Project explorer cannot detect my PXI 7952R

i am using PXI 7952R and PXIe-8115 in a PXIe-1071 chssis. when i open MAX, my PXI7952R device seems to be detected (if i am not mistaken). however, when i try to open a new FPGA project, the project explorer can't seem to detect it. is this a configuration problem or the device defected? 
PS: i am really new in this field.
Solved!
Go to Solution.
Attachments:
Capture.PNG ‏55 KB
capture 1.PNG ‏54 KB

If you want to add a remote target to a project, you right click the project and select New>>Targets and Devices like you did. However if you want to add an FPGA device, you select the target that has access to the FPGA device, right click that, and select New>>Targets and Devices. So in this case, what you should be right clicking in the project is "My Computer"
Also make sure that you have NI FlexRIO installed.
National Instruments
FlexRIO Product Support Engineer

Similar Messages

  • Problems (bugs) with Project Explorer LV8.5.1 Windows Vista 64bit

    Helo all,
    I am using Windows Vista 64bit with all updates and service packs on an ASUS G1 dual core 4gig memory.  After writing code for a while I find that I cannot execute my top level vi from the project explorer.  I can run the vi from outside the project no problem.  If I try to create a new project and load the vi into it the LV hangs and the windows task manager cannot kill either the vi or the new project explorer, I have to reboot the computer to recover.  I have attached the vi.
    regards,
    Karl
    Attachments:
    FS Test Main V0.9.vi ‏164 KB

    Hi Karl,
    I am having a look at this issue--I shall try to reproduce it and get back to you with my results.
    Ipshita C.
    National Instruments
    Applications Engineer

  • My v3753au (32bit win7) bios cannot detect internal dvdrom & hard to detect internal hdd?

    hi...
    my v3753au is wonderfully running on 32 bit win7.  lately the bios cannot detect the internal dvdrom & kinda hard to detect (longer than usual) the internal hdd during startup.  i've tried with the other dvdrom & it's still the same.  however, the one that i used is still ok on other laptop.  fyi, i've tried with the original f.15 version as well as the latest f.28 version but both let me down.  when win7 runs, dvdrom doesn't appear either in win explorer or device manager.  i've also checked the registry for that filter thing but it isn't there.  any suggestions of what should i try next?
    tq for the help...

    > I couldn't reinstall/recover new system from CD cos Win7 couldn't detect any drive while installing.
    Its no matter if the SATA mode is set to AHCI or compatible mode. The HDD should be recognized by BIOS even if the AHCI mode has been selected.
    At the first BIOS page the HDD should be listed with the name and size.
    If it isnt the case, it could be possible that your HDD controller is faulty.
    What HDD did you purchase exactly? Is it a 2.5 SATA HDD?

  • Dragging over a Subdiagram Label breaks drag-and-drop from Project Explorer

    This bug has proven to be perfectly repeatable on my system. I'm using the LabVIEW Core 3 Course Project to reproduce:
    1. Open the block diagram of a VI with while loop or case structure whose Subdiagram Label is visible.
    2. Drag a VI or control from the project explorer onto the block diagram.
    3. Drag the VI over a Subdiagram Label, then away from it.
    RESULT: Object is ready to be dropped until you drag over a Subdiagram Label; after this the object cannot be placed, as though it is always in an invalid location. See attached pictures.
    I'm using LV 13.0f2
    Ryan R.
    R&D
    Attachments:
    1 - drag VI onto block diagram.png ‏11 KB
    2 - drag VI over Subdiagram Label.png ‏11 KB
    3 - drag VI away from Subdiagram Label.png ‏11 KB

    Sorry for the delay, I was out teaching for a while.
    I have filed CAR 449383 documenting this issue.
    Regards,
    Craig H. | CLA | Systems Engineer | National Instruments

  • Support Undo in Project Explorer

    There are critical actions in the project explorer that cannot be undone (the Undo menu item is there, but it does not get enabled).
    Do some intended changes without saving afterwards, then accidently delete something - and you have no way back other than to start all over.

    11 kudos in 3 1/2 years?

  • EasyLink Advisor cannot detect WRT300N on wired computer

    Upgraded my router to WRT300N with a WRT150N running as an access point.  Laptops are now running just fine both base and access point.  Wired computer has Internet, Network drive access, and can access the router setup (192.168.1.1).
    Trying to load the EasyLink Advisor.  It cannot detect the router.  The setup is cable modem to switch, cat5  to ethernet card to computer.  Even tried bringing the modem to the computer and direct connecting. Still no luck.
    The EasyLink Advisor is verison 1.6.0032
    The WRT300N router is version 1.1 with firmware 1.51.2
     Please help.

    Configuration for cable connection:-
    Before doing the following steps, you have to connect the modem to the
    router's Internet Port and the computer to the Ethernet Port Number 1.
    Step 01 : - Reset the router
    1. Press and hold the reset button for 30 seconds.
    2. Then, unplug the power keep holding down the reset button for
    another 30 Seconds.
    3. Plug back the power back in, and keep holding down the reset button
    for 30 Seconds.
    4. Release the reset button.
    Please access the setup page of the router by launching an
    Explorer and type on the address bar, 192.168.1.1 and press enter. When
    it prompts for the username and password, leave the username field
    empty and provide password as admin.On the main setup page the ""Internet Connection Type"" should be
    on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
    button.
    Now click on the sub tab ""MAC address clone"".
    - Click on enable
    - Click on clone your PC's MAC button and then click on the Save
    Settings button.
    Go to status tab....look for Internet Ip address
    Power cycle the network....
    See if you are able to go online or not ....

  • AAAGGHHH!!! Have WRT54G V8, all lights a go, but cannot detect internet connection

    Any help is a Plus!!! Just bought my wife a WRT54G V8 router from Best Buy. The thing is less than 2 weeks old. Have yet to figure how to set it up. I have ran the CD, it gets to about %89, stops and says "Cannot detect internet connection, ck cables and try again". Have went through the speal w/the phone self help setup, downloaded the instructions from the Liksys support site, and set on hold for about 30 minutes before getting sick of waiting for help. I don't have a firewall other than the Windows firewall, my DSL service is through Verizon (MSN). When the router is hooked up I can't sign on to the internet at all. If I unhook the router and hook the modem back into the computer it works fine. I am at a loss, Please Help!!!

    melsky wrote:
    check first what is your ip when you are connected straight to your modem
    if it is 192.168.1.1, disconnect the modem from the internet port of the router
    turn the router off wait 10 sec. then back on
    with the pc connected to e.g. port no. 1 on the router, open internet explorer, on the address bar type in 192.168.1.1 - uname  none/blank  password admin
    then on set up look for local ip address change that to 192.168.2.1
    Melsky, this is a very confusing post.You say to check the ip you get when connected to the modem, if it is a 192.168.1.1 address then disconnect the modem from the internet port of router.
    First, you would never get a 192.168.1.1 address from the modem. If the modem has a built in router or just a dhcp server IT would most likely be 192.168.1.1 so it would not assign that address to anything else.
    Second, you say to check ip directly connected to modem, but then you say to disconnect the router if the address is a 192.168 address. If they connect directly to the modem, the router is already disconnected.
    Very confusing.

  • TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

    Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
    This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
    1. The phone charges it's battery
    2. I can open it in My Computer and import/export media files.
    In iTunes
    3. It start to sync until step 3 then stops.
    4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
    I hope you can provide me a solution for this problem.
    Thanks,
    Ralph

    Hi ralphagir,
    Welcome to the Apple Support Communities!
    For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
    Safely disconnect iPod
    http://support.apple.com/kb/HT1853
    Have a great day,
    Joe

  • I cannot detect my wireless hp desk jet 3520 printer, I cannot detect my wireless hp desk jet 3520 printer

    I cannot detect my wireless HP desk jet 3520 printer from my iPad? 

    I can't find an Arris router with that model number, are you sure it is not a TG862?
    Regardless, Arris routers are known to either be incompatible with Bonjour or have problems with Bonjour packets hence Airprint will not work. Check with Arris' website and see if there is a firmware update availble for your router for Bonjour/Airprint compatibility and install it or switch out your router.

  • Why won't my vi run outside of the LV2011 project explorer?

    I've created a LV2011 project. The vi's within this project open executables to perform measurement functions. When I open the vi's from within the project explorer window the executables open with no issues. However, with the LV project closed and opening the vi's from "windows explorer" the executables won't launch. It seems like I need to have the LV project explorer window open. However that does not work very well in a manufacturing environment. What is the dependency relationship of running vi's in or out of the LV project? How can I remove this dependence?

    crossrulz,
    Good point.  Nice to run executables and I agree.  In a perfecct world thats what would happen.  Do you know what the constraints are for vis in a LV project?  Here is the error:
    Error 1172 occurred at Error calling method Class.Initialize, (System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
        Inner Exception: System.Runtime.InteropServices.COM Exception:  An error has occurred in the vi. More information may be available in the Windows Event log.
    Creating vi)
    Possible reason(s):
    LabVIEW:  A .NET exception occurred in an external assembly. For information about correcting this error, copy the following exception (in bold), and search the Microsoft Developer Network (MSDN) Web site or the Web for a possible explanation.
    System.Runtime.InteropServices.COM Exception in Open apps.vi->Example.vi
    Attachments:
    Open Apps.JPG ‏45 KB

  • When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased music not on this iphone" it tells me "All of your a

    When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased > music > not on this iphone" it tells me "All of your available music has been downloaded to this device." However, my purchases are not yet downloaded to the iphone and not available to download. If I go to "purchased > music > all > recent purchases" it will show me the purchases that were most recent the last time I synced my phone, but not the purchases since then.
    Any thoughts on how I can remedy this and make all of my purchased music available on my phone without requiring syncing?
    iPhone 4

    So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
    Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
    Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

  • My itunes cannot detect my ipod touch 5g. How do I fix this?

    My itunes cannot detect my ipod touch 5g. How do I fix this?
    All I know is that my itunes has not been updated. If this is the problem, I tried to close and reopen the program but the "update" popup isn't popping up anymore and I'm not sure where I can manually update it myself.
    Please help!
    Thanks

    The 5G (iOS 6) require 10.5 or higher
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later7 (free download from www.apple.com/itunes/download)

  • Office Network cannot detect MBP

    Hi,
    My office is using Windows Server. I managed to connect to my server drives but the centralised printer and scanner cannot detect my MBP in the configuration setting. Without being detected on the centralised scanner, I cannot scan documents to my MBP.
    Thanks.

    Hi,
    My office is using Windows Server. I managed to connect to my server drives but the centralised printer and scanner cannot detect my MBP in the configuration setting. Without being detected on the centralised scanner, I cannot scan documents to my MBP.
    Thanks.

  • Camera Window pops the message "Cannot detect Camera, Check connection to camera, then retry"

    I have installed Camera Window in my Windows 8.1 laptop. The moment I invoke Camera window, there is a popup which shows . "Cannot detect Camera, Check connection to camera, then retry. I do not have this issue in my iPAD though. Has anyone come across this issue..?Thanks

    zebah_alfred,
    Please make sure you have the latest versions of the software installed by downloading them from our website.  Please click HERE to go to the download page.
     1.  Are you connecting to your computer with a USB cable or over Wi-Fi?
     2.  Are there any other devices connected to your computer other than the camera, aside from a keyboard and mouse of course?
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth

    I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks

    How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
    If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions?

Maybe you are looking for