Project Lite - Admin tasks - Creating Users

We have a dedicated team who will only set up new users on O365/Project Online, can we use a Project Lite license for these staff who are only creating new user accounts?
They won’t be doing anything else in Project Online other than creating users.

Hi Dom,
In terms of the licence, I believe Dale is correct here.  However, having a Project Lite Licence does not restrict you from what you can do in Project Web App (to my knowledge at least), and so this is open to "abuse".  In terms of Project
Lite, it is aimed at TEAM MEMBERS, who plainly do not perform an admin role. Your local Microsoft Licencing Specialist should be able to provide ultimate clarification.
https://products.office.com/en-us/project/project-lite 
Ben Howard [MVP] | web |
blog |
book | P2O

Similar Messages

  • Error in the ISA User Admin to create users

    Hi all
    i am not able to create the users thru the ISA user admin. while creating the user for new contact persons we are getting the error as " User Does not Exist" and also while creating the user for existing contact persons we are getting error as " User already Exists". in our project landscape CUA also part along with CRM and Portal. i am not able to find out from where exactly we are getting the error either from CRM side or else from CUA side.
    Regards
    suresh babu

    Hi,
    You can open any process in an iview which is assigned to a page and to a role. Once you click on this role, the process will get initiated and the webdynpro application will be displayed.
    If you open the instantiating url, it will ask for the input parameters that are to be passed to the application and initiates the application. It does not display your webdynpro page.
    For the iview you have created, Assign this iview to a page, and then assign it to a role. Assign the role to your user id and then open the role. Also mention in the iview parameters if any role based information has to be passed.
    Award points if helpful.
    Regards,
    Sujana

  • Admin can create user for specific company

    Hi all,
    I have requirement to provide authoriaztion to 3 basis admin in the way that  they can use su01, pfcg or any basis related tcode but one should be restricted to one company say 'A' only... i.e. I have 3 basis admin A, B and C  on single system and 3 comanies say DEF, PQR and XYZ .  Now A can create use id for DEF company only...same for the rest of the user and company..
    Is it possible n what way ?
    Rgds
    D L

    Of course this can be done.
    Here you would be using the S_USER_GRP authorization object.
    Giving access this authorization will allow user A to only manage users in group DEF
    S_USER_GRP
    ACTVT 02
    GRP 'DEF'
    Giving access this authorization will allow user C to only manage users in group XYZ
    S_USER_GRP
    ACTVT 02
    GRP 'XYZ'
    Create user groups via transaction SUGR.
    Read more at:
    http://help.sap.com/saphelp_nw70/helpdata/EN/fa/f63f4222fab16be10000000a155106/frameset.htm
    Good luck
    Regards Fredrik

  • Restrict list of Organizations on Create User form

    Running OIM 11.1.1.5.0.
    We have a couple of companies using our OIM for delegated administration. In the Create User form, if the user searches for an organization they see a list of all of our organizations not just the ones that they can place a user in.
    If they place a user in an organization that is not in their auth policy they receive an error:
    "You are either not authorized to create user in XXX organization or not authorized to create user in XXX organization without specifying a value for manager."
    Is there any way to restrict the list of organizations in the search to the list in their auth policy?

    I have have this:
    Company A
    -- Department A1 (although these are actually set as Organization type Company in OIM)
    -- Department A2
    Company B
    -- Department B1
    User Management Auth Policy for AdminA:
    -- Data Constraint - Users who are members of Department A1, A2
    But when AdminA uses Create User he gets a list of all Company and Department names in the Organization search popup.
    Do I take it from your reply that this is supposed to work and it's something that I have setup incorrectly then?
    Edited by: Ewan on May 4, 2012 7:37 AM

  • Can we change values process data during create user running

    hi guru,
    can be idm change the value in during create user running.
    i have case in my idm :
    in my Task Create user code have to checking user in target system, if the USERID already in target system , my code will be update the USERID+ INCREMENT 1.
    so if the USERID+ INCREMENT 1 is OK . my code will be inserted to target system.
    my problem is :
    The Task to Generate have any task can be running if my task create user is successfully. the name of the task is CreateUserDB
    why in my task CreateUserDB . the UserID Value still used USERID not USERID+ INCREMENT 1
    can i used setProcessform to update value USERID in my Task Create user in my code or .??
    thank's
    darvesth

    What i would suggest is you create a pre-populate adapter for this User ID Field. In the adapter, use your code to pass in the current user's oim User Login. Then perform whatever validation is needed to see if the user id exists. If it does, increment your value. Then return the User ID you want to use. Then your create user task will use this value in it's process.
    -Kevin

  • Project Lite user cannot see tasks assigned ...

    Hi
    I have assigned tasks to a user Project 2013 and linked the project to Project Online.
    As the administrator, I see all my tasks in the Timesheet view in PWA but the users that use Project Lite canot view their tasks and cannot see them in their Timesheet.
    I am quessing it is a permissions issue but cannot find where to set the right permissions.
    Any solutions out there?
    Thanks.

    Hi,
    Have you correctly published the assignment of the user from the project (either PWA or MS Project Pro)?
    Is the user looking at the right period?
    Is the publish job successful?
    Is the booking type committed and not proposed?
    Is the resource the assignment owner of the assignment?
    Have you assigned an enterprise resource and not a local resource? When you go to the resource center, select the resource, can you see the assignment?
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Project Lite users cannot see Project link on Office365 toolbar

    Our Project Lite users do not see the PROJECT link in the Office365 toolbar.
    All other roles can see the link - these have either Project Online subscription or Project Pro for Project Online subscription.
    I have verified the following:
    These users have Project Lite and SharePoint online licenses assigned in the Office365 portal - user license area
    We are using Project Server permissions mode - with a custom Team Members group - that maps to the OOB Team Members group and My Task category permissions.   There are no custom category permissions set on the Resource- only custom Team group
    membership
    We even shared the PWA site with the members (Team Members for Project Web App)
    We are using ADSynch to synch users to the custom Team Members group via an O365 group.
    We are using the default \PWA - it is the only instance of PWA in the Office365 environment (E3 subscription
    These users can access the PWA by entering the URL in their browser - they just cannot see the Project link on the 0365 menu bar.
    Note:  The Office365 SharePoint online administrators have created a custom master page - but the PROJECT menu item is rendering for non-Project Lite licensees.
    Any ideas on the cause or how to get Project Lite users to see the PROJECT link on the O365 toolbar?
    LB

    Hello,
    Please can you confirm they are using the correct URL?
    It should be along the lines of https://<Company_Name>.sharepoint.com/sites/pwa/
    I ask you to check this as I have seen previously users not seeing the Project link when using a different URL.

  • Lotus Notes Connector: Resource is provisioned but the Create User task...

    Hi,
    I am getting some problems with the Lotus Notes Connector. The resource is provisioned but the Create User task is rejected. In the Lotus Notes server log, there is no problem and the account was created successfully.
    Below is the response OIM has set to the task:
    Respuesta: ERROR_UNID_SET
    Descripción de Respuesta: User created successfully. Error while updating user unique attribute in the process form.
    Notas:
    As you can see below, there was no error when the adapter was executed:
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisionsetPropertyEntered method
    INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::loadAttributeMapping: START
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision: :loadAttributeMapping : Attribute Mapping file : C:\oracle\oim9101\xellerate/XLIntegrations/LotusNotes/config/attributemapping_prov.properties
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisiongetParsedPropertiesEntered method
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisiongetParsedProperties---- END
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : CreateMailDb true
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : ShortName
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : SecurityType 1
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailSystem 0
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Storeaddbook true
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : SynchInternetPwd true
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : InternetAddress
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : CertifierIDFile C:\Lotus\Domino\Data\cert.id
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Registrationlog
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailOwnerAccess 0
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MinPwdlen 8
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Addbook true
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : RegistrationServer win2k3base/oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : OrgUnit during create -- oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : OrgUnit oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailQuotaWarning 40
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Received null values for ExpirationDate:
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getDefaultDate : Setting Default date
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : IdType 173
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailTemplateName
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailQuotaLimit 50
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : LastName : Gerente
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : IdFilePath : C:\Lotus\Domino\id
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailServer : win2k3base/oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : FirstName : Teste
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Comment :
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MiddleName :
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Location :
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailDBPath : mail\
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : ForwardDomain : oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisioncheckUserExistsEntered method
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Org Unit: oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Final UserName --- CN=Teste Gerente/OU=oimdev/oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisioncheckUserExistsExiting method
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Org Unit: oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Final UserName --- CN=Teste Gerente/OU=oimdev/oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : User Name: CN=Teste Gerente/OU=oimdev/oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Full Name: CN=Teste Gerente/O=oimdev
    INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : User Created Successfully
    INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : Invoking trigger AdminP
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : MailServer : win2k3base/oimdev
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::loadAdminpProperties : AdminP properties file : C:\oracle\oim9101\xellerate/XLIntegrations/LotusNotes/config/adminP.properties
    DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : AdminPCommand : tell adminp process all
    I've retried the Create User task and got the Lotus Console messages below. There is no error:
    10/20/2009 02:02:56 AM Admin Process: Checking for all requests to perform
    10/20/2009 02:03:30 AM DIIOP Server: 192.168.200.6 connected
    10/20/2009 02:03:36 AM Opened session for win2k3base/oimdev (Release 6.5.6)
    10/20/2009 02:03:36 AM Closed session for win2k3base/oimdev Databases accessed: 2 Documents read: 0 Documents written: 0
    10/20/2009 02:03:37 AM Certifying Teste Gerente/oimdev
    10/20/2009 02:03:48 AM Opened session for win2k3base/oimdev (Release 6.5.6)
    tell adminp process all >C:\DOCUME~1\ADMINI~1.WIN\LOCALS~1\Temp\rem22706.con
    10/20/2009 02:03:49 AM Admin Process: Checking for all requests to perform
    10/20/2009 02:03:49 AM Remote console command issued by win2k3base/oimdev: tell adminp process all
    10/20/2009 02:03:49 AM Closed session for win2k3base/oimdev Databases accessed: 0 Documents read: 0 Documents written: 0
    10/20/2009 02:03:49 AM DIIOP Server: 192.168.200.6 disconnected
    Any suggestion?
    Edited by: Renato.Guimaraes on 19/10/2009 21:04

    Sunny,
    I figured out the problem... Wrong configurations. See what I did:
    a) Reviewed the explanation below about the paramater certifierOU of Lotus Notes ITRes, so I set it to empty.
    certifierOU Specifies the OU of the certifier to be used when creating user accounts If you use a certifier on the target system, then you must specify the certifier OU value. If
    you do not have a certifier on the target system, then leave this parameter field empty.
    If there are multiple certifiers on the target system, then you must create one IT resource (of the Lotus Notes IT resource type) for each certifier. Refer to Oracle Identity Manager
    Design Console Guide for information about creating IT resources. If you specify a value for the certifierOU parameter, then the user OU value that you specify on the process form is ignored during the creation of a DN for a new user account.
    If you do not specify a value for the certifierOU parameter, then the user OU value that you specify on the process form is used in the DN. This feature ensures that only one OU value
    is included in the DN.
    If you specify a value for the certifierOU IT resource parameter, then user records for which the certifier OU value in the DN does not match the certifierOU parameter value are not
    reconciled. This is because the user DN is used to match records in the target system and Oracle Identity Manager, and a difference in the certifier OU value would lead to a
    mismatch in DN values. The following example illustrates this type of scenario:
    Suppose a user account on Lotus Notes has the following DN:
    CN=John Doe/OU=testcertou/O=test/C=US
    If testcertou has not been assigned as the value of the certifierOU parameter for any of the IT resources created on this Oracle Identity Manager installation, then the records of this
    user cannot be reconciled into Oracle Identity Manager.
    Sample value: NY
    b) The MailServer paramater was win2k3base/oimdev and I've changed it to CN=win2k3base/O=oimdev.
    c) As the certifierOU is clear now, so I have to inform the Orgnation Unit field in the process form.
    Thanks.
    Edited by: Renato.Guimaraes on 24/10/2009 23:19
    Edited by: Renato.Guimaraes on 24/10/2009 23:27

  • Password Violation error while creating users from Admin interface

    Guys,
    The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
    Current System:
    1. I have configured TAM Pass-Thru authentication for End User Login Application.
    2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
    3. I have custom password policies configured for different orgainizatoions
    Problem:
    1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
    2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
    Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
    Appreciate your help!!!
    Thanks
    Vijay

    Guys,
    The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
    Current System:
    1. I have configured TAM Pass-Thru authentication for End User Login Application.
    2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
    3. I have custom password policies configured for different orgainizatoions
    Problem:
    1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
    2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
    Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
    Appreciate your help!!!
    Thanks
    Vijay

  • OIM Provisioning - Error during OID Create User Task

    Hi,
    I am getting the following error during OIM Provisioning to OID (Create User Task).
    I added few more attributes to the OID_USR form and then to the "OID User" Process Definition.
    Also, I added the Code/Decode Key Values in AttrName.Prov.Map.OID.
    DEBUG,08 Dec 2010 21:19:04,547,[XELLERATE.SERVER],Class/Method: tcDataBase/readPartialStatement entered.
    ERROR,08 Dec 2010 21:19:04,555,[XELLERATE.ADAPTERS],Class/Method: tcAdapterMappingUtility/getRunTimeVariable Mappings encounter some problems: No data available for variable having key = 350
    ERROR,08 Dec 2010 21:19:04,555,[XELLERATE.ADAPTERS],Class/Method: tcAdapterMappingUtility/getRunTimeVariable Mappings encounter some problems: No data available for variable having key = 350
    java.lang.Exception: No data available for variable having key = 350
    Earlier, before adding these attributes, the OID Create User Task was working. So I belive this is from the newly added attributes.
    Questions:
    - How to identity the attribute with this key? It looks like some of the attribute values that it gets during Run Time is not populated correctly. Any suggestions?
    - "key = 350"- Is there a database table that this gets stored? SPD? or anything else?
    Regards
    Vijay Chinnasamy

    @Keviin,
    I added 13 new attributes and corresponding "* Updated" Tasks.
    For all these, ProcessInstanceKey is mapped to Process Data -> Process Instance.
    I am going to validate the mappings again. Also, I noticed, some of the fields that I am prepopulating is not populated.
    Regards
    Vijay Chinnasamy

  • How Do I Create User Account with "limited admin rights"?

    Hello;
    I would like to give a handful of users the ability to login to the DCC and enable them to add/delete/modify users and or hosts only, I.e. People and/or hosts.
    Is there anyway to:
    1.  Make a user with this admin capability?
    2.  Segregate the containers they are able to modify?
    Thanks to all in advance.

    BobM53, That would be needed regardless of what front end my users log in with, in my case I was looking for them to access the DIT via the DSCC/DCC, which is not possible.  Regardless, thank you for your reply, it is reassuring to know I am headed in the right direction.
    I am now looking towards installing something else like Apache Directory Studio, or some other GUI for users to manage the directory. 
    I will most likely create one or more ACI's to build groups, adding members to those groups as needed; each group being allowed to perform functions such as create users, lockout users, add/modify hosts, etc.
    I will most likely follow the steps outlined in:
    Directory Server Groups, Roles, and CoS - 11g Release 1 (11.1.1.7.0)
    Slightly OT, does anyone have a suitable and similar proven method to "lockdown" root accounts, and who has root access?
    Thank you

  • Workflow creating task for user in Outlook

    Is it possible to create a task in outlook for a specific user via workflow? My Boss want to have every user informed via mail that there is a new element in a list (that works fine) and one User should have a task (even better a complete to do list) in
    his outlook task tab.

    Hi Elite,
    Based on your description, my understanding is that you want to create the tasks for users in Outlook with workflow.
    I recommend to use workflow to create tasks in a task list in SharePoint and then sync the task list with outlook by clicking the button Connect to Outlook in the ribbon of the task list.
    After that, the tasks created in the task list will be automatically synced to Outlook.
    Please refer to the link below for detailed steps:
    http://netizenapps.com/blog/?p=6
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • How do we create user defined Task in OM & Which report we run for the Task

    Hi
    How do we create user defined Task in OM & Which report we run for the Task.
    Regards
    Rajesh

    You can create tasks using PFCT or path: Human resources> Organizational management> Expert mode> Task catalog in Easy access.
    Check this link may be useful for you: http://help.sap.com/saphelp_40b/helpdata/pt/fb/135d89457311d189440000e829fbbd/content.htm

  • To retieve tasks when user tasks are created using Jdeveloper BPELDesigner

    I am trying to get the list of tasks which are created using Jdeveloper BPel designer.
    I have used the following code :
    Locator loc = new Locator("default","bpel");
              IWorklistService taskService = (IWorklistService)loc.lookupService(IWorklistService.SERVICE_NAME);
    ITask[] tasks = taskService.listTasksByAssignee("rekha");
    if(tasks!=null){
    for (int j = 0; j < tasks.length; j++) {
    ITask thisTask = tasks[j];
    out.println("Task Title " + thisTask.getTitle() +"Assignee:"+thisTask.getAssignee()+"$$$$"+"\n");
    but its not returning any tests.
    But the same code works for the tasks which are created through sample bpel processes which are provided by oracle which uses TaskManager service.
    But the Jdeveloper bpel designer user task creates service which is TaskActionHandler..
    please help me how can I get the List of tasks for a particular user for this problem
    Please help me ............

    There is sample code that is supposed to do this here: http://www.codeguru.com/cpp/sample_chapter/article.php/c10789__12/
    I have tried using the login-style task retrieval with the oracle.tip.pc packages - this works logging in as, for example, fkafka.
    Working Code:
    IWorklistContext ctx = wlSvc.authenticateUser("fkafka", "welcome");
    Map filterMap = new HashMap();
    filterMap.put(IWorklistService.FILTER_TYPE_TASK_FILTER,
    IWorklistService.TASK_FILTER_MY);
    filterMap.put(IWorklistService.FILTER_TYPE_STATUS_FILTER, IWorklistService.STATUS_FILTER_ASSIGNED);
    String keywords = "";
    java.util.List tasks = wlSvc.getWorklistTasks(ctx, keywords, filterMap, IWorklistService.SORT_FIELD_TASK_TITLE, IWorklistService.SORT_ORDER_ASCENDING);
    Using the sample code and retrieving tasks with
    ITask[] tasks = worklist.listTasksByAssignee("fkafka");
    returns nothing, however.
    (&lt;h1>&lt;%= tasks.length %> tasks waiting for approval&lt;/h1>
    Prints: ' 0 tasks...' )
    I notice that the JDeveloper generated JSPs use the oracle.tip.pc packages - seeing as I'm deploying to the same BPEL server I guess I don't need to worry about the other methods of access (i.e. remote) so hopefully I can manage my workflow app with the oracle.tip.pc packages only.

  • How to create Users/Roles for ldap in weblogic without using admin console

    Is it possible to create Users/Roles for ldap in weblogic without using admin console? if possible what are the files i need to modify in DefaultDomain?
    or is there any ant script for creating USers/Roles?
    Regards,
    Raghu.
    Edited by: user9942600 on Jul 2, 2009 1:00 AM
    Edited by: user9942600 on Jul 2, 2009 1:58 AM

    Hi..
    You can use wlst or jmx to perform all security config etc.. same as if it were perfomred from the admin console..
    .e.g. wlst create user
    ..after connecting to admin server
    serverConfig()
    cd("/SecurityConfiguration/your_domain_name/Realms/myrealm/AuthenticationProviders/DefaultAuthenticator")
    cmo.createUser("userName","Password","UserDesc")
    ..for adding/configuring a role
    cd("/SecurityConfiguration/your_domain_name/Realms/myrealm/RoleMappers/XACMLRoleMapper")
    cmo.createRole('','roleName', 'userName')
    ...see the mbean docs for all the different attributes, operations etc..
    ..Mark.

Maybe you are looking for

  • Taking long time to turn on

    My macbook pro is taking really long time to turn on. I have brought it last June'2012 and I am using all updated versions. I really need to get rid from this problem. Can anyone help me ? Should I format my hard drive as I used to do for windows pc?

  • No File Name on Chat, and Small Item after forward...

    Hi Skype Friends,  i have updated my Skype earlier and i have been hard time about these updates..  i am familiar and more satisfied regarding the un-updated skype since it is user friendly. Thus,   There is no data file on your chat box regarding wh

  • Problem with Droid 4 (4Glte) producing static

    Recently got a Motorola Droid 4.   Phone causes intermittent static buzzing on PC speakers and clock radio whenever within about 3 ft.  Buzzing happens about every 30 sec and lasts about 10 sec.  Happens when phone is not being used. Not related to B

  • Bad date format in generated client API (weblogic server Workshop)

    Hello, i'm making web service client from oracle weblogic workshop. I have used "clientgen" Ant task to generate the client library. The WSDL indicates that certain fields are of type xsd:date.      <xs:complexType name="declarationType">           <

  • RFC Implementation problems with SUP iOS

    Hi All, I have two RFCs, the first one is quite simple with two string inputs (defined as load parameters) and the output without any table. The Second one has several output tables and several inputs (String) including an Inputstructure. The first o