Project is not showing up in Color

I'll apologize in advance for how convuluted this is going to sound. Basically I can't get my projects from FCP to show up in Color. Any of them. I've been using FCP and Color for a couple years now without a problem and one day I finally figured out how to save my render files to an external drive. Woo-hoo. So I set the external drive and the next thing I know the footage won't show up in Color at all.
So I tried all kinds of things, including changing the render drive back and converting the footage to 422, but nothing worked. So I just went ahead and re-installed Color figuring I screwed something up when I set the external drive for the render files. I figured I'll start from scratch and if it worked for me with no problems out of the box, I should be all set. Nope, it still doesn't work. So I'm at a loss of what to try next here. Any thoughts?

delete your fcp preferences
https://discussions.apple.com/docs/DOC-2491

Similar Messages

Menu options not showing up in Color

The menu options, such as save and reconform, are not showing up in Color. They appear grey and I cannot click them. I have clicked out of my clips, what could I be missing? I am relatively new to Color.

Do you have a project open in Color? Did you "Send to" from FCP?

Once project is finished the project should not show in Dashboard

HI All,
In my cProject my project status in completed last month.
once my project is completed ,my project should not show in cProject portal in starting page under projects dashboard.
how to make once completed project not apper in project dashboard.
Thank,
Kumar reddy.

You can create a view in the project dashboard and filter out the statuses completed or canceled. User can always create local views, if needed for all users you can create a global view, call it something like "Active Projects" and set it as default.
By the way, which version of PPM are you using?
Edited by: Lashan Wanigatunga on Aug 1, 2011 1:22 PM

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

My sequence will not show up in Color 1.5.3 when sent from FCP 7

I cannot get clips from FCP 7 to show up when sent to Color. I had been able to get this to work perfectly fine earlier, but now for some reason, when sending a sequence from FCP to Color, Color doesn't automatically create a new project with the sequence in it. I've Googled for answers as much as I can, but cannot figure out what's going wrong.
By the way, the footage is from a Canon 7D, imported into FCP from PluralEyes 8.
EDIT: I've tried to manually export the XML from Final Cut into Color. Color will not even recognize the exported XML file. I've done what others have suggested online and deleted my Color & FCP preferences files out of my User/Library. I've created new FCP projects and tried to send to color from a new project. None of these have helped at all.

I just had this exact same problem. Clips from my FCP 7 sequence would not show up when I sent them to Color 1.5. No way. No how.
I solved my problem (at least for now) by simply restarting my machine. I realized that it had been running for days, and it probably just needed a reboot. Try it. It might work.
And yes, I'm running Mountain Lion, too. 10.8.2.
Good luck! ----Todd Ruel

Premiere 2014 queue, project does not show up in media encoder

When I queue a sequence in premiere 2014 and media encoder 2014 launches the sequence does not show up in the queue. I can do the same process in cc and it works.

In AME, please try disabling the option on the General tab in Preferences named "Import Sequences Natively." Then close and relaunch AME and double-check prefs to make sure the option remained disabled (we've had a few reports of cases where the setting reverted to Enabled). Now try queuing a job from PPro.
Also, please try dragging the sequence from Premiere's Project panel to AME's Queue, or to a preset in the Preset Browser.
What export format is selected? If you switch to another format, does the job get queued?

Project pictures not showing in browser

When I moved a project into a folder although the pictures are still listed in the inspector as being in the project they do not show up on the browser. How do I get them to show. I am using the vault system.

In the split view I see nothing when I select the project. When I select one of the albums below it the pictures show up in the lower line but not the upper part unless a lower one is selected.
I have done much since the controversial move so I'll have to wait till it happens again for a before & after. But these may help. This is the browser mode.

BI Projects Report Not showing data

Hi
I am a new to BI.I am trying to configure BI for Oracle Projects.So the problem here is couple of reports are not loading data on dashboard.
The issue is with Most of report that use data from Organization table
1.My BI is integrated with EBS.(I am wondering id HR security has anything to do with same)
2.Is there any step that should taken care while configuration?
3.Currently my log level is 3,But I am not able to see the query in Manage session.Show that I can get more information on specific table which is causing the query to return no data
Thanks in advance.

Hi,
The query is having some restrictions in the filter area. And also there are 2 conditions in the query.
I am checking the Multiprovider data with the tcode LISTCUBE. I am giving all the selections and the restrictions in the Multiprovider , some data is there in the multiprovider.
But in report its not showing any data.
Where shall I check, whetehr I need to check the MultiProvider assignment characterstics?

Project Spartan not Showing

Hello I just upgraded to the newest build of Windows 10 Preview and Project Spartan is not showing up in my taskbar nor my applications list. Is there something extra that has to be done in order to launch or view Project Spartan? Just as a FYI I have
tried it on 2 different computers and both computers are not showing it.

Don't just say " the newest build". Specify by build number.
Only build 10049 has Spartan. Look to bottom right corner, the build number is shown there., i.e. " Evaluation copy, Build 10049". Is that what you see ?
If it is confirmed that you do have 10049 installed, next to the Start button, there is a search box. Type Spartan in the box > does the word Spartan show up in the pop-up box ?
If yes, right click at it > click Pin to taskbar.
Does it work for you ?

Aperture project photos not showing up in iWeb

Hi, I posted this in the iWeb board as well, but have gotten no response.
I use iWeb to create a website based around my photography and a blog I update periodically. I have been using this combination for at least two years now with no problems. By the way, the OS is SL 10.6.2, the Aperture version is 2.1.4, I use iLife '09 and all current patches and updates for each of the above is current according to Software Update.
The problem I am experiencing is with the Media Browser in iWeb. For one project only, when I click on the project in the Media Browser, no photos display in the lower half of the browser. The project in question is a new one, but other newer projects are not exhibiting this behavior. For all other projects, albums, smart albums, etc. photos appear when the project/album button is clicked. I have deleted the plist file for iWeb, restarted iWeb and Aperture, rebooted the machine (iMac Core Duo 24" late 2007), and tried every other combination I can think of.
Does anyone have any idea of why this behavior is occurring and what I can do to remedy it? Thanks in advance for any help you can give.
Rick

Have you tried regenerating the previews for that Project? Go to the project, select all the images then choose Images >> Delete Previews followed by Images >> Update Previews.
Deleting the previews first isn't strictly necessary, but it's good to start with a clean slate.
DLS

Color Looks not showing up in Color FX tab, help!

I am running Color 1.5 on Snow Leopard, downloaded the Color Looks package and installed them in Users/Application Support/Color/Effects. However, even after a computer restart, the new effects are still not appearing anywhere in Color.
I have also tried removing everything from Color's effects folder in Application Support, but all of the effects still stay in Color's interface and function. This has me quite confused as to the source of Color's effects.
Anybody else had this problem? Is there some way to get Color to "refresh" and look for new additions to the Effects folder?
Thanks.

And the minute I post, I solve my own problem. Please disregard this post.

Photoshop will not show or print colors

photoshop will not show or print colors

Could you capture your entire screen with the layers panel open and post it here?

Run extenstion builder project problem not showing

i created extension in eclipse but i am not able to run it on adobe flash 2014 cc.
Not showing extension on windows menu.

delete your fcp preferences
https://discussions.apple.com/docs/DOC-2491

Working in FCP6, open a project, sequence not showing ANY fonts from motion master templates. Start new sequence and they appear fine. Whats up with it?

So here's what I've got: one of the first gen Intel Macbooks with 2gb RAM, running a fresh install of FCS2, fully updated. I pulled out my external with my project on it (saved in the same version), that I keep my demo reel updated on. I've always used the motion text master template files to label each clip and for some reason, this round the text isn't appearing. Let me be clear just how weird this is: the template file will show up in the viewer, but any file set in this sequence will be blank. If there is any graphics to the file, IT shows up, but not the text. I opened up a new sequence and and first added a new master file to it, and it showed up on that sequence. I then went to the old sequence and copy/pasted the clips in it to the new sequence and the text shows up as well. What is up with the original sequence that is causing this issue??? Any thoughts? (unfortunately, my copy of Final Cut is a "Not for Resale" (NFR) so I can't call in for support.
Thanks in advance!!!

Hi Miro,
I was just experiencing a similar problem today. In my situation I was getting the diagonal lines and the new project wasn't actually being trimmed, it was the same size as the original with all of the media from the original project .
It turns out that even though I was selecting 3 specific sequences out of 20 the Project Manager was ignoring that selection, it brought over those 3 sequences but all of the media from the other sequences. I think this is what was creating the problem.
The trim unused media box (or whatever the check box says) was greyed out.
My solution was to create a new clean project and import the 3 sequences I wanted to create a new trimmed project from.
Then using the Project Manager everything worked as expected, the project was trimmed down and there were no diagonal lines. I unchecked the "rename media" option, not sure if that was necessary part of the solution.
This seems like a bug to me, we shouldn't have to create a new project, it's an extra unwanted step and clutter on our systems.
Hope that helps!
I'm on Mac 10.8.5 and Premiere 7.0.1, eagerly awaiting to update once the bug fixes to the bug fixes are fixed.
Gerry

Manual color correction parameters not showing up in color board

Since update 10.1.3, I have not been able to manually color correct my clips. Prior to upgrade to Yosemite and FCP X 10.1.3, I would have been able to bring up the color board from the inspector 'video' tab under 'color'. Like the bottom image,
However, since the update I have not been able to see this, instead seeing the following,
When I bring up color board manually, I get the following
It's not the camera or the clips because I have used this camera on several occasion previously and had no issue. I tried using clips that I have used manual color correction before and the same issue has appeared. I'm wondering if its a new option to select or deselect and I'm not seeing it or something else.

Is that clip in a project? It looks like a browser clip. If you want to color adjust in the browser you have to use the open in timeline function (right-click on the clip) to open the clip container.

Project is not showing up in Color

Similar Messages

Maybe you are looking for