Project depend on radio control helicopter and aeroplanes

hello,
My name is Ankit sharma and i am computer science engineering student i want to make a project which is related from radio control helicopter and planes it is for security the hidden camera would be in the plane and helicopter it would work together with radio control device but i think in the lake of battery current of plane and helicopter the software will work in the plane and helicopter which give the instruction to the plane and helicopter for back to the decided area these all are for take the pics of the selected area for security in the complex circumstances like problem in engine it has one parashoot for better landing without any hardware loss it should be able to back to the airport with collected information please give me the suggetions for complete this project perfectly and it should be able to fall any small thing in the air. help me. I am waiting for your reply.

Ankitbill wrote:
hello,
My name is Ankit sharma and i am computer science engineering student i want to make a project which is related from radio control helicopter and planes it is for security the hidden camera would be in the plane and helicopter it would work together with radio control device but i think in the lake of battery current of plane and helicopter the software will work in the plane and helicopter which give the instruction to the plane and helicopter for back to the decided area these all are for take the pics of the selected area for security in the complex circumstances like problem in engine it has one parashoot for better landing without any hardware loss it should be able to back to the airport with collected information please give me the suggetions for complete this project perfectly and it should be able to fall any small thing in the air. help me. I am waiting for your reply.Next go-around, consider buying some extra periods. They're not that expensive if purchased in bulk. Commas are even cheaper.

Similar Messages

When using podcast i switch to radio-canada live and it start to stop and restart it and voice control start and stop by it self

When i listen music on my iphone 4 using podcast (training session workout) i switched to radio-canada live and after a while it start to stop and start radio-canada live and voice control stop and start by itself???

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

I want to do a project in Labview which controls 5 light bulbs which lights in a room.

I want to do a project in Labview which controls 5 light bulbs which lights in a room. The switching on of light bulbs depend on amount of sunlight falling on a LDR. Small intensity of sunlight should cause the lighting of one bulb after the other. I need some help in writing my program in Labview.

kasamaneka wrote:
I want to do a project in Labview which controls 5 light bulbs which lights in a room. The switching on of light bulbs depend on amount of sunlight falling on a LDR. Small intensity of sunlight should cause the lighting of one bulb after the other. I need some help in writing my program in Labview.
LDR is a resistor whose resistance decreases with increasing incident light intensity... I know, you are already aware of what LDR is...!!
--> Well what exactly you want a LabVIEW program to do in this setup of yours...??
--> If you want LabVIEW to take control and lit different bulbs, based on the light intensity, I would like to know, how exactly you planned to measure the resistance variation of LDR??
--> What DAQ are you using??
--> Are you aware that DAQ cards can measure the voltage across a shunt resistance (here LDR) and indirectly tell you the variation in the resistant, provided a constant current passing through the resistance.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Game with radio control transmitter?

I fly radio controlled model aircraft and in the PC/Windows environment model plane flight sims are available. Three questions:
1. Has anybody found a MODEL AEROPLANE flight sim to run on a Mac?
2. Has anyone tried connecting an R/C transmitter to a Mac to use as a gaming input device?
3. A USB cable is available but would it work without software?
Many thanks
Flying Macuser
G5 Mac OS X (10.4.6)

X-Plane is a very realistic flying simulator and it takes a huge amount of processing & video power to run it.
I fly RC Helo's.
This will sound silly, but I've found the PlayStation2 game called RC Copter to be very surprisingly similar to flying an RC Helo.
You didn't say if you were flying Planes of Helo's.

Visarc generates dirty project using SVN source control

Hi,
I've read in different topics some issues related to the visarc file, but unfortunately, none of them helped me out. I was wondering if any of you came across this issue and found a solution or workaround to it.
The problem relates to a LabVIEW project which opens dirty, as you commonly say, under some circunstances. Below I will explain some of the problems I encountered as I tried to track this problem down.
1. I'm running a large LabVIEW Run-Time project using a PXI with several FPGA - cRIO.
2. I found that when opening the project file, this is perfectly clean and no asterisk shows in the title bar. I close the project and no saving is needed.
3. I open the project again and I open a sub-VI which contains the following code:
4. Straight away, the file visarc shows up under the Dependencies tree of the Real-Time PXI and the asterisk shows now on the title bar of the project (not the VI).
5. The VI closes without needed to be saved but the project says that an item was added, removed and added, and it has to be saved (as soon as I close the subVI above, the visarc file dissapears from the Dependencies section).
6. What I do next is to add this file visarc (located in Program Files\National Instruments\LabVIEW 2012\resource) to the project under the PXI tree. I then save the project and close it.
7. I open the project again, and it keeps being clean (not dirty, as you say).
8. I open the same sub-vi than before and everything keeps being clean and no saving is needed neither on the sub-VI nor the project. Everything goes smooth in my local computer from now on.
However, the issue that I can not resolve follows:
9. We are two people working on this project, and we're using SVN as source version control. Everything works fine in my computer, but when my partner update the files on his computer, the project opens dirty as soon as it opens (only the project, the sub-VI is no needed to be saved).
10. My partner just save the project and close it, and it becomes clean straight away in his computer. The files which are saved are the aliases file (I expected that), the labview project file, and the LVLPS File of the project.
This issue will happen again as soon as any of us downloads the SW committed by the other.
I hope any of you can help me out with this issue. Any suggestion or idea are welcome.
Thank you very much in advanced.
Best regards,
danidpr

As far as I know, the resource manager does not support version control. If you map the version control folder to a local folder, you can use that in RoboHelp. But I'm afraid that any changes in the resource manager files will require you to manually check them out first. This is how I'm doing it anyway.
Kind regards,
Willam

Radio Buttons, Coldfusion and HTML

Hello.
I want to use 4 radio buttons. Each one has a different $
amount. The user chooses a radio button ($ amount) and then clicks
on the PayPal donation button which sends the user to the PayPal
payment page with the correct $ amount chosen.
The HTML code for the PayPal link allows me to use the
following code:
<input type="hidden" name="amount"
value="<cfoutput>#MoneyAmount#</cfoutput>">
I just have to figure out how to get the MoneyAmount chosen
by the user depending on which radio button is chosen.
I do not want to put the radio button into another form
because as I understand it the user would have to click another
submit button first via cfform. That defeats the purpose. Any way
to find out which button is chosen with out using the submit
button?
If you are confused at what I am talking about, check out
this website that has what I want:
http://www.licadho.org/donation.php
They do it with Javascript but I am sure I can do it in
ColdFusion.
Any ideas.
I appreciate the help.
Pedro

They appear to do it with a simple form, not javascript.
Plus, they have radio buttons on the form. What exactly are you
having difficutly with?

Why does Project 2010 Pro crash on cut and paste operation, among many other problems?

I guess my question has more to do with this: I'm trying to find a hotfix, patch or update for this. Can you advise?
Thanks,
Aldo

Hi, Mike,
Thank you for your very informative reply. Please accept the comments below in the interest of understanding the problem a little better. I will read your articles and comment on them, if applicable.
What I think you are suggesting is basically for me to provide more information. Perhaps you could advise on how my concern could best be addressed. It's a simple matter of copying and pasting lines until it crashes, which I can't understand why I would
want to avoid, particularly when the actions of the interface clearly support it. So, from a UI design perspective I have to ask, if this is a valid task for an Excel spreadsheet why is it not for a Project spreadsheet?
Please bear in mind that the issue here is not related to the effective use of the product, but quite plainly why doesn't this stuff work out of the box on a simple paste operation?
By "Adding", in my previous comments, I mean go to the "Project" ribbon, and select the "Subproject" button. Following is a very detailed set of steps.
1. Open Microsoft Project 2010 Professional, in either 64 bit or 32 bit mode.
2. About Microsoft Project displays (14.0.4751.1000) MSO (14.0.4760.1000), by going to the quick access tool bar, selecting "Customize quick access tool bar", selecting "More commands", selecting from the pull-down "Choose commands
from" the option "All commands", and then the "About" option in the list view right below it. Press the "Add" button in the middle of the form. Press the OK button. You will see the about button on the quick access bar. Press
the button to see what version of the software this is. If you need additional information to help troubleshoot the issue, please let me know.
3. On the currently open default blank project, first save the project by pressing the save button on the quick access tool bar. I've named this file "Project1.mpp", and the physical file location is the Documents folder on Windows 7. The task
name becomes "Task 1". I then click outside the row.
4. Select the entire row by clicking on the number column to the left of the spreadsheet. Press the "C" key while holding down the "Control" key. Now select the next row and press the "V" key, while holding down the "Control"
key. Do it again if it makes you feel better.
5. Press Ctrl-S to save. Now close the project by clicking on the "File" menu and selecting the close button.
6. Create a new Project file, by selecting "File", then "New", then "Blank project", then "Create". Repeat steps 3 through 5 but this time name the project "Project2.mpp"
7. Click on an empty row on the spreadsheet. This will serve as the placement location of the sub-project. Click on the project tab, Click on the "Subproject" button on the left of the ribbon and select Project1.mpp. Your original Project1
will appear as a sub-project. Select a row in this subproject and copy and paste this row onto the previous project. Everything should work fine and your rows should paste.
8. Now try pasting onto the same subproject on the row below. The application crashes.
Thanks again for your reply,
Aldo

CLD, +MATLAB/SIMULINK/C/C++/VB/ETC, Control systems and robotics, M.Sc., happy to gain worldwide experience, located in Canada

Hi,
My name is Morteza Heydari Araghi. I am a Mechatronics Engineer (studied Electrical Engineering during BS and MS, but also worked on Mechanical and Mechatronics projects), and am currently looking for a job that matches my skills. I am willing, and actually happier to relocate, and gain worldwide experience. I would prefer Canada, the US and europe, however I would need a work permit if anywhere outside Canada. I am a self-motivated and focused engineer who sets his goals and works very well in a team to achieve them. Some highlights of my qualifications include:
Studied Control Systems and robotics for 8 years.
Certified LabVIEW Developer. Used LabVIEW for about 6 years.
Worked with NI vision builder for machine vision applications.
Designed several machine vision systems for industrial purposes
Worked with real-time and/or embedded systems for more than 5 years.
Worked with some professional programming software packages, including C/C++ language, VB, MATLAB, NI LabView, SolidWorks, etc.
Worked with actuation and measuring systems in the sense of design, automation, instrumentation, and robotic applications.
Finding innovative solutions for highly competitive studies. Sharp in understanding new concepts.
Should you like to discuss further, please contact me at mheydari at alumni.uwo.ca
Best wishes,
Morteza

Respected sir/madam,
i am surendra babu.now i am looking for a job
and i have one year experience in LABVIEW.
Herewith i have attach my resume.Please take a look.
if u find any openings on LABVIEW please forward my resume.
Thanks & Regards,
Surendra babu Pidikiti
Attachments:
RESUME-SURENDRA.doc.docx ‏42 KB

I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160 when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt

I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160 when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt sizes how do I make the layers and tool bars bigger? Please help@

Windows will scale applications display or windows will not scale application display depending on how the application is coded. Photoshop is coded in a way that its display is not scaled by windows. Photoshop knows about your displays high pixel count not its resolution so it uses its pixels however it does not scale its UI to make it usable on your display. Other application let Windows scale their display output.   For example Microsoft default for is Surface Pro 3, 216 ppi display is to scale applications display up 150% so the surface pro 3 display which has 2160x1440 pixels a 216 ppi resolution look like at display with the user is using with 1440x960 pixels. The Application works like the display is 1440x960 and Windows scale those pixels to the displays using the displays 2160x1440 pixels the effectively changing it resolution to 144ppi rather than the actual 216ppi.
The reg update and external manifest file effectively tells photoshop its working on such a size display display some number of pixel wide and some number photoshop uses that as the display size in turn Windows scale those pixels to use the displays 2160x1440 pixels efector lowing its 216ppi resolution. Photoshop CC 2014 2X UI would be like using windows 200% option applications would be shown the are working on a display 1080x720 instead of the Surface Pro 3 2160x1440. Note that 1080x720 does not meet PS requirement of 1024x768. Photoshop UI would not fit on the Surface Pro 3 display..
Since you have a 4k display if you have CC 2014 you can use its 2x UI effectively Photoshop will be running on a 1920x1080 display and have half the resolution of you 4K display 3840x2160 pixels four native pixels are use as a single pixel.   1920x1080 pixels exceed PS requirement.

JDeveloper project dependency

I have noticed a bug in JDeveloper that is stopping me from creating a war with an ejb client jar file. Within the ejb project I have created a deployment profile for the client that includes only the shared classes such as interfaces and models. This successfully deploys to a jar. Within the war project I add a dependency on the ejb project client deployment jar file. The issue is the classes within the jar are not available within the classpath and the war will not compile.
If I change the war project dependency to be at the project level of the ear I can compile the java code. In order to correct the war deployment to include the ejb client jar I remove the project dependencies from the WEB-INF/classes. I then add the ejb client jar within the profile dependencies. Unfortunately the ejb client jar is not included within the WEB-INF/lib directory of the war.
Does anyone know how to correct this or is there a workaround?
Regards
Neil

I worked this out. The ejb client jar must be included within the 'libraries and classpath' as well as the dependencies. This is different from the 10g JDeveloper where you did not need to add the jar within the 'libraries and classpath'.
Regards
Neil
Edited by: Neil Anderson on Jul 31, 2009 4:07 PM

Error when trying to add a project to Subversion source control

When trying to add a project to source control from within the OPM 10 studio (File - Source Control - Add Project to Source Control), the following error occurs:
"There was a problem accessing the source control system, probably due to network or contention issues. A retry is recommended."
This has been tried with Subversion versions 1.6.2, 1.6.5 and 1.6.6, with local repositories and repositories on a Apache webserver.
Once the project has been added to a repository, by using TortoiseSVN for example, working with source control is no problem.
Does anyone have a clue what the problem (and a solution) might be?
Thanks,
Theo.

Hi,
Davin mentioned:
This appears to be an issue with the source control integration. We are looking into it.I am using OPM 10.0.1.14
The OPM help on collaborating mentions:
Open a rulebase project from source control
To open an existing Oracle Policy Modeling project from a source control repository:
In Oracle Policy Modeling, select File | Source Control | Open Existing Project from Source Control. When I open the File menu I do not see the "Source Control" at all.
Is this caused by an installation error or part of the "issue with the source control integration" ?
Please let me know if I'm the only one experiencing this problem ....
Thankx,
Paul

Is a scenario a project-dependent Object ??

Hi All !
perhaps this is a real trivial question.
Is a scenario a project-dependent Object or is it independent ?
thanks in advance

To create your scenario you evidently need to have a project with the distinct objects you want to put in.
But once the scenario generated you could drop all your objects and your scenario will work fine again.
So for it generetion the scenario is dependant on the package which is totally dependent on the objects.
After the generetion of the scenario it is totally independent on the project.
Cordially
BM

WIFI Icon Missing In Master Radio Control UI

Okay, after putting up with this issue for a couple few months or so, I decided it's time to fix this issue... Well nothing seems to work, I've updated both drivers for the wireless LAN adapter. I also had an issue with Access Connections, so I updated it along with Power Manager, hot key functions and communications as well for the heck of it...
Nothing seems to fix the issue, I still don't have individual control of my wireless radio, it just randomly quit showing up one day... Since it doesn't show up in the master control, I also can't select "Manage Wireless Radio..." when right clicking on AC... Every time I bring my computer out of standby, I have to hit the F9 key to bring up the master radio control. It shows the master control is already on, but if I turn it off and then back on it starts to connect and work again...
I almost forgot to mention I have an eGPU setup with a PowerColor Radeon HD 6850. I just tested this to see if it was causing my problems. I restarted my computer with the eGPU off, that way the computer would re-enable and use the iGPU. (Radeon HD 4250 Mobility) Well fortunately and yet unfortunately my eGPU is what was causing the radio control to not work correctly. So I updated the eGPU's display driver to the latest version which is 8.91, and the catalyst version 11.11 came with it, that fixed one of three problems...
Now at the welcome screen you have to hit Ctrl+Alt+Del to log on, that was just one thing that disappeared while using the eGPU... But the main problem with the master radio control still exists... Also the AMD Vision Engine Control Center says there's no compatible display driver installed, it does it with both the current and previous eGPU's display driver. So that's also another problem it still has, which might be related to the master radio control issue.
Here's a picture of the Master Control with it missing the individual control:
It's a modified Edge 15 0302-44U
AMD Phenom II X4 N970 2.2 GHz (Originally Athlon II X2 P340 2.2 GHz)
8 GB RAM
iGPU: Radeon HD 4250 Mobility
eGPU: PowerColor Radeon HD 6850
Win 7 Pro (64-bit)
BIOS Ver. 2.24 (Latest)

Thank you. This solution works perfect.
Greets from germany...
Here the solution for german Windows Users:

Numeric Control - Text and Background Color changes when operating inc/dec arrows

Hi,
I'm developing an application that has a panel with black background and green or red numbers. I've added numeric controls and configured the text color and text background color attributes accordinglingy. I set the numeric control to hot or validate control mode and show the inc/dec arrows, since I want to be able to incr/decr the numbers.
The problem is that when I run the application and I hit the inc/dec arrows, then the colors inside the numeric control frame become inverted: the black background becomes white and the green number becomes cyan. I've created a callback function assosicated with the numeric control and tried forcing the text and background color, in the EVENT_VAL_CHANGED section, using the SetCtrlAttrribute() function, but to no avail. Also added ProcessDrawEvents didn't help.
When I mouse click again outside the numeric control, then it reverts back to its original colors (green text, black background).
Any suggestions as to how I can fix this ?
I want it to keep its original colors at all times, even when I'm clicking the incr/decr arrows...
Kind regards,
pgriep
Solved!
Go to Solution.

Ok, now I see what's happening.
The effect you are seeing is a resul of standard numeric control behaviour combined with the black bcakground: when you use arrows to increment/decrement a numeric control its value will be automatically highlighted; on the default background you'll see the white area and figures highlighted in black (white numbers on balck background). If you set the background to black the system will automatically change the colors used to highlight the text, and that's what you're seeing.
By the way, this does not happens if you use up and down keys on the keyboard: text is not highlighted so colors are not changing.
Additionally, this is not only valid for numerics: see the behaviour of the string controls on the bottom of your panel when you tab up to them. This effect does not happen on controls set as indicator like the big clock in the upper part of the panel.
The only way I can see to overcome this behaviour is to hide control built-in arrows and create your own up and down buttons with which you can manipulate the numeric control. I am attaching a modified version of your project with buttons on the left numeric; sorry for the poor aesthetic: I have used some arrow icons I had on my disk, you may want to create your own arrows with the colors and shape you prefer.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Attachments:
ModifiedApplication.zip ‏9 KB

Senior Project Engineer Postion - Bloomy Controls, Milford, MA

Senior Project Engineer Postion - Bloomy Controls, Milford, MA
Purpose
Lead the development of automated test, data acquisition, and control systems. Involves extensive customer contact and moderate travel within New England. Contribute to system designs and specifications.
Requirements
- BS in Science or Engineering. EE Preferred. MS a plus
- Ten years of overall test, measurement, automation, and control engineering experience
- 5+ years LabVIEW required. TestStand, LabWindows/CVI or C/C++ experience desired
- DAQ, PXI, GPIB, VXI, vision, motion experience
- Experience writing requirements, documentation, UML
- Strong mathematics background, including signal processing in time and frequency domains
- Excellent verbal and written communication skills
- Experience in a variety of industries, such as electronics, communications, life sciences, power/energy, a plus
Responsibilities
- Write project specifications and system designs
- Design, develop, implement and document Test and Measurement applications using LabVIEW and TestStand
- Serve as technical mentor for less experienced engineers
- Devise, document, and oversee execution of test strategies
- Participate in tradeshows, conferences, seminars, and events
- Write technical papers and give presentations on applications
- Flexible career path may include principal engineering, project management, sales engineering, or engineering management
Note
- Candidates must be legally authorized to work in the United States. Bloomy Controls will not sponsor a new visa or transfer an existing one.
About Bloomy Controls
Bloomy Controls provides automated test, data acquisition, and control systems that help customers throughout the Northeast United States increase productivity, improve quality, and reduce costs. We support leading companies in a variety of industries, including aerospace, electronics, and life sciences.
Our employees enjoy highly stimulating and challenging work. We provide a creative, collaborative environment that is committed to your professional development and growth.
Send your resume to [email protected]

PPB,
Thanks for the posting. I just sent my resume and coverletter to the email address you listed. I look forward to hearing from you.
Respectfully,
Dave Lehman

Project depend on radio control helicopter and aeroplanes

Similar Messages

Maybe you are looking for