Project details of network ID in CN23
hi guys,
i need to create a report, to extract the details for Project PRs. i need to get the network ID, and together with the project details ( project ID, description etc).
but i were unable to find where the project details located in table, which link to the network ID ( NPLNR which found in EBKN).
the transaction code of viewing the project description for a network ID is CN23.
can any one tell me the tables for the linkage? thanks
Hi
base tables are PROJ and PRPS
from this take WBS element number and
The linking between the tables of network orders and the Purchase related tables are
afko-pronr = prps-psphi
afvc-projn = prps-pspnr
and
aufk-pspel = prps-pspnr
ebkn-nplnr = afko-aufnr for PR link
ekkn-nplnr = afko-aufnr for PO link
mseg-nplnr = afko-aufnr for GR/GI link
Regards
Anji
Similar Messages
-
Unable open Project details or a project from PWA Project server 2010 with Alias name
Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx)
its is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
can any one Help me.
vijay kommireddiHi Eric,
Thanks for your Reply.
As you said i have added in Manged Path as (Testpwa/projects.aspx as <Wildcard inclusion>) But still problem is there it is asking user
name password again if click on any project in project center and and showing page cannot be displayed error.
This is url its is showing in the below of the IE ( http://def.ad.com/testpwa/projectdrilldown.aspx?ProjUid=e28c6d43-85b6-478d-9542-2961cc81a69e)
I have observed one more thing if click on Project
details then only this issue is coming project schedule and project information
is also opening with Alias name.
My farm version is 14.0.7015.1000
Vijay Kommireddi -
Unable to edit the Project details from PWA in Project server 2013
I am Migrating the project from MS Project 2007 to MS Project 2013.In that i save the project as a file first in 2007 and then open that file in MS Project 2013 And publish it.But in some Project when i am Trying to change the projects details from
PWA in Project server 2013 and then trying to save then the projects are not saving and are generating the error as shown below
•GeneralQueueException:◦GeneralQueueException (9131). Details: id='9131' name='GeneralQueueException' uid='f7bb5d93-20e9-e411-b302-005056ae159c' messageID='2' exception='System.TimeoutException: This request operation sent to net.pipe://localhost/pscalc_13c43af4a7d34a2c8145b776b325a865
did not receive a reply within the configured timeout (00:05:00). The time allotted to this operation may have been a portion of a longer timeout. This may be because the service is still processing the operation or because the service was unable to send a
reply message. Please consider increasing the operation timeout (by casting the channel/proxy to IContextChannel and setting the OperationTimeout property) and ensure that the service is able to connect to the client. Server stack trace: at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message
message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.Office.Project.Server.Interfaces.ICalcService.OpenProjectRemappedProject(CalcServiceCallState callState, Guid realProjectGuid, Guid remappedProjectGuid, EngineSessionState& sessionState, EngineSessionType sessionType,
PSError& psError) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceChannel.OpenProjectRemappedProject(CalcServiceCallState callState, Guid realProjectGuid, Guid remappedProjectGuid, EngineSessionState& sessionState, EngineSessionType sessionType,
PSError& psError) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.<>c__DisplayClass2.<OpenProjectRemappedProject>b__1(ICalcServiceChannel calcServiceChannel, PSError& localPsError, EngineSessionState& localSessionState)
at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.<>c__DisplayClass6e`1.<RunCalcServiceOperation>b__6c() at Microsoft.Office.Project.Server.Base.IdentityUtilities.<>c__DisplayClass1`1.<RunWithAccessToAppTierServices>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback
secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at Microsoft.Office.Project.Server.Base.IdentityUtilities.RunWithAccessToAppTierServices[T](Func`1 action) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.RunCalcServiceOperation[T](CalcServiceOperation3`1
func, EngineSessionState& sessionState, String scopeName) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.OpenProjectRemappedProject(Guid realProjectGuid, Guid remappedProjectGuid, EngineSessionState& sessionState, EngineSessionType
sessionType) at Microsoft.Office.Project.Server.BusinessLayer.ProjectEngineUpdate.OpenProject() at Microsoft.Office.Project.Server.BusinessLayer.ProjectEngineUpdate.HandleUpdate() at Microsoft.Office.Project.Server.BusinessLayer.ProjectQueueDispatch.HandleProject2(MessageContext
mContext, ProjectMain project, ServerEventManager sem, ProjectDataSet dataset, Guid projectUid, Guid sessionUid) at Microsoft.Office.Project.Server.BusinessLayer.ProjectQueueDispatch.InternalDispatchMessage(IPlatformContext context, Message msg, Group messageGroup,
JobTicket jobTicket, MessageContext mContext)'.
•Queue:◦GeneralQueueJobFailed (26000) - ProjectUpdate.ProjectUpdate2Message. Details: id='26000' name='GeneralQueueJobFailed' uid='f8bb5d93-20e9-e411-b302-005056ae159c' JobUID='a6fa36de-1fe9-e411-b302-005056ae159c' ComputerName='1af8030b-7714-4c8f-8738-903b73e87a82'
GroupType='ProjectUpdate' MessageType='ProjectUpdate2Message' MessageId='2' Stage='' CorrelationUID='0a4aff9c-dd6b-7015-87a8-29d876e1540c'. For more details, check the ULS logs on machine 1af8030b-7714-4c8f-8738-903b73e87a82 for entries with JobUID a6fa36de-1fe9-e411-b302-005056ae159c.
What will i do .Please help.Hi Jeremy,
Thanks for the reply .I try the steps that is given in link above but its not working.Please suggest something.What
should i do. -
I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS -
Project Server 2010 Webpart for Project Detail Pages
Hello,
I do have a requirement where I need to develop a Project Server Web Part to show some calculated project information based on some business rule from Reporting database.
That webpart I have to add in Project Detail Pages to show calculated project information for the Project I have selected/clicked from Project Center.
So please tell me how can I link my webpart with ProjUID in URL like "PWA/Project%20Detail%20Pages/ProposalStageStatus.aspx?ProjUid=2b24d36b-7796-4789-ada3-d895d218fc14"
So that it shows data corresponding to opened project in Project Server.
Thanks and let me know in case have any doubts in understanding the requirement.Hi YLee_1980,
If I understand your requirement correctly then you can use ProjUID querystring paramater to get specific ProjectUID like below
HttpContext.Current.Request.QueryString["ProjUid"];
Then after getting ProjectUID you can use it anywhere in your SQL query, PSI method calling etc etc.
Also you can look into PS 2010 Solution Starter
custom solutions Kit to enhance your knowledge on PS 2010 development. That would a great starting point.
Thanks much hope this will help
Sachin Vashishth MCTS -
Data input in table format on a Project Detail Page
Hello,
Does anyone know of a way to input data for a Project Detail Page (e.g. Project Detail Page) in PWA 2013 using an Excel like view (table view)?
Also, is it possible to edit more than one project at a time in this view?
Thank you
MichaelHi Michael,
If you're using Project Server 2013, you have some 3rd party apps (free or not free) which propose an Excel-like spreadsheet to bulk edit project custom fields, such as
Nearbaseline or
FluentPro.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Robohelp 9.0.2 Access Project Files from Network Drive or SharePoint
Hello everyone!
I was wondering if anyone has suggestions for the following scenario:
Mutliple content authors traveling around the world need to access centrally place project files.
I know using a network drive is a bad practice, and I've been testing it with little luck today. Has anyone used SharePoint to house projects in the past?
What is the best way to share these projects on a network? It's becoming very necessary for us to do so, and I was wondering if anyone has had any success.
Ideas anyone?
Thanks!
JerryHi Jerry
Assuming SharePoint can function as a Source Control system it should work. Note that Source Control systems perform a variety of tasks. Librarian, Traffic Cop, etc.
With any Source Control system the files are centrally located. They have to be, no? But in my experience, you configure each of them in a similar manner. You designate a "Working Folder" that is on your local C drive. As you check files out and work on them, they are copied to your working folder. When you check them in, they are copied back to the server and updated. So you are working locally but the content is centrally located. Assuming SharePoint works that way, it should work for you.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
Flash Builder 4 super slow when Workspace and Project is on Network Drive
Hi I was wondering if maybe it is not common practice to create a workspace and project in a Network Drive? When I do this Flash Builder runs extremely slow ( build workspace slow, saving slow, code hinting slow, undo slow, etc, etc, etc). Very painful!
When I place the same project locally on my C drive everything runs fine. So should I not be running things off the network? I would really like to since all my files are on the network with backup system. Can anyone offer some advice? Or maybe I need to optimize something? Thanks
- DHi.
Having your workspace and project on a network drive is not recommended as Flash Builder writes and reads a lot from the workspace and that will be slow.
A version control system such as svn or git with a repository hosted on your network drive should be perfectly fine. (You only take the hit when you check in and check out)
-Anirudh -
Hi,
I am using project server 2010,I have requirement to show the project details history value,is it possible I can fetch the version history of project details custom fields value.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| TwitterHello,
So to confirm you want to know a project custom field value for a previous version of a project? You could potentially access this information from the Archive store using the PSI Read Project method and specifying the archive store:
https://msdn.microsoft.com/en-us/library/gg209668(v=office.14).aspx and use the custom field table:
https://msdn.microsoft.com/en-us/library/websvcproject.projectdataset.projectcustomfields_di_pj14mref(v=office.14).aspx
Or alternatively you could look at doing snapshots, the simplest way in via a SQL job:
https://pwmather.wordpress.com/2012/04/27/projectserver-data-snapshot-for-reporting-ps2010-msproject-sp2010-excel-ssrs-sql/
Snapshots could also be event driven, run from SharePoint timer service etc.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads -
How to create ZPS Report showing specific Project details?
Hi,
How do I create a custom ZPS report which shows Project details and progress The requirements are to see 20 fields in one single report . The fields which to be seen in the report are Labor Cost, Material Cost,Labor hrs,finish dates, billing plan, Milestones, NWA,Responsible person,Work Center,Warranty information all in one report.
Please advise how to create such a report.
Thanks much!you can use
ABAP
Query
Report Painter / Writer
to create your won reports
The choice will depend on what exactly you want -
Employee Contact details and Project Details
Hello Experts,
I need some information about the Employee Contact details, its project details. i.e. The tables from which I can retrieve the required data.
Is there any built in BAPI for the same??
Please reply.
Thanks,
PrashantHi Prashant,
Contact details of the employee is hold in info type 105; i.e. table PA0105.
For the project details, if you're using PS module, CNR2 transaction -> Capacity -> HRMS Button is used.
Regards,
Dilek -
Is it possible to have "Condition based custom project field entry in project detail page"
Hello All,
In PWA, In Project details page, when we add Displayed Project fields into the Project Information page, Is it possible that I have a custom enterprise field and based on its selection, I can choose the other field in that page.
I mean, say i have a Custom field in project page as 'Hardware' which has a lookup of say :
CD
DVD
Flash Drive
External HDD
Cloud etc.,
Then when a user selects any one of these. then the below appearing options will be based on this selection.
Say user selects cloud, then the next project field should be like Public, Private or Hybrid. Which is not same when user selects other fields.
I did not find any OOB solution for this. So can anyone please guide me how can I achieve this in PWA, so that these fields may be used as enterprise custom fields, which can be later used for Reporting purposes.
Thanks,
ShankyHello,
You could adopt this no code out of the box option approach:
http://psbehindthescene.blogspot.co.uk/2014/04/cascading-custom-fields.html
Or potentially look at adding JavaScript code to the page to do this programmatically - not looked at doing this but it should be possible.
Another option might be Fluent Pros Auto Complete Manager - this might offer this functionality but I have never used it:
http://www.fluentpro.com/productsautocomplete.html
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads -
Where to maintain project manager and Project details.
Hi Guys,
Whats the transaction or table to maintain project manager and project details.
Cheers
S KumarT Code OPS6 (table TCJ04). You maintain person responsible over here and then these values can be referred in project definition or WBS element.
Regards
Sreenivas -
Project Site Quick Links has 2 Project Details Links and no Recent Links
Hi,
Project Sites when created has 2 Project Details Links and the Recent Links with the it's sublinks does not appear. I have this problem on two PWA Instances and not on a 3rd. Project Server 2013 with SP1 installed. Does
anyone know what cause this?
Of the 3 PWA instances the 2 that it occurs on are on different SP farms. I have created a Mastersite template saved as a solution and added to the EPT. The Master site has the correct links before I save it as a template
Andrew
Andrew PayzeHi Andrew,
How did you create the site that you used as the template? Did it start out as a site already attached to a project? If so you should create a blank project site not attached to a project / create during the project create process. Part of the project create
/ site creation process adds properties associated to that project in the site's property bag etc. you don't want these properties causing issues for other project sites. See the steps below on creating an example custom project site template:
http://pwmather.wordpress.com/2014/02/02/getting-started-with-projectonline-part-6-ps2013-office365-project-ppm-sharepointonline-pm-sp2013/
The first part of that post covers project plan templates but the project site templates start from the section beginning with "The site template is a bit more involved than the project plan template"
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
Hi guys,
My question is on Project Detail Pages. I
I created a Page Detail Page and gave it a title. However, after capturing the details in the PDP form and then closing the form so my details could be saved and checked-in, I get the following error:
additional required project fields that have missing values are not available because of the project configuration
- Project Number
The error complains about the Project Number which is a field defined as mandatory on another PDP but not the current one.
What could be the cause of this?
Thanks.
Regards,
KwaziIt seems like, that the "Project Number" field was marked as "Required", and then not added to the PDP for people to fill out. So, you are kind of in a loop.
Make sure you either add the Project Number field to the PDP you are working with or make it not required.
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com
Maybe you are looking for
-
Error when activating Real Time Data Source
Hi.. I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System. I tried to activate this Real time Data Source in BW, it says "E
-
Not able to restrict users from using SU01
Hi ALL, We are working on roles related to SECURITY ADMINISTRATOR. The role has been given a transaction SU01D and not SU01. But the users are able to enter into SU01 through SUIM. I will illustrate this situation more: SUIM->USERS->BY LOGON DATE AND
-
I have hundreds of bookmarks.The Bookmarks Toolbar is filled.I made a shortcut of the "Unsorted Bookmarks" folder and placed it in on the Bookmarks Toolbar.Whenever I click the star to add a bookmark, it adds one to the real Unsorted Bookmarks, which
-
How to create WEB SERVICE in SAP
Hi guys , i am new to WEB SERVICE IN ABAP.what's the purpose of web service ? can anyone give me step by step example to create web service in SAP? ur answers will be rewarded. Regards pabitra
-
Set default font type and size in formcreated using Acrobat X Pro
I have a word document that I used Acrobat X Pro to create a PDF and then a Form. The Form has over 200 text fields. Is there a way to globally set the font type and size to one type, for instance Arial 10 so that when someone opens the Form and fi