Project does not advance after taking quiz.

After taking a 3 question quiz I set the project to jump to a specific page when the Continue button is pressed. The project does not advance to the chosen slide.

I'm having the same issue. The project (swf file) keeps freezing on the second quiz question. if i start the project on another slide, it still freezes on the second question slide presented.
I have cleared the cashe, tried setting it to a survey question. tried rebuilding the question slide.
I have no clue why it wont play thru.
Any suggestions? I need to get this project published today.
There are 6 quiz questions in the project total.
Thanks,
Stephanie

Similar Messages

Submit button in Cap 7 quiz does not advance learner to next quiz slide

I created a 5 question MC quiz in Cap 7. When I take the quiz in the preview mode, I am able to advance to the next slide by clicking on the submit button. Well, when I click on the submit button, a pop up appears that says: Correct - click anywhere or press 'y' to continue. Once I click anywhere, *then* I am taken to the next question.
However, when I take the quiz in a web browser, I cannot advance to the next slide, even when I answer the question correctly. I click the submit button. The same pop up appears as in the preview mode: Correct - click anywhere or press 'y' to continue. So, I click anywhere but nothing happens. The slide does not advance.
I've created a few quizzes before in Cap 7 using the same settings so I was stumped when the quiz didn't work this time. Maybe I accidentally changed a setting??

The jump to slide works great. Yes, the user goes right back to the quiz after remediation. The user can then change her answer and click submit. However, she can not advance forward. Sigh.
I am a freelancer who inherited the template from the former freelancer. I was told to use her template to create the trainings. So I am. I was supposed to use all the settings she used, too. That's why the Required is set to: User must answer every question'
I can try your idea and the Requirements in the settings.
What's odd, though, is that I've developed a Quiz using these same exact settings and it worked perfectly. That's why it's odd that the Quiz is no longer working correctly.
Okay, let me try to change the Required settings.
By the way, the submit button works fine in the Preview mode, just not the Web Browser mode.

Setting it up so that after a song finishes it does not advance to next????

I have many files that I need to play, though I want it setup so that after a song is done playing it does not advance to the next track. Is there anyway to do this? The only way I have found to do this is by making each and every song a separate playlist, however this will take a LONG time.
Thanks.

So if I create a playlist with songs that I want to play and place tracks in between each song and uncheck the ones that are in between, will it play the song that I want to play and stop when it gets to the unchecked song and then wait until I skip to the next song that is checked to play?
No. iTunes doesn't stop when it reaches an unchecked song, it skips over it. So in your scenario it will skip over the unchecked song, go to the next checked song and play that. If you want to play one song and then stop, uncheck all the songs. Then there are no other songs for iTunes to play next and it will stop after playing the one you specifically selected.

After the trial period I bought when starting an application, but does not advance. As I can activate it?

After the trial period I bought when starting an application, but does not advance. As I can activate it?

Hi,
Do you get any error while activating Muse, or could you please provide some more details.

Microsoft Project does not open; Even after enabling the project from Options - Addins - enable the Disabled file in the Manage options.

Dear experts
I have two issues for which I seek help.
1. My Microsoft project does not open, hangs, no matter how many times I disable the Options -> Addins -> enable the Disabled file in the Manage options.
I also copied the file and tried. It has no previous versions. Any advice
I plan to open this in 2013 version of Project later but I really need your advice.
Regards

Hi Protocoder,
If I understand well, this is a 2013 mpp file that you want to open with Ms Project 2013? Then you get Project hang? Are you using Project Server as well or just the standalone MS Project version?
Can you reproduce this issue with other files or just this file?
Your file might be corrupted, try this
method, export the file as XML and saving it back as mpp.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Open Other Project - Does Not Function

Hello -
We are finishing a CBT lesson in Cap 3 which includes 29
seperate projects. At the end of each project the student is
presented a button to take them to the next project, i.e. "Open
Other Project".
Here lies the issue, we have set this button to "Open other
project" and "Open URL or file". In both case the next project does
not open. The user is taken to an internet search page. We set up
the button "On Success" feature using the Captivate Help files
where it instructs you to remove all of the system paths and just
use the project or file names. Also confirmed button settings in
Advanced Interaction.
We are publishing our projects in .exe formats. This isuue is
present when we preview it using the preview feature and from the
.exe products.
What are we doing wrong, any ideas?

Hi again
I just conducted a brief test using a Button object and the
exact file names you listed. Things worked as expected on my end.
This is actually good news, as it suggests Captivate 3 isn't to
blame. Instead, something is wonky with your project(s).
One thing that strikes me here is that you say you are seeing
a Web Browser open. This suggests your button is programmed to
"Open URL or File" and not "Open other project". You may wish to
double check that. If you examine it and it already says "Open
other project", you may wish to delete that button and insert a new
one. Maybe somehow it became corrupt and is retaining the Open URL
or File setting and not respecting the Open other project setting.
Cheers... Rick

9.3.1 Migration Utility gives "Project does not exists" error in log

In preparation for using Hyperion Reporting and Analysis 9.3.1, I have installed the following on a Linux test server:
--Oracle App Server 10.1.3
--Oracle Database 10g XE
--Hyperion shared services 9.3.1
--Hyperion UI Services 9.3.1
--Hyperion SQR Production Reporting 9.3.1
--Hyperion Reporting and Analysis, Financial Reporting 9.3.1
Everything is up and running and I created a new user account in Shared Services to administer the system, and attempted to give it full access by provisioning it with all the available roles. I received an error message stating
"+OracleJSP: An error occurred. Consult your application/system administrator for support. Programmers should consider setting the init-param debug_mode to "true" to see the complete exception message.+"
I'm investigating that now, but the roles seemed to be assigned to the user anyway.
When attempting to migrate from HPSu 8.5.2 to Reporting and Analysis 9.3.1 using the 9.3.1 Linux x86 Migration Utility (V11333-01 from edelivery.oracle.com), I get the following error message in a test migration:
The migration process has been failed on 'User Defined Roles' migration step*
I set the log level to debug and looked it over and here are the error details:
+\[09 16 10:49:29,080] \[ERROR ] The migration process has been failed on 'User Defined Roles' migration step+
+\[09 16 10:49:29,081] \[ERROR ] com.hyperion.interop.lib.OperationFailedException: Project does not exists by this id '%201252935352214.11'.+
com.hyperion.pmt.migrator.common.CommonException
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.doAssignDefaultGroup(MigrationManagerImpl.java:864)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.startMigration(MigrationManagerImpl.java:751)
at com.hyperion.pmt.migrator.userprovision.ui.panels.MigrationPanel$ProcessRunner.run(MigrationPanel.java:304)
Caused by: com.hyperion.interop.lib.OperationFailedException: Project does not exists by this id '%201252935352214.11'.
at com.hyperion.interop.lib.helper.AdminProjectHelper.getProjectNameByID(Unknown Source)
at com.hyperion.interop.lib.CMSClient.getProjectNameByID(Unknown Source)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.getDefaultGroupBundle(MigrationManagerImpl.java:824)
at com.hyperion.pmt.migrator.userprovision.tool.MigrationManagerImpl.doAssignDefaultGroup(MigrationManagerImpl.java:861)
+... 2 more+
We've only one user-defined role in the source system that I don't think is giving us this issue, it is inactivated and "User Roles" was not one of the selected objects to migrate.
I would like to try taking the role completely out of the source system if possible, preferably through SQL applied to the V8 tables or through the SDK.
The error looks like it lies in the migration task following the user role provisioning, doAssignDefaultGroup* and is caused by getProjectNameByID*
The steps I have taken (for sanity sake) so far are:
--I've removed all associations with this user defined role in the source system (users, groups, and roles) using the administrative interface on the web.
--I've unchecked 'User Defined Roles' on the list objects to migrate from the source to target systems in the Migration Utility, but I still get the error.
It looks like it is trying to provision a user defined role in the target system, but it is not finding a default project by the id in the error message.
Are there any Shared Services steps in the target system that need to be taken besides creating a manager type user to use as a log in for the Migration Tool?

I turned on the jsp debug init-param for the system for more information about the error. I get the following:
Request URI:/interop/jsp/css/CSSTemplate.jsp
Exception:
OracleJSP:oracle.jsp.parse.JspParseException: /jsp/css/provisionSummary.jsp: Line # 119, <bean:define id="appId" name="appName" property="key"/>
Error: Tag attempted to define a bean which already exists: appId
When I attempt to provision the user I created for administrative purposes, Ialso see the following:
--from the file SharedServices_Metadata.log I see the error:
+2009-09-18 15:55:32,399 \[AJPRequestHandler-HTTPThreadGroup-6\] ERROR com.hyperion.eie.common.cms.CMSFacade - org.apache.slide.structure.ObjectNotFoundException: No object found at /users/admin+
--from SharedServices_Admin.log
+2009-09-17 14:49:20,583 \[Thread-13\] ERROR com.hyperion.cas.server.CASAppRegistrationHandler.loadApplicationsFromCMS(CASAppRegistrationHandler.java:430) - AuthorizationException occured when loading applications : Refer log in debug mode for details+
How does one set these logs into debug mode ?

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance.

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on. Please, What must I do so that when I click the Spacebar (i.e., "Play"), the image does indeed advance? Thanks!

This pertains to Adobe Premiere Pro CS6:
Thanks for your prompt reply. This is my first post and I appreciate your patience. I imported media into the Project Panel. From there, I placed a few clips into a sequence in the Timeline. In the Timeline, I clicked on a clip. I then double clicked in Program Panel, and could then see the clip. However, when I click on the space bar, (i.e., "Play") in the Program Panel, the image in that panel does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on a bit in the footage. (The audio plays normally, confirming that we are advancing in time. )
I want to be able to press the space bar in the Program Panel and to see the "motion picture" in the Program Panel.
Please, What must I do so that when I click the Spacebar (i.e., "Play") in the Program Panel, the image does indeed advance? Thanks!
Not sure I yet have the capabibility of providing a URL of the problem.
Thanks for your guidance,
David

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox.

Enqueue replication server does not terminate after failover

Hi,
We are trying to setup high availability of enqueue server where in we have running enqueue server on node-A and ERS on node-B all the time.
Whenever enqueue is stopped on node-A, it automatically failovers on node-B but after replication of lock table, enqueue does not terminate the ERS running on node-B and as a result our enqueue and ERS both keeps running on the same host (Failover node-B) which should not be the case.
We havenu2019t configured polling in that scenario SAP note-1018968 depicts the same however this is applicable only for version-640 and 700.
Ideally when enqueue server switches to node-B, it should terminate the ERS on the same node after replication and then HA software would take care of its restart on node -A.
We have ERS running of version 701; could anyone please let me know if the same behaviour is common for 701 version as well?
Or there is any additional configuration to be done to make it working.
Thanks in advance.
Cheers !!!
Ashish

Hi Naveed,
Stopping ERS is suppose to be taken care by SAP only and not the HA software.
Once ERS stops on node -B there would be a fault reported and as a result HA software will restart the ERS on node A.
Please refer to a section of SAP Note 1018968 - 'Enqueue replication server does not terminate after failover'
"Therefore, the cluster software must only organise the restart of the replication server and does not need to do anything for the shutdown."
Another blog about the same:
http://www.symantec.com/connect/blogs/veritas-cluster-server-sap
- After the successful lock table takeover, the Enqueue Replication Server will fault on this node (initiated by SAP). Veritas Cluster Server recognizes this failure and initiates a failover to a remaining node to create SAP Enqueue redundancy again. The Enqueue Replication Server will receive the complete Enqueue table from the Enqueue Server (SCS) and later Enqueue lock updates in a synchronous fashion.
So it is nothing about HA software, it is the SAP which should control ERS on node-B.
Cheers !!!
Ashish

My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be.

WIFI does not reconnect after a standby

Since I installed "OSX Mavericks" on my MACBOOK AIR, the wireless network does not reconnect after a reboot or standby. I need to disable the wireless and reactive for the connection resumes!
Thanks for your answer...

http://carnationsoftware.com/LastA2DPDevice_Mac_Wireless_Problem.html
Trash your Bluetooth preferences, restart your Mac.
Open Bluetooth Preferences (Apple Menu, System Preferences, Bluetooth)
Remove any audio devices that are shown in the upper section of that list.
Pair your Bluetooth Speaker or headset device and then connect and disconnect it.
Open /Library/Preferences/com.apple.Bluetooth.plist
If the LastA2DPDevice item is present, then you know you have just paired a A2DP device. You need to trash your Bluetooth preferences and restart your Mac again.
The problem is caused by an interaction with Bluetooth and specifically Bluetooth devices that use Advanced Audio Distribution Profile (A2DP) which is used to stream bluetooth audio from devices such as Bluetooth headsets and Bluetooth speakers.
The problem is caused when the Mac goes to sleep and wakes back up. It tries to connect to the A2DP device that was last used by the Mac. If that device is not powered on or is not in bluetooth range, it will keep trying to connect to that device (for an unknown amount of time). While it is looking for that Bluetooth device, the 802.11 wifi is also looking for the last wireless router or access point and fails to find it.
Why the wifi is unable to reconnect after waking from sleep is not exactly clear because wifi is a different protocol than Bluetooth. One hint is that it only seems to fail with wireless routers that run on the 2.4 Ghz band. That is the same frequency that Bluetooth uses (even though Bluetooth hops through different smaller bands within that frequency.)
I do not have the problem when at home and connected to my Airport Supreme Wireless AC router which is running on the 5 Ghz band.
To prove this, here is what I did...
1. Go to a location where you are having the sleep / wake wireless problem and take your Bluetooth speakers or Bluetooth headphones with you.
2. Now while at that location, Connect to the wireless network there.
3. Turn on the power to your Bluetooth device (speakers or headphones).
4. Turn Bluetooth on and connect to your Bluetooth device.
5. Put your Mac to sleep for 45 seconds (that is enough time for the Macbook to shut down power to Bluetooth.)
6. Wake your Mac back up and you will notice that there is no problem reconnecting back to the wireless network.
7. Now turn OFF the power to your Bluetooth device and put your Mac to sleep for 45 seconds.
You will see that your MacBook will not connect back to your wifi wireless network after it wakes from sleep.
That is because it is looking for your Bluetooth device that it cannot find.
Note that this test is only valid if you are using a Bluetooth device that uses the A2DP protocol. I did my tests with a Bose Soundlink Mini speaker.
I am connecting to a Netgear N300 Wireless Router (WNR2000)

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

Project does not advance after taking quiz.

Similar Messages

Maybe you are looking for