Project My Screen keeps Searching...

Trying to make Project My Screen (PMS) working.
Lumia 920 with Windows Phone 8.1
PMS application installed on Windows 7 laptop.
USB cable connected.
When starting PMS on the phone it keeps Searching...., PMS on laptop remains black.
I already did most of the troubleshooting that can be found on the internet, like:
-uninstall USB drivers (Nokia USB connectivity) in the laptop/device manager .
-remove windows phone from laptop/device manager/portable devices.
- auto reinstalled fresh USB drivers on laptop
- tried different USB cable
- software on Lumia is up to date
- Factory reset of the Lumia
- I connected the phone to a different PC (Win 7), same result.
- I updated a different phone, Lumia 720, to Windows Phone 8.1 software version , and connected it to a PMS enabled laptop,
same result.

Boot from your install DVD and see if it does it. If it does, you have a hardware issue.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Similar Messages

1.my iphone 4s keeps searching for service ... 2. it isnt recognized by itunes or my pc 3. im stuck on the activation screen as a result .... i need help

1.my Iphone 4s keeps searching for service ...
2. it isnt recognized by itunes or my pc
3. im stuck on the activation screen as a result
....i need help

Hey Jadonalecwilson,
Thanks for the question. If I understand correctly, you have a few issues with the iPhone. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Get help activating your iPhone - Apple Support
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

Please Help...why does my screen keep going to black in fcp?

I have just brought imac g5 (older version through private sale) and completed a beginners fcp course. When and got a lacie 250 , shot some stuff which I managed to capture! Then just tried to open project and now the screen keeps going to full black and I don,t know what to do! I would like to do a full system check and make sure all settings correct and to know why screen blacking out. I am very new to mac and don;t feel that at home with settings etc . Any advice would be very welcome and appreciated as I just want to practise now but I am stumped at the first hurdle!
ta
ali

New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
If we use the forums properly they will work well...

Desktop screen keeps flashing black and dock has disappeared. iMAC X Yosemite 10.10.1

Recently I updated my iMac to OS X Yosemite 10.10.1. All was operating smoothly for a few weeks until one day i started up and logged in my dock was nowhere to be seen. The desktop screen started flashing black replacing my desktop image. None of my desktop icons disappear when this happens. screen keeps flashing black every few seconds. Also the dock has disappeared.
I have restarted in safe boot and it makes no changes.
iMAC X Yosemite 10.10.1
Please help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever...

My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever... I have tried to reset the network few times, but not working.

Hello Nazer_502,
I would be concerned too if my iPhone was acting this way. It sounds like it is overheating and not holding a charge. I recommend following the steps listed below when experiencing an issue like this:
Battery life seems short
Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
Try turning iPhone off and then on again.
Connect iPhone to iTunes and restore iPhone.
If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error on installation: printer keeps searching for updates.

I get an error on installation: printer keeps "searching for updates" Installation is OK, printer works, but because of the continued messaging on the printer, the screen on printer is unusable. Any ideas?

Hey @Rooms ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
I understand that you are getting a message on your screen that doesn't go away and it says "searching for updates".
Are you still experiencing this message or has it gone away by now?
Have you unplugged the printer and waited for a few minutes and then plugged it back in?
Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
Let me know the answer to all above questions. Have a great day!
I worked for HP.

Why does my I phone 3 keep searching for signal

Why does my I phone3 keep searching for a signal

Hi jodierigby,
Thanks for using Apple Support Communities. This article has steps you can take if your iPhone is unexpectedly powering off:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Cheers,
- Ari

Ipad opens first page, but has trouble opening more pages, just keeps searching.

Ipad opens first page, but just keeps searching for additional pages.

ha99 wrote:
Ipad opens first page, but just keeps searching for additional pages.
First page of what? I assume that you are talking about Safari and not a book in iBooks, the Kindle app or the Nook app.
Clear Safari in Settings>Safari>Clear History and website data. Then reset the iPad by holing down on the sleep and home buttons at the same time until the Apple logo appears on the screen.

Battery screen keeps popping up

In my TX when I turn it on and try to work with it the battery screen popps up and I cannot get rid of it. the unit is fully charged and it states that. It causes the touch screen part to seem miss aligned, but if I can get the screen to go away, the touch screen sync works fine. Why does this battery screen keep popping up.
Not to computers smart
Post relates to: Palm TX
This question was solved.
View Solution.

Hello and thank you for using the Palm Help Forums!
You may want to clean the touchscreen. It could be click the item on its own if there is some dust or dirt on it. Also, clean the outside of the touchscreen with a business card. If you notice this problem still occurs after cleaning the touchscrenn try a hard reset. This will erase all data on the device and restore settings to default. Be sure to back up your information by syncing it to a computer. For further information and instructions on hard resets, please visit kb.palm.com and look up article number 42094 in the Solution I.D. search field.
I hope this helps and let me know if you have any further issues.
-Pat
Post relates to: Treo 800w (Sprint)

Screen keeps saying Setting date and time, tried to reset and or restart still won't reset

Screen keeps saying Setting date and time, tried to restart and reset but does not work,did follow direstions unplugging apple TV still not resetting/restarting, any help?

Aha! A bit more searching and I found the answer that just fixed it for me.
Press Menu and the Back arrow at the same time until a broken chain icon appears on the top left of the screen.
Let them go....
Press Menu and Right arrow (forward arrow) until a "fixed" or "whole" chain appears.
This enabled my apple tv to once again respond and get off the "setting time and date" screen.
Hope it works for you.

Keep searching for Carrier

I bought my iphone-3g in new zealand and brough it back to Hong Kong. It's working fine until yesterday - the "connect to iTunes" screen appears. I did that and restored it, then "waiting for activation" message pop out. It keep searching for the carrier and keep restarting itself while connected to iTunes. What happens?!

Hey CaiYC,
Thanks for the question. I understand that you are having issues with your iPhone relating to cellular service. The following resource outlines troubleshooting steps for this issue. If you are unable to loacate the carrier settings, or your issue persists, please contact your carrier as recommended towards the end of the article.
iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
If you're outside the United States, please also follow these steps:
1. Go to Settings > Carrier > Automatic.
If the phone registers any carrier network, Settings > Carrier will be present.
2. If the Carrier option is missing in Settings and you're outside of the Unites States, please contact Apple for support and service options.
Set the option for Automatic to off.
3. A list of potentially available carriers appears after about two minutes. If the device is locked to a carrier, it may connect only to the carrier network to which it is locked. If the device displays carrier networks, then the device is working as expected.
4. Set Settings > Carrier > Automatic back to on.
If you're still experiencing No Service issues, contact your carrier to check for any network or account issues that could cause these symptoms.
Thanks,
Matt M.

Cellular button crash (settings) and keeps searching for connection

When I press the Cellular button in my settings app, the app crashes.
Also no connection with my provider (keeps searching).
The screen seems to glitch a bit too. How can I fix this?
Thanks!

Did the restore fix your problem? I have a 32GB iPhone 5c on Verizon that is doing the EXACT same thing...screen glitches and all.
It will also randomly vibrate like it is notifying me of something but nothing appears on the screen and all the apps are closed.

My iPod Nano Sixth Gen keeps pausing randomly and the screen keeps coming on at random times. It has only started doing this the last 2 days. Tried resetting, unplugging headphones

My iPod Nano 6th Gen keeps pausing. It does this sometimes immediately. Sometimes when the screen goes dark. Sometimes after like 15 minutes.
The screen keeps going off and on at random too.
I tried resetting the settings, resetting with the buttons, searching for additional updates, unplugging the headphone and replugging it TIGHT, and new headphones.
Not only is this annoying, but the power is draining MUCH quicker between the screen coming on and having to turn it on to restart it.

If a restore of the Nano in iTunes to factory settings does not resolve the issue, it's likely hardware related, meaning you should take or send your iPod in for service.
B-rock

Getting values from screen to search help exit

Hi Experts,
I have created a search help in which I am not using selection method but search help exit. Dialog type is 'Dialog with value restriction'. My requirement is to get the values entered in restriction screen into search help exit. Please suggest a parameter which will hold this value in search help exit function module.

Hi M,
As you know there are 5 steps in search help exit. For each step, the values in parameter of your search help exit is different.
For your requirement, you need process in step 'DISP', and get the selection value from 'SHLP-SELOPT'.
Example:
*Build range for customer number
LOOP AT shlp-selopt INTO ls_selopt WHERE shlpfield = 'KUNNR'.
lr_kunnr-sign = ls_selopt-sign.
lr_kunnr-option = ls_selopt-option.
lr_kunnr-low = ls_selopt-low.
lr_kunnr-high = ls_selopt-high.
APPEND lr_kunnr.
CLEAR: lr_kunnr.
ENDLOOP.
Then using the lr_kunnr range in your select statement.
regards,
Archer

I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

Project My Screen keeps Searching...

Similar Messages

Maybe you are looking for