Project Manager not trimming projects

when using project manager and creating a trimmed project the difference between the original nad new trimmed project is minimal
The large files within the project are H.264. Does Premiere have difficulty with this format as it seemed to work with Pro Res 422 (LT) files?

The previous versions of Premiere Pro did not support trimming of MPEG material via Create New Trimmed Project. It would copy the entire file(s). With the new Premiere Pro CC 2014 8.1 version, you have a new option for Consolidate and Transcode, which does support trimming of MPEG files to a chosen preset/format. Hope this helps.
Adobe Premiere Pro Help | Copy, transcode, or archive projects

Similar Messages

PP 2014 Project Manager not Trimming Clips

Project Manager pretty straight forward however the ProRes clips are not being trimmed. I tried both 24 and 0 (yes radio buttons were selected) but when I reopened the project the clips were full clips.
thoughts?

I'm having the exact same issue now and it seems to be related to what types of format Premiere supports for trimming.
My project consists of the following file formats:
XAVC 100Mbit MXF
XDCAM HD422 .mov
ProRes 422 .mov
If I remove XDCAM and XAVC from the project, Project Manager trims the clips, but if XAVC and XDCAM is in the project the files doesn't trim.
Adobe Help-page mentions this: "Some formats, such as Long GOP based media files, cannot trim media, or add handles." But it doesn't state what these "some formats" are. XDCAM is Long GOP, but XAVC 100MBit is Intra and shouldn't be affected.

Project Manager not Trimming ProRes Files

I was hoping that 8.2 would solve this issue, but it hasn't. When I choose 'Consolidate and Transcode' in Project Manager, it is not trimming my HD 1920x1080 ProRes files. And in fact, it hardly trims anything. (It does trim a few Avid 1:1 SD files) I've tried virtually every possible combination of settings to get this to work the way the old 'Create Trimmed Project' did, to no avail. Please help - thanks!

Premiere CC's Create New Trimmed Project does not support trimming of any MPEG material. If you update to CC 2014 8.1 or 8.2, there is a new option of Consolidate and Transcode that will allow you to transcode to formats that Premiere can export (e.g.: H.264, MXF OP1a, etc.). It still won't trim to .mts, but it might get you closer to your goals.
Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials
Adobe Premiere Pro Help | Copy, transcode, or archive projects

Project manager not trimming .mts files

Relatively new to Premiere and struggle to media manage since my switch from FCP7.
I keep finding that Project manager is not trimming the.mts files, so still stuck with the entire clips.
Anyone know of any work arounds?
Premiere Pro CC on a MacPro
Cheers

Premiere CC's Create New Trimmed Project does not support trimming of any MPEG material. If you update to CC 2014 8.1 or 8.2, there is a new option of Consolidate and Transcode that will allow you to transcode to formats that Premiere can export (e.g.: H.264, MXF OP1a, etc.). It still won't trim to .mts, but it might get you closer to your goals.
Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials
Adobe Premiere Pro Help | Copy, transcode, or archive projects

CS4 Project Manager not trimming clips.

Will premiere pro cs4 project manager trim the source clip file size based on in and out points?
I could swear I have done this before last year. When I do a project manager trim is creates a folder, changes the name of the file, but doesn't change the original size.
I created a project and imported just one clip , trimmed in from 1min to 5 seconds and dropped in into a timeline. After the proj mgr export the file wasn't trimmed in the new folder at all. I tried adding handles.

Thanks Jim. That little tid bit doesn't show up in the on-line help.

Project Manager not trimming R3D files.

Mac
CS5.5
I am trying to make a trimmed project. I go to Project Manager and I select "Create New Trimmed Project"
I include 24f handles, Rename Meda files to Match...etc
The Resulting (est) project size says 5GB when the actual project turns out to be 20GB.
Thoughts?
(Btw, I tried collecting and copying files and the it was the same size (20GB), same amount of footage in both folders)

PPro can't trim R3D files. It would require a RED codec to be able to generate new R3Ds... the best it can do is consolidate your project to just the media that's actually used in the edit.

Project Manager - Creating Trimmed Project w Handles, still leaving me with Huge Project

I'm trying to create a trimmed version of a completed Premiere Pro project, via "Project Manager...",
but I'm confused why I'm not getting a more condensed resulting project size.
This project consists of a completed 3.5 minute edit of a 2-camera conference video.
The majority of clips in the sequence are drawn from several hour-long clips in the master media folder, but the project I'm trying to archive and share
is this 3.5 minute highlight/digest piece. I was hoping I could send a trimmed project (sequence) to my finishing editor, without having to transfer all the media, and all the unused parts of some of these long clips,
and was under the assumption that "trimming" would accomplish this, however trying to make a trimmed version with handles in Project Manager, is still leaving me with a 90+gig project.
Exporting this sequence when selecting "Match Sequence Settings" produces a 694.7 MB .mpeg movie, culled from .mxf files (PMW300) and .mts files (C100).
What am I missing?
I also attempted to create an AE project by importing this PP project (1 selected sequence) into AE,
and reducing/consolidating and collect files, and was still being left with a 90+gig project (see attached)
Would love any insight or workflow tips!
(settings in Project Manager)
("Collect Files" folder from an AE export of the same project, creating 96+gig footage folder for 3.5min .mpeg video )

As Richard noted, Create New Trimmed Project is limited in the formats that it supports/trims. All MPEG formats will be copied in their entirety. i.e.: not trimmed.
Starting with Premiere Pro CC 2014.1 (8.1), Consolidate and Transcode was added, which may suit your needs. More information can be found at:
Adobe Premiere Pro Help | Copy, transcode, or archive projects
Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials

Project Manager not able to view their expenses

Hi all..
Project Manager is not able to view their expenses for a perticular project.
Can any one help..
Cheers..

Hi
Please elaborate....
On which release?
Which forms or html pages were tested?
Verify project manager is still active employee in HR, and has not end dated the role of project manager on the project...
Have you enabled any security extensions?
Dina

CS5.5 Project Manager not collecting all media

I am having a problem with the Project Manager in CS5.5.
Although I have used it succesfully in the past, on a current project I am trying to archive it is not performing correctly.
The issue is that the Project Manager is not collecting all the video clips when processing the project.
My project and its assets are contained in a folder and not scattered across my computer or multiple drive. The settings I am selecting are:
Selecting all sequences (11 in project)
Create trimmed project
Exclude unused clips
90 frame handles
Save in different folder on different drive
When I process, I am consistantly missing several video clips. They are a mix of avi and mov clips and they seem to be the same clips each time.
The clips are located with the other video files. They play just fine in the project but somehow they do not get included and trimmed when processed through the Project Manager.
Any idea or suggestions are approciated.

Any ideas? Anyone?

CC2014 Project Manager not keeping speed changes

trying to use project manager to consolidate a 40 minute sequence, everything looks good along the way, but any speed changes in the sequence are not keep in the new project....anyone else experience this? and is there a workaround?

Is this specific to this project (or specific settings) or are you seeing this in general? e.g.: if you create a new Project, apply Speed/Duration to a single clip in a Sequence (e.g.: 200%), then Consolidate and Transcode, does the Transcoded Project still have the Speed/Duration value applied to the clip in the Sequence?
I have not seen any reports on Speed/Duration missing and also ran a few sanity checks with Speed/Duration and Time Remapping in CC2014 (8.2), which all continued to have Speed values applied in the Transcoded Project Sequence. I also tried Collect Files and Copy to New Location, which also retained Speed values.

Project Manager not scanning Logic folder ?!

Hi,
The most funny thing about the project manager is that, no matter what, I can't have it list my songs, projects or audio files of any types, which are all strored in ~/Music/Logic (as by default settings). Other files stored in any location on my drive (even within ~/Music) are properly found and listed. I've tried rescanning a dozen times. Of course, I've checked that this folder is not excluded from the scan list. Force-including it doesn't help either. Weird, no?
Any idea?
Thanks in advance,
Arnaud

Correction and addition (I can't get the edit button to appear on my previous post):
It's just the songs and project (.lso files) that can't be recognised in the ~/Music/Logic folder, as audio files in that folder (or sub-folders) are seen actually. Other .lso files in other locations of the ~/Music folder are seen, as I was sying in my previous post.
Besides, this should not be a preferences or database file issue, I suppose, since LP was brand new installed for the 1st time on my MPB only a couple of days before I launched scanning with PM and noticed the issue.
regards,
Arnaud

SharePoint Project Management-Lots of Projects

Hi, I'm in the beginning stages of researching how project management works on SharePoint and how it can work with our projects. Every client would have a project and that would mean a lot of projects. We would create a couple different
templates for the different types of projects. It would be best if each project had it's own document library/calendar etc. How would this best be approached? We are regional, perhaps each region would have it's own area - or even each office
and the multiple projects would be under there? I'm looking for ideas for setup. Thank you!

Hello Nalani,
At one customer we had a site collection per department and a team site per project of that department. But it all depends on your organisation. How many projects and project documents are we talking about?
Btw, just for my understanding. Do you have other requirements besides storing documents of your projects? If you also want to manage portfolio, project plans, tasks, assignments, risks maybe Project Server can be an interesting thing to take a look at:
http://technet.microsoft.com/en-us/library/ff686783(v=office.14).aspx
- Dennis | Netherlands | Blog |
Twitter

Premiere cs6 unknown error during the project manager operation

It appears this is an ongoing issue that needs to be addressed by Adobe.
I remember back in CS3 this was an issue and it still appears to be unresolved. I'm using a Windows 7, HP Z workstation with Quadro FX graphics card, plenty of Ram, with an efficient RAID system. I need to provide a complete project (with files folder & assets in a central folder - maybe even trimmed assets) to my clients. The Project Manager create Trimmed Project continually fails, as well as Collect files and Copy to New Location. Following the Adobe instructions, no screensaver, turn off Premiere Autosave, don't use other programs that will impact machine usage - the results are still the same - unknown error - PLEASE ADDRESS THIS ISSUE ADOBE ! ! ! ! So my question is, When will Adobe address this issue?

This forum is mostly other users, with a "few" Adobe employees
You may need to contact Adobe directly... if some other user does not have a solution
Adobe contact information - http://helpx.adobe.com/contact.html

[CS5] Project Manager Trimming not supported for HDV footage?

Yes, I have the licensed version of CS5 Production Premium.
The Premiere Pro "Project Manager" allows you to create a "trimmed" version of your project. That is, only the footage actually used in sequences (along with some handles) is placed in the new, trimmed project. For example, I have a project which uses only 1 second of an 11 second HD Quicktime clip.
original project folder which includes the clip = 352MB.
trimmed project folder is = 26MB
My problem is with a similar project using only a small portion of an HDV clip (M2T):
original project folder = 232MB
trimmed project folder = 232MB
There is nothing I can find int the Adobe help file regarding limitations for HDV files with the trim feature. This problem is not limited to CS5. I experienced it also in CS4 but resolving it was not a priority at the time. But I now have a large number of projects I wish to archive.

Jeremy, I am assuming that this is harder to solve, because it gets into Premiere and/or the mainconcept codec being used, not providing smart rendering. You can't just take the middle of an mpeg clip without rendering. Premiere could do this, but there would be a quality hit. Is there any chance we will see a more sophisticated approach to mpeg inside Premiere? And I am also interested in whether the long gop formats are/might be addressed differently from others.
Todd, here is the CS5 help file that should have this.
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7c74a .html
And it does not.
In earlier versions (I'm still CS3, and I think it was CS3 in which there was this discussion), I found that you could not work around this by creating a subclip. In fact, the original full clip would be repeated for each instance of the subclip.
If someone adds a comment to this help entry, and it is a weak attempt, do you edit the comment so that the help file is most useful?

Project Manager does not slip clips in timeline (references pre-trimmed timecode)

Using project manager to trim down 100GB worth of ProRes 444 footage, the footage gets trimmed and imported back into the project fine using no handles but the clips on the timeline still reference the timecode of the old pre-trimmed media. All the clips on the timeline are crosshatched.
As I set it to trim with no handles I can slip each clip to the start but if there were any handles on the trimmed media this would be a nighmare.
Premiere CC
Windows 7
Chris

Hi benita,
It should be working as expected, sorry you are having trouble. It looks like the common denominators are ProRes footage and Premiere Pro CC (7.1). This is happening on both Mac and PC.
Related case here: http://forums.adobe.com/message/5853661#5853661
Please file a bug report and we will get to the bottom of this as soon as possible: http://www.adobe.com/go/wish
Thanks,
Kevin

Project Manager not trimming projects

Similar Messages

Maybe you are looking for