Project Manager not Trimming ProRes Files

I was hoping that 8.2 would solve this issue, but it hasn't. When I choose 'Consolidate and Transcode' in Project Manager, it is not trimming my HD 1920x1080 ProRes files. And in fact, it hardly trims anything. (It does trim a few Avid 1:1 SD files) I've tried virtually every possible combination of settings to get this to work the way the old 'Create Trimmed Project' did, to no avail. Please help - thanks!

Premiere CC's Create New Trimmed Project does not support trimming of any MPEG material. If you update to CC 2014 8.1 or 8.2, there is a new option of Consolidate and Transcode that will allow you to transcode to formats that Premiere can export (e.g.: H.264, MXF OP1a, etc.). It still won't trim to .mts, but it might get you closer to your goals.
Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials
Adobe Premiere Pro Help | Copy, transcode, or archive projects

Similar Messages

Project manager not trimming .mts files

Relatively new to Premiere and struggle to media manage since my switch from FCP7.
I keep finding that Project manager is not trimming the.mts files, so still stuck with the entire clips.
Anyone know of any work arounds?
Premiere Pro CC on a MacPro
Cheers

Premiere CC's Create New Trimmed Project does not support trimming of any MPEG material. If you update to CC 2014 8.1 or 8.2, there is a new option of Consolidate and Transcode that will allow you to transcode to formats that Premiere can export (e.g.: H.264, MXF OP1a, etc.). It still won't trim to .mts, but it might get you closer to your goals.
Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials
Adobe Premiere Pro Help | Copy, transcode, or archive projects

Project Manager not trimming R3D files.

Mac
CS5.5
I am trying to make a trimmed project. I go to Project Manager and I select "Create New Trimmed Project"
I include 24f handles, Rename Meda files to Match...etc
The Resulting (est) project size says 5GB when the actual project turns out to be 20GB.
Thoughts?
(Btw, I tried collecting and copying files and the it was the same size (20GB), same amount of footage in both folders)

PPro can't trim R3D files. It would require a RED codec to be able to generate new R3Ds... the best it can do is consolidate your project to just the media that's actually used in the edit.

PP 2014 Project Manager not Trimming Clips

Project Manager pretty straight forward however the ProRes clips are not being trimmed. I tried both 24 and 0 (yes radio buttons were selected) but when I reopened the project the clips were full clips.
thoughts?

I'm having the exact same issue now and it seems to be related to what types of format Premiere supports for trimming.
My project consists of the following file formats:
XAVC 100Mbit MXF
XDCAM HD422 .mov
ProRes 422 .mov
If I remove XDCAM and XAVC from the project, Project Manager trims the clips, but if XAVC and XDCAM is in the project the files doesn't trim.
Adobe Help-page mentions this: "Some formats, such as Long GOP based media files, cannot trim media, or add handles." But it doesn't state what these "some formats" are. XDCAM is Long GOP, but XAVC 100MBit is Intra and shouldn't be affected.

Project Manager not trimming projects

when using project manager and creating a trimmed project the difference between the original nad new trimmed project is minimal
The large files within the project are H.264. Does Premiere have difficulty with this format as it seemed to work with Pro Res 422 (LT) files?

The previous versions of Premiere Pro did not support trimming of MPEG material via Create New Trimmed Project. It would copy the entire file(s). With the new Premiere Pro CC 2014 8.1 version, you have a new option for Consolidate and Transcode, which does support trimming of MPEG files to a chosen preset/format. Hope this helps.
Adobe Premiere Pro Help | Copy, transcode, or archive projects

CS4 Project Manager not trimming clips.

Will premiere pro cs4 project manager trim the source clip file size based on in and out points?
I could swear I have done this before last year. When I do a project manager trim is creates a folder, changes the name of the file, but doesn't change the original size.
I created a project and imported just one clip , trimmed in from 1min to 5 seconds and dropped in into a timeline. After the proj mgr export the file wasn't trimmed in the new folder at all. I tried adding handles.

Thanks Jim. That little tid bit doesn't show up in the on-line help.

Project Manager - Creating Trimmed Project w Handles, still leaving me with Huge Project

I'm trying to create a trimmed version of a completed Premiere Pro project, via "Project Manager...",
but I'm confused why I'm not getting a more condensed resulting project size.
This project consists of a completed 3.5 minute edit of a 2-camera conference video.
The majority of clips in the sequence are drawn from several hour-long clips in the master media folder, but the project I'm trying to archive and share
is this 3.5 minute highlight/digest piece. I was hoping I could send a trimmed project (sequence) to my finishing editor, without having to transfer all the media, and all the unused parts of some of these long clips,
and was under the assumption that "trimming" would accomplish this, however trying to make a trimmed version with handles in Project Manager, is still leaving me with a 90+gig project.
Exporting this sequence when selecting "Match Sequence Settings" produces a 694.7 MB .mpeg movie, culled from .mxf files (PMW300) and .mts files (C100).
What am I missing?
I also attempted to create an AE project by importing this PP project (1 selected sequence) into AE,
and reducing/consolidating and collect files, and was still being left with a 90+gig project (see attached)
Would love any insight or workflow tips!
(settings in Project Manager)
("Collect Files" folder from an AE export of the same project, creating 96+gig footage folder for 3.5min .mpeg video )

As Richard noted, Create New Trimmed Project is limited in the formats that it supports/trims. All MPEG formats will be copied in their entirety. i.e.: not trimmed.
Starting with Premiere Pro CC 2014.1 (8.1), Consolidate and Transcode was added, which may suit your needs. More information can be found at:
Adobe Premiere Pro Help | Copy, transcode, or archive projects
Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials

CS5.5 Project Manager not collecting all media

I am having a problem with the Project Manager in CS5.5.
Although I have used it succesfully in the past, on a current project I am trying to archive it is not performing correctly.
The issue is that the Project Manager is not collecting all the video clips when processing the project.
My project and its assets are contained in a folder and not scattered across my computer or multiple drive. The settings I am selecting are:
Selecting all sequences (11 in project)
Create trimmed project
Exclude unused clips
90 frame handles
Save in different folder on different drive
When I process, I am consistantly missing several video clips. They are a mix of avi and mov clips and they seem to be the same clips each time.
The clips are located with the other video files. They play just fine in the project but somehow they do not get included and trimmed when processed through the Project Manager.
Any idea or suggestions are approciated.

Any ideas? Anyone?

CC2014 Project Manager not keeping speed changes

trying to use project manager to consolidate a 40 minute sequence, everything looks good along the way, but any speed changes in the sequence are not keep in the new project....anyone else experience this? and is there a workaround?

Is this specific to this project (or specific settings) or are you seeing this in general? e.g.: if you create a new Project, apply Speed/Duration to a single clip in a Sequence (e.g.: 200%), then Consolidate and Transcode, does the Transcoded Project still have the Speed/Duration value applied to the clip in the Sequence?
I have not seen any reports on Speed/Duration missing and also ran a few sanity checks with Speed/Duration and Time Remapping in CC2014 (8.2), which all continued to have Speed values applied in the Transcoded Project Sequence. I also tried Collect Files and Copy to New Location, which also retained Speed values.

Project Manager not scanning Logic folder ?!

Hi,
The most funny thing about the project manager is that, no matter what, I can't have it list my songs, projects or audio files of any types, which are all strored in ~/Music/Logic (as by default settings). Other files stored in any location on my drive (even within ~/Music) are properly found and listed. I've tried rescanning a dozen times. Of course, I've checked that this folder is not excluded from the scan list. Force-including it doesn't help either. Weird, no?
Any idea?
Thanks in advance,
Arnaud

Correction and addition (I can't get the edit button to appear on my previous post):
It's just the songs and project (.lso files) that can't be recognised in the ~/Music/Logic folder, as audio files in that folder (or sub-folders) are seen actually. Other .lso files in other locations of the ~/Music folder are seen, as I was sying in my previous post.
Besides, this should not be a preferences or database file issue, I suppose, since LP was brand new installed for the 1st time on my MPB only a couple of days before I launched scanning with PM and noticed the issue.
regards,
Arnaud

Project Manager not able to view their expenses

Hi all..
Project Manager is not able to view their expenses for a perticular project.
Can any one help..
Cheers..

Hi
Please elaborate....
On which release?
Which forms or html pages were tested?
Verify project manager is still active employee in HR, and has not end dated the role of project manager on the project...
Have you enabled any security extensions?
Dina

Performance Report Manager not posting png files

PRM on 3.5.1u1 will not generate png files for scheduled reports. However, when I run the report manually and post manually from the generated report, it works just fine. Any ideas on what I'm missing (directory ownership hasn't changed or anything like that)?

Do an unsetenv on DISPLAY environment variable and restart all services on the server layer from the same shell.

Media Manager not collecting all files to new destination - Why?

Specs: 10.5.8 / Final Cut Pro 6.06 / Dual Quad Tower -
So here's the conundrum. We've got a lot of video projects to backup (about 80) and move to another drive.
When we go to media manager and ask it to copy files over to a new destination, it grabs MOST of the files associated with the project. But without fail, it will not grab and copy all of the files that were sent to Soundtrack Pro. Any STAP file on Final Cut Pro's timeline gets left behind.
Why is this?
Here's a screen cap of our settings...
http://www.kchtenthusiasts.com/webpics/mediamanager.jpg
Any and all suggestions appreciated. Thanks!

Media Manager won't solve this for you; it's a game. You will need to manually locate and move tons of stuff like photographs, music tracks, movies from After Effects or Motion' almost anything FCP did not actually create.
You must carefully test each of your MM files. Very carefully.
Instead of relying on MM, ere's another possibility: Just clone your scratch/render/output drives and then remove stuff not associated with the projects. Then copy the FCP project files to the drives. This sometimes works for us because many of our projects use the same footage, over and over again. If we were using MM, we'd be copying the same stuff many times. If we just clone the drives the copies of the FCP projects easily relink to the footage in whatever source folder it might live.
bogiesan

R12 Winodws Install -- Concurent Manager not generation output file

Hello,
just install R12 VIS on windows 2003 server, all seem working find, but when I run "Active Responsibilities and Users" concurent requiest it completed sucsesfully but its not creating out put file
Please help.
Thank you,

no error in the logs, is just popup window "The concurent request ##### did not crerate an output file"
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDSCARU module: Active Responsibilities and Users
Current system time is 07-SEP-2012 16:03:48
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 5816743
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 07-SEP-2012 16:03:49
---------------------------------------------------------------------------

Audio Rec in project, but not in published file

i have recorded voice within the project and it plays fine
with the exception of PREVIEW PROJECT or in the published project
file. it just started happening (and i've done many projects). any
ideas what i could have done to break it?? thanks in
advance.

Hi Mike
About the only thing that comes to mind here to check is to
have you try and reset your Global Settings file.
To do this:
Close Captivate
Open Windows Explorer
Navigate to the following folder:
C:\Documents and Settings\????\Application Data\Adobe\Adobe
Captivate
(???? represents your user name)
Once there you should see a file named captivate_v30.dat
Delete or rename this file. The goal is to change things so
Captivate can't find it.
Restart Captivate and a new version of the file will be
created.
Give that a go and see if it corrects the issue.
Cheers... Rick

Project Manager not Trimming ProRes Files

Similar Messages

Maybe you are looking for