'Project Cycle' tab is missing ...

Hi,
In t_code solar_project_admin I go to the 'System Landscape' tab, and then the 'Project Cycle' tab is missing ... exist only : Systems , Central Objects and IMG Projects tab.
Can any one of you help me in this regard.
Thanks
Venu Madhav

I had the same problem. Actually Jason is right, it's called "Change Requests" now. If you don't see that tab as well, go to SPRO --> SAP Solution Manager Implementation Guide --> SAP Solution Manager --> Configuration --> Scenario-Specific Settings --> Change Request Management --> Standard Configuration --> General Activities --> Activate Integration with Change Request Management:
1.) "Activate Change Request Management and Set-Up Client" --> set your CHARM client
2.) "Integration Solution Manager" --> Enter application S (Change Request Management) and destination NONE
--> IMG documentation says something it's not required nevertheless this entry must be maintained
3.) "Integration Change Request Management" --> enter
Appl                         +              Dest          +              +
CHARM                     W     NONE     CUST620     1.0
CHARM_DEST     W     NONE     CUST620     1.0
--> not documentated properly in the IMG documentation as well
For me, is was especially 2.). After I made that entry, I had the tab "Change Requests" ... and new problems ...
Cheers,
Andy

Similar Messages

  • Project Cycle aba is missing..

    Dear Gurus..
    In t_code solar_project_admin I go to the 'System Landscape' tab, and then the 'Project Cycle' tab is missing ... exist only : Systems , Central Objects and IMG Projects tab.,..
    My solman is in ST 12 level..
    Thank you for clarifications..
    Claudenir

    Dear Sankara,
    Please open a new thread for rewards points..
    I will reponse quickly
    Thank you.

  • Project Cycle Tab

    Hi Friends
    I couldn't find the Project cycle Tab under the system landscape in SOLAR_PROJECT_ADMIN T.code. Please guide me.
    Regards
    Kumar

    Hello Somya,
    In spro->Activate Integration with Change Request Management point
    ensure that in Integration Solution Manager activity you have entered the entry:
    Appl.   RFC Destination
    S Change Request Management NONE
    I activity Integration Change Request Management you have to haver this entries:
    OSS_MSG     W     NONE     CUST620     1.0
    CHARM                    W     NONE     CUST620     1.0
    This settings will do that you see the Change Request tab.
    Hope this helps,
    Dolores

  • Can not Create a Maintanence Project Cycle

    Hi,
    We are using ChaRM 4.0 , in project cycle tab in solar_project_admin transaction . when i click on the refresh button, it gives some warning error . see the following
    Warning: Problems occurred during synchronizati
    of the system landscape
    when we see the log in SLG1 transaction it is having the following log .
    @5C\QError@     /TMWFLOW/CHECK_PRJ_CONSISTENCY : PRODUCTIVE CTS PROJECT DEFINED ZCHARM4
    what will be the problem ? can any one guide ?

    Thanks,
    There was one more question I had: "Did you verify the drive with Disk Utility and did it get the "all clear"?"
    Edit: here an Apple article (although archived):
    http://support.apple.com/kb/ht2414
    Launch DiskUtility (in the /Applications/Utilities/ folder) and select the whole disk (not the volume  Macintosh HD, but the one above with the disk identifier as name).  Then click on "verify disk".
    Then do the same with "Macintosh HD" selected.
    If both verifications are passed, i.e. they "appear to be ok", also check the SMART status of your disk.  The trial version of Smart Utility will do that (better than Disk Utility).
    If all these checks are passed and if you have an external drive to clone your Macintosh HD to, I'd do that, re-partition the internal drive to 1 Partition, re-install Mavericks with the full installer and run Bootcamp Assistant to partition for Bootcamp.  Then clone back "Macintosh HD".
    Oh, one more question: how big are you trying to make the bootcamp partition?

  • BI Content Tab goes missing in between the Project

    Hi Experts,
    I have been finding a very strange behaviour in the BI 7 System of late. The BI Content tab has gone missing suddenly and its been more than a week till now. We have been installing and activating BI Objects regularly and suddenly one day its gone blank. I am a Tech Manager and was surprised when my consultant told me that BI Content tab is missing. I wanted to check if anyone else has faced this problem and if so whats the way out. Pls also let me know what are the reasons behind this so as to not repeat these mistakes in future. Would appreciate an immediate response - Swami.

    Swami,
    This is surprising.
    Check, whether you are able to access BI content from menu (RSA1->Goto-> Install BI Content)
    Adjust the screen resolution and check whether the BI content tab is hidden.
    Also check in tcode : RSORBCT.
    Ravi

  • Multiple Change Requests for project cycle

    I have a question.. if we have multiple chane requests/documents for a project cycle , how will the project cycle proceed??
    i have two CRs for my implementation cycle , now how should i proceed my implementation cycle, since all the changes are of type SDMJ and i want all my changes to be imported to PRD together??
    Please help

    Hello,
    i had the same problem few weeks ago. I couldn't find the Change request Tab in Solar_project_admin
    I fixed it by following : SAP note : 802793
    The note explain how to re assign the client to manage change request management.
    We folow the note, then the missing tab appear
    Regards

  • Effects Tab is missing

    Hello,
    In working on a project, I just realized that all of a sudden, my Effects tab is missing. I did click on the Window pull-down menu, and saw that 'Effects' is not checked - I tried doing so, and it actually opened it up a separate window, and it is still unchecked in the pull-down menu. I tried dragging the Effects window, so that it would line up where it's supposed to be, but, no such luck. I have no idea how this just disappeared like this - can anyone tell me how I can get it back to where it was? Thanks so much!

    Well, that was certainly easy enough, thank you! I may be asking too much, but, when I try to drag the tab over to the right of my project tab, but, dragging it now doesn't seem to work... It's just that I'm used to it being over on the right-hand side, instead of the left - ok, thanks again!

  • RH7: Project Manager Tab keeps refreshing continuously

    I have upgraded my project from RH5 to RH7. There were in all 65 projects (.xpj) files that I upgraded. However, i have this issue with some of the files. When I open the xpj file, the Project Manager tab keeps refreshing. I cant scroll and select the files that are towards the end because the moment I click the scroll bar, the the tab refreshes and I cant click on the file.
    Most of the files that I upgraded work fine.
    Please suggest a solution. Thanks.

    Have you tried renaming the CPD and reopening RH to make it create a new one?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Excise TAB is missing in MIGO

    I had captured vendor excise invoice against PO in J1IEX
    Later while doing GR, I had selected Refer excise invoice by drilldown.The excise value flows correctly which were captured before.
    When i had posted GR & trying to see display of GR ,Excise tab is missing there.
    It creates problem because while rejecting the material against that particular GR we don't understand while excise is captured against this or not...
    What will be solution for it.
    Process flow
    J1IEX-Capture excise invoice against PO.& then MIGO
    Regards,

    Hi,
    As per the process you have mentioned I understand that you have completed the Excise capture using J1IEX & Part 1 using MIGO where you have referred the captured excise invoice.
    Now post the excise invoice using J1IEX & then check your Material document using MIGO transaction whether excise invoice getting displayed.
    I hope this is the way we process an excise invoice in a 3 step method (Capture-Refer(Part 1)-Post).
    Hope its clear.
    Regards,

  • The New Tab button on the right side of the last tab is missing.How do I get it back?

    The New Tab button on the right side of the last tab is missing on the Tab bar How do I get it back?

    For now, you can try using Ctrl + t to open new tabs if you can't open them otherwise, but try right clicking the tabs bar, clicking "customize," and then in the window that comes up try clicking the "restore default set" button. I don't know if it will work in your case but it wouldn't hurt to try.

  • Content Administration Tab is missing for administrator user in  NW CE 7.1

    we have a issue after upgrading the portal to NW CE 7.1 SP00 RTC.
    "Content Administration" Tab is missing for administrator users

    In CE version, we have to manually enable by using "Content Layer Tool"
                  http://<host>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.portal.content.layers.ContentLayersTool
    This link may lead to "Portal Runtime Error" because "contentLayerTool" is port of high_safety zone
    To access without runtime error, pls follow the below process.
    1. login http://<host>:<port>/irj with admin user
    2. concatenate the below line to browser
        /servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.portal.content.layers.ContentLayersTool
    3. To enable content admin tab click "Activate Development Mode"

  • The x mark at the right corner of each tab is missing in my ff4.1. I have to right click the tab and then choose the close tab from the drop down? Is this a bug or am i missing something

    I am using FF4.1 and the x mark on the right side of each tab is missing
    Addons i have installed are
    ABP
    Download helper
    Firebug
    Forecast Weather
    Ghostery
    Live Http Headers
    Save as PDF
    Test Pilot

    I think we can eliminate the graphics card as a suspect (and therefore its driver).   I just re-connected my monitor using the internal graphics processor. The Intel 4600.  Not fantastic but actually has better features than the card I had hooked up before. (I might as well stay with this for now. It's an HDMI hook up.)
    The problem is still there.
      This gets more curious all the time.  At this point It would seem that the the likelihood of this being a bug is more or less zero, as myself and one other individual are the only ones reporting it.
    So, I'm thinking it has to be a flawed install. Maybe some line/lines of code are corrupt, if that can happen while still maintaining the rest of the programs integrity.
    Any other thoughts anyone?
    Derek.

  • Tones section not working in itunes library and tones tab is missing in i phone ...

    1st issue
    On mac OS 10.9.2
    tones tab is missing in the i phone tab bar
    2nd issue
    and also ringtones are not getting added to itunes library 11.1.5
    i created AAC version file and changed the extension m4r version file and created Tones folder in itunesmedia still cant see in the tones section.
    These files are getting added to music section but not tones section.. WHY...
    Please Help...

    Apologies, it appears I have posted this in the incorrect category. I have posted a duplicate under iTunes for Mac. Unfortunately i have no idea how to remove my original post.
    Robert

  • For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help

    For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help

    Right-click (Mac Cmd-click) on another panel header such as "Tone Curve". Make sure there is a checkmark for Basic as was all other panel sections that you want displayed.

  • Workload Analysis tab is missing  in E2E Anaysis

    Hi Guru,
    I am in process of generating EWA reports for portal ,below are the steps I have completed successfully.
    1. SMD agent installation on portal.
    2. Defined portal system in SMSY.
    3. completed SOLMAN_SETUP.
    4. Completed Setup Wizard for managed system.
    5. Deploy IS agent via SDM in Solman.
    6. Introscope agent setup done for managed system
    7. Managed system data is visible in IS Enterprise Manager.
    When I checked t code solman_workcenter->RCAtab-> E2E Anaysis->selected  the portal system i cant find Workload Analysis tab i.e Workload Analysis tab is missing could you please help me to resolve this issue.
    System Configuratoi: SAP EHP 1 for SAP Solution Manager 7.0 and portal is netweaver 7.0
    Thanks
    Abullais

    Hi,
    Kindly check security guide for RCA authorization,
    https://websmp102.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000718044&_SCENARIO=01100035870000000202
    It may be due to authorization issue.
    Regards,
    Karthik

Maybe you are looking for