Project missing in Event

I got the filestructure right, got a Final Cut Event folder and Final Cut Project folder on my mediadrive
I had a kennelpanik shotdown, and after that when I open FCX the project I was working in is missing
the Project is in the FCP Project folder, as well as all the renderfiles (207GB, it is Timelab)
anyone?

I just had the same problem. If you ever got up and running again without having to re-create your project or timeline, I would love to hear the solution.
thanks

Similar Messages

First event, then project missing

I have search the web to find answers for this question, and it seems may people have similar problems, but I cannot find an answers. Hope somebody here can help.
After opening iMovie, I noticed one of my events was empty. The file was stil present in the iMovie event folder, but did not show in the event. I found a solution where I had to change something in the source code, I think the plist file. I saw there that it reffered to a .mov file, however the source was a .dv file. After changing it (with txteditor) and opening again now the project using the event (which was showing triangels befor) was now gone. Stil present in the folder, but not in iMovie itself.
I opened the package of the project and change the 'project' file in txteditor also, because this also reffered to the .mov file, not a .dv file. But I have not been able to repair either the event or the project.
Can somebody help?

Update: moving my event to an external harddrive (using iMovie) has solved the problem with the event. The event even shows (by underlining) which clips I used in the project. However the project still does not show, is missing.

I have just updated to Final Cut Pro 10.1.4 - I have updated Projects and Events on my external hard drives (off the File menu). It's says under several project 'missing file' - but they were all there working fine before I updated.

I have just updated to Final Cut Pro 10.1.4 - I have updated Projects and Events on my external hard drives (off the File menu). It's says under several projects 'missing file' - but they were all there working fine before I updated. I am working off 2 external drives - not sure if that would make a difference.

After the update each seperate connected drive should now have a seperate Library.
The older Projects and Events folders would have to be at the top level of those drives go be seen and updated.
Were all the necessary Projects and Events in the corrrct place before updating?
Al

Photos in library missing from Events? I have a solution

This is a continuation from an answered question here: https://discussions.apple.com/message/15830476#15830476, but with a new twist and a solution that I found myself. Hope it helps others:
After doing a corrupt library rebuild, I noticed some photos missing from events but still existing in the library. Read the above discussion for full background then come back if you'd like.
I found photos that I could see in "Photo" view but could not see in "Events" view. I even chose one particular photo by filename. When I searched for it while in "events" view, it appeared as the sole result but it did not have an event name above it like it should have (check this by searching for a photo by name while in "Events" view). It was just sitting there like a sad eventless orphan. So I grabbed that photo with my mouse pointer and dragged it over to the navigator bar and dropped it on "Events". And this worked! I now had a new event with only that photo in it and the event was named the same name as the photo. Now the photo was magically back in Events. Since this problem was occurring with a lot of photos we took over the last month and they were intermingled by date with other photos taken over the last month (from other cameras or imported from email attachments) that were correctly in "Events", then I went to the photo view, grabbed a whole bunch of photos, many of which were not in an event and some that were, and dragged them over to the "Events" item in the tree and dropped them on it. It gave me a warning like "These photos cannot be in two events at the same time so they will all be moved into a new event" with an option to "Cancel" or "Create". I hit create and oila, I had a new event that graciously adopted all the sad orphan photos and also kidnapped some photos from other events too. I just went in, reorganized them back to proper places (thank goodness they were all recent and there were only 250 or so and not 1000s) and I am happy. Provided this works in the long term, it was an interesting workaround for a bug that I don't know the cause and I'm glad to share with all of you.
By the way, I'm using Snow Leopard and iPhoto 09' with all the lasted software updates on an Intel iMac Core 1 Duo.

By the way, I was able to confirm now (I think) that all photos in the library are assigned to events by looking at the totals in "Photos" and matching it with the sum of photos and movies when "Events" is selected. Unfortunately, I didn't check to see if this was also the case before I did my fix, but if anyone is missing photos in Events that are definitely visible in the Photos view, please check these to sets of numbers and see if you can identify the discrepancy before applying my fix. That would be good proof of the bug.

My iPhoto 11 is missing several events following last import, however I can see the missing events using Aperature.

Hi I'm missing several events in my iPhoto library following my last import. If I open up Aperature to access the library I see all of my events, does this mean my library is corrupt? I've already tried repairing the iphoto database, rebuilding the thumbnails, and rebuilding permission all without success. My last option is rebuild the database. Has anyone seen this issue?

I don't use Aperture so don't know how it works in relation to viewing the same library as iPhoto. There may be some cache that Aperture is viewing.
You can also try this:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Missing Mouse Events

I’ve noticed that it is possible to miss mouse events
if you move the mouse very quickly. For example, if you quickly
move the mouse off a control, you can fairly easily miss the
MouseOut event. Is there a Best Practice way to get around this?
Thanks!!

If you move your mouse quickly over an object, you can fairly
easily miss the mouseout event. This is especially true if the
object you are moving the mouse over is fairly small.

Missing Calendar Events

Missing calendar events when viewing on Treo 755p (Sprint). My computer email/calendar will show 5 meetings, but Treo will only show 2. Email and Calendar have been sync'd. Help?
Post relates to: Treo 755p (Sprint)

I am having the same problem. The calendar in Outlook will show the event/appt and some of them sync across. If it doesn't show on the phone, I can move it in outlook and it will then show up on the phone, but another appt/event will be missing. Almost like it has a maximum number of events or something.
Jeff
Post relates to: Treo 750 (Cingular)

Random sequential groups of photos missing from Events and iPhoto Slideshow but are in an Album. How do I recover or copy photos back to Events and rebuild slideshow?

Random sequential groups of photos missing from Events, an Album I created, and a slideshow using the photos. This "appears" to have happened when upgrading to Yosemite. When I use iPhoto Library Manager, I see two entries for the Event Information for the date in question, same name, same number of photos, but different sizes. The smaller has the image number but no photo for the given date; the larger has the photos.
Image path for the version with all photos: /Volumes/Promise Pegasus/Pictures/iPhoto Library/Previews/2010/2010_05_24/IMG_0697.jpg
Image path for the version with missing photos: /Volumes/Promise Pegasus/Pictures/iPhoto Library/Previews/2010/2010_05_24_2/IMG_0697.jpg (NOTE the _2 added to the image number.)
I assume that I have to get the missing pictures back in Events so I can reload back into the Album. Hopefully, the slideshow will magically be better.
Help!

That's an indication that the link/file path between the thumbnail and the master file has been broken. Do the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.

How to backup all project to a event library

How is it posible to make a backup for all project to an event library?
I can only see how to backup a single project to an event library.
Thanks for any help.
Best regards
Keld
Copenhagen
Denmark

This is the Final Cut Studio forum. The FCP-X forum is located here:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x?view=discussions
-DH

My current project in the events library has gone into list mode. ie a single clip on the left, one above another, so showing only about 7 clips. how can I get it back into normal horizontal mode

My current project in the Events Library has gone into list mode. ie a single clip on the left one above another, so showing only about 7 clips. How can I get it back into normal horizontal mode?

That's about what it's supposed to look.
How do You want it to look ?
a. You can change places by using this
b. May be You changed this top right symbol of an hard disk ?
c. or changed the number of frames to be viewed ?
d. OR - it can (at least for me) be so that You think of how it looks in iPhoto. (To me a very common mistake)
Yours Bengt W

When I go to save my unfinished imovie project, neither of the "imovie projects" or "imovie events" are visible where they should be. Why is this?

When I go to save my unfinished imovie project, neither of the "imovie projects" or "imovie events" are visible where they should be. Why is this?

The latest version (iMovie 10) doesn't have iMovie projects and iMovie events folders - these were for iMovie 9 and earlier. In iMovie 10 Projects are in Events and Events are in Libraries. When you quit iMovie the current status of your projects and events are automatically saved in the library so there is nothing to do. The default location for libraries is in ~ / Movies folder but you can put them anywhere, such as on an external drive . If you want to backup the library you can make a copy of it on a separate disk or memory stick using the Finder.
Geoff.

When I sync my entire photos from iPhoto to IPad or IPhone, I'm missing 3 events, any suggestions?

When I sync all my photos using iTunes on my MacBook pro with Lion to my IPad or IPhone, I'm missing 3 events, any suggestions?

See if Deleting the Photo Cache Helps,
Delete Photo Cache
http://support.apple.com/kb/TS1314
Goto Home > Pictures > iPhoto Library...
Right Click and choose Show Package Contents...
Find the Folder called iPod Photo Cache and drag it to the Trash...
Close the Finder Window..
That’s it...
Syncing Photos with iTunes
http://support.apple.com/kb/HT4236

ProjectUID selected from the reporting database from Project Server OnPublished event is taking some delay

Hi all,
I'm invoking a stored procedure from the reporting database from the project server onPublished event. I'm having some issues in getting the details of that particular project from the published event handler. This i noticed that there is some
delay is taking place in moving the data(project uid ) from the published to the reporting database .
My stored procedure select statement is as follows:
SELECT ProjectUID, ProjectName FROM MSP_EpmProject_UserView
　WHERE ProjectUID=value
This stored procedure is invoked from the onPublished event of the project server event handler where that particular projectuid is passed in that stored procedure.I have noticed that some delay is taking palce to move the data into the reporting database.
My stored procedure got invoked from the onPublished event of the project server event handler before the delay is complete. So the row selected from the stored procedure is alwys zero (0). Is there any other method to wait for repoting database
to get refreshed. Please help me .

Hi sabithad,
The issue you are facing is because of the conflict of permissions, event handlers always works through administrative user credentials whereas the project is open in edit mode by the logged-in user. And you are tyring to update custom field at the back
end with Administrative credentials, while project queue is in process by logged-in users credentials. Its not gonna work this way :)
The best option is to use Javascript on your PDP using CEWP, you can either build your complete logic in JavaScript and place that code on your PDP. OR you can use the combination of JavaScript and PSI and create a webpart to be placed on PDP.
below blog link willgive you directions to go ahead with, but for sure the solution to your query is
JavaScript :)
http://epmxperts.wordpress.com/2012/05/21/generate-unique-id-for-project-using-a-webpart/
hope this helps.
Khurram Jamshed - MBA, PMP, MCTS, MCITP (
Blog, Twitter, Linkedin )
If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

Can I or how can I move my "Project Library" and "Event Library" to an external hard drive and work from there?

I am running low on hard drive space and would like to move my imovie "Project Library" and "Event Library" to an external hard drive. I cannot figure out how to find these libraries on my hard drive to move them. How do I tell iMovie to look to the external hard drive to find them?

You need to do all moves from within iMovie so you do not break the links between your projects and your events.
First you need an external drvie that is formatted as Mac OS Extended (journaled). FAT32 drives will not work, but can be reformatted using Disk Utility.
In iMovie, click VIEW/EVENTS BY DISK.
In the Project Library you should see all properly formatted disks as well as your current projects. Hold down the Command Key as you drag the small icon for the project to the small icon for the external drive in the Project Library List. Repeat for all projects.
Now do the same for the Events. Command-Drag the small icon for the Event to the small icon for the external drive in the Event Library List.
Note: If you drag, rather than Command-Drag, you will Copy rather than Move.

How can I export an iMove Project if the Event file was deleted? (Missing Media error message)

Deep iMovie question:
I accidentally deleted various EVENT files from my iMove EVENTS folder. Yes, they are really gone ... this is NOT a matter of restoring them from the trash.
The projects are still there ... I can still watch the projects as long as I am in iMovie ... but if I try to export the Project I get the MISSING MEDIA error message.
Logic tells me that if I can view the project ... the file has to be SOMEWHERE inside my computer ... else I couldn't be watching it ... right? I mean what am I watching if not some file somewhere which has moving pictures stored in it?
So HOW do I get to something I can export? What am I watching when I watch the project?
I have iMove 08 on iMac with OS 10.6.8
Normally works great for my simple needs ... except if you move or delete an event file ...
Can anyone out there help?
thank you,
Natasya

If you don't have the original files then I'm afriad you don't have anything to work with.
Regards
TD

Project missing in Event

Similar Messages

Maybe you are looking for