Project gives an error when saving.

Hi there,
I'm creating this one page website in Adobe Edge Animate, and since yesterday I encountered a new problem:
Whenever I want to save, save as, or publish my project, I get the following message:
''Edge Animate - Exception''
''An error occurred. Please save your work and restart Edge Animate''
Which is pretty frustrating, being the fact that I get that everytime I try to save my project.
Shutting down the program and starting it again doesn't change anything.
I'm working on a Macbook Pro with Snow Leopard 10.6.8, but I've also tried it on my Windows 7 PC.
In both cases I get the same error. I also updated Edge Animate from 1.5 to CC, but that didn't solved the problem either.
The project itself is under 5 mb, so I don't see how that should be the problem.
Is this a common problem/error? Do you need more information?
Please help, I put alot of effort in this project.
Sidenote: English is not my first language, excuse me if there are any grammar mistakes.
Greetings,
Tom Gudde

dear elaine,
the thing is this is the same problem i've since yesterday, too. and i think the solution is the same because during working on the site i sometimes swiched between full code mode or edited the actions js file. and than there was an error by trying to save or publish. i found out about that the reason could be the code, because i saw that parts in the normal code edit mode were missing. but i could not figure out what is wrong or where the error is. my main problem is that the project was nearly finished and in the next days the site should be launched. i don't really know what to do, because i've less time to restart the work. it took hours and hours since yesterday to find something? may you please take a look on the code of the site?
thank you
stephan

Similar Messages

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
-or-
The icon in the dock bounces once, and nothing happens.

Windows or Mac, and exactly which operating system version?

Error when saving

Hello BW Experts,
I am getting this error while saving a query in Bex.
'The query could not saved due to a problem in transport'.
I am actually creating a test query production. I am not sure why it is refering to the transport. From what i understand there is nothing to deal with transports.
Anyone experienced a similar problem before.
Suggestions appreciated.
Thanks,
BWer

OSS NOTE 194051
Symptom
An error occurs when you save a query:
Error when saving
"The query could not be saved due to a problem in transport".
Other terms
Business Explorer, query, transport, save, R9 124
Reason and Prerequisites
There are 4 possible reasons for this problem:
1. The BEx default transport request or the development class-dependent transport request is not maintained or released in the Administrator Workbench.
2. The system is set to "cannot be changed". Refer to Note 337950 (as of 2.0b SP 11), which describes how query objects can be edited in systems that cannot be changed.
3. You are not authorized to write to Workbench requests.
4. The BEx default transport request or the development-class-dependent transport request in the Administrator Workbench has another target system than the query (the transport destination of the query is determined via the transport layer of the query's development class (as of 3.0: of the package)).
The error only occurs for query objects which already have a development class, that means, which were already placed on a transport request.
Solution
Solution for Cause 1:
a) Start the Administrator Workbench
b) Choose 'Goto' to change to Transport connection
c) Choose "Request BEx" or "BEx development classes" in the toolbar.
d) Create a (new) request.
e) All changes in the BEx are now written to this request.The end user is no longer confused by 'Transport' dialog boxes.
Solution for Cause 2:
See Note 337950
Solution for Cause 3:
Authorize user to write to Workbench requests.
Solution for Cause 4:
Create a request for each target system. Assign the request suiting the target system of the transport layer of the development class (of the package) to each development class (as of 3.0: to each package) used for BEX objects.
If this does not change the situation, further information is useful for error analysis.
Go to Transaktion SE16, Table RSZCOMPDIR. In field COMPID, select the technical name of your query. Read the COMPUID of your query.
Go to SE37, function module rso_elem_get_related. Parameter I_IOBJNM is set to the COMPUID, and parameter I_OBJVERS (object version) is set to A. Only the export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT are of interest.
These entries are then entered in function module rs_tr_objects_check_insert in import parameter I_T_TR_OBJECT. In this parameter, fill field PGMID fixed with 'R3TR' and field OBJECT fixed with 'ELEM'. Field OBJ_NAME is filled with the contents of field OBJNM from export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT. The other fields are not relevant.
The export parameters of this function module are required for further error determination. Add this information to your OSS message. The table of messages E_T_MSG is important in particular.

Font licensing error when Saving?

I use Illustrator CC and get a licensing error when saving designs with downloaded fonts.
The designs look fine on my computer and fine when I open them from my drop box account.
The problem comes when others open the design, the fonts change to Arial in most cases, which is causing design issues.
This is even happening when the design is saved as a PDF.
How do I solve this problem?
Can I get licenced fonts?
Where are they available?
Many thanks for reading.

You can have your other contacts download and install the same fonts
or
you can select all the text in your document and create outlines of the fonts, printers often ask for this option.
or
You can purcahse fonts from say Adobe and if I am not mistaken you can have those installed on five work stations, I do not know if you are allowed to consider a colleague as legal user of the fonts. And I do no recall if the number of seats for the fonts have changed but it used to be five seats. As I recall.
or
you can purcahse from My Fonts as well http://www.myfonts.com but again the other contacts ave to have the fonts installed as well check out how many seats for the fonts ypoouare entitled to and if that includes remoe sites for the seats.

Spectrum digital DSK5416 driver setup gives an error when test wizard is run.

Please help us with the following problem we are facing:
1.   Spectrum digital DSK5416 driver setup gives an
error when test wizard is run. A snap shot of the same has been
attached.
2.   The A/D module doesn’t pickup microphone signal or
an audio sample for loopback but the implementation of the same works
fine in CCS environment. (We are using Mic In and Speaker Out lines)
3.   When a real-time application has run successfully
and if you close the VAB environment the application starts running
automatically until you reset the board.
4.   We don’t find the flash program button enabled, so
that any real-time program can be burned into flash and demonstrate the
embedded feature.
Note:
We are using Windows Xp professional edition.
Program is developed using DSK5416

Hello, I have included some information that will help address your questions: (1) I couldn't see the attached image file (contained errors). The RIDE/VAB DSK5416 Driver makes use of a JTAG communication when reading/writing memory on the DSK5416 hardware. You will need to make sure that the JTAG transfer option has been selected in the Driver Setup dialog box. The memory test process may seem to take a long time due to the amount of memory being accessed. (2) The VAB RTDSKAD block component provides a one-channel A/D input that makes use of the line-in channel on the DSK5416 hardware. (3) VAB does not remove the downloaded DSP executable program from DSK5416 memory, and it does remain resident. That being said, I wouldn't expect that the program would begin execution when VAB is closed. I would recommend that you verify that the DSP program stopped properly upon selecting the VAB Stop command. Then, close VAB as normal. (4) The RIDE/VAB driver for the DSK5416 does not support programming of flash memory on the DSK5416 hardware. Regards, Steve

Permission error when saving as pdf

I am using 10.6.7 on a Mini and I get a error when saving a documetn as a PDF. It says I don't have permission to save the file.

Hi Arnis,
I have also posted this separately.
Following is the ditamap i am using to create the PDF. This has booktitle, front matter, toc, chapter and backmatter. I am able to generate a PDF (complete with title page, toc, chapter, backmatter, index) using fop 0.25. However, when I try to create a pdf in FM 9.0, I get only the chapter. How can get the others through FM 9.0. Please provide a solution.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE bookmap PUBLIC "-//OASIS//DTD DITA BookMap//EN" "bookmap.dtd" [

<?Fm Validation Off?>

]>
<?Fm Condition DITA-Topicref Blue NO_OVERRIDE show?>
<?Fm Condition FM8_SYSTEM_HIDEELEMENT AsIs NO_OVERRIDE hide?>
<?Fm Condition FM8_TRACK_CHANGES_ADDED Forest%20Green SINGLE_UNDERLINE show?>
<?Fm Condition FM8_TRACK_CHANGES_DELETED Red STRIKETHROUGH show?>
<?Fm BoolCondExpr "" State 0?>
<?Fm TrackChange Off PreviewState PREVIEW_OFF_TRACK_CHANGE?>
<bookmap
    xmlns:ditaarch = "http://dita.oasis-open.org/architecture/2005/">
<booktitle><mainbooktitle>Management</mainbooktitle>
<booktitlealt>Version 4.0</booktitlealt>
<booktitlealt></booktitlealt></booktitle>
<frontmatter><notices></notices>
<booklists><toc navtitle = "Contents"/></booklists>
<preface id = "preface">
<topicref navtitle = "Preface" href = "nm\concepts\nm_Preface.xml"
    type = "concept"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></topicref></preface></frontmatter>
<chapter navtitle = "Management" href = "nm.ditamap"
    format = "ditamap" id = "chapter"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></chapter>
<backmatter><booklists><indexlist navtitle = "Index"/></booklists></backmatter></bookmap>

OS 10.6.8, Macbook Pro 3.1 error when saving monitor calibration, cannot save.

Macbook pro 3.1 OS 10.6.8, error when saving monitor calibration profile. Tried to name new profile, or save as an older profile, still got error when attempting to save.

Try a NVRAM reset, and then go through the monitor calibration again.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

Error when saving an Outlook attachment eg. Word Doc after opening it.

we made the group policy change which was giving an error when saving from opened attached files.
But for 1 particular RDS user the error still seems to be occurring. i've tried the following,
1. recreating outlook.
2. recreating user profile.
3. deleted the group policy history from the registry.
4. tried removing outlook add-ins.
your help would be really appreciated.
kind regards

Hi,
What is the error? Does outlook crash? Would you please also detail the group policy change?
We can try cleaning out the Temporary Outlook Files folder to check the result.
We can refer to the following link for the detailed steps to locate and find the temp folder:
http://www.howto-outlook.com/faq/securetemp.htm
Then we need to use OutlookTempCleaner to clean the folder:
http://www.howto-outlook.com/products/outlooktempcleaner.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Melon Chen
TechNet Community Support

Error when Saving Files ID=-39

We are using CS5 on iMac and get the following error when saving:
Can't save preview, but all other information was saved successfully. The file ended unexpectedly. Try using a backup copy. ID = -39
Generally after receiving this error the file is corrupt.
What can we do? Do you need more info? I am not sure what to do with this error.

Most probably that is your problem.
Try if saving to your hard disk solves your problem.

Invalid image error when saving to pdf

I keep getting an invalid image error when saving a MS Publisher file as a pdf. Can anyone help with solving this issue?

You need to provide system and version info and explain how you actualyl produce the PDF. Unless you use the Acrobat PDF printer, I don't see how Adobe software would be involved in any of this, as recent versions of MS Office products can save PDFs natively...
Mylenium

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

APP-AR-11526 ERROR WHEN SAVING ADJUSTMENT IN AR RECEIPTS FORM

제품 : FIN_AR
작성날짜 : 2003-04-25
APP-AR-11526 ERROR WHEN SAVING ADJUSTMENT IN AR RECEIPTS FORM.
==============================================================
PURPOSE
Problem Description
Receipt화면에서 Adjustment를 하고 Save버튼을 누를때,
APP-AR-11526 arp_process_adjustment.insert adjustment exception ORA-20001
위와 같은 에러 발생.
Workaround
select taxable_amount
from RA_CUSTOMER_TRX_LINES_ALL
where customer_trx_id = 문제가되는 transaction id
and line_type='TAX';
NULL
Update RA_CUSTOMER_TRX_LINES_ALL
set taxable_amount = transaction의 원래 금액
where customer_trx_id = 문제가되는 transaction id
and line_type='TAX';
Solution Description
RA_CUSTOMER_TRX_LINES_ALL의 taxable_amount값이 NULL인 경우,
invoice 금액 adjustment시 오류가 발생한다.
Reference Documents
-------------------

Pl see if MOS Doc 341469.1 (Adjustment Entry: APP-AR-96027: Tax accounting not defined for the tax code or tax location assigned to this invoice) can help.
HTH
Srini

Unresponsive Script Error when Saving Changed Set in Flickr Organizer

I'm getting an unresponsive script error when saving a changed set in the Flickr organizer.
The problem started when using Firefox 3.6.8 or maybe an earlier version. It persists in Firefox 3.6.12
I've noticed the error only appears in the Organizer and only when saving a changed set or saving after deleting a set.
It does indeed save the changed set correctly before crashing.
It is not intermittent and happens every time I perform this save.
The error does not occur in Chrome or Safari.
Examples of the error messages can be found at
http://www.flickr.com/photos/blazer8696/4897580573/
and
http://www.flickr.com/photos/blazer8696/4897656175/

Upgrading to 4.0.1 has corrected this problem.

HUH? Error when saving

We are getting a HUH? Error when saving certain files. Once this error shows up, it will save the document, but will a
lways come up when you resave. It only happens on some documents
We are on a network and share files, but everyone is working in CS4

I have been having this issue on one system. I get an "Unexpected Error cannot save file" when trying to save in any format.
This happens when saving across the network or locally.
(CS3 Vista)
We have been living with this problem since the beginning. We simply do not work on this computer in Illustrator for this reason.

Fatal error when saving HDTV project to tape

Hello,
when trying to save a HDTV project (50 min.) to tape PE3 starts transcoding (HD activity observed), but after appr. 30 seconds I get the following error message:
"A fatal error occurred: [..\API\Inc\BE/Audio/AudioSubBuffer.h-105]. The program has to be terminated"
PE3 then crashes completely, not being able to save the project.
I'm using Windows XP SP3 with latest updates. There are 20 GB free space on my HD. I am able to save the project to a HD folder as a *.m2t file without any problems.
Any idea what is causing the error?
Heinz

The reason I suggested was that standard DV-AVI files sometimes give this error on burning, and it can be resolved by first exporting to DV-AVI and then burning this file. I am not aware of the source of the issue but this error message has appeared a couple of times previously in the forum.
Regarding the 2GB of HD space, this might be a file generated while conforming the audio. You should start a new folder for each project. then when you have completed the project you can delete the folder and clean up the temporary files generated for the project.
See this FAQ:
http://www.adobeforums.com/webx/.3bbc8177
One re-rendering pass will not affect quality too much. I have found that PE3 is good at re-rendering HDV. Best way to check is to view both files and see if you can determine any difference.

Project gives an error when saving.

Similar Messages

Maybe you are looking for