no_rows
        TABLES
          INTERN                  = it_intern
        EXCEPTIONS
          INCONSISTENT_PARAMETERS = 1
          UPLOAD_OLE              = 2
          OTHERS                  = 3.
      IF SY-SUBRC NE 0.
        MESSAGE text-016 TYPE 'I'.
      ENDIF.
      LOOP AT it_intern.
        ASSIGN COMPONENT it_intern-col OF STRUCTURE
        it_final TO <fs1>.
        IF sy-subrc NE 0.
          EXIT.
        ENDIF.
        <fs1> = it_intern-value.
        AT END OF row.
          APPEND it_final.
          CLEAR  it_final.
        ENDAT.
      Endloop.
      FREE it_intern.
    ***To Delete the Headings from the Internal Table.
      DELETE it_final WHERE matnr CA 'MATmat'.
    ENDFORM.                    " upload_xcel
    *&      Form  bdc_dynpro
          Populate Screen Name
    FORM bdc_dynpro  USING    PROGRAM
                              DYNPRO.
      CLEAR it_bdcdata.
      it_bdcdata-PROGRAM  = PROGRAM.
      it_bdcdata-DYNPRO   = DYNPRO.
      it_bdcdata-DYNBEGIN = 'X'.
      APPEND it_bdcdata.
    ENDFORM.                    " bdc_dynpro
    *&      Form  bdc_field
         Populate Screen Field
    FORM bdc_field  USING    FNAM
                             FVAL.
      IF FVAL <> SPACE.
        CLEAR it_bdcdata.
        it_bdcdata-FNAM = FNAM.
        it_bdcdata-FVAL = FVAL.
        APPEND it_bdcdata.
      ENDIF.
    ENDFORM.                    " bdc_field
    *&      Form  bdc_field
         Populate Screen Field
    FORM bdc_field1   USING   FNAM
                             FVAL.
      CLEAR it_bdcdata.
      it_bdcdata-FNAM = FNAM.
      it_bdcdata-FVAL = FVAL.
      APPEND it_bdcdata.
    ENDFORM.                    " bdc_field
    *&      Form  errors_file
          Downloads the Error Records
    FORM errors_file .
      DATA : l_fname  TYPE string,
             l_var1   TYPE string,
             l_var2   TYPE string.
      l_fname = p_fname.
      SPLIT l_fname at '.' into l_var1 l_var2.
      CONCATENATE l_var1 '_error.' l_var2 INTO l_fname.
    **To Write the Headings in the Excel File
      it_err_rec-matnr = text-003.
      it_err_rec-werks = text-004.
      it_err_rec-vdatu = text-005.
      it_err_rec-bdatu = text-006.
      it_err_rec-lifnr = text-007.
      it_err_rec-ekorg = text-008.
      it_err_rec-reswk = text-009.
      it_err_rec-ebeln = text-010.
      it_err_rec-ebelp = text-011.
      it_err_rec-feskz = text-012.
      it_err_rec-notkz = text-013.
      it_err_rec-autet = text-014.
      INSERT it_err_rec INDEX 1.
      CLEAR it_err_rec.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          FILENAME                = l_fname
          FILETYPE                = 'DAT'
         APPEND                  = ' '
         CONFIRM_OVERWRITE       = ' '
        TABLES
          DATA_TAB                = it_err_rec
        EXCEPTIONS
          FILE_WRITE_ERROR        = 1
          NO_BATCH                = 2
          GUI_REFUSE_FILETRANSFER = 3
          INVALID_TYPE            = 4
          NO_AUTHORITY            = 5
          UNKNOWN_ERROR           = 6
          HEADER_NOT_ALLOWED      = 7
          SEPARATOR_NOT_ALLOWED   = 8
          FILESIZE_NOT_ALLOWED    = 9
          HEADER_TOO_LONG         = 10
          DP_ERROR_CREATE         = 11
          DP_ERROR_SEND           = 12
          DP_ERROR_WRITE          = 13
          UNKNOWN_DP_ERROR        = 14
          ACCESS_DENIED           = 15
          DP_OUT_OF_MEMORY        = 16
          DISK_FULL               = 17
          DP_TIMEOUT              = 18
          FILE_NOT_FOUND          = 19
          DATAPROVIDER_EXCEPTION  = 20
          CONTROL_FLUSH_ERROR     = 21
          OTHERS                  = 22.
      IF SY-SUBRC EQ 0.
        MESSAGE text-015 TYPE 'S'.
      ENDIF.
    ENDFORM.                    " errors_file
    *&      Form  format_message
          To Write the Error Records
    FORM format_message .
      IF NOT it_messtab[] IS INITIAl.
        LOOP AT it_messtab.
          IF it_messtab-msgtyp = 'E'.
            CALL FUNCTION 'FORMAT_MESSAGE'
              EXPORTING
                ID        = it_messtab-msgid
                LANG      = sy-langu
                NO        = it_messtab-msgnr
                V1        = it_messtab-msgv1
                V2        = it_messtab-msgv2
                V3        = it_messtab-msgv3
                V4        = it_messtab-msgv4
              IMPORTING
                MSG       = v_message
              EXCEPTIONS
                NOT_FOUND = 1
                OTHERS    = 2.
            IF SY-SUBRC EQ 0.
              it_errmsg-matnr = it_final-matnr.
              it_errmsg-werks = it_final-werks.
              it_errmsg-vdatu = it_final-vdatu.
              it_errmsg-bdatu = it_final-bdatu.
              it_errmsg-ekorg = it_final-ekorg.
              it_errmsg-lifnr = it_final-lifnr.
              it_errmsg-reswk = it_final-reswk.
              it_errmsg-ebeln = it_final-ebeln.
              it_errmsg-ebelp = it_final-ebelp.
              it_errmsg-feskz = it_final-feskz.
              it_errmsg-notkz = it_final-notkz.
              it_errmsg-autet = it_final-autet.
              it_errmsg-messg = v_message.
              APPEND it_errmsg.
              CLEAR : it_errmsg, v_message.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    " format_message
    *&      Form  plant_conversion
         Adding preceeding Zeroes
         -->P_IT_FINAL_WERKS  text
    FORM plant_conversion  USING    P_VAR.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT  = P_VAR
          IMPORTING
            OUTPUT = P_VAR.
    ENDFORM.                    " plant_conversion
    Hope it helps!!!
    Regards,
    Pavan

  • [svn] 1723: Updating the team app with send/subscribe samples.

    Revision: 1723
    Author: [email protected]
    Date: 2008-05-14 15:26:30 -0700 (Wed, 14 May 2008)
    Log Message:
    Updating the team app with send/subscribe samples.
    Modified Paths:
    blazeds/branches/3.0.x/apps/team/WEB-INF/flex/messaging-config.xml
    blazeds/branches/3.0.x/apps/team/features/messaging/sendsubscribeconstraint/messaging_AMF _Poll_SendSubscribeConstraint.mxml
    blazeds/branches/3.0.x/apps/team/features/messaging/sendsubscribeconstraint/messaging_HTT P_Poll_SendSubscribeConstraint.mxml
    Added Paths:
    blazeds/branches/3.0.x/apps/team/features/messaging/sendsubscribeconstraint/messaging_AMF _LongPoll_SendSubscribeConstraint.mxml
    blazeds/branches/3.0.x/apps/team/features/messaging/sendsubscribeconstraint/messaging_AMF _Stream_SendSubscribeConstraint.mxml

    Hi Pratibha,
    Thank you for posting in MSND forum.
    Since
    this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
    Based
    on your issue, since it is related to the Deployment Framework for Biztalk (BTDF), so I suggest you could consult this issue directly to this Deployment Framework for Biztalk (BTDF) website:
    https://biztalkdeployment.codeplex.com/discussions , you will get better support.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Server folder with lots of files hangs Finder and Terminal

    I work remotely from home, and connect to my company's PC network using VPN software and Finder's Go -> Connect to Server...
    Pre-Tiger, this worked fine. I could browse remote folders in the Finder, no matter how many files and other folders were contained in these folders...
    Ever since I loaded Tiger, when I connect to a server and navigate to a folder with "lots of" files (I don't know what the number is, but I do know that one of the folders that is a problem for me has 130 folders in it), the Finder hangs up and has to be relaunched...
    The same goes if I open a Terminal window and "cd" to the same directory... if I do an "ls", it hangs.
    I repeat, I never had this problem pre-Tiger, and the folders have not grown in size.
    Please help?
    Thank you!

    I think I solved it!!! After trying all sorts of copying from backups etc.... with no good result, I resorted to Cocktail and used the function in the second page called... System, under the Tab called Database 'Rebuild launch services database', though don't tick the box.
    This fixed things for me!! Hope it works for you too.

  • I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)

    I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)

    You would need the original installation disks or files for the Adobe software to get it onto your iMac, and having it on two computers may not be allowed by your university's licensing. Talk to whoever issued the MacBook.
    As to the music, just copy it over to the MacBook, either via Home Sharing, file sharing, or an external storage medium (hard drive, USB flash drive, etc.).
    Regards.

  • Can't Open Project Recovered With Data Rescue

    Hi All,
    Stupid me, I trashed a project file and emptied the Trash. I had forgotten that a FCP sequence was referencing the DV files contained in that project package. I had no backup of the DV files (please, no preaching - I learned my lesson).
    I was able to recover the project file with ProSoft's Data Rescue, but here's the rub:
    The original project was created with an earlier version of iMovie, and was reconverted later with iMovie 6 HD in the same folder. Data Rescue does not seem to recognize that it is a package type of file, thus option-clicking does not list Open Package Contents as an option. Double clicking the recovered project file results in iMovie 6 HD trying to convert the file from the older format, but since the package contents don't seem to be available, or arranged correctly, errors occur.
    iMovie 6 seems to know the names of the clips, but can't import them from the older format. I am certain the clips are there (there's only 2), given the project size is 17 GB, which looks about right. Thus I feel certain the clips are in there somewhere.
    Unfortunately, I no longer have the iMovie version that was used in the initial creation of the project. not that that would help anyway. Is there some way to recover the clips?

    Nevermind, the Thorough Search option in Data Rescue found the files I thought were gone for good .

Maybe you are looking for