Project File made a few days ago now won't open anymore in Premier Pro 8.0
I have been working on a project for several days now, but now it spontaneously stopped opening for no reason. I have the latest version of Premier Pro, the computer hasn't been modified nor used in these days outside working on this project and source files haven't been altered or changed either. Other projects created at the same time open fine. The auto save however didn't work either, our of 20 autosaves the only one that's working is the first save and the 17th save.
Anyone have the same problem or suggestions to fix this?
I am running Word for Mac v 14.2.0 quite happily on my iMac 27" running Maverick 10.9.4.
Possibly it is due to issues with your Retina screen? The obvious first step is to update Word to the latest version.
Virus attacks are not the first guess on a Mac. I have never ever had one nor even been able to locate any malware for well over a decade. Word can harbour Macro viruses but I thought that the Mac version of Word didn't do macros.
Either way this is not the place to get your answers. Pages is not Word. Use Microsft's support forums for their software.
Peter
Similar Messages
-
Just bought MacBook Pro a few days ago, iPhoto won't open
Whenever I click on the icon, it says that my library needs to be upgraded to work with that version of iPhoto.
Do I have to buy iLife 09 or something for it to work?
I just switched from a PC to a Mac, and I am very confused.Make sure that your boot drive is selected as the Startup Drive in System Preferences. What you describe is very unusual behavior. If your Startup drive is selected in Preferences, try booting to your Recovery partition (holding down Command and R on startup) and using Disk Utility to verify and, if needed, repair your hard drive.
If this doesn't help, you may have to take your MBP to your local Apple Store or an AASP.
Clinton -
HT4623 I updated my ipad a few days ago now it won't connect to safari and won't update any apps
I updated my ipad a few days ago now it won't connect to safari or update apps
I updated my ipad a few days ago now it won't connect to safari or update apps
-
I opened iTunes and the cloud is not syncing up, so i cannot watch movies or tv shows over the cloud through itunes, however it was there a few days ago, now randomly gone.
Are you sure you bought and not rented them? Renting lets you to access the video for up to 48 hours.
-
messages in macbook pro is not working, a few days ago it was running just fine, now it claims non of my current contacts have an imessage account and messages cannot be delivered, i did updated the software recently and it asked me to re accpet terms and conditions, i dont know if it has something to do with it, any help??
The iMessage and Facetime servers are down for the day. People have been having issues since this morning. I called Apple myself and they told me to just wait until this evening and try again but warned that could not be fixed until tomorrow.
Wait until then and see what happens. You can always call Apple and get a direct update if you still have issues and think it should be fixed.
Regards, -
After latest update a few minutes ago, Firefox won't open any web pages.
I was on a local web page run by a local server on my intranet. Firefox was not open. I opened it (the last time it worked successfully was a few hours ago). It did an update. After the update, it tried to open a Firefox web page - that failed. The local web page I was on would not open either. The web pages still work from Internet Explorer.
Can you start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can try to reinstall Firefox.
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
This is the message when I Open Firefox:
"You're not on the latest version of Firefox. Upgrade today to get the best of the Web!"
At <Help> & <About Firefox>, it shows
Firefox
9.0.1
"Firefox is up to date"
"You are currently on the release update Channel"
One of those messages must be wrong. Either way Firefox seems to work fine otherwise. Thanks and regards, Peter SpielmanIs your homepage set to www.google.com/firefox? If so, that page is wrong. You should change your home page to about:home or some other site instead. The google.com/firefox page is no longer supported.
-
Forgot to mention, downloading a firmware update is not possible unless one has another way of starting the machine. (I'm posting this on my iPad.)
Try resetting SMC and NVRAM:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/PH4405 -
changed security questions a few days ago now the new ones wont work...anyone have this problem?
hi, try all what these guys say, as they make sense (my bet is on a slug of kebab guys ).
you list bits you have tried but don't say if you have tried a new lead?
i'm not being tricky, as an electronics engineer of some 40+ years who repairs consuls, iPhones, iPads etc. i have some experience of what gets overlooked. Some of the cheap after market leads aren't the best quality,and some darn right lethal, likely to catch fire while your asleep. you might have bought of them.
i find it tends only genuine Apple leads lock in, but there might be fakes of them to. either way worth a go. perhaps se if your family or mates have one.
Alan -
I used to use Movie Maker and it would be able to handle lots of file uploads and big projects. I figure iMovie can do the same since it's newer and it's on my iMac. I was working on a project for a few months, it was working fine up until about a few days ago when the project file just stopped working. Not getting any audio or visuals and the screen went grey. I hope to not lose the project file as I've spent a lot of time on it. The project will still show up in iMovie, but it won't play. Other project files will, but this one won't for some reason. It's my first time using this program and I assumed it would be fine, but now it's causing me big problems. Anyone else run into a similar problem?
But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button
-
Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank youThen why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
So a number of my apps (ie., United, ES File Explorer, etc..), which worked a few days ago, are now crashing on start-up or shortly thereafter. Have you recorded this bug and is a fix forthcoming? Anxiously awaiting an update.
There are a number of threads about this issue on the forum if you want to do a search. Basically, you need to uninstall the latest update to Android System Webview:
http://www.droid-life.com/2015/04/27/apps-crashing-android-system-webview/#more-166266 -
I am using the PDF online converter and had no problems with it only a few days ago, but now I get an e-mail sent to me with an error message that says the following:
"While processing your job 491DC3BA-6868-08A14D (C:\Users\Public\Advertising documents (pub and pdf's)\Langley advance Ads 2008\ad for surry paper november 2008 color.pub), the converter encountered the following error situation:
Document processing discontinued : Publisher application failed to open the document and exited
Please try to resubmit your job if indicated in the above message.
We apologize for the inconvenience.
The Create Adobe PDF Online Team"
I use this service quite alot and don't have any other way of converting a file to PDF. I have tried in thepast to download an extension that would allow me to do it without the online converter, but it is'nt supported in Vista.
Help!
Mina Lee ThomasHi Mina Lee Thomas
The Online PDF Converter is a busy line, which often has a long waiting que. Error can happen in a busy line.
I suggest you use following Freeware PDF Converters.
1] Cute PDF Writer 2.6 that comes along with ghostscript Converter.
This is fast, requring no adjustments and converts many pages text
files, PPT flles easily without any errors. It is user friendly.
2] PDF Tools.
This has multifunctions.Encrypt, Decrypt, Merge, Split, Reaarange
PDF files, Create PDF, Stamp utilities. This is also very useful
freeware.
Please download these two Freeware from website. you do not have to depend on external sources.
Regards and best wishes
Dinkar
Freelance Service Provider
[email protected] -
Photoshop cc is hanging when opening a file after I updated software a few days ago
I updated PS CC a few days ago, and now whenever I open a file to work on, it hangs and takes ages to load. The file appears but looks blurred in places then gradually loads completely and the blurring disappears, but takes at least three minutes to completely open a file
Please read these and proceed accordingly:
http://forums.adobe.com/docs/DOC-2325
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html -
Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6
Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave
Maybe you are looking for
-
Convert date/time to GMT format
Hi, I want to convert my current system date to GMT format. the class java.util.Time/Calender have methods which help u to convert from GMT to local time. is there a method to convert from current System Date to GMT. tx in advance
-
Hi Experts, I have a multi-block form, which issues POST and COMMIT on different situations. But the operations fire the same triggers and I'm generating some sequences in Commit operation which are getting generated even in POST operation. I need to
-
Can Automator change my screen resolution?
I kinda ** with scripts, but I've used Automator for some easy tasks earlier. I'm not sure if it's even possible to make this but hope somebody around here can help me =) So i use my iPod Touch a lot to check on my computer using VNC (Screen sharing)
-
can some one help me i cant authorize my computer since all my others have crashed and not be deautorized
-
Are there any best practice guides available for virtualizing Microsoft Lync? I've got the Microsoft Whitepaper but that's written from a Hyper-V standpoint and a lot of there recommendations do not work in the VMware world. Jason