Project Management ' unable to delete project set'

Hi
we are using oracle11i (11.5.10.2) on windows 2000 server service pack 4,database version 10.2.0.3 and Oracle Project patch set Level 11i.PA.L
while deleting prject sets we are getting error 'you have gained access to this page using the browser navigation buttons and therefore,cannot make any changes nor take any actions.please click return to portal and access this page using the application navigation'
Thanks
Regards
Umair

Umair,
Run the query in the following document to determine the patchset level for Projects on your instance.
Note: 420715.1 - Release 11i - Maintenance Pack, Patchset, and Rollup Patch Level for Projects
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=420715.1
Regards,
Hussein

Similar Messages

  • DKA790GX Platinum, Unable to delete Raid set.

    Back in mid February I wrote in with an issue regarding side port memory, this problem evolved to where the system would shut down even whilst in Bios. I used your wonderful flash utility to update the Bios from 1.1 to 1.3 and finally to 1.6 with no improvement, thanks again to Bas and Walker X for their kind input.
    The board was returned and six weeks later a replacement arrived, this new board is now up and running with a fresh installation of XP pro and latest drivers from MSI.
    The problem I have now, two of the samsung drives were setup as Raid 0 on the old board, when connected to the new board, bios changed to accommodate, from boot the drives are scanned and reported as ID 01 Mode 2+0 Raid 0 LD Size 639.99 Track-Mapping 65535/255/63 Functional. when I press Ctrl F to enter fast build utility, I am taken to the Bios setup screen? and not fast build.
    Any suggestions would be much appreciated.
    I would like to format these drives for re use, can I do this in windows or must I delete Raid set first via fast build utility?
    The fresh installation drive is disconnected during the above process.
    System spec.
    DKA790GX Platinum with 1.6 Bios chip.
    AMD Athlon X2 7750BE Retail.
    Crucial 2x2GB DDR PC2-8500.
    3X Samsung F1 SATA 11 320GB Drives.
    Jeantech Orchid 500Watt PSU

    Thanks Svet for your fast responce, please excuse my lack of knowledge on Raid, the above was the first Raid set ever configured.
    With Raid set to IDE in Bios, this shows as one drive (E) in my computer, do I format this?

  • Unable to delete a set of records from PSA

    Hello All,
    I am trying to delete a PSA request (INIT With data transfer) which had about crores of records. But in my PSA, I can still see about 16000 records from the earlier deleted request.
    Please advice as my next INIT is not brininging in any records. the issue is very critical...
    Regards
    Sneha

    Hi,
    Check out for any other History Init Request available in the PSA and delete it. Or use the program - RSAR_PSA_CLEANUP_DIRECTORY to clean the PSA Completely. Next, check out in the InfoPackage menu, Scheduler - > Initialization for source system, whether there is any successful Initialization request is available or not. If available delete the request by selecting delete from all the systems.
    Now, you can again use the Init Infopackage to initialize the delta.
    Regards,
    Geeta

  • ..Primavera\Project Management\PM.ini cannot be set to read-write status

    I have installed Primavera P6.1 in a laptop under Administrator Login.
    After that, when I log in to the laptop with my user Id, primavera fails to start and gives the following message:
    C:\Program Files\Primavera\Project Management\PM.ini cannot be set to read-write status.
    Kindly let me know how to fix this problem.
    Regards

    Please tell your IT Admin to fix as following:
    The following is a summary of the minimum system requirements Primavera 6.2.X requires for users to be able to access and run components of the
    software :
    Window Folders:
     C:\Windows\System32\
    dbexpsda30.dll
    dbexpint.dll
    dbexpoda30.dll
    DbExpPrC.dll
    dbexpsda.dll
    Read&Execute/Read permission for Borland DBExpress drivers
     C:\Program Files\Common Files\Borland Shared\DBExpress\DBXConnections.ini
    C:\Program Files\Common Files\Borland Shared\DBExpress\DBXDrivers.ini
    Read&Execute/Read/Write permissions to create and modify database alias connections
     C:\Program Files\Primavera
    Read&Execute\Read permission to access files needed to run applications
     C:\Program Files\Primavera\Project Management\pm.ini
    C:\Program Files\Primavera\Methodology Management\mm.ini
    Read&Execute/Read/Write permission to access the ini file - required to log into the applications
     C:\Program Files\Common Files\Primavera Common
    Read&Execute/Read permission to access files needed to run applications
     C:\Program Files\Common Files\Primavera Common\Java\BREBootstrap.xml
    Read&Execute/Read/Write permission to change connection parameters for Claim Digger or API
    (If user does not have WRITE access the Database Configuration Setup utility (C:\Program Files\Common Files\Primavera
    Common\Java\dbconfig.cmd) for claim digger / API DOES connect to the database and read the configurations and will create a new configuration if
    entered, but displays error "error writing to bootstrap file" and BREBootstrap.xml file will not be updated with the proper database connection information.
     Output directory for File > Export , Job Services output files and Log output files
    Read&Execute/Read/Write to create and write output files
    Registry Keys:
     HKEY_LOCAL_MACHINE\Software\Borland
    READ
     HKEY_LOCAL_MACHINE\Software\Primavera
    READ
    Note: For the functions Claimdigger, Update Baselines, and Schedule Comparisons the key is opened in Read/Write/Delete mode.
     HKEY_LOCAL_MACHINE\Software\Primavera\Databases\[MM/PM]\Aliases
    NOTE: By default, users have FULL CONTROL to their HKEY_CURRENT_USER\SOFTWARE registry keys
    If a user does not have FULL CONTROL permission to these keys, when they create a new alias it will be stored under
    HKEY_CURRENT_USER\Software\Primavera\Databases\[MM/PM]\Aliases and will be displayed and available to ONLY the user account on the
    workstation that created the alias.
    If user does have FULL CONTROL permission to to these keys, when they create a new alias it will be stored
    under HKEY_LOCAL_MACHINE\Software\Primavera\Databases\[MM/PM]\Aliases and will be displayed and available to ALL user accounts on the
    workstation.
    Jawad
    Novo Rail, Sydney
    P6 Project Controls Co-ordinator and Administrator

  • Premiere Pro CS  4   Project Setting

    Under  Project  Setting  and  under  Scratch  Disks,  Captured Video   switch   is frozen.  All  other switches work.  How can this be corrected?

    It is very likely that the drivers installed are up to 6 mos. out of date.
    For the video driver, you can go to Control Panel>System>Hardware>Device Manager, and go to the video adapter, where you can check the version and date of the driver under the Driver Tab. Go to the mfgr's. Web site, plug in your video card model, and your OS, and see which is the latest driver available. If newer, download it, read the instructions (they can change from version to version), then install.
    Pretty much the same for the mouse/pointer.
    Good luck,
    Hunt
    [Edit] Hm-m, John T. had posted those same instructions, but his Reply did not show, until I posted - wonky forum!
    Message was edited by: Bill Hunt - Added [Edit]

  • HT4847 I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do.

    I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do                             

    It still didn't work...
    Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
    APLZOD.resources
    BookmarkDAV_client.resources
    CoreDAV.resources
    iCloud.resources
    iCloudServices.resources
    ShellStreams.resources
    Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
    In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
    In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
    In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
    I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
    What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
    thanks!!

  • Help needed with project setting (640x480 30FPS)

    Hi
    I am sorry if this is a simple question, I am new to PE and video editing
    I have just purchased PE9 and working on a small project to put togather a family movie.
    The vide sources is from a Panasonic DMC-FZ28 camera, and looking at the file properties it is 640/480 (30 or 29.xx FPS depending how you look). the file is a .mov file.
    I keep reading about how important getting the project setting but I can not find anything suitable which is surprising as the format is not particulary odd.
    Having checked a few postings, I've seen recommendations to selects NTSC DSLR 480p 640x480, however, when I start a new project and look at projects settings avaiable under NTSC/DSLR there is a 480p 640x480 option but at 60 (or 59.94) FPS.
    Can you please recommend an appropropriate setting
    Many thanks

    Have a look at part 1 of my Basic Training for Premiere Elements tutorial series for Premiere Elements support site Muvipix.com.
    It will show you how to set up your project for NTSC 640x480p60 DSLR video (about as close as you can get to your specs).
    If that doesn't work, try experimenting by shooting in 1280x720 and using that DSLR setting.
    Also ensure that you have the latest version of Quicktime from Apple.

  • Unable to delete a custom report in Fabric Manager

    Hi there,
    If I create a Custom Report in Fabric Manager (3.2(3a)) I'm unable to Delete it aftwards :-(
    Get an "Error on Page.":
    Line: 388
    Char: 1
    Error: 'Delete560nClick' is undefined
    Code: 0
    URL: http:/xxxxxxx/s614.do
    Any ideas ? IE version I'm running is : 6.0.3790.3959
    Thanks!
    Mark

    I haven't heard of this issue before. Have you tried running FM on another host or upgrading FM to see if it goes away?
    Thank you.

  • Can I create a custome project setting?

    How do I create the project settings for footage with these properties: 1920 x 1080 47.95 fps? And some of the footage was shot with a 29.97 fps.

    linn749
    There is no project preset (project setting) nor export choice for 47.95 frames per second.
    The project preset of a project should match the properties of your source media so that the program is directed to establish the correct space in the Edit area monitor space for editing purposes. There is only one project preset for each project. When you have a "mixed Timeline content", you will need to set priorities and then fit everything else into the one setting.
    At export, you have opportunities for customizing the export settings under the Advanced Button/Video Tab and Audio Tab. And, what is exported will be as one as definied by the customized export settings.
    Can we assume that your "1920 x 1080 @ 47.95 frames per second is progressive and you are in a NTSC setup? If so, look at the project preset
    NTSC
    DSLR
    1080p
    DSLR 1080p30 @ 29.97
    Best set manually. For manual project preset setting, please see
    http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html
    Then import your videos into the project.
    We can talk about your export intentions next.
    ATR

  • Final cut project setting

    hi i need to make a projet in a 2600 x 600 frame size but i cant find a way to make a custom project setting.
    Does anyone knows how to do it ?
    I'm using FCX and have Motion and Compressor as well
    Thanks for your help.

    http://www.fcpxbook.com/CustomProjectSize.html

  • Premiere Elements 8 projects setting

    Trying to edit video in Premiere Elements 8 that is an AVI produced recording laptop screen with Camstudio (codec is DIVX). I have saved the video in MP4 format using H264 compressor since this format will be the one I use for videos imported from camcorder. When I compare the quality of the AVI video with the MP4 there is an evident loss of quality in the MP4. Tried different setting in the "share" section, same codec different bitrate, different codecs and different video size all with no improvement. Also tried different codec to record screen with same result. Reading around it seems that the project setting when opening a new project greatly affect the end result. Problem is I don't know wich setting would be the best for my video. Anyone ready to help?
    Video spec:
    container: AVI
    codec: DIVX (neme: DivX 4 -open DivX)
    pic size: 1366 x 768

    Because the video capture is from a computer monitor, the Frame Size is going to be a limitation in PrE (even up through PrE 11), since it offers only standard video Frame Sizes. PrPro offers a Custom Project Preset, where the Frame Size, and non-standard Frame Rates can be chosen to match the Source Files (no Scaling, etc.).
    Camtasia uses the TechSmith CODEC's, and when properly installed, can be used by PrPro (and I think PrE), but it is not freeware. Jeff Bellune, who provides a lot of info in that article on Camtasia/CamStudio, that I linked to, uses Camtasia and PrPro for all of his tutorials, seen on www.bellunevideo.com. That workflow is also used by Adobe in the Video2Brain training series, and for some AdobeTV tutorials, so you can judge the quality from those tutorials.
    The limitations of PrE will mainly be the differences between the Frame Sizes, and possibly the Frame Rate, from a video capture program, and then possibly the CODEC's used. For some more reading on CODEC's, see this FAQ Entry: http://forums.adobe.com/thread/546811?tstart=0
    Good luck,
    Hunt

  • Nikon D90 in CS3 - Project Setting?

    I'm waiting on delivery of some HD footage shot with a Nikon D90.
    I've never created an HD project in CS3; there do not appaear to be any presets for HD other than HDV. Can anyone advise on how I would go about setting up an HD project?
    Thanks!

    If you have the last updates for CS3 (which would be v3.2.0), you'll have both P2 MXF presets, and XDCAM HD/EX presets. Check what version you're running, and if you're only on 3.0 or similar, run the Updater (Help > Updates).
    You can create a custom project setting by selecting the General tab in the New Project dialog. There, under Editing Mode, you'll find an option called "Desktop" which lets you customize all parameters, including frame size, frame rate, PAR, field order and so on. Build one that matches your footage, and save it as a preset so you can go back to it later. There are quite a few threads here on the forums about editing D90 footage; a lot of them are about editing using CS4, but some are about CS3.

  • What is the correct project setting for a high definition slideshow?

    I'm using Premiere Elements 11 and when I drag my jpeg photos on the timeline, I see the orange line across them; when rendered, the photos are cropped.  The last time I successfully created slideshows was in PE 8 and I never had this problem!

    Please do not judge the photogenic quality of the slides I picked for these two slide show examples.
    The project setting is AVCHD 1080p60.
    https://vimeo.com/60952115 This is a 22 second video where, as a self training exercise, I tried the resizing suggestions from Bill, Steve and Ann in other threads on this same subject.  I found no improvement, or degradation, to quality or processing performance -- regardless of how I resized or didn't resize.
    https://vimeo.com/60904593 This is a 20 second, 6 random slide, video to verify resizing was not needed.  All  the slides were brought directly from my HDD into PrE11 with the "Add Media" function.  They are about 20MB each, in a Sony RAW format and original un-resized files.  There were no issues in the process. 
    Although not demonstrated in these two videos, the Pan and Zoom feature in PrE11 works wonderfully on these un-resized photos.
    Vimeo allows you do download the actual .mp4 files I uploaded if you want to look closer as the product. 
    It has been mentioned in other posts that resizing may well have been necessary in earlier versions of PrE and may still be needed if you lack a strong computer.  Nowhere, that I can find, is it mentioned as necessary or suggested in Adobe authored instructions or tutorials. 
    Other than project presets or video driver issues I do not know why PrE11 slide shows work so well for me and cause problems for others.
    For Steve, Ann and Bill, can I provide screen shots of PrE11 settings or samples of anything via DropBox?
    Bill S

  • Project Setting for Sony Steady Shot

    Hi, I'm using a Sony Steady Shot camera model DSC-W330 and will like to know what project setting to match the camera.

    What kind of files does that produce?
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/

  • Why don't I see the "Show Merged TOC in Child Project" setting?

    I have read about the "Show Merged TOC in Child Project" setting in RoboHelp 8 and have seen a screen shot of the build properties page where that check box is. But, when I go to build WebHelp, I don't see the same window. A number of the settings are different, and there is no "Show Merged TOC in Child Project" setting. I am using RoboHelp 8 (version 8.0.2.208 to be exact). I have pasted in a screen shot of the window that I see.
    The first screen I see when I build WebHelp looks the same as the screen shot in Peter Grainge's article on Merged Help. The screen above is the second one I see.
    Can anyone help? I'm mystified!

    Hi there
    Looks like you experimented with enabling Section 508. When you do that and toggle it back off, you are left with the Traditional style - no skin WebHelp. So back up a screen and choose a skin. Then you will see the option.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

Maybe you are looking for