Project/Event update for 10.1.1. = missing projects

I just updated to 10.1.1. When I started FCPX I selected to allow automatic update. During the process it stated there was an error and to check my Libraries and Events were improted correctly. My Libraries all seem to have imported OK, but my Projects are missing. The files seem to still be under Movies/Finat Cut Projects, so I tried to do a manual import. When I selected to import manually, the Fina Cut Project folder under Movies is greyed out.
How do I get my projects back in to FCPX 10.1.1?

I had this same problem. Fiddling fixed it, so here's how I fiddled & fixed:
Saw in FCPX 10.1.1 the "Updated Projects" item in the Events list (or where I always saw events before. But no projects appeared in the Timeline. "Where da hail did dey go?" I said to myself. Blood pressure rose like 100 points. I read through every online entry I could find. Nothing. Rebooted, ran permissions repair; still nothing. ARRRGH.
In desperation, I double-clicked "Updated Projects" – because working the twisty triangle didn't do anything.
Suddenly, something begain to happen. There was a progress bar. Does this mean actual progress??
It did! *Voila!* The missing projects appeared in a list. Clicking on the one I wanted opened it in the Project timeline. BOOM. Fixed.
Hey, Apple! You might have TOLD us in some really PLAIN way that this was the way to open projects now. Just sayin'. I mean, the amount of hate-posts on forums the world over that have been generated around this one problem is incredible, and it could have been prevented with some simple "Here... do this instead" directions.

Similar Messages

TS4123 A recent download of an iTines update - for whatever reason - failed on my computer. Since then I get a system error statement telling me that the program cannot open because 'MSVCR80.d11' is missing from my computer. When I attempt to open iTune

A recent download of an iTunes update, for some unknown reason, failed on my computer. Since then I get a system error message everytime I log on telling me that the program cannot be opened because 'MSVCR80.d11' is missing from my computer. When I try to open iTunes I get an 'error 7 (Windows error 126)' message and am advised to reinstall iTunes. However, when I attempt to do this, it downloads the programme and gets as far as installation, at which point I get yet another message: this time 'Service Apple Mobile Device failed to start'.
I am at a loss to know what to try next and would appreciate any assistance. I'm also concerned that, in the process of reinstalling iTunes, I am going to lose all the music I have collected over the years.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99602)

HT1926 I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126)

I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Update Retriever missing update for S30 Model Type 4351

Update Retriever missing update for S30 Model Type 4351. Missing update for Nvidia External VGA Driver Version 321.01 for Windows 7 (64-bit), Windows 8 (64-bit) - ThinkStation S30, D30. Retriever only lists udpate for AMD external VGA driver. This model shipped with Nvidia Quadro K2000 graphics card.

Sorry for the delay. Working through some internal issues regarding content support for ThinkStation. Trying to get the content updated and released as soon as possible.
I believe the driver you are looking for has been replaced by the following:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028285
Note: the readme shows a more complete list of supported adapters

After Safari 5.1 update the following plugin is missing: Switchable Java Plug-in for WebKit

Hi, after Safari 5.1 update the following plugin is missing: Switchable Java Plug-in for WebKit Java Switchable Plug-in (Cocoa) — von der Datei “JavaPluginCocoa.bundle”. How can I add this plugin manually? Because some applets are not working now! I restored the OS to Safari 5.0.5,
now everything works fine. Is there any bugfix planned for Safari 5.1?

Thanks, already managed to fix it with Time Machine Back-Up, however, you need only to restore the Safari.app file (can be found in Applications in Time Machine at a date before the last software upgrade to Safari 5.1)
So, practically,
go to Enter Time Machine
-> browse (using the arrows at right hand bottom) to a date when everthing was still working
-> go to Finder
-> go to the hard drive (probably named Macintosh HD)
-> go to Applications
-> go to Safari.app
-> highlight Safari.app by clicking on it
-> hold 'ctrl' key and click again
-> select from the drop menu that appears 'Get Info'
-> next verify that is written 'version 5.0.5'
-> close Info drop menu
-> make sure the file Safari.app is still highlighted and click on 'Restore' under the arrows at righthand bottom of screen in Time Machine.
Now you can leave Time Machine by clicking on Cancel on lefthand bottom
Safari 5.0.5 will be added to the Applications under Safari.app (Safari 5.1 will also still be there and has the word (original) written behind it) drag this (original) marked file to the trash.
That's all, works very good and means the whole system does not have to be re-installed.
Hopefully Apple will cure this 5.1 version quickly - Make sure always to make a Time Machine Back-up before updating software!
Hope this works for you all!

Project Managers to know when a task has been updated for the last time

Hi,
I would like know if there is any timestamp feature in Project Server 2007, so that it can be possible for Project Managers to know when a task has been updated for the last time.
Thanks in advance

Hi,
If you are using the My Tasks to drive the task updates then you can use the 'Applied Requests and Errors' available under 'Go To' in the Task Updates area. Here the PM can find when requests have been approved and how many updates he/she received for a
particular task (by clicking the task name) etc.
Hope this helps
Paul

After renaming and moving to my desktop an iMovie project, i can not open it. I moved it back to iMovie but still it is not working. I noticed that there is not an Event Folder for the project. Can someone help me?

I renamed an iMovie project, then I moved it out of iMovie to my desktop. It did not work from there. Finally I managed to move it back to iMovie, but still does not work. I can't edit it, it does not even appear as an option. I found out that the Event Folder for this Project is gone. Is this the problem? Is there a way I can get it back? Can somenone help me?? Obviously after so many mistakes you can tell I am new on this. Any help will be appreciated it!!!!!

OK Let's take a step back.
If you imported video clips from a camcorder there would be an Events folder in the Movies/iMovie Events/ folder.
You have the option as you import from a camcorder to send your Event to an external drive instead. In this case, it would be in the iMovie Events folder at the top level of the external drive.
If your project has no video clips, but only photos, there may be no events folder, only links to iPhoto.
Similarly, if your camera imported your video clips to iPhoto, and you used the iPhoto event in iMovie, then your clips are in iPhoto, and there is no separate iMovie event.

Project Kickoff and ERP Integration workshop updates for r1402

The following workshops and accelerator are update for r1402 in the SAP Cloud for Travel and Expense Service Delivery Kit wiki (only SAP employees and partners have access).
Implementation Project Kickoff
SAP ERP Integration Workshop
Systems Requirements Checklist
We welcome any feedback in the Accelerators and Workshops Feedback wiki.

Hi,
I think most of your questions have already been answered.
Regarding the difference from SAP SRM, the E-Sourcing product is Java based and it takes lesser time to setup.
Configuration is through the UI.
Functionally, the benefits are very similar between ES and SRM - however E-Sourcing additionally supports Contract Document Authoring and Forward Auctions.
From the technical configuration point, Java and SQL skills are needed for customizations.
Also ES is available as an On-demand product.
Hope this helps.
Regards,
Reshma

HT4623 I have an iPhone 4 and for some reason I'm not able to update the software. I go to Settings then General but it doesn't even have a Software Update option. Am I missing something?

I have an iPhone 4 and for some reason I'm not able to update the software. I go to Settings then General but it doesn't even have a Software Update option. Am I missing something?

With iOS 4, the only way to update your software is connected to iTunes. OTA (over the air) updates were not available until iOS 5. You will need to connect your iPhone to a computer and use iTunes to download and install the iOS updates on your iPhone (at least until your iOS version is 5.0 or higher).

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls. Help?

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls for that track (reverb, etc.) Help?

Try this fix posted by Robinson Collins:
Re: I downloaded Garage Band 2x and the same note appears: there is no General Audio 10. Please advise. Thank you.
Try this: Go to your menu bar, select "Garageband" and then "Restore Sound Library..."
It can take awhile to download as it's a pretty big library. You might need to also select "Update Sound Library..." after the restore is done.

I cannot download the latest update for itunes because it say the file itunes.msi is missing

I cannot download the latest update for itunes because it says that the file itunes.msi is missing

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Unable to get automatic event handling for OK button.

Hello,
I have created a form using creatobject. This form contains an edit control and Search, Cancel buttons. I have set the Search buttons UID to "1" so it can handle the Enter key hit event. Instead its caption changes to Update when i start typing in the edit control and it does not respond to the Enter key hit. Cancel happens when Esc is hit.
My code looks like this -
Dim oCreationParams As SAPbouiCOM.FormCreationParams
        oCreationParams = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
        oCreationParams.UniqueID = "MySearchForm"
        oCreationParams.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Sizable
                Dim oForm As SAPbouiCOM.Form = SBO_Application.Forms.AddEx(oCreationParams)
oForm.Visible = True
'// set the form properties
        oForm.Title = "Search Form"
        oForm.Left = 300
        oForm.ClientWidth = 500
        oForm.Top = 100
        oForm.ClientHeight = 240
        '// Adding Items to the form
        '// and setting their properties
        '// Adding an Ok button
        '// We get automatic event handling for
        '// the Ok and Cancel Buttons by setting
        '// their UIDs to 1 and 2 respectively
        oItem = oForm.Items.Add("1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 5
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
        oButton = oItem.Specific
        oButton.Caption = "Search"
        '// Adding a Cancel button
        oItem = oForm.Items.Add("2", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 75
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
        oButton = oItem.Specific
        oButton.Caption = "Cancel"
oItem = oForm.Items.Add("NUM", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oItem.Left = 105
        oItem.Width = 140
        oItem.Top = 20
        oItem.Height = 16
        Dim oEditText As SAPbouiCOM.EditText = oItem.Specific
What changes do i have to make to get the enter key to work?
Thanks for your help.
Regards,
Sheetal

Hello Felipe,
Thanks for pointing me to the correct direction.
So on refering to the documentation i tried out a few things. But I am still missing something here.
I made the following changes to my code -
oForm.AutoManaged = True
oForm.SupportedModes = 1 ' afm_Ok
oItem = oForm.Items.Add("1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 5
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
oItem.SetAutoManagedAttribute(SAPbouiCOM.BoAutoManagedAttr.ama_Visible, 1, SAPbouiCOM.BoModeVisualBehavior.mvb_Default)
        oButton = oItem.Specific
        oButton.Caption = "OK"
AND
oForm.Mode = SAPbouiCOM.BoFormMode.fm_OK_MODE
oItem = oForm.Items.Add("1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 5
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
oItem.AffectsFormMode = False
I get the same behaviour OK button changes to update and enter key does not work.
Could you please tell me find what is it that i am doing wrong?
Regards,
Sheetal

Update for Microsoft Visual C++ 2012 Update on Windows 7

I received the Update for Microsoft Visual C++ 2012 Update 4 Redistributable Package (KB3032622). The installation failed. Here are the details
Installation date: ‎2/‎10/‎2015 8:35 PM
Installation status: Failed
Error details: Code FF
Update type: Important
If you use Visual Studio 2012 RTM product to build C++ apps and use certain functionality from the C++ Standard Template Library in your projects, then you might run into a runtime failure similar to the following:
"The procedure entry point_ crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll"
This was caused due to certain missing function exports in the runtime DLL msvcr110.dll that shipped with VS2012 RTM. This problem was eventually fixed in Visual Studio 2012 Update 4. This article
ensures that the correct runtime DLLs are provided to all users who had previously installed the faulty DLLs from Visual Studio 2012 RTM
More information:
http://go.microsoft.com/fwlink/?LinkID=525548
Help and Support:
http://support.microsoft.com
I tried to run the update troubleshooter, but it did not help. I tried Microsoft Fixit50123, but that did not solve the problem either.
Little Old Prof

Hi Little Old Prof，
I’ve noticed that similar case occurs on this 2/10/2015 update (KB3032622) in some environments. But still a small number.
And we suggest you run the Windows Update Troubleshooter first and check if there is something need to fix.
After that please recheck if this update still in your list of updates to be applied.
Open the Windows Update troubleshooter
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-8
And again, we would appreciate it if you could send us right cbs log file for our reference. Turns out the CBS log you sent to us was ending at 19:01 2/10/2015 and your error occurred at 20:35 2/10/2015.
Regards
D. Wu

Event handler for STDIN input?

Hi,
This question will probably require a bit of context - I'm attempting to re-implement in java an application that's currently written in perl. The application is a server helper app that rewriters urls; it receives a request ID and a URL on stdin, does the necessary munging (which can require an external SOAP query), then returns the resulting rewritten URL.
Since the results can be asynchronous due to the need for external queries to build the result, this is currently a multithreaded perl app implemented using perl's POE framework to register an event handler for stdin. That handler fires each time a line of input is received, then feeds the query to a thread pool manager (POE::Component::Pool::Thread, which is conceptually similar to the Executor frameworks). The thread returns the result as a callback registered to another function in the main thread, which then populates the query/result to a cache then outputs the result (with the original query ID) on stdout. Since stdin input and the result callbacks are event-driven, there's no while(true) main loop or other blocking mechanism in the main thread. Unfortunately, it's perl-ness is causing problems due to perl's threading implementation (three words: "copy on init"), so we need to reimplement in a language with a more robust threading implementation (preferably one with copy-on-write for shared objects). So, Java it is.
So far everything's been good - Executor, Callables, and Futures work as I hoped they would for proper thread management, and the internal worker thread logic (XML processing, SOAP, regular expressions, etc) is proving rather simple to adapt. However, the main roadblock I'm hitting is that so far, I have not found a way to register any sort of event handler for STDIN input (or more specifically, InputStreamReader/BufferedStreamReader events). This could be due to search engine pollution - everything I see when I search for documentation on event listeners appears to be GUI-specific (buttons, menus, text areas/forms, etc). I'm just looking for a way to handle a line of STDIN, not a text area on a form.
Any pointers in the right direction will be much appreciated!

rekoil wrote:
Maybe I need to rethink the design here...
The main reason I used a callback in the original perl is that there's a large cache structure that gets checked before the thread dispatch, and only cache misses get pushed to a thread for processing. Callbacks from the threads will then add its results to the cache. Thanks to perl's thread model, when I attempted to make the cache a shared structure - in perl, you have to explicitly mark as "shared" variables that you want visible to all threads - the structure wound up getting copied to every thread, and this gave the app an unacceptable memory footprint. So the solution was to use a callback in the main thread to update the cache.
I'm now thinking that if Java's thread model is a bit saner (i.e. a shared object doesn't get copied into every thread), then I could just have each thread update the cache, print its output to STDOUT directly, and avoid the need for the callback. I can then make my input loop simply a while() loop, waiting for the next input to dispatch. Sound sane?Yes I think so.
There is some of this I still don't entirely understand. Your loop sounds better now but it sounds to me like the process is this.
1) read from in
2) call some stuff on the basis of what came in
3) do work
4) workers produce things
5) things written back out
6) read back in??
If you're just going in/out then great. If you are going in/out/in then maybe some sort of PipedInput/Output Streams? It may well be that I got lost in your explanation in which case never mind.

Wish List Updates for Snow Leopard

If you support any of the following, please send them to Apple's suggestion box.
I would like Apple to offer the following settings, preferably without third party fixes. HOWEVER, feel free to respond with your favorite work-around solutions. I need to learn Terminal!
1. Safari - close download window upon completion
2. Safari - remove ALL cookies and cached items when "resetting" same. There are always a select few that have to be manually deleted
3. Safari - have a built in video downloader/converter - Yes there are good third party solutions for this
4. Safari - allow Private Viewing as a default option
1.Pointer options - Create an option in preferences to enable the pointer to automatically go the default option selection (as is possible in that "other" operating system. You know, the one that pirated the window concept)
1. Apple mail - #1 request is identify a way to allow the numerous superior email clients interface as seamlessly with other native apps.
2. Apple mail - short of that, create a setting to turn off or allow a time setting to override an email automatically being marked as read if it happens to be highlighted with you open the app, thereby appearing in the preview pane. Appearing in the preview pane does not mean I have read it.
3. Apple mail - provide an option for creating return receipts requests
4. Apple mail - What it that box that appears around blocks of text in received mail that makes editing more difficult than it should be
5. Apple mail - Provide a tool to apply the formatting to other parts of the email (sort of like the paint brush tool in that OS with the "W" word)
6. Apple mail - If I label a sender as "not-junk" do not put label mail from this sender as Junk. I do not want all senders in my address book.
7. Apple mail - If I label a sender as "JUNK" future mail from this sender should also be JUNK, no?
8. Apple mail - Create a rule that allows "Bounce" as an option
1. iPhoto - I know I must be missing something here, so please chime in -
How or what can I do to save photos into iPhoto when I am not using iPhoto. The most common annoyance for me is saving photos off email attachment or from the web. There MUST be something I am doing wrong. Where is the "Save to iPhoto Library" option?
1. QuickTime - Please bring back QT Player 7!!!
12. I know we mustn’t use "other" browsers, but in those rare events that it happens - how nice would it be to have a native bookmark sync option or common folder?
13. Finder - allow more columns in the viewing options for Spotlight
Please feel free to add to the list.

kurt188
Re: Wish List Updates for Snow Leopard
Feb 12, 2012 9:59 AM (in response to CAPTJON)
So may words, so little help. You do realize that they call this a Support Community, right?
1. Safari - close download window upon completion
Mine already does this, and I'm sure you can do it in Snow Leopard, too.
     When you refer to "mine," what OS are you referring to? Are you willing to share your knowledge on where I might find this capability?
3. Safari - have a built in video downloader/converter - Yes there are good third party solutions for this
That's not the job of a browser, and it's not going to happen. Keep dreaming.
     Thanks again for the helpful advice. I am impressed with our willingness to help.
4. Safari - allow Private Viewing as a default option
You can turn it on yourself. There's also AppleScript, or assigning a keyboard shortcut.
     I am very aware of how to turn it on. I would prefer to leave it on by default. Care to share your AppleScript knowledge?
Apple mail - provide an option for creating return receipts requests
It's been there for years—where have you been?
     Thanks again for the poweruser tip, very helpful.
1. Apple mail - #1 request is identify a way to allow the numerous superior email clients interface as seamlessly with other native apps.
That's entirely your opinion, which isn't shared by the vast majority of Mac users.
     I am sorry I do not share you opinion, nor did I know you speak for the majority of Mac users. Perhaps with your superior guidance I would become a power user too?
Where is the "Save to iPhoto Library" option?
Have you tried looking at the options given to you when you receive email with attachments? There's a Save button in the Header section that gives you the option to save the image to iPhoto.
     And how does this sugggestion help when downloading a photo from the web?
Perhaps if you spent time getting to know your Mac and OS X, you'd find that there aren't nearly as many "issues" as you seem to imagine.
     Yes, and I perhaps if you would share a bit of your superior knowledge I would agree. That was my hope in posting to a "support community." You put a fair amount of effort into your criticism. Just "imagnie..."
Correct Answer

Project/Event update for 10.1.1. = missing projects

Similar Messages

Maybe you are looking for