Project file conversion kills project

Trying to open a project in CS5.5 that was created in CS4 (or 5)... it says it will convert and not modify the project. But the Sequence and Timeline comes up totally blank! Any help?

Okay. Well, this scenario is happening for me in After Effects CS 5.5 when I attempt to open on an ".aep" from CS 3.
The text in the pop-up window is:
All I end up with is an EMPTY untitled project workspace. All of the files/media from CS3 are in a single folder where I open the ".aep" file with AE CS 5.5
Any ideas?
Barry

Similar Messages

Large file conversion

Has anyone out there had to deal with a large file conversion, i.e., the data to be loaded into R/3 is very large, too large to fit in an Excel file. Originally we suggested to the conversion team to put their data in an Excel file and we would flag all the records that were not loaded so they could find them easily and correct the data. However, now they tell us the number of records is too large for an Excel file and they DON'T want to split the file up into manageable pieces.
They also don't want to use a BDC session to correct the errors.
Any sharing of past experiences would be appreciated.
Thanks.
Nic

Depends on the skills in your team perhaps; when we've hit Excel limits in the past then Access has been the next tool of choice (often because it's already installed on the desktop). This means you could, if you wanted, knock up a bit of RFC code in Access VB and + a "Call Transaction" function module in ABAP to do the file conversion, and they could correct any fails / bad data from within the Access system. It's not going to perform as well as an ABAP with the usual "<i>load dataset into memory, do lots of call transactions, write the errors to a BDC session</i>" though (and run times could be critical to your project).

Advice needed - .vob file conversion for playing on itouch

help needed and advice on best application for dvd/movie file conversion.
i want to convert .vob file so i can transfer to ipod.
seems like there are several free & pay for app's out there - any guidance as to which is the best would be appreciated.
thanks in advance

chriswalsh wrote:
.. i want to convert .vob file so i can transfer to ipod.
haven't tried for vob, but a nice lil' tool:
http://thelittleappfactory.com/evom/
another well-known converter, esp for DVD>>Apple-toys-usage is
http://handbrake.fr/ (don't worry, english spoken)
note to Mods: the latest version is NO ripper (=DRM-override), but a converter..
both free, no additional installs needed..

Sender File Adapter with file conversion

Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 <b>value2</b> value3
I want to ignore <b>value 2</b> but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.

hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Sender File adapter File Conversion with key fields

Please help me guys, I already spent way too much time on this!
I checked a couple of BLOGs and I think I'm doing the right thing except I'm not getting the result I would expect.
I'm trying to create an IDoc using the from a flat file.
I get the following error:
During the application mapping com/sap/xi/tf/_MM_TEST_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~
The Source file is this:
H
L0015
The file adapter does create the XML below (looks fine):
<ns:MT_SINGLE xmlns:ns="http://PPSC_TO_BO_INVOICE">
<HEADER>
     <ID>H</ID>
</HEADER>
<LINE>
     <ID>L</ID>
     <SITE>0015</SITE>
</LINE>
</ns:MT_SINGLE>
When I test the map in IR, with the XML that this file adapter created (above) it works fine!
Also if I take away the HEADER from the source structure everything works fine and I can create the IDoc, therefore I think something must be wrong in the file conversion, the mapping is so simple there is nothing to fail there.
The file conversion parameters that I have:
Document Name: MT_SINGLE
Document Namespace: http://PPSC_TO_BO_INVOICE
Document Offset:
Recordset Name:
Recordset Namespace:
Recordset Structure: HEADER,1,LINE,*
Recordset Sequence: Ascending
Recordset per Message:
Key Field name: ID
Key Field Type: String (Case-Sensitive)
LINE.fieldNames: ID,SITE
LINE.fieldFixedLengths: 1,4
LINE.keyFieldValue: L
HEADER.fieldNames: ID
HEADER.fieldFixedLengths: 1
HEADER.keyFieldValue: H
What am I doing wrong???
Any help is much appreciated.
Thanks,
Viktor Varga

Hi Viktor,
Basic rules:
1. Down load XML payload(output From Adapter) and test it in IR mapping program. If it is working there is no reason why it will fail in Runtime. Also Check Cache is up to date.
Generally the problem lies with namespace.
Hope this helps
Regards,
Satish

File conversion and append file in receiver file adapter

Hi
I have a batch IDoc -> XI(3.0) -> file scenario with file conversion to create a flat CSV-like file. The problem is that because of the amount of data sent from R/3 (~20000 employees), the idoc is split into several idocs. In my receiver file adapter I want to append all the idocs contained in this data transfer to one flat file, before transmitting to FTP server.
For the next batch transfer (the next day) XI should start all over and create a new file and append all idocs contained in that transfer before transmitting the flat file to FTP server.
Can this be done using the 'Use Temporary File' and 'Append' options in the FTP connection Parameters in the comm-channel?
It is not an option to append the file in the FTP-server, because the files in the destination folder are moved immediately after arrival, so the file will be moved before file adapter can append all the files.
Does anyone have any suggestions to how to solve this?
Br
Kenneth

Hi Kenneth
Did you ever get a solution to this problem?
Regards
Russel Irvine
[email protected]

Adobe XI won't open pdf in windows 7; needs file conversion to encode text. need help!

adobe XI won't open pdf files in windows 7; error msg says it needs file conversion to encode the text. choosing any of the options available still does not open it. please note that the pdf's are attempting to open in WORD. if it needs to open elsewhere, then how to i make adobe open elsewhere every time? thanks!

thank you mike. i tried to follow your shared link to unisntall and re-install the software.
now i can open pdf without any error msg.
however.. the file context cannot be showned... which is in white screen only.. i tried to close and re-open the file, but still can't view the context correctly. could you please help? thanks.

XML file conversion after sender file content conversion

Hi,
I have issue refarding file content conversion.
My input structure is
<MT_RCICrecords>
<TRNH>
<RCIC>
<RECH>
<RECL>
<RCIC>
<TRNH>
Afetr sender File content conversion (csv to xml) it produces xml file as below (since file conversion does not support 3rd level of hierarchy)
<TRNH>
<RECH>
</RECH>
<RECL>
</RECL>
</TRNH>
It does not recognize RCIC.
Now i am trying to map this to IDOC and getting error as
'MT_RCICRecords tag found instead of IDOC BEGIN ='.
CAn anyone suggest me how to chaage this xml output after File content conversion to add RCIC tag in xml file?
I am new to XI so please give me some sample code to.
Thanks.
Yashpal
Its urgent!

My problem is xml generated from content conversion is like below
<MT_RCICrecords>
<TRNH></TRNH>
<RECH></RECH>
<RECL></RECL>
<TRLR></TRLR>
</MT_RCICrecords>
and i want it to be
<MT_RCICrecords>
<TRNH></TRNH>
<RCIC>
<RECH></RECH>
<RECL></RECL>
</RCIC>
<TRLR></TRLR>
</MT_RCICrecords>
which is not happening
My input message structure is
MT_RCICrecords
TRNH
RCIC
RECH
RECL
i hope it is clear now
TRLR

Pdf pack will not create a pdf from a tiff file conversion failure Why

pdf pack will not create a pdf from a tiff file conversion failure Why

Hi David Turner,
What is the exact error message which you are facing while converting the file from .tiff format to PDF format.
As per my knowledge, PDF Pack supports conversion from .tiff format to PDF Format -Different File formats that Adobe PDF Pack supports.
Regards,
Rahul Tyagi

Receiver CC File - Complex Flat File Conversion

Dear forum users,
I want your opinion about the feasibility of the content conversion described below using Receiver CC.
The structure of my file is the following
- A File header segment (FH)
- 1...N Business Object that is described by many segments
- A file footer segment (FF)
Exemple of business Object : Purchase Order :
1 Header Segment (POH)
N Item Segments (POI)
Exemple of file :
FH
POH (PO 1)
POI (PO 1)
POI (PO 1)
POH (PO 2)
POI (PO 2)
POI (PO 2)
FF
Is content conversion standard tool can deal with such a structure ?
Note that in the file created, the order of each segment has a big importance :
PO Items of PO 1 must be after PO Header of PO 1 but before PO Header of PO 2 !
I thnik the structure requested by converter described in documentation do not fit with my case :
<root>...
<nameA>
        <value1>value</value1>
        <value2>value</value2>
        <value3>value</value3>
</nameA>
<nameB>
        <value4>value</value4>
</nameB>
</root>
I should have :
<root>
<FH>
<PO>
    <POH>...</POH>
    <POI>...</POI>
    <POI>...</POI>
</PO>
<PO>
    <POH>...</POH>
    <POI>...</POI>
    <POI>...</POI>
</PO>
</FH>
</root>
Thanks very much for your help and opinions
Jean-Charles.
Edited by: Jean-Charles CARRET on Jan 3, 2011 6:12 PM

Thank you Stephan for your answer.
Firstly, could you confirm whether the "row" elements under the root tag are on the same level than other elements (POH, POI, FF and FH) or not ?
I just check the both following parts of the help documentation called :
- [Inserting MessageTransformBean in the Module Processor|http://help.sap.com/saphelp_nwpi711/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm]
- Using the dispatcher : Example
For me, it is not clear.
1. Do I need to create an external class (XSLT Library for example) to manipulate my XML data before passing it to the standard Flat File Conversion tool ? (Here the manipulation would be to remove the row XML elements)
2. Where is located the famous "Data" directory in which I must put my xsl file ?
Thanks for clarifications.
Jean-Charles

I open a donwloaded file from an e-mail and a file conversion box appears.The characters are all wierd.

I can not open a downloaded file from an e-mail or off the web w/o a file conversion box popping up.It shows options to open with msoffice word but I choose that and it opens with all the characters that are weird looking. There is also the issue where every time I open up Mozzila there are portions of advertisements that look like they are in Japanese. I go to the View in the top bar then select Character Encoding.The unicode is selected so I switch to Western (ISO-8859-1) and everything is normal. I close the browser and restart and it goes back to the way it was with the Japanese looking text.

You can convert the PDF text to regular text (.txt) and then import/open into another program and make your changes, then save the file in the programs format (for your later editing) and then choose Print from the program and there may/may not be a option to save as PDF again.
You'll need a free (limited use) PDF to text utility like
PDF OCR
http://solutions.weblite.ca/pdfocrx/
Trouble here of course is you lose all the formatting and have to reformat, but it's a lot less expensive than Adobe's software.
LibreOffice is free to use and can save as PDF format if iWork doesn't save as PDF, it should unless Apple is really peeved at Adobe.

File conversion is not working

File conversion is not working.

Using online services and it simply times out. I login and upload the file
I want converted and it takes 5 mins or longer and then simply says the
file conversion failed.
I got one file to work, but it took like 12 tries.
Very annoying and it's impossible to call and get a tech person to help.
On Tuesday, February 11, 2014, PECourtejoie <[email protected]

Video File Conversion and Adobe AIR

Hello guys
I want to work on a simple app which will actually convert large size video files to small size video files. It will be a multiformat (and atleast supports .flv)
But i have no idea where to start!
I mean how to achive this file conversion thing.
Any blog, library or resource will be highly appreciated appreciated
Bunch of Thanks

Thanks a lot for the reply
I have not yet tried Alchemey, Is it available to download?
Secondly, I want to do all the conversion locally, So MERAPI might be a good choice, Let me try it
Thanks once again

Acrobat X and File conversion

I have recently purchased a year's subscription to file conversion on my Acrobat X - however, when I try to use it Acrobat seizes up - what to do?

Hi,
Thank you for your subscription to Acorbat Plus.
Please let me know in more details what steps you took and any errors if you have seen during your workflow.
I think you are using Acrobat XI Pro, not Acrobat X.
Thank you.
Hisami

Raw File Conversion

What is better for Raw File conversion, Aperture or Adobe Camera Raw in PS CS2? I'd heard there was more noise in the Aperture conversions. Do people manage their photos in Aperture and export the raw file to PS for conversion if PS is better?

i agree with Paul. it depends on your Camera.
I am a photgrapher and use for most of my work now the Nikon D200. Sometimes Canon EOS-1 Ds mark II. I use Aperture 1.5 and Adobe CS2.
Now i have tested Adobe Lightroom beta4.And I have to say that for the workflow i prefer it over Aperure.
I have made the experiance that a picture with a lot of highlights looked unseable in Aperture , but was good once opend in Photoshop RAW converter. One step further: a picture shot outside, almost in the dark with only some light left from the lamps in the street, looked very bad in Aperture and Lightroom, once opend with Nikon Capture Editor it turned to be a great Picture in full scale size at 300dpi. I guess this is possible because they know exactly how the RAW is processed in the camera and their software is only dedicatet to Nikon. I think it should be the same for all other cameras.The only trouble is that Nikon Capture is very slow. But good work needs time:-)
So my conclusion is to use Aperture or Lightroom to organise and preselect the shoots, as well to make a webgallery for selection to the client.the selectet RAW picture i will then open in Nikon Capture and set the corrections. Then I open it in Photoshop to refine it and retouch. finaly save it as PSD or any other format desired.
There is one programm that I guess does the same high quality work on RAW files for all cameras and that ist Capture One Pro because of its dedicatet RAW conversion to each Camera type. I just dont lik the interface and its another 500 $ or so.
i hope this was ahelp to you.
regards
larry

Project file conversion kills project

Similar Messages

Maybe you are looking for