Project in IDES for FI and MM

Hi All,
we want to do project in IDES for Material Management and Finance ,we have very good knowledge in SAP MM and FI but i have not worked till yet in any projects ,please guide us for this .
This discussion will help for many hunters who are searching for Fake experience because many are don't know this .please help us in this subject
Dear Moderators,
one humble request please do not reject this or Locked this discussion we have already checked in forum no where has given the information for MM and FI project please do not reject .
thanks a lot

Hi Krishan ,
Thanks for your reply .
we mean to task here is Guide lines how the Project starts and When the Material Management and Finance come to the picture in Project .kindly guide us
thanks

Similar Messages

Project Resource Calendars for onshore and offshore (different working hours)

Advice please.
As with many companies we use Project 2010 with onshore and offshore resources.
Facts are as follows:
Onshore resource – 09:00 – 17:00 – 35 hour week
Offshore resource – 08:00 – 18:00 – 40 hour week
These resources are in different time zones; however that element is not an issue.
The problem seems to be with resource calendars. Resource calendars are setup as per above and assigned to appropriate resources in EPM/Project Server 2010 - however could be local for same issue.
The problem is that work is reflected correctly in hours or days but not both.
So looking at Task usage table.
For example:
Typing in hours for Onshore and Offshore resources on any task is correct.
So 7 for onshore and 9 for offshore. However when you can the work view in options so that work is entered in days, its incorrect for offshore.
Same hours for both but incorrect days. Basically the resource calendar does not seem to have an impact.
The Plan default working times can be set to either schedule but either way one or the other type of resource is out.
For instance : Offshore resource 9 hours should equate to 1day. However it equates to 1.29 days.
Which would be correct if that resource was on an onshore cal.
My assumption is as follows:
Set the Project default hours to 08:00 – 18:00 – 9 hour days, 40 hour week.
This allows offshore to work there hours as the project plan is effectively open for business.
Onshore resources should then be restricted to their resource calendar meaning that they only work 7 hours per day regardless of the plan indicating 9 hour days.
Hope that makes sense...
Any thoughts would be much appreciated…..
-CL.

Hi,
Everything you write is right, and your confusion only stems from the misunderstanding of how Project defined the "day" as a time unit.
Matter of fact, Project uses for its calculations only ONE time unit which is the MINUTE.
Of course, that implies the HOUR is a usable unit as well - an hour being 60 minutes isn't questioned by anyone.
OTOH, your post illustrateds tha a definition for day is not so obvious; Project's definition is that a day is always equal to an hour times the parameter "hours per day" in the options. So what a day is, is totally independent from any calendar, Project,
Resource or Task calendar. Within that definition the values you see are "right".
But the good news is that your other assumption,quote:
Onshore resources should then be restricted to their resource calendar meaning that they only work 7 hours per day regardless of the plan indicating 9 hour days.
That is true. Work is planned according to available working time in the appropriate calendar.
My advice is to not use the day as planning unit in any view: the hour will better allow to understand how Project is planning the tasks.
Greetings,

Where do I send great ideas for iPhone and iTouch applications??

I have some great ideas that Apple might be interested, but how do I let them know what they are. I don't want to ring as it would be an expensive international call!
If anybody working for Apple is moderating these forums could you please contact me and let me know what to do?
Or if any of you guys know how to speak to them, leave your comment.
My app ideas are fun and enjoyable, I'm sure you will be downloading them in the near future!

You can find an app developer and let them know.
I doubt Apple will accept unsolicited ideas, but you could use their feedback link if you feel compelled to do so.
http://www.apple.com/feedback/iphone.html

Build AS3 AIR project on Linux for Android and iOS?

We're about to use a build server for taking some work out of our hands (testing, building etc). The build server is running on Linux and therefore we would like to know if we can build the AS3 (AIR) sourcecode on the Linux environment. We usely create apps for Android and iOS.
Can anyone give some more information on this? Is it true that the ADT doesn't run on Linux?

FYI, I updated my blog post. I found a program called ideviceinstaller (available in the Ubuntu repos ala apt-get install ideviceinstaller or from the website) that allows installation of .ipa files onto iOS devices from Linux.
Previously that was the only development iteration step that required a Windows VM. Now in my workflow, a VM is no longer required for iOS development. (Obviously a Mac is still required to upload to the app store at the end.)
Also, a bonus, here's a quick command to view UUID's authorized by the provisioning file inside an .ipa file:
> unzip -c Main.ipa *.mobileprovision | strings | egrep -i string\>[0-9a-f]\{40\}
<string>d9c2fee807324a18baf5a544ffa2c80f23d3****</string>
<string>f634a0a95bc2327f6a26cb39cf18a01918cf****</string>
<string>651e4284467d328e37c18988c981179b5909****</string>
<string>c11d7eef800632d072da067d9b993624f25b****</string>
<string>72d85ab26cd525a328d3a71e3fe416c61fd6****</string>

Project System Report for AP and AR

Hi,
Working on a process where man hour, equipment cost, AR and AP should be captured in a PS WBS element. Posting for man hrs and equipments are through service order and AP/AR are through FI posting. Throught controlling view we can see that cost is capturing and most of the standard reports are working except S_ALR_87100191, S_ALR_87013573 , S_ALR_87013575 and S_ALR_87013574 - Expenses , where Receipt and Expenses are most important. Is there seperate settings needs to be done in CO or PS area to make this report work...??. I always get error "
No costs, revenues or finances were selected
Message no. OK602"
Help would be highly appreciated......
Thanks.

Hi,
Can u check project cash management activated r not
Please ref below link
PS Cash Management
Thanks
Prasath n

Any ideas for security and parental control software yet???

Just received two of the touchpads from the fire sale and gave them to my kids, both under 10. I am very interested in limiting the sites that can be accessed through the browser, as well as a few other things. Has anyone found a practical means of doing this? I'd hate to give up on this and switch it over to Android, especially since there is only Gingerbread available. But, I just don't know what else I can do about these. Any ideas?
Thanks!
Post relates to: HP TouchPad (WiFi)

Please take this post with a grain of salt. I don't claim to be a security and parental control software expert, but I have researched these solutions and have some personal experience with them. That being said, here's some ideas to get you started.
As speedtouch mentioned, OpenDNS is a fantastic solution for website filtering. They have a great set of filters that can be customized and are one of the easiest systems to set up. Simply install an updater app on one of your desktop computers (or directly on your router if it's supported), configure your router to use their DNS servers, and you're good to go. I personally use this system mysefl and it works really well. The only downside in my experience is that there is not a temporary override system (at least, not in the free version that I use). An example of when this might be handy: my wife goes clothes shopping and looking at new bras. Every once in a while, a perfectly legitimate site might get blocked (in this case, probably something I don't want my kid looking at but perfectly fine for my wife). The option to "temporarily override the block" or "temporarily allow" the site would be nice, but it doesn't exist.
Another FANTASTIC solution that I've used in the past is the Astaro Security Gateway. They have a free home version of their "Software Appliance" that goes above and beyond OpenDNS. I haven't used it in a while, but when I did it was able to not only filter web sites but also monitor Instant Messaging and other online activites. It's a bit more involved as you need your own hardware (I used an old computer with 2 network cards and stuck it in between my router and my broadband modem), but the results are pretty powerful.
The downside to all these solutions, however, is that they will only work when the TouchPad is on your network. If they connect to a neighbors network of if the go to a friends house, all of these systems will be moot because they are completely bypassed. The only way to monitor that content from ANY network would be to install an application on the device itself and to my knowledge, none exist.

Ideas for tension and compression test stand

Hello,
I currently work for a company that manufactures weigh scale
devices. A majority of the devices are either patient weight
scales ( the kind you stand on at the doctors ) or a tension load cell
(displays patient weight when on a lifter). Typically the devices
can weigh up to 1000lbs full scale.
My job usually consists of performing engineering test / evaluation of
these devices. A majority of the testing involves me slinging
massive amounts of weight all day… I usually have to do
repeatability testing, linearity runs (ascending / descending),
etc. Currently this technique is purely physical… I
am looking for ideas to make it a LabView controlled technique that is
relatively CHEAP.
Desired:
1) Relatively accurate (at 1000 lbs) accurate AND REPEATABLE to 0.05 lbs
2) Once at a particular load it must remain stable to 0.00 lbs ( sometimes air compression devices oscillate)
3) Can be configured for tension loads or compression loads (can be manual to configure)
4) Automation – Would like to run either tension testing OR compression
testing but to be able to just walk away and have the system
automagically perform the repeatability/linearity runs, etc.
Ideas so far:
A) A lever arm whose fulcrum point changes based on a linear motor and a known load.
B Some kind of linear motor that can be securely mounted
vertically: would have to have various types of attachments to
configure tension / compression testing.
I haven’t even begun to research linear motors… I don’t even know if they are appropriate or not for the application.
Any brainstorming ideas would be greatly appreciated
Thank you for your time

Personally, I would not try to reinvent the wheel. First to enter my mind is compressive/tensile testing with off-the-shelf equipment from Instron or similar manufacturer. They have highly capable automation/data collection software too. Not cheap as you wanted, but precise, repeatable, traceable, and pretty much out of the box solution, less custom fixturing. Realize you request 0.005% repeatability at 1000lbs full scale, keep in mind the time, cost, and labor you may incur trying to design, build, test, and certify an in-house built solution.
If not, maybe you can get some ideas by looking at how such equipment works.
Voice-coil mass drivers may be a means to apply forces.
May the force be with you
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Need Ideas for creating and using Custom Business Object

Hello Guys,
I am developing an application which uses a Request->Approve->Create approach for creating Purchase documents.
Now I am a little puzzled about how to make use of the Business Object BUS2014.
The application I am developing has its own unique 'Request Number' (say REQID) which will point to the Request for Creation of a purchase order.
Whenever a Request is created (from a Z-Tcode) a workflow needs to be initiated and it has to be sent to the approver.
The Purchase Document will be created once the approver approves.
Now my confusion here is, if I use BUS2014, the object will be instantiated only during the final step of the workflow. But I need an instance during the beginning of the Requestor ->Approver negotiations as I am playing with events. These events needs an Object_key.
How should I proceed here?
Should I create a new logical Business Object like ZPOREQ where I have the above mentioned REQID as the key?
And should I have an attribute of type BUS2014 inside the custom BO?
How will I make use of the methods like BUS2014.Create etc which I may need to create the purchase document?
Any small direction will be a huge help for me to get used to this wilderness.

Hi,
You should continue with the ABAP class idea. The business objects are kind of "obsolete" already, and if there is a need to create a new "object", ABAP classes are the way to go. Business objects are still useful, but I normally use them only when an existing standard business object fulfills the requirements (possibly with slight additions) which is almost never.
From my point of view you can use the existing class. Depending on the circumstances I normally have just one class that I use for both workflow and the possible other functionality that is required, but you have to understand that I have this goal in my mind already when starting the development process. As your class most probably has many useful features already (such as you have the header and item data as attributes etc. (if I understood correctly?), these are also useful in in workflow (class attributes will be available in WF container etc.).
If you are hesitant to use the same class directly in your workflow, you could also create a new class ZCL_REQUEST_FOR_WF (with the workflow interface), and then simply add your existing class ZCL_WF_REQUEST as an attribute to this new class. Then this new workflow class could include the pure workflow stuff, and your existing class the non-workflow stuff. But this most probably will not make much sense - just implement the if_workflow interface in your existing class (this is just one possibility that you might consider.)
Regards,
Karri

Project 2013, code for PWA and Client

We are migrating from MS Project 2007 to 2013 and was wondering if there is any way to have VBA code that executes in the client for additional validation, customizations, etc to be able to be migrated to be able to run in when editing a project in Project
Center from PWA? I am guessing that it would involve two sets of code since it is two different platforms. Is there any easy way to ensure the same functionality in both environments, Client to PWA code generators or something like that?
I have looked and could not find anything but was hoping a software company would have created a utility/process to keep code that needs to run on both platforms in sync.
Thank you in advance.

Hello,
Some of that stuff will probably still require VBA, certainly those things to mentioned probably would. Depending on the validation of fields that could be server side so would work if you edit the project in Project Pro or PWA. If you are not familiar with
the server side / PWA options, take a look at the Project 2013 SDK to start with:
https://www.microsoft.com/en-us/download/details.aspx?id=30435
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Please recommend IDE for JSP and Beans

Hi guys,
I am looking for a decent IDE to work with JSP and Beans. I have tried JBuilder which has too much going on at the same time and I find it to be an overkill for what I am doing; I find NetBeans kind of irritating. I develop web applications, hence I dont need any GUI stuff for beans.
Just looking for something that will enable me to rapidly develop beans as a support system for JSP pages and at the same time, it should provide good support for coding JSP pages. Little bit of management functions wont hurt either, but are not required. I dont mind if I have to pay for the IDE. Any recommendations?

I like Eclipse for Java Development, and I use the MyEclipse plug-in for J2EE development.
There is a free J2EE plug-in (Lomboz) but I'd much rather pay the $29.99/year for MyEclipse. It's been perfect for me.

Idea for Extensibility and Leave Requests | Fiori Apps RDS | Fiori Apps RDS General

Hi everyone,
I have an idea and some questions in relation to Extensibility and Leave Requests... etc.

Shoot them

Can't retrieve iMovie project saved to DVD for storage and editing.

When I save my iMovie project to DVD for storage and possible future editing, I cannot retrieve it from the DVD. I get the message, "The project could not be opened, bacuase the disk is full, the folder is locked, or the folder permissions are incorrect..." How do I remedy that?

the folder is locked
iMovie projects won't work with locked volumes (such as a DVD!). So you must first copy the project to the HD.

Project Server 2013 for Resource Planning & Project Portfolio Management

We are looking to use project server 2013 for resource and project portfolio management. We are an IT department of approximately 600 growing to 1,000 within the next several years.
We would like to us PS2013 to do the following :
Manage Portfolio of Projects
Manage Resources against this Portfolio
Calculate Project Finances using resource roles and rates
I would be grateful to have both comments on experience , both positive and negative.
Thank You

Many teams within organizations are turning to Project Server to help them control resources, deliverables and costs better. It does resource management very well with work & cost resources, baseline costs, material costs, budget costs and
out of the box earned value analysis (EV). The Strategy (portfolio) component is very powerful and it will help you identify project that align to your objects then do what if analysis to find the right mix of projects.
Here are a couple of things you should think about when moving to PS2013:
1) Who will be using the tool? If it is a mix of onsite staff, remote staff, vendors, contractors etc. you may want to think about a hosted solution.
2) Training. Don't assume everyone will just magically 'know' how to use the tool. Train everyone (team members, PMs, Executives) then train them again. It's the only way to truly get the value out of the tool.
3) Who will manage the system? This is not a typical application. The right administrator needs SharePoint, Project Server, SQL Server, MS Project, Analysis Services and SQL Report writing skills. Please note that much of this can
be learned by the right person but DEFINITELY find the right person.
4) Don't start customizing right out of the box. You will get frustrated. Adjust your organization to the tool early on. I know that is easier said than done but you need a realistic approach to get tool acceptance moving early.
5) Use workflows but don't use them right out of the gate. Workflows are great but I suggest you wait until phase 2 or 3 to start aligning them to your business processes.
6) Lastly and most importantly, you must first establish your own business processes THEN align them to the tool. DO NOT assume the tool will create business process for you. You must think about how you are going to initiate a project,
how are you going to track deliverables, how will time sheets be managed, etc. Get to a whiteboard, crack open Visio and start building and establishing your processes now. PS 2013 is pretty flexible and usually will align well with existing business
processes.
And don't forget to hire a good consultant. They can be brought in during key phases of your roll-out to add value, help you avoid risks, and provide you with best practice advice.
Good luck.

Good graphics for black and white books?

Can anyone suggest a website where I can get good compostion ideas for black and white work, layouts for books? Actually I’m working on a book on house designs so would like to get ideas for visual layouts for the same, captions, blow-ups etc.The book would have 3d sketchup model views of different types of house designs.

Maybe a library or bookstore would be a better source, since you're designing a book.

Looking for a Popular IDE for JAVA

Hi folks,
I am starting my journey into JAVA programming -I am wondering if there are any cheap or free Integrated Development Environment (IDE) for compiling and running Java programs. I downloaded SDK (Software development kit ,version 1.2) and I am finding it rather painful to run the commands manually to compile and run Java programs. Any help would be greatly appreciated
I also downloaded Jbuilder(university edition) from the book Java -how to program ,third edition by Deitel and Deitel -had some problems with it and unfortunately discovered that it is for Windows 95 and NT while I have windows 98

Hi folks,
I am starting my journey into JAVA programming Great. That's nice to hear. :)
-I am
wondering if there are any cheap or free Integrated
Development Environment (IDE) for compiling and
running Java programs. Lucky for you therer is :) .
I downloaded SDK (Software development kit ,version 1.2) and I am finding it
rather painful to run the commands manually to compile
and run Java programs. Any help would be greatly
appreciatedHeh, I hated command line programming, especially from the dos prompt on
windos platform.
>
I also downloaded Jbuilder(university edition) from
the book Java -how to program ,third edition by Deitel
and Deitel -had some problems with it and
unfortunately discovered that it is for Windows 95 and
NT while I have windows 98I'd recommend a few others.
1) Netbeans, at http://www.netbeans.org
2) Forte for Java, http://www.sun.com ; poke around to find it.
3) JAWA. The address(& the spelling) fails me.
I'd personally recommend 1&2, it runs on most platforms, its packs quite a lot of features. But it is quite resoure hungry and you do need a lot of memory. About > 256 .
I have not used the third one, but quite a few people here seem to like it.
There is another one in development, http://www.eclipse.org , seems to be bankrolled by IBM.

Project in IDES for FI and MM

Similar Messages

Maybe you are looking for