Project is not rendering

My project is not rendering. The orange colored indicators in the timeline will not go away.
The background task window was spinning for at least two hours without giving the percentage. Now- I don't know how- it just indicates 58 percent. It's not spinning and has not changed since last night.
I searched for a way to start and stop rendering. I couldn't figure it out.
I'm working with an iMac 3.4 GHz Intel Core i7, Mac OS X Lion 10.7.2. My video is on a Pegasus R4 external drive connected via Thunderbolt.

Exactly, it slows down FCPX, I only render when I need to, and about slow, it is best to keep only one project available. Here is good and cheep Software to move project from FCPX
http://assistedediting.intelligentassistance.com/EventManagerX/

Similar Messages

  • Adf project output not rendering on Mac os -apple laptop

    hi expert,
    am using jdev11.1.1.5.0-adfbc-oracledb10g-mozilla ffx9.0.1.(developed my project in Windows xp service pack2)
    and i get adf project url address and put in my applelaptop-mac os- safari browser.
    nothing is rendering.
    anything want to configure.?

    in previous post i asked that are you mean like that,
    http://127.0.0.1:7101 then the Mac is trying to access itself.
    yes i know,trying to access itself.
    instead of that,
    i already tried with my ip.
    http://1xx.1xx.0.1xx:7101
    my log shows nothing, my browser doesnt show any message.
    so i think additional setting need to do that. is it so?

  • JSF page not rendered in Design View (JDev 11.1.2.1.0)

    Hi!
    Recently strange behavior in JDeveloper 11.1.2.1.0) begins: JSF pages in some projects are not rendered anymore. We enabled "Show Design time Messages in log" in JDev Tools/Preferences/JSP and HTML Visual editor and message
    WARNING: A problem was encountered executing the page.  Using fallback rendering is shown in log. This is visible on this snapshot:
    [http://dl.dropbox.com/u/14304804/design_view_problem.jpg|http://dl.dropbox.com/u/14304804/design_view_problem.jpg]
    What is common to all of the projects with this issue is that we run "Remove ADF Security Configuration" which was enabled before and we implemented our custom security using phase-listener.
    Any idea what is wrong here?
    Regards,
    Sašo
    Edited by: Sašo C. on May 21, 2012 2:24 PM

    It's a limitation, if you will, of the way JDeveloper works. It essentially runs your JSF page in order to get the rendering. At design time, the phase listener is obviously messing things up since you're not in a proper secured environment - hence the workaround to bypass your phase listener at design time.

  • FCE not rendering

    Some items in my project are not rendered (there is a red line in the timeline), but when I want to render all (or just the selection), it does not render. Nothing is checked in the drop down menu, just as if evrything was rendered. I do not understand. What am I doing wrong? Is something corrupted?

    The drop-down menu under "Render All" or "Render Selection" doesn't indicate what needs to be rendered, it indicates what FCE renders when you tell it to. For example, if you have green lines, yellow lines, and red lines in your timeline, and only the red line is checked in the drop-down menu, only the red lines will be rendered.

  • Using FCE 4 to edit mov file, inserted 8 chapter markers by double tap M, enter title, click add chapter marker.  Rendered and half of the chapter markers unrecognized or not functional.  Delete FCE prefs and redo project did not help.  How to fix?

    Using FCE 4 to edit mov file.  Added 8 chapter markers by double tap M, enter title, click add chapter marker.  Rendered and 4 of the chapter markers are skipped or not functioning.  Deleting FCE prefs and rebuild project did not solve.  Solution anyone? 

    Thanks for taking a look, I am pretty new on a Mac, is this the data you need?

  • I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

    I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

    When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
    A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds.  Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
    -DH

  • Inserting new row in Table in 11.1.2 from 11.1.1.3 not rendering table!!!!!

    Hey Guys, my status might say noob but i am well seasoned in ADF. We migrated from 11.1.1.3 to the new JDEV 11.1.2. We are doing a test run before we commit to it.
    I noticed the following:
    We have master detail forms that work flawlessly in 11.1.1.3 when we ran the app under 11.1.2 we noticed that any time you try to add a new row to a table the table does not render. The server logs show the action going through and the count goes up one but the table is not rendered anymore it disappears!!!!!!!!!!!!!!
    Now all of this was imported from the 11.1.1.3. all of our tables that have createInsert actions on them are doing this.
    If i drag the tables again and set them up from scratch it seems to work fine. Our issue is we have a good 300 of these tables in different panels and panel collections. we have to do all of that work all over again.
    No errors show in the log. IS THIS A BUG???????????????
    UPDATE: REFRESHING THE PAGE using the Browser Refresh Button Will show the new ROW....... THIS IS NOT GOOOD!!!
    Edited by: user8333408 on Jul 7, 2011 9:23 AM
    Edited by: user8333408 on Jul 7, 2011 9:24 AM
    Edited by: user8333408 on Jul 7, 2011 10:08 AM

    Thanks for the reply.
    The Project was in version 11.1.3 before I migrated. I had the issue above so I migrated to 11.1.1.4 then to 11.1.1.5 then to the New GREAT 11.1.2 to go by the matrix of support The issue is still there.
    Basic Page layout:
    SEARCH-MASTER-PANELTABBED LAYOUT (Hold all the CHILDREN RECORDS)
    PANEL TAB is made of ; SHOW DETAIL ITEM- PANEL COLLECTION- TABLE.
    the panel collection has a toolbar with 2 buttons in it.
    My issue varies:
    Hit create insert==> record count goes up one but the table does not render (it goes all blank even if records existed in it)
    Hit undo budo ==>table still not rendering. (click next on master record then click previous to come back, the table renders correctly.)
    other tables do the following:
    Hit Create insert == > table shows normally and I can enter new record.
    Hit undo ==> table count goes down but table does not render at all anymore.
    for this issue i noticed if i set cache results to false the table works after hitting undo
    IF I CREATE A NEW SHOW DETAIL ITEM and put exactly what the other tabs have in them and use the same layouts and buttons the new table works great!!!!!!!!!!!!???????????????????? WTF?!?!?!?!
    NO ERROR MESSAGES even at finest level are thrown.
    I HAD NO ISSUES IN THE PREVIOUS VERSIONS OF JDEV IS THIS A JSF 2.0 BUG????
    BY THE WAY JDEV 11.1.2 sometimes CRASHES or Hangs when viewing the Binding of Page when you click on Binding straight from the Design view. I have to open the Binding Page separate to view it. FYI
    Edited by: Nottallah on Jul 11, 2011 9:48 AM
    Edited by: Nottallah on Jul 11, 2011 9:51 AM

  • When I go to download my iMovie to iTunes I get the following message "Unable to prepare project for publishing.  That project could not be prepared for publishing because a error occurred"(disk full).  What do I need to do?

    When I go to share my Imovie to Itunes after a couple of hours I get the following message.  "Unable to prepare project for publishing.  That project could not be prepared for publishing because a error occurred(disk full)".  What does this mean and how do I fix it?

    This is the forum for iOS (iPhones and iPads),
    I have refered it to get moved to the correct forum.
    But my guess is that you have to clear space on your harddrive.
    The video gets rendered when you out put it, so you will need lots of space to do so.

  • Transitions are not rendering.  Help?

    I have used iMovie many times, but for some reason my transitions are not rendering now. I place them in and they do not render. I am also having a hard time gettin transition in because after I do one then it shows up as an error and asks me to close the program.
    Any ideas?

    I had a similar thing recently.
    For me the issue was that I'd put text on the clip it was transitioning too - as it can't render both the transition and the text it ignores the transition (it shows it's doing this by greying it out in the project browser).
    To get round it just drag the text a couple of seconds into the clip - essentially remove the overlap.

  • My Components are not rendering in Application

    My ocmponents are not getting rendered on screen....
    But in Design I can see the...
    SWf is not rendered:(

    More information is needed - are you saying the entire application isn't rendering when you're running in a browser?  Does the Flash player display appear at all? (Right click to see the context menu available to verify.) Is this after you deploy the application or just when you are starting the application directly from Flex Builder?  Did you alter or remove any files in your project's html-template folder?
    If you're talking about after you've deployed to a server, and you're not even getting a Flash player view in your browser (when you right click it would say 'About Adobe Flash Player'.. at the bottom of the menu), something is probably wrong with your html template.  It could also be something wrong with your build process (are you using Ant?)

  • Missing render file/project will not render

    I'm new to using FCE - just got my iMac with FCE pre-installed a few weeks ago - and have run into a big problem with current project. When I open the program, it tells me one render file is offline and I can reconnect or continue. I have no idea where the file could possibly have gone, so I select 'continue'. But now the project will not render. I have four sequences open in the project file, and have tried everything - locking and unlocking tracks, selecting various combinations of render both, render all, render selection, rendering only audio or video, etc. All the appropriate render selections are checked in every option. But still, the project won't render any of the sequences; the render box comes up for a split second and goes away faster than the eye can follow. I've tried setting the scratch disk; that didn't help. I tried saving the project, closing and opening the project, etc. Nothing helps. It just won't render. Does anyone have any idea how I can fix this problem?

    When I say it won't render, I literally mean nothing happens when I hit the render command. I see the red timeline render bars. However, I see them only when I go to export the video as something else - a mov, dv stream, etc. In the project while working, there's nothing indicating render is required.
    To try and solve this problem of the missing audio clip, I opened a new project and imported the .mov file I was working with initially, which theoretically should have all its parts intact. I made the necessary modifications to the file (essentially starting all over) and then attempted to render. It still won't render. Nothing happens at all when I click any of the render options, even after I've made modifications to the video that would clearly require render - changing the aspect ratio and applying a widescreen video filter. So the program should recognize the changes and render, but nothing happens, whether I choose render from the menu or hit the keyboard shortcut.
    I'm a little hesitant to try scrapping the preferences as suggested above, but I am totally perplexed.

  • Premiere Elements 12 not rendering

    I am working on a project and I noticed that in two clips brought in (both MP4) were not rendering.  In fact, there was not even a red line above the clips.  The other two MP4 clips rendered fine and show the green line.  So I deleted the two clips and then added them back fresh.  They now have an orangish line (not red) and they are not rendering to provide the green line to show they have been rendered.
    Any help on this is appreciated!

    javablood
    More later in the morning. But just leaving you with some things to check out.
    In Premiere Elements 12, the render indicator system is
    You are getting the best possible preview, no rendering possible since you already have best preview
    no colored line over Timeline content
    green line over Timeline content
    You are not getting best possible preview, rendering possible
    orange line over the Timeline content
    Above the Timeline is the Work Area Bar with two gray tabs. Those tabs need to span the whole content to be rendered. Are your gray tabs of the Work Area Bar doing that? If not, move them to span the content to be rendered. Keyboard shortcuts are
    Alt + [ for the left gray tab at the start of the content
    Alt+] for the right gray tab at the end of the content
    If none of the above factors into your present situation, you might want to post a screenshot of your Timeline setup in the Expert workspace of your Premiere Elements 12.
    Thanks.
    ATR

  • Themed Transitions not rendering in export to Quicktime

    I just created my first imovie 09 project. I was using the Bulletin board theme and the transitions work fine with viewing in iMovie. However, when I *export out of imovie to quicktime or itunes not all the transitions render.* Especially the bulletin board transition. There are some other "standard" transitions that are not rendering either.
    I am wondering if this is a bug or if maybe it is the settings like Frame per second and encoding that is some how cutting these transitions out. Since most of the transitions do render out to quicktime, I am going to guess this is a bug.
    Anybody have a clue?

    The file information shows:
    Apple MPEG 4 Decompressor, 960 x 540, millions 16bit, 29.97 fps
    I just watched the rendered quicktime again and noticed that some of the Bulletin board transitions did render later in the movie but at least one transition is not rendering. It is very strange and bit frustrating.
    I am not sure what it could be since it shows in the imovie full screen preview.

  • Stills not rendering

    When I added the stills to 'Stage 1' project, they showed in the sequence with red bars over them, (opposed to the video clips which are yellow) and I'm assuming means they're not rendered? Why wouldn't they be? When I opened 'Stage 2' it showed the same thing, stills red/video yellow. I'm guessing it's my settings or something.. any help in regards to why this might be or how to fix it would be greatly appreciated.

    jacqi_jones,
    The imported stills need to be rendered because they (most likely) have a much higher resolution than the video footage and, therefore, sequence setting. I think one's system RAM and memory usage settings can determine what Premiere Pro needs to render after import, but I'm not sure. Anyway, it's not a big deal to simply render the sequence after importing still images. Some things to help you out:
    This Help document discusses ways to prepare images for importing to minimize render time: Importing still images
    This forum post covers the issue of resizing the imported stills for this tutorial so that they appear fully, not cropped: Sizing JPEGs
    This video tutorial discusses: Why is there a red or yellow bar in my sequence?
    For what it's worth, the red render bars appear when I open the Stage 2 file too:
    Hope this helps!
    Stefan

  • Fcpx not rendering

    After 10 hours of work FCP x won't render and keeps freezing, I have force quit several times from the software freezing. I have reinstalled the software, tried throwing away render files, still not working.

    Hi Inncentius.
    I just got through doing a Render All on a sequence with a boatload of effects and title without a hitch. Maybe it's the particular combination of effects you're using? So if you want to post the details, I'll see if I can reproduce it.
    If you haven't tried trashing preferences I'd do that. (I realize that advice becomes monotonous after a while, but I have found it is the most reliable cure when my installation of FCP starts acting weirdly.) Another thing that comes to mind is corrupted render files interfering with the render process. You could test by starting a new project, linked to a new event, layer on the effects and trying a manual render. If that worked, go back to the original project and delete all project and event renders.
    Good luck.
    Russ

Maybe you are looking for