Project Master Data in PS getting changed ....

After the Project is released to PS from C-projects, if we change any
data in C-projects , master data in PS like Co code, bus.area, Profit
Centre, is getting changed to default.
this is creating a huge problem in our system. Once the PS master data
is updated for the first time, why the data is again getting changed,
if we do any changes in C-projects, like changing the project name.
Pl. let us know, what needs to be done ?
thanks
amit
Edited by: Virendra Pal on May 14, 2011 4:11 PM
Thresd moved to cprojects and RPM forum

Check your configuration. Have you setup transfer of Co-code from cProjects to PS?
If not, then this is probably an error. Contact SAP.
Regards,
Anuradha

Similar Messages

  • Error in Loading Project master Data into BW from R3

    Hi Experts,
    Actually I am trying to load Project Master Data from R3 to BW through a BW Process chain, Its a daily activity which we are performing since long time.
    But since last 2 days loading is getting failed with an error in ST22 in source system (R3):
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Exception              CX_SY_REF_IS_INITIAL
    Date and Time          27.09.2011 01:47:15
    Short text
         Access via 'NULL' object reference not possible.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "CL_CGPL_TASK==================CP" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
         caught in
        procedure "PREPARE_FOR_RELOAD" "(METHOD)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: "ME->OUTLINE_PARENT").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    I tried to reload the data but no help, I am not sure how to reolve this issue, I also contacted to BASIS even they are not aware of this error.
    I am seeking help from you guys.
    Please help to overcome this problem...!
    Thanks.

    it seems basis issue
    howver check below links
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/objects_objref_not_assigned-1793688
    OBJECTS_OBJREF_NOT_ASSIGNED error in a background execution
    thanks
    pathak

  • Abt master data activation and attribute change run

    There is any difference between master data activation and attribute change run

    Hi,
    Master data activation is activating the master data once you extract the data from source system the data will be in inactive state, so in order to make the data available we will activate the master data.
    Attribute change run :Its used to update the newly changed master data records to the Hierachies and aggregates.
    If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case we will use attribute change run.
    For attribute change run we have direct tcode: RSATTR or  In the main menu, choose the path Tools Hierarchy/Attribute Change.
    regards
    KP

  • Master data loads vs attr change runs

    Hi experts,
    I need to load master data daily and want to know the difference between attribute change runs and process chains for master data. Please explain with steps. I know how to create process chains.

    Attribute change run is nothing but adjusting the master data after its been loaded from time to time so that it can change or generate or adjust the sid's so that u may not have any problem when loading the trasaction data in to data targets.
    Whenever master data attributes or hierarchy is loaded an attribute chnage run need to be performd due to the following reasons:
    1. When a master data is changed/updated it gets loaded into the master data table as version "M"(modified). It is only after a attribute chnage run that the master data becomes activated i.e. version "A".
    2. Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.
    Re: Attribute Change Run
    Re: Attribute Change Run for Hierarchy

  • Master data is not getting displayed in the Report in Quality

    HI Experts,
    I have ZESP_Num as master for my transaction data.
    I have loaded the data in the Development and designed and checked my report. It is working fine.
    But after moving it to Quality. My report is not getting the master data.
    When I try to do right click manage ZESP_Num.
    I'm getting message like this.
    The data from the InfoProvider ZESP_NUM involved could not be checked
    Message no. DBMAN242
    Diagnosis
    A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
    Can anyone plz help me.
    Thanks

    Hi,
    Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
    Hope helpful.
    Regards,
    RAO

  • Master data is not getting displayed in the Query Designer

    Hi,
    I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
    The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
    I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
    The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
    Hope its clear.
    Please help.
    Thanks

    Hi,
    I have brought the Emp. No. in the Key Field and also have activate the master data again.
    Yet my Query Designer doesn't have the Emp. No.
    I have done a full load for both Master and Transaction.
    Please advice me what the other alternative.
    Thanks

  • Master Data is not Getting Updated Properly.

    Dear Expert,
    I am trying to pull the data by Info package but The text is not getting updated.
    The Master data object is    0BPARTNER .  To update this Master data , we ghave 2 info packages
    0BPARTNER_ATTR   and    0BPARTNER_TEXT.    But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
    What could be the Reason for this and How can I solve this issue  ?
    Tahnks,
    Utpal

    Hi,
    Could you please check the data in RSA3.
    If everything is there in R/3 side.Then,please check are you giving any
    condition in the infopackage .
    Please run the infopackage without giving any condition.
    Thanks,
    Saveen Kumar

  • Master data is not getting enabled in the InfoSet.

    Hi Experts,
    I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
    The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
    Can anyone please let me know how do I bring the master data in the query???
    Also please advice me whether I should have only 3 DSOs in the infoset.
    Please help.
    Thanks

    Hi,
    In my DSO I have an InfoObject called Emp No. in the Data Field.
    The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
    I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
    The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
    Hope its clear.
    Please help.
    Thanks

  • "Master data attr. of" un change source of update rule.

    hi,
    What is the importance of following in "change source" (characteristics) in update rules.
    1. master data attr. of
    2.initial value
    3. Source chars
    4. constant
    When and why these are used.
    Thanks in advance.
    Regards,
    Avneet

    Hi Avneet,
    Lets say Material group is an attribute of 0MATERIAL. You cube contains Material and also Material Group as a separate characteristic (not as navigational attr) becasue you want to store the value of material group as it was during the time the transaction happened.
    But here you transactional data coming from the source brings Material values, not values of Material Group. So in the update rule for Material Group, you can specify "Master data attribute of" 0MATERIAL. What the system will do is take the value of 0MATERIAL on this record and populate Material Group taking the value that is present in Material Master data.
    So if Material = M100 and Material Group is MG01 in master data, it will supply MG01 to Material Group char in the cube.
    Hope this helps...

  • Project Master data Auto Release -

    Hi All,
    I am new to Project Systems and do not know anything in Project Systems. I need all your help to make the following configuration changes in PS. The following is the requirement details.
    Capital Projects Auto Release:
    Fix configuration in SAP R/3 so that when an Capital Project master record (SAP transaction CJ11) is created it automatically goes to "Released" status when the record is saved.  No second action should be necessary to update the status from "Created" to "Released".
    Please explain me in detail, where I need to make the configuration changes in Project Systems.

    Look at user status for this. I don't have a system at the moment to describe in more detail.
    Cheers
    Hein

  • Change pointer for HR master data is not getting generated in table BDCP

    Hi,
    I have done all the required configuration for change pointer for HR master Distribution and it was working fine few days back. Now suddnly it has stopped working.
    Can anyone assist me on how should i debug it.
    Thanks
    Sunil Singh

    Hi Shital,
    Thanks for your Reply.
    I am not able to find that path in SPRO
    Basic Functions-> application Area
    And Also My change pointer configuration was working properly and it suddenly stopped working.
    I mean to say all the required settings was done previously.
    Anyways kindly let me know how should i proceed.
    Thanks
    Sunil Singh

  • Open Transactions in ECC for Master Data changes in MDM

    Hi All,
    I have a basic Design question on how to handle the impact of Data changes in MDM for any open transactions with that Master object. For eg if we have a Material set up in MDM and in ECC and there are open Purchase Orders for that Material, now if the Base Unit of Measure is changed in MDM and gets harmonized to ECC(After Workflow approval of the Change) how will it impact the PO attached to the material . Can we do any configuration in ECC that will restrict any Open PO s not to take the new changed value and any new POs taking up the new Base Unit of Measure , or can we set up an alert/notification that will trigger for a PO whenever any Master Data is changed and the PO takes the new changed value on the fly . What will be the best approach from a solution point of view .
    Thanks ,
    Prabuddha

    Hi Prabuddha,
    In ECC if a change happens to a master data not all the changes are reflected automatically in the open documents like open PO or open Sales order. Some fields values have to be redetermined for eg: "pricing procedure", some of them needs to be changed manually for eg: "Description". Moreover specific to your eg of Base unit of measure, this is a sensitive field and has lot of impact on the process so there for changing such fields it is necessary to close all the open documents against the Master data record in consideration. This fact is regardless whether the change happens through an IDoc or directly by MM02/XK02/XD02
    Prabudha, Please revert if you have further questions.
    Best Regards
    P T Manoj
    Edited by: PT MANOJ on Sep 2, 2011 10:25 PM

  • Transfer master data from a project from one client to another client

    Hi all,
    I have a training client and a production client.  The project master data has been created (Tcode CJ01) in training client with multiple levels and WBS.  Is there a way to transfer the master data from the training client to another client so there will be no need to create the same project in another client?
    Thanks.

    Refer note for 37899 batch input option.
    Though this pertains to older versions with few changes to code it might be suitble to the version you are working on.
    Regards
    Sreenivas

  • BP Master Data gets updated when (AR/AP) Invoice is raised

    Hi All,
    I am running SAP B1 8.8 and I discover that whenever AR or AP invoice is raised, it will update the business partner master data. On the master data of the particular BP where the invoice was raised, I went in and click on the change log, the date of latest update is the same as the date when the invoice is raised. I was wondering why SAP B1 8.8 is doing that? I am running the latest PL which is PL 14 hotfix. But I don't think it's PL 14, as I can see the history of te change log was created even before I updated my B1 to PL14 hotfix.
    I have done multiple invoices with the same BP, and it seemed the update only happened once, which was the first time an invoice is raised.  Just curious as to why the BP master data needs to be updated.
    Many thanks.
    Cheers.
    Kevin

    Hi Rahul,
    I have checked, no FMS. But do you get the same pattern though? When AR/AP invoice is raised a BP, then go that BP master data, click on its change log under tools. Do you see the latest date of the change is the same as your invoice date?
    Thank you.
    Regards,
    Kevin

  • Outbound IDOC not getting triggered while new master data is created

    Hi Experts,
    I am trying to trigger an outbound idoc for Cost Center master data when ever cost center is being created or cost center is being changed. (Usinf COSMAS)
    I have successfully made use of change pointers and now able to trigger the idoc when ever Cost Center is getting changed. But while creating new Cost center, IDOC is not getting triggered.
    I used the function module MASTERIDOC_CREATE_SMD_COSMAS for triggering the idoc.
    Could one of you please let me what would have gone wrong? Since IDOC is getting triggered while changing the master data but not getting triggered while creating new master data.
    Thanks in Advance,
    Vinoth

    Hello,
    when you activate BD21 for a message type, it creates a entry in the SAP tables. that these Cost Centers have been sent already and any susequent changes to this will trigger a IDoc.
    As for BD16, scheduling it wont help as, you need to specify the selection criteria, and i do not see how you will be able to dynamically get the selection criteria.
    Try BD95, and BD59 to create a change pointer for a field, so when ever this fields is modified (new/updated) an idoc will be triggered.
    regards,
    Abhishek

Maybe you are looking for