Project information on the distribution is not valid. &PJM_ERROR_MSG

Hi ,
When i am doing the "Import Standard Purchase Orders" Program in Purchasing module, I am getting the following error.
"Error: Project information on the distribution is not valid. &PJM_ERROR_MSG"
Application: 11.5.10.2
RDBMS: 9i
Thanks.

Hi user;
Please check Note:Invalid Project Information Error When Saving a Requisition With Project Data Defaulted From Preferences [ID 360337.1] and see its helpful
Regard
Helios

Similar Messages

Flat file connection: The file name "\server\share\path\file.txt" specified in the connection was not valid

I'm trying to execute a SSIS package via SQL agent with a flat file source - however it fails with Code: 0xC001401E The file name "\server\share\path\file.txt" specified in the connection was not valid.
It appears that the problem is with the rights of the user that's running the package (it's a proxy account). If I use a higher-privelege account (domain admin) to run the package it completes successfully. But this is not a long-term solution, and I can't
see a reason why the user doesn't have rights to the file. The effective permissions of the file and parent folder both give the user full control. The user has full control over the share as well. The user can access the file (copy, etc) outside the SSIS
package.
Running the package manually via DTExec gives me the same error - I've tried 32 and 64bit versions with the same result. But running as a domain admin works correctly every time.
I feel like I've been beating my head against a brick wall on this one... Is there some sort of magic permissions, file or otherwise, that are required to use a flat file target in an SSIS package?

Hi Rossco150,
I have tried to reproduce the issue in my test environment (Windows Server 2012 R2 + SQL Server 2008 R2), however, everything goes well with the permission settings as you mentioned. In my test, the permissions of the folders are set as follows:
\\ServerName\Temp --- Read
\\ServerName\Temp\Source --- No access
\\ServerName\Temp\Source\Flat Files --- Full control
I suspect that your permission settings on the folders are not absolutely as you said above. Could you double check the permission settings on each level of the folder hierarchy? In addition, check the “Execute as user” information from job history to make
sure the job was running in the proxy security context indeed. Which version of SSIS are you using? If possible, I suggest that you install the latest Service Pack for you SQL Server or even install the latest CU patch.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

When i try to load any page on Mozilla 28 the page opens but i get additional tab saying The address isn't valid The URL is not valid and cannot be loaded.

When i try to load any page on Mozilla 28 the page opens but i get additional tab saying The address isn't valid The URL is not valid and cannot be loaded. I tried everything from reseting Firefox ,completely new installation of firefox to about.config and nothing worked it's been two days now since the problem started and i am pretty frustrated and desperate as i try to fix the issue so please help me with some solutions????
Big thanks in advance

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Preferences_not_saved

DPM 2012 R2 install fail - Reporting services "definition contains XML that is not well-formed or the XML is not valid"

Hi Everyone,
I've been battling with this for a while and I'm getting nowhere. I'm attempting to install DPM 2012R2 onto a fresh VM with a local SQL installation. The setup is as follows:
Server OS: 2008R2 SP1
SQL: 2008 R2 standard with SP3(tried SP2 before this)
Collation: SQL_Latin1_General_CP1_CI_AS
Reporting services installed: Yes(ticked do not configure during the installation)
Enabled reporting servics on port 80 with the default URL
DPM Installation does not throw any errors during the preinstall stage(The server passes all the checks)
Basically, when Installing. I get this error(extract):
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
[10/12/2014 2:35:25 p.m.] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception
---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
exception ---> System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: The report definition is not valid or supported by this version of Reporting Services. This could be the result of publishing a report definition of
a later version of Reporting Services, or that the report definition contains XML that is not well-formed or the XML is not valid based on the Report Definition schema. Details: Root element is missing.
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.DeployReports(Boolean isRemoteReporting, Boolean isUpgrade)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[10/12/2014 2:35:25 p.m.] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[10/12/2014 2:35:25 p.m.] Information : Data Protection Manager installation has failed. All the items that were copied during the installation process have been removed.
For details, click the Error tab.
Any ideas?
I've managed to get it to this stage. Originally I didn't have encryption keys or a listening port(which I fixed).

Can you try following steps:
If there are SSL certificates on your computer, by default SQL 2008
installation configures HTTPS for reporting websites. When DPM tries to
deploy reports on these websites it may fail if the reporting websites
are not accessible (might be due to invalid/expired certificates). To
workaround this, provided you do not require HTTPS for reporting websites do
the following:
1. Edit C:\Program Files\Microsoft DPM\SQL\MSRS10.MSDPMV3BETA1EVAL\Reporting
Services\ReportServer\rsreportserver.config
2. Set the SecureConnectionLevel to 0 if the current value is 2 (A value to
2 means secure connection is required)
3. Connect to SQL reporting service configuration manager and connect to the
instance MSDPMV3BETA1EVAL
4. Click on Web Service URL, click advanced and remove SSL identities
5. Repeat the above for Report Manager URL
6. Make sure report manager URL and web service URL are accessible with out
any errors.
6. Restart report server
If that doesn't solve the problem, please try following steps:
1. Open Start-> All programs->SQL server 2008->Configuration Tools->Report
Server Configuration Manager
2. Connect to the instance which the DPM is using to install.
3. Browse Report Manager URL and web service url
4. If report manager URL or web service url throws any error say 500 or 404
fix the error. (Try also replacing machine name with localhost in url)
5. Otherwise delete DPMReports folder (if present) using below instructions
6. Restart reporting services
7. Try DPM setup again.
Deleting DPM reports:
1. Open report manager URL in IE
2. Click show details on right hand side
3. Put a tick against DPMReports folder
4. Click Delete button.
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

HT201407 I bought my iphone 4 in the UK and I am trying to use a sim in the UAE and it doesn't work. It says that the sim is not valid, how can I get this unlocked?

I bought my iphone 4 in the UK and I am trying to use a sim in the UAE and it doesn't work. It says that the sim is not valid, how can I get this unlocked?

You are saying the phone is locked, but then you are saying there is no provider. The two situations cannot peacefully coexist. Contact Apple and they can tell you if the phone is locked and if locked to which provider the phone is locked. People on this board are not Apple employees and cannot get you that information.

Always put the right number to verify the credit card, but it always appears that the number is not valid.

Always put the right number to verify the credit card, but it always appears that the number is not valid.

Check your billing address information. iTunes uses the USPS system to validate the CC billing address. You could either try;
1. Look at your paper or online bank statement
2. Go to usps.com and look at zipcode lookup. Enter your billing address, submit and look for any change. A simple "A" versus "a" could make the difference.

The URL bar can also be used for a search engine, but when I search something a page pops up reading "The URL is not valid."

When I click on the URL bar it says to insert address or search, yet when I search it says the URL is not valid, which is obvious because I didn't put in a URL, I searched something. I never installed an add on or anything. It just quit working one time and hasn't worked since.

Does it happen to all the search words or particular words?
It may be a malware issue too.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. 
'''Note''': ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

I was given a 50$ iBooks gift card, I enter the code precisely and I am always told the code is not valid... the card was bought at Bestbuy

I was given a 50$ iBooks gift card, I enter the code precisely and I am always told the code is not valid... the card was bought at Bestbuy

shrinkydink54 wrote:
... The information I got back from support was not clear ...
Contact Support again...
Use this Link > Apple Support iTunes Store Contact
Note:
iTunes Gift Cards are only Valid in Country of Issue.

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?
This happens a lot regardless of the web page. I continually have to restart FF and it persists still

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

The URL is not valid and cannot be loaded

seems like maybe firefox mishandles untrusted certificates?
It gives error: Alert The URL is not valid and cannot be loaded.
example:
https://notes.corp.cat.com/
other browsers can load this URL just fine. When I visit it in Firefox, I get the error in a simple little message box with a yellow triangle exclamation point, titled "Alert".
ALSO.... when I click the "Home" button in firefox, I get the error, and the home page does not load. Currently the home page is set to "Mozilla Firefox Start Page."
changing the home page to: http://www.google.com/ allows the home page button to work normally.
restoring the home page to default brings the error behavior back when clicking the home button.
changing the home page to: https://notes.corp.cat.com/ produces the same error, just like when I manually type in an https URL with a funky security certificate.
This problem only seems to happen on secure URLs with untrusted certificates, i.e. sites that are too cheap to pay to have their certificate registered with one of the certificate vendors or however the hell that works, so as a result every time you visit their web site, your browser starts to whine that it might be a forgery or whatever.
It used to be in Firefox that I could load these pages and just specify that I want to trust the site anyway. Now firefox gives this error that doesn't allow the user to know what is really going on or what the reason for the error is. It is as if the developers decided that users are too stupid to decide if they really want to visit the site or not, so as a result Firefox is just refusing to visit any web sites where the authenticity of the certificate can't be verified? Hey, it's not a bad idea, to be honest. :-) But it's kind of annoying, because here I am, sort of smart enough to know what I'm doing, but I don't have the choice in the matter...
I restarted with all add-ons disabled and that didn't help. I don't have much installled in the way of add-ons anyway. All I have is JAVA quick starter 1.0, and Adobe Acrobat, Java development toolkit, Java platform SE, Microsoft DRM, and Windows Media Player Plug-in Dynamic Link Library. Not even Flash. All the above is disabled now that I rebooted with add-ons disabled, and I still have the issue.
thanks for any help you can provide.

Please [https://bugzilla.mozilla.org/show_bug.cgi?id=713167 see this.] Installing [https://www.microsoft.com/download/en/details.aspx?id=5638 Visual C++ 2005 SP1] or the .Net Framework 3.5 SP1 may help mitigate the issue.

How do I enable Firefox 4 to do a search on more than one word (e.g. "yahoo mail") without receiving the error message "the URL is not valid and cannot be loaded"?

After loading Firefox 4.0, I changed the address bar search engine to Google Search by Name, so I'd be taken straight to the most relevant webpage when I type in a word.
It works fine when I type in one word, but if I use a search with more than one word (e.g. "yahoo mail" or "google maps") I get an alert saying "The URL is not valid and cannot be loaded". Is there any way I can fix the address bar to accept multiple word searches?
I've tried disabling all my add-ons, but it didn't make any difference.

Hi, this should sort out your problem:
1. Type in "about:config" into the address bar, this will open the settings menu. Click on "I'll be careful, I promise!"
2. Search for "keyword.URL" in the filter bar.
3. Enter "http://www.google.com/search?btnI=I%27m+Feeling+Lucky&q=" into the value field.
I'm no expert, but I had the same problem which got on my nerves after being so used to being able to type anything in, and following these steps fixed it.

I can't used my applications on the Imac it shows a screen telling me that the app is not valid for it, but im sure it is because i had it for a long time in my macbook

i can used any app, but im specially concerned about one i use the most. It shows a screen telling me that the app is not valid but im pretty sure it is

Older apps which were not written for Intel Macs will no longer work in 10.8 and newer versions of OS X.
Matt
Matt,
Actually it's 10.7 and newer versions of OS X.

HT1277 I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)? That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both? Or more?
I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details. The BT email client set-up starts here.

The certificate is not valid and cannot be used to verify the identity of this website

Question posted in Stack Overflow too: java - How to solve "The certificate is not valid and cannot be used to verify the identity of this website" error? - St…
The question is, How to solve "The certificate is not valid and cannot be used to verify the identity of this website" error?.
Here are the details:
I have a signed applet that has been working fine, until I updated Java to 8u25 (1.8.0_25-b18). Now, the application shows an alert message "Do you want to continue? The connection to this website is untrusted". There is a note in this message too, "The certificate is not valid and cannot be used to verify the identity of this website".
The applet is loaded without problems. But when the user tries to use a specific function of that application, the warning message is displayed.
I've checked the java console when this happens, and this warning message is displayed right after these lines:
security: Obtain certificate collection in SSL Root CA certificate store
security: Invalid certificate from HTTPS server
network: Cache entry not found [url: https://sub.domain.net:9876, version: null]
The application is downloaded from a different domain, say "https://app.domain.net/ .....", so no jars are downloaded from "https://sub.domain.net:9876 ", but the applet connects to "https://sub.domain.net:9876 " to send/receive data.
The applet is signed correctly, and so far, it meets all the security requirements according to Java. This issue seems to happen when the application tries to connect internally with an HTTPS url like https://sub.domain.net:9876. That sites' SSL certificate is valid, issued by GoDaddy and has not expired.
Again, this started to happen after updating my JRE to 8u25. I've tested adding the offending URL to Java security exception list, with no success.
Here are a few screenshot of this problem:
This is the warning message displayed:

For what it's worth we discovered what the issue was. When we installed the new certificates onto our servers we also discovered that you have to install the certificates of all intermediate servers listed in your certificate. This mean that all URLs listed on your certificate, have to have the intermediate certificate for the certificate authority installed. This also includes all the Alt Names of your domains, even if they do not use the applet.

Project information on the distribution is not valid. &PJM_ERROR_MSG

Similar Messages

Maybe you are looking for