Project file how to convert into a avi

in a project file there are many files like finale, scene1, scene2 etc.. then how to render that one

It sounds like you are a beginner. You have to go through some training materials or you will never figure it out.
https://helpx.adobe.com/after-effects/how-to/add-effects-motion-graphics.html

Similar Messages

How to convert audio only avi to wav?

How to convert audio only avi to wav?
Can I extract only the audio from an avi and insert in to a wav file?
Regards,
Achi

Sure.
You just need to program a Processor to turn off any video tracks, transcode to a WAV-acceptable audio encoding, and then use a DataSink to store the output of the processor as a WAV file.
Also, I bet the following sample program will do it without any modification...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/Transcode.html]

HT3823 may I known, my itunes song is ACC file how to convert to WAV file

may I known, my itunes song is ACC file how to convert to WAV file

Here's a free online file converter I use all the time: http://www.convertfiles.com/
And don't you mean AAC, not ACC? lol

How do I move just a single clip in the project file and then convert that into an Mp4 format?

Dear Assistance,
I have a project file open.
At the bottom of the screen there is a horizontal film strip of images. I have cut the images into certain segments.
I want to select one single segment (about 1 min long) and convert only that selected segment into a mp4 format?
Kindly inform me how the best way to go about doing that is.
Thank you,
Ben
[email protected]

In the sequence you will see the time code and a bar in line with it.
At the end of all your edited clips in the sequence you will find that the bar ends, this bar defines the work area.
Drag each end of the work area bar so it covers only the clip you want to export.
The select the exporter and select the preset you want and before you start the export where it says whole sequence change this to work area
Then change the default name and location to whatever you want and start the export, job done

How to convert mov to avi or wmv

Hello,
I just caught a short 30 second clip of my son crawling for the first time with my Canon camera. I want to send the video to my Mom via email however the file is too big. Her computer does not play mp4, which is the only conversion option I found, and walking her through installing a compatible player is useless. So I would like to find out how to convert the mov file to avi or wmv, small enough to email. I just purchased Premiere Elements 10 and never used it. I could not figure out how to do it, so if anybody knows, that would be great.
Thanks.

>just purchased Premiere Elements 10 and never used it
Online User Guide http://helpx.adobe.com/premiere-elements/archive.html
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1137128
-Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
-Sharing for Movies http://forums.adobe.com/thread/1051093
-Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips

Sysdate - how to convert into a certain format

Hi,
I am trying to use sysdate as a default parameter in one of my reports and getting an error message (ORA-01843: not a valid month)...
my sysdate is coming up in the following format (DD-MMM-YY) and is giving an error message... but when I tried the date manually in following format (MM/DD/YYYY) it worked...
may I know how to convert sysdate into the following format MM/DD/YYYY
thanks in advance

my sysdate is coming up in the following format (DD-MMM-YY)
There is no "MMM" format model. And how often does it have to be explained that 2-digit year formats are just wrong?
Suggest you post the query or expression that is causing the error. Generally there is no reason to convert <tt>sysdate</tt> away from a <tt>DATE</tt> type for anything other than display purposes. It is more likely that the error is due to an implicit conversion of another value to <tt>DATE</tt> using a non-default or incorrect format mask.
Also post the result of running
select * from v$nls_parametersin the SQL Workshop.
Edited by: fac586 on 13-Jun-2011 18:00

How to convert into columns rows

Hi all,
How to convert columns into rows.
thank you
regards
P Prakash

Whats your DB Version. If its 11g and above you can check out PIVOT and UNPIVOT clause of SELECT statement. Its a new feature of 11g.
For previous version just search this forum you will get lots of examples.

Storage Captured DV footage in external drive not contained in Project file - How?

How do I store captured DV tape footage in an external drive without being in a Project file?

You could use another program, to do the Capture.
What is the material, that you wish to Capture?
What camera produced it?
What is your OS?
With that info, someone can likely give you a link to a program, that will work for you.
Good luck,
Hunt

Help! Clip and project files refuses to load into imovie

I did some reorganizing of my movie material placed on an external hdd (I am using a macbookpro 13).
Now imovie refuses to load any of the files again. The project files are greyed out an impossible to import. All the source files are also still there on my external hdd but imovie refuses to load them. What shall I do? Anybody that can help me? Extremely frustrating. Must I move the material or have it in a certain order in the folder system?

I have the same problem as the user who started this thread - moved my imovie projects to an external hard drive using the finder window, did not move them in imovie. Is there any way will be able to view them again in imovie??? I thought maybe they needed to be in the internal hard drive for some reason, so I tried to move them back to "Movies" in my internal HD, but it didn't work either. Please tell me there's a way to recover my projects!

Premiere elements 2.0 how to convert mpeg to avi PLEASE HELP

Here is my problem, I am putting together a hi light video for my sons football seasons. Most of the seasons I have videotaped myself. When I capture the video in Elements it creates several avi files that I can pick and choose from, each file is created from when I pause during recording. I have one seasons worth of videos where I was not the one taping. I have dvd discs that the guy taping gave me. I can put the dvd file into elements and even put it in the time line but it shows up as one long clip....not segmented. It is also an mpeg file. I can use the razor tool to segment it in spots but have no way to convert the file within elements. When I save the project it still stays as one continuous mpeg file in my adobe folder regardless of whether or not I segment it with the razor tool. Oh, and if I haven't made it clear yet I am an Elements idiot. How can I get the files off the dvd to use in the manner in which I need to use them????? Do I have to use a seperate program to make them avi files?????

<[email protected]> wrote in message<br />news:[email protected]<br />> Here is my problem, I am putting together a hi light<br />> video for my sons football seasons. Most of the seasons I<br />> have videotaped myself. When I capture the video in<br />> Elements it creates several avi files that I can pick and<br />> choose from, each file is created from when I pause<br />> during recording. I have one seasons worth of videos<br />> where I was not the one taping. I have dvd discs that the<br />> guy taping gave me. I can put the dvd file into elements<br />> and even put it in the time line but it shows up as one<br />> long clip....not segmented. It is also an mpeg file. I<br />> can use the razor tool to segment it in spots but have no<br />> way to convert the file within elements. When I save the<br />> project it still stays as one continuous mpeg file in my<br />> adobe folder regardless of whether or not I segment it<br />> with the razor tool. Oh, and if I haven't made it clear<br />> yet I am an Elements idiot. How can I get the files off<br />> the dvd to use in the manner in which I need to use<br />> them????? Do I have to use a seperate program to make<br />> them avi files?????<br /><br />If you want to subdivide a file on the timeline in APE 2:<br /><br />(1) Move the Work Area markers on the timeline to include just the portion <br />you wish to export as a separate file.<br /><br />(2) Go to File, Export, Movie<br /><br />(3) In the Settings Window of the Movie Export dialog select: Range, "Work <br />Area Bar"<br /><br />(4) Save the file with the desired name.<br /><br />Repeat as desired to create separate segment video files for each segment <br />you wish to work with separately.<br /><br />When you are all done creating the segment video files, start a new project <br />and assemble the files as desired.

XML file in the form of .config file how to convert it to class and store it in single object

Hi,
I have a config file in which i have to convert it to class and get an object.
example:
<?xml version="1.0" encoding="utf-8" ?>
<xyz xmlns="">
<Container name ="Basic">
<Connectivity user="" server="" protocol="udp"/>
<Connectivity user="" server="" protocol="udp"/>
</Container>
<Container name ="Cp">
<settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
<domain name="audio">
<section name="headset">
<setting name="audio_in_agc_enabled " value="1"/>
</section>
<section name="incoming">
<setting name="use_agc" value="1"/>
</section>
<section name="vad">
</section>
</domain>
<domain name="system">
<section name="qos">
<setting name="audio" value="tos 46"/>
</section>
<section name="dtmf">
<setting name="force_send_in_band" value="0"/>
<setting name="minimum_rfc2833_play_time" value="40"/>
</section>
<section name="network">
<setting name="dtx_enabled" value="0"/>
</section>
<section name="diagnostics">
<setting name="enable_logging" value="1"/>
<setting name="log_level" value="Error"/>
</section>
<section name="general">
<setting name="add_OS_version_to_user_agent_header" value="1"/>
</section>
<section name="indialog_notify">
<setting name="enable_indialognotify" value="1"/>
</section>
</domain>
<domain name="rtp">
<section name="2833">
<setting name="enabled" value="1"/>
<setting name="packet_time_in_ms" value="60"/>
<setting name="payload_number" value="101"/>
</section>
<section name="inactivity">
<setting name="timer_enabled" value="0"/>
</section>
</domain>
<domain name="proxies">
<section name="proxy0">
</section>
<section name="proxy1">
</section>
</domain>
<domain name="ggg">
<section name="device">
<setting name="use_headset" value="1"/>
<setting name="rrr" value="1"/>
<setting name="eee" value="480"/>
<setting name="eme" value="hhh"/>
<setting name="headset_name" value="vvv"/>
<setting name="manual_audio_devices_configure" value="0"/>
<setting name="audio_in_device" value=""/>
<setting name="audio_out_device" value=""/>
<setting name="ringer_device" value=""/>
</section>
<section name="system">
<setting name="export_settings" value="EndpointSettings.xml"/>
<setting name="enable_export_settings" value="0"/>
<setting name="log_level_AbstractPhone" value="0"/>
<setting name="log_level_Audio" value="0"/>
<setting name="log_level_Auto Configuration" value="0"/>
<setting name="log_level_CCM" value="0"/>
<setting name="log_level_Conferencing" value="0"/>
<setting name="log_level_Contacts" value="0"/>
<setting name="log_level_DNS" value="0"/>
<setting name="log_level_GUI" value="0"/>
<setting name="log_level_Jitter" value="0"/>
<setting name="log_level_Licensing" value="0"/>
<setting name="log_level_Media" value="0"/>
<setting name="log_level_Privacy" value="0"/>
<setting name="log_level_RTP" value="0"/>
<setting name="log_level_STUN" value="0"/>
<setting name="log_level_Security" value="0"/>
<setting name="log_level_Storage" value="0"/>
<setting name="log_level_Transport" value="0"/>
<setting name="log_level_USB Devices" value="Info"/>
<setting name="log_level_Utilities" value="0"/>
<setting name="log_level_Video" value="0"/>
<setting name="log_level_Voice Quality" value="0"/>
<setting name="log_level_XMPP" value="0"/>
<setting name="log_level_Endpoint" value="6"/>
</section>
<section name="beeptone">
<setting name="play_locally" value="0"/>
<setting name="enable_beeptone" value="1"/>
<setting name="beeptone_file" value="beep.wav"/>
<setting name="beeptone_timeout" value="30000"/>
</section>
<section name="dtmf">
<setting name="play_locally" value="1"/>
<setting name="pause_start_stop_dtmf" value="100"/>
</section>
<section name="control">
<setting name="auto_answer" value="0"/>
</section>
<section name="ctrol">
<setting name="auto_ans" value="0"/>
</section>
</domain>
</settings>
</Container>
</xyz>
Please help me out in creating an object from it.
Thanks,
Hiranmayee

It's one of those things you usually start from the other end.
IE with a class and then serialise / deserialize to xml.
Because you have a namespace in there:
<settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
I think you will find linq to xml will have issues with that.
You could still use xpath to pick data out of there and there's been a thread on the c# forum recently which is relevent:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2dc0581e-f2fd-4fd3-89ee-e59280c398e6/read-xml?forum=csharpgeneral
Why do you want to turn that into an object?
By the way.
This isn't a wpf question and you should probably have posted it on the c# forum.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

S_ALR_87012078 - How to Convert into ALV

Sir,
My client want to down load the data or report :- { S_ALR_87012078 - Due Date Analysis for Open Items (Vendors)} in DAILY INTERVAL FORMAT .
Hence, How can I convert this report into ALV report .
i.e..
Daily intervels
Vendors I 0-30 I 31-60 I 60-90 I 9 0-120
100001 I
100002 I
100100
Thanks & Regards

Hello,
There is no ALV grid control here.
However, you have three selection options:
Graphical
Classical
Object Lis
When you say for example in graphical format: Report ==> Export, again you have three options:
Copy report to XXL, Copy page to XXL, Object list.
Additionally you can also do HTML export.
However, this report will not give you number of day you want like 0-30, 31-60 etc.
For that you need to develop your own:
Hello,
Note that if you are on classical GL, you cannot have profit center on vendor or customer line items.
If you are on new GL and document splitting is active then you can have profit center on customer or vendor line items.
The following example I have given is for customers.
The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
For Customer you go to FDI4, for vendor you go to FKI4 for forms.
Remaining all are the same.
Go to transaction code FDI4
Select Form Type RFFRRD20 Line item analysis
Give your form name and description
Structure (Two axis) - as defaulted
Click on Create
You will have lead column
Delete the rows 2, 3 and 4
Double click on column 1
Enter the customer numbers from 1 to 999999
First column double click (A)
Slelect following values
Due date analysis 1
Days for net due date 0 to 30
Give the short name, medium name and long text for the column.
Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
You prepare one more column with
Due date analysis 2 (G)
Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
Characteristics you need to select are
Account Type (Select Account Type as D for customers)
Currency
Customer
Document Type
Special G/L Ind
Company Code
Change the output types and options according to your requirement.
Refer FDI2 and FDI3 for other standard reports created.
Refer FDI5 and FDI6 for other standard forms created.
Save your report and execute.
Regards,
Ravi

Can't import .mov file how to convert it

Hi Guys
I have been sent ten .mov video files which i can open it in quick time but can't import into imovie 09
I have tried to re-save in quick time but didn't make any difference, the files are still not able to import, also the person who sent them labeled the files with a / in the name I changed this but still made no difference,
the properties are
H.264, 320 x 240, Millions
AAC, 2 channels, 32000 Hz
FPS: 12
data size: 474 KB
data rate: 198.26 kbit/s
current size - 478 x 359 pixels
I want to be able to import them all into imovie 09 so I can edit them and join together, can you recommend a reliable free software that I can do this.
Any help would be greatly appreciated
Thanks
P

Thanks so much for the great advice, I downloaded mpeg streamclip and I have been playing around with converting my video.
There are many different options and I have tried a few but the quality of the picture is slightly pixelated. Can you advise me about the best option to use to get the best quality picture.
I want to be able to edit it in imovie, so I was exporting it to quicktime but there are many other options which would you recommend?
When I exported it to quicktime I tried the following options
I have tried compression -
Apple motion jpeg A
png - sound played but picture was frozen and didn't play
Tiff - same thing as png
but there is an endless list and I'm not sure what it all means.
There are also many different frame sizes, I use (4:3) in imovie but it also had a 320 x 240 unscaled I'm not sure what this means?
Are there any other options/boxes I should be altering/checking?
Sorry for asking so many questions.
I'm not really very familiar with all these terms, it's a completely new language to me.
Any advice would be really appreciated
Thanks again for helping me out : )

How to convert into INR

Hi all,
I created a program to run a report,in one column we need to fetch data from export invoice and amount is in foreign currency.
we need to convert foreign currencies to indian currency and display in report. <removed by moderator>.
Edited by: madhu ms on Sep 6, 2010 8:41 AM
Moderator message: currency conversion questions = FAQ, please search before posting.
locked by: Thomas Zloch on Sep 6, 2010 9:29 AM

Hi friend,
It will save time when you search before posting.
thanks,

LAB gave us a Binary LUT file, how to convert from LOG dpx to Linear space?

Hello,
We did a Digital Intermediate and we have the data as LOG dpx Image Sequences.
The Production House gave us a Binary LUT file, but refused to give it to us in a Readable Format.
Is there some way I could covert from the LOG file to a corresponding Linear file that I can use to make DVD's etc?
Are 3D LUTs readily available that I can try out? Where can I find them?
Thanks in advance for your reply.
Regards,
Rajnesh
G5 Mac OS X (10.4.5) Dual Proc 2.7GHz; 8GB Ram

Hi,
Its good that u pasted the complete log file. In your environment you have to run this upgrade tool only once from any of the middle tier.
And with respect to your error that u got in precheck is quite simple. All u have to do is just run this script from by connecting to portal schema using sqlplus.
Run dropupg.sql
Location-------- /raid/product/OraHome_1/upgrade/temp/portal/prechktmp/dropupg.sql
Later you re-run the upgrade tool and let me know the status.
Good luck
Tanmai

Project file how to convert into a avi

Similar Messages

Maybe you are looking for