Project Export Issue CRAW 2.1.3 AP 2.1.2

Today I exported a project out of AP 2.1.2 with CRAW 2.1.3 OS 10.5.5 into a project file. The images were referenced images and I consolidated the images during export. Size of the exported project was appropriate to contain all the RAW referenced files. This library and referenced files are stored on a Drobo, RAID5 system.
When I imported the project into another library (archive drive), there were lots of extra versions and the masters could not be found.
Anyone see this type of problem? I have done similar processes in the past without difficulty.

Same thing happens if the masters are reconsolidated into the AP library before export.

Similar Messages

Bizzare export issue

Here is a very weird export issue. Windows XP.
Project is set at h264 1920x1080 mono audio 29.97 fps
I have 30 shots that make up the sequence. Each shot is exactly 90 frames. I exported each sequence at h264 1920x1080 with one channel of audio. The first shot exports just fine and is 5 MB. The second shot exports at 10 MB. The third is 15 MB, the tenth shot is 50MB. But the picture is still 90 frames for each shot. BUT, when I export without audio each exported file is just 5 MB. If I look at the properties of each clip the duration of the video and audio is just 90 frames. If I open one of these clips in QuickTime Pro and re-export it as source then the files size goes back to 5 MB; same video, same audio yet with the correct file size.
Anyone seen this before?
Is there a setting that could be incorrect?
-cablet

Weird, man. Not sure what might cause that.

Slow export issue to 8bit uncompressed with a particular timeline.

I have one particular project (<5 min duration) that just takes forever (3+hours) to export to an uncompressed 8bit NTSC QT movie, whether or not I make it a reference movie or self contained. It also takes a long time to render certain clips within the movie.
If I export the same timeline using "current settings" instead of the 8bit uncompressed it exports in a matter of 3 minutes.
I have no such slowness issues exporting other projects to 8bit uncompressed so I know it's not hardware limitations.
I'm guessing it's not bad render files on the presumption that QT would have been re-rendering everything to make the self contained uncompressed movie- hence my existing render files status wouldn't be a dependency of the process. Please correct me if I'm wrong.
I did notice however that the opening bumper clip takes a long time to render.. like 2 full minutes and it's only about 5 seconds long. This was a .motn file originally. I've used the same clip in other projects without issue.. maybe it's become corrupt? I'll answer back if that was it. Not in the editing room at the moment- but just thought I'd ask in case these symptoms spark any obvious solutions.

You should render prior to export. Otherwise you end up with your system going thru the work to render, but afterwards, you don't have anything in your sequence rendered.
The presumption that QT would have been re-rendering everything to make the self contained uncompressed movie
Nope - it doesn't re-render unless it has to. Exporting in a format other than your timeline's format is a transcode. This does not require a re-render.
You should be using Export Using QuickTime Conversion to transcode. Export Quicktime Movie is meant to use Current Settings...
Patrick

Error in jdevelper 11g when opening a project exported from bpm studio 10.3

Hello I hope someone can help me with this error, thanks in advance.
I installed soa suite 11G (including ps2) but when i open a project exported from bpm studio 10.3 i have the following error.
"An unexpected severe error has ocurred in jdeveloper"
Performing action JDeveloper Forum[ from oracle.ide.log.MessagePage ]
Performing action About[ from oracle.ide.log.MessagePage ]
Invoking command: [ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.bpm.fusion.ui.editor.FusionEditor ]
Performing action Open...[ from oracle.ide.ceditor.CodeEditor ]
Performing action Close All[ from oracle.ide.ceditor.CodeEditor ]
Performing action Import...[ from oracle.ide.navigator.ApplicationNavigatorWindow ]
Jul 15, 2010 1:36:03 PM oracle.bpm.project.io.serializers.model.bpmn.BPMN20Loader load
SEVERE: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
......................... .... >
javax.xml.bind.UnmarshalException: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
<{http://www.omg.org/bpmn20}userTask>

Hi,
I have the same error. Please if you have the solution or any workaround, i 'll very appreciate if you post it here
Thanks in advance!

Develop a Integrated Report of Program and Project Risks, Issues and Opportunities from Project Sites

Does anyone know if it is possible to create an integrated report of all program / project risks, issues and opportunities as identified on project sites? We plan on having our project teams identify and manage these on their project sites but would like
to ability to roll this information up into a report for management review. Need to know if this is possible and how it might be done. Thanks.

Hi,
are you asking for a Reporting Services Report? You can find this information in Reporting DB (2010) resp. schema dbo for reporting (2013).
Here a simple query:
SELECT PROJ.ProjectName
, ISSUE.Title AS Issue
, RISK.Title AS Risk
FROM dbo.MSP_EpmProject_UserView AS PROJ
LEFT OUTER JOIN dbo.MSP_WssIssue_OlapView AS ISSUE ON PROJ.ProjectUID = Issue.ProjectUID
LEFT OUTER JOIN dbo.MSP_WssRisk_OlapView AS RISK ON RISK.ProjectUID = PROJ.ProjectUID
Or are you looking for something different?
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Need to get this project exported asap (CS6 (6.0.2)) (all details provided)

Been working for a while with a slow workflow, I didn't feel like I needed to upgrade anything, because I always got the work done (somehow)..
The file size is close to 900 MB, but there is no way I'll be able to get this project exported in a good quality (with low/average settings it freezes 5% in).
I'm going to get a new machine in the near future, but this project need to be delivered now. What steps shall I take? Thanks

ATI Radeon HD 4670 256 MB
Mac OS X Lion 10.7.5 (11G63b)
Yes there are a few open gaps (intended, can be filled by "black videos" obviously- will that help?).
No third party effects.
Several effects have been applied. Too many to mention ("transform", "mirror", color changes, contrast changes etc).
I can render and export each nest separately. I think the encoder "gets overwhelmed" when it has to read the whole project (which is why I think it will be useless to try to get a proper result with my current system). Thanks

Crystal JRC PDF Export Issue

We are experiencing a PDF export issue with Crystal JRC version 12.2.202. The PDF report shows 1 of 3 pages but ONLY the first page is generated. When this occurs, ALL other users that are exporting to PDF experience the same issue with any multiple page report. I can't find any errors in the log that would indicate what the problem is. To resolve the issue, I have to recycle the WebLogic application server that hosts the JRC, which would indicate something gets "locked" in memory and gets cleared when the app server is bounced.
Any ideas on how to resolve this ?

Hi Ted,
Thanks for the response!
Though, the mentioned Sun JVM Bug explains the root-cause, the Bug status also state that it is not fixed yet.
Also, we are reluctant to change the JVM Option to -Xint due to unknown impacts on JVM optimizations.
Is there a patch released for CrystalReports to deal with this behavior? We are using CRJ runtime 11.5.7.620 and seeking for a patch on this version.
Thanks.

PP CS5.5 FLV To MP4 Export Issues / Problems

I just upgraded from Production Premium CS5 to CS5.5. I do a fair amount of converting/exporting of imported FLV files (downloaded from internet news sites) to H.264/AAC w/ MP4 wrappers using Premiere Pro (PP) and Adobe Media Encoder (AME). My equipment is a 1+ yr. old HP Win 7 Pro w/ an Intel i970 Quadcore, 12 Gb RAM and MSI nVidia GTX 470 GPU. I have never experienced any queue or export issues w/ CS5 (at least that I noticed), but I am experiencing noticeably degraded queue export and direct export problems with these files in CS5.5.
Description: (1) The queue export times for the exact same imported FLV clip(s) using the exact same sequence settings and H.264/MP4 export settings are noticeably slower in CS5.5 (sometimes 2x, depending on the export settings, e.g. using maximum render quality) than in CS5; (2) My MSI Afterburner GPU monitoring software indicates 5-10% GPU usage during queue/export in CS5, while indicating 0% GPU usage (flatline) in CS5.5; and (3) When I attempt to direct export these files using CS5.5 I get the following error message: "The source and output audio channels are not compatible or a conversion does not exist."
I suspect that it may have something to do with "conforming" anomalies when the FLV file is imported into PP, but I would put that squarely in the category of rank speculation on my part.
Has anyone experienced the same or similar problems or have any insight into what may be the problem(s)? Of course, thanks for any help/insight you can provide.
Jim

What do you mean by a better routine?
A better compression routine than H.264.
Is the quality better than H.264?
Yes.
Does this use an MOV wrapper?
Yes.
Also, would it import correctly into PPro?
Yes.
we would import files into PPro exported out of FCP and would get a red pixelated glitch during preview and export. Does this codec solve this problem as well if it is an MOV wrapper?
I don't know anything about FCP.
Sorry for all the questions, just want to get things right before diving into a new codec.
It's harmless, and free.
Download it and run some tests.

Simple flash export issue

hello
I'm trying to export a flash video using Adobe media encoder from Premier Pro, but when I do I get this error " there are no clips to build".
I have another file that I am able to export and it does not have this problem.
They are Windows Media files and play in Premier fine. I am using Premier Pro CS3.
Lastly, I'm not a video expert but I really need to get these up on the web for work, there is a lot of pressure and I need to get it done.
Regards,
Tom

fixed the exporting issue.

Why won't my iMovie project export on my iPhone 6

Why won't my iMovie project export on my iPhone 6. I made the project but it won't export and the load bar doesn't move.

Apple no longer includes iDVD with new Macs. For some alternatives, see this post.
https://discussions.apple.com/docs/DOC-3711

[svn:bz-trunk] 18389: Eclipse Project Classpath issues:

Revision: 18389
Revision: 18389
Author:   [email protected]
Date:     2010-11-01 03:49:03 -0700 (Mon, 01 Nov 2010)
Log Message:
Eclipse Project Classpath issues:
- Fixing class path entries.
- Instead of jars pointing to the actual projects.
Modified Paths:
    blazeds/trunk/development/eclipse/projects/java/blazeds-proxy/.classpath
    blazeds/trunk/development/eclipse/projects/java/blazeds-team.war/.classpath

Figured out that it was failing while building a product for MacOS. I updated Tycho to use version 0.15.0 and all work well.
For more information on the bug (case sensitive file systems) see:
bugs.eclipse.org/bugs/show_bug.cgi?id=349877

Exporting ISSUES! Help

I am a relatively new user to lightroom. I haven't had any exporting issues until today. I am attempting to export a photo/photos to a specific folder with a custom name. When I do this it exports the WHOLE library and NOT the edited photo. What am I doing wrong??

Lightroom usually exports all images that are highlighted. If you only want to export one image then make sure it is the only image that is highlighted.

Find Project From Issue?

Hi , I want to find project from Issue ? I have Issue guid number and ref guid number but ı am not finding project ?
thanks for helps .

This is PC
Got the (ANSI-Latin 1) down. We have a project that in D10 we
had to localize in Russian. Problem is that D10 did not support
that code to display Russian correctly when working within D10.
This support is in D11.
So if I understand you correctly D10 is in ANSI-Latin 1. This
is confusing cause when we upgrade the files it defaults to some
Turkish code page. Does D11 auto read this formating when upgrading
the files and if so should we be allowing the default or should we
be telling D11 to use ANSI-Latin 1?

Exporting issues after 4.2 upgrade

Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

Are you using an Export preset, or setting the Export up manually each time?

Reporting Export Issue from Taleo

Can anyone help? We have a work around for the Exporting Issues into Excel 2010 regarding figures and dates only reading as text, however, a new issue has arisen. In one field we have Aggregated Agencies assigned to any particular Job Code. In the legacy reports, every agency name exported into one cell in Excel, now they export into individual rows, this causes a report to be too long and there is no way to amalgamate them into one cell. Has anyone found a workaround for this?

is there someway that it was reformatted by the Iomega drive being daisy chained to it?
No. That is not possible -anyway, reformatting erases everything on a drive.
You would have noticed that first.
You can download the [NTFS-3G driver|http://macntfs-3g.blogspot.com> which will let you read, write and even reformat the clients drive as NTFS on the Mac. All reasonably modern Windows PCs work with this disc format and you won't run into the file size limitations associated with FAT formatted drives.

Project Export Issue CRAW 2.1.3 AP 2.1.2

Similar Messages

Maybe you are looking for