Project name field in WM Transfer order

Hi Guys
I need to print Transfer order print out
Which Table and field I need to take
Project number (Original format) DSA01.000045.00002

Hi,
Can you give me by which transaction code you are taking print of Transfer Order.
I think regarding this you must take a help of yr abper's.
Sandeep

Similar Messages

Project Center - How to Update / Correct the URL/Link stored in the Project Name field.

In the Project Center list, the link in the "Project Name" field for some projects take you the the project details page and some display the project schedule. How can I update/correct the links to display the project schedule?

Reason for this behavior is your enterprise project template which your project manager used for creating project.
We create Enterprise project template, associate PDP , Schedule, workflow according to our need then we use these Enterprise project template for project creation.
In your case some of the project manager must have used basic template( default template) for some project, Custom Enterprise template for some project and f you are using workflow then workflow template for some project, that is why you are able to see
PDP page first for some project and Schedule page for some project.
In order to change it you can change default PDP as schedule for Enterprise project template then open project save and publish them.
kirtesh

Table name and field required for Project name

Hi Guys
I need to print Transfer order print out
Which Table and field I need to take to print Project number (Original format) BSA01.000045.00002

hello,
if i am right in understanding your question, then you wanted to know the technical details about the project number or should i say project id, from which wbs elements are created, on which we finally place the orders.
if this is what you want, then for getting the prject number for a particular order, at the table level, follow the below steps -
using the po number or order number as an input in ekkn table, along with the po line item, you will get the wbs element for the order number for that particular po line item.
and using this wbs element as an input in prps table, you can find the current project number.
finally using this current project number as an input in the table proj, you can find the project id or project number = proj-pspid
so you will require 3 tables to get the required details.
hope this helps you.
Regards,
Zafar.

After changing the field name in BM layer, drilldown field is not in order

We have an organization hierarchy region->branch used in our HBD dashboard report. When we drilldown to branch level report by clicking the region field, the result is OK but branch field is not in order. The branch level order was working fine before we changed this BRANCH field name in BM layer from Team/Branch to Branch.

I have confirmed that I know the user who originally posted this to Metalink. This issue is no longer a problem. Rebooting resulted in the order displaying properly.

How to deactivate field "transmit item to subsystem" in Transfer Order item

Hi all,
I'm trying to send IDoc of Transfer order and I already configured in OMKY and it already worked.
But when I confirm transfer order in T-code: LT12, I have to select field "item to sub-system" and I don't want to do.
How can I deactivate this field or it's not possible. Please advise me.
Thanks and Regards.
Su P.
Edited by: Supaporn R. on Nov 19, 2008 7:26 PM

Hi
Following may resolve your issue
Go to Transaction MASS
Select Object BUS2032      Then execute
select MASSVBAP-PRCTR    Profit Center   then execute
now give your sales order number or numbers with range
and select your required Profit Center   (Which you want to change ) then execute
hope this may solve your issue
Cheers
Shambhu Sarkar

Stock Transfer Order, is there any field called "commit to ship"

Dear Experts,
While doing Stock Transfer Order, is there any field called "commit to ship" which means that the qty is confirmed to transfer from Plant A to B.
Regards

I am not sure exact field are you reffering in PO there is commited qty in delivery schedule tab this will shows commited qty in po once qty confirmed

Aperture library inspector search field searches only project names?

I've been trying to use Aperture 3's Library Inspector search field. It works great if I search for a project name (and I love this feature) but not if I search for part of a master file name (eg "4671"). I was under the impression that a Library Inspector search looks across various fields in the entire library for the search term. Is this a feature? A bug? Is my library corrupted?
(I realize I can search the library by clicking on Photos in the Library Inspector and then using the search field in the browser on the bottom right, but it's too many clicks to be convenient. Maybe it's the only option, though?)

Aperture will search for practically anything you care to think of, but you need to be specific. What you are doing is searching for a Project.
To find a File Name, select a project, look for the little black square and letter Q in it, in the top right of the browser view. This opens a search field. You will see a little label that says Add Rule, click it and there in the list click on Aperture Metadata, then click another couple of times, just for some idea of how powerful Aperture searches are. Allan

How to CREATE an IDOC of name WMTC1D01 for Transfer Orders-STOs??

Hi Experts,
I need to CREATE a IDOC-WMTC1D01 for Stock Transfer Orders-STOs and must execute it.
So, in this regard, request u that, let me know that,
1 - How I can CREATE the IDOC-WMTC1D01 for STOs?
2 - Then, after creating it, How to execute it?
thanq

no reply

Customer's name in stock transfer order

I need to add actual customer's code in stock transfer order so that material can be despatched from depot to only those customer for which that material is transfered to depot. if it is possible, kindly provide me solution. thanks in advance. requirement is on priority basis.

Hi,
You definitely need a customer number in your STO order to do the delivery. Follow the below steps to get the same.
1. Create the concerned depot as a customer.
2. Go to the follwing path and give the customer number created and the sales area to trigger the customer number in your STO. SPRO -> Materials Management -> Purchasing -> Purchasing Order -> Setup stock transport Order -> Define shipping data for plants.
3. Finally, in the above said path go to Assign delivery type and checking rule and give your PO Type, Supplying Plant, Delivery type and the checking rule to complete the STO configurations.
These steps will definitely help you in getting the required customer number.
Regards
Vijay

How to add folder/project name to a File Naming preset

Here's a tip to automatically add the name of the Project or its parent Folder to the filename during Import or Batch Change.
I always used a custom field for adding my client's name to the filename upon Import or Batch Changing versions or masters. But often I would forget to change the custom name, and since it's auto-populated with the previous entry, I'd end up with a bunch of files with the wrong client's name on them. That looks kind of bad. So once I saw with Aperture 3 you can add the Project name or Folder name when relocating referenced files to the new folder structure, I was excited to be able to do the same for the filenames at import. Well, no such luck. They're not an option when you create a custom File Naming preset.
However, I recently decided to poke around inside some plist files, and found a workaround. I discovered the format string for Folder Name is %F and Project Name is %P. The trick is getting the code into the Format Field where you create the preset.
Create a new File Naming preset by choosing "edit" from the Version Name menu during Import or Batch Change. Drag everything you want in the name into the Format field, and enter %F or %P where you want the Folder or Project name. The tricky part is that you can't insert it between two existing criteria. It only works at the very end. After you have it in place, you can drag the criteria around to get it in the order you want.
The alternative method is to insert the code directly into the plist. PLEASE, always make sure you're working with a copy and have a good backup when you're poking around in such things. If you have trouble getting the code to take from within Aperture, you can try this. Same as above, create a new preset, but this time, enter an F or P where you want the Folder or Project name. Give it a unique preset name and save it. Then Quit Aperture. Navigate to ~/Library/Application Support/Aperture/FileNamingPresets.plist, and make a copy of the file, then open with Property List Editor. Dropdown the plist and then dropdown the item you want to edit. You should recognize it by the preset name. Now the easy part. Click in the FormatString field and insert the % character before the F or P you entered in the Format field. Save and you're done.
I discovered later that while the Folder and Project name works just fine during import, for some reason only the Project name works during Batch Change. The Folder name simply creates a "-" in the filename.
In case this is seen as a hack and gets deleted, I'm also submitting it to http://www.macosxhints.com/ and I suspect if anyone from MacCreate sees it, they'll steal it too, as they're known to do.

I do not think there is an out of the box way to do this.
The immediate solution that comes to mind is using a workflow, that runs everytime a document is uploaded/item created, which may be too much for your scenario.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Automatic form generation on creation transfer order for delivery note?

Hi,
I have to create a form that should automatically be generated on the creation of a transfer order for delivery note. How do I trigger this automatic creation of the form? And how can the transfer order number be passed to my print program?
Thx!

hi christophe,
To issue the delivery output, go to transaction VL02N.
Then go to EXTRAS-> OUTPUT->HEADER->EDIT
In the Message output screen enter the relevant output type created for the delivery.
Choose the relevant medium of output.
Choose Simple Mail, in this case the field NAST-NACHA will be having a value of 7.
Specify the Partner Function; in this case it is MA -> Mail partner address
Select the Communication Method for the output type maintained.
This will take you to the SAPOFFICE screen.
Enter there the E-Mail Address to which you want to send the delivery document as PDF.
A mail will be sent to the e-mail address of the E-Mail Address specified, with the delivery output form as a PDF attachment.
hope it will help u ..
*& Report ZZ_TEST                                                     *
REPORT zz_test                                 .
INCLUDE zz_test_top.
INCLUDE zz_test01.
      FORM entry                                                    *
--> RETURN_CODE                                                   *
--> US_SCREEN                                                     *
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen.
CASE retcode.
    WHEN 0.
      return_code = 0.
    WHEN 3.
      return_code = 3.
    WHEN OTHERS.
      return_code = 1.
ENDCASE.
ENDFORM.                    "entry
*& Include           ZZ_TEST_TOP                                      *
TABLES : nast,
           tnapr.
TYPES : BEGIN OF t_SOUDNAMEI1.
        INCLUDE STRUCTURE SOUDNAMEI1.
TYPES : END OF t_SOUDNAMEI1.
Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
*Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
i_lips LIKE lips OCCURS 0 WITH HEADER LINE,
i_SOUDNAMEI1 TYPE STANDARD TABLE OF t_SOUDNAMEI1.
Work Area declarations
DATA:w_objhead TYPE soli_tab,
wa_control_parameters TYPE ssfctrlop,
wa_output_options TYPE ssfcompop,
w_return TYPE ssfcrescl,
w_doc_chng TYPE sodocchgi1,
w_data TYPE sodocchgi1,
w_buffer TYPE string,"To convert from 132 to 255
wa_SOUDNAMEI1 TYPE t_SOUDNAMEI1,
Variables declarations
w_form_name TYPE rs38l_fnam,
w_len_in LIKE sood-objlen,
w_len_out LIKE sood-objlen,
w_len_outn TYPE i,
w_lines_txt TYPE i,
w_lines_bin TYPE i,
retcode      TYPE sy-subrc,
xscreen      TYPE c,
w_spld TYPE usr01-spld,
w_receiver TYPE SOXNA-FULLNAME,
w_OBJ_RECORD TYPE OBJ_RECORD,
w_user type sy-uname,
w_email TYPE ad_smtpadr.
Constants Declaration
CONSTANTS : c_x TYPE c VALUE 'X',
              c_atrate(1) TYPE c VALUE '@'.
*& Include           ZZ_TEST01                                        *
      FORM PROCESSING                                               *
FORM processing USING proc_screen.
SELECT * FROM lips
    INTO TABLE i_lips
    WHERE vbeln = nast-objky.
Call Function module to Getfunction Module name Generated by Smartform
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = tnapr-sform
    IMPORTING
      fm_name            = w_form_name
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc <> 0.
    retcode = sy-subrc.
ENDIF.
CLEAR : wa_control_parameters,
          wa_output_options.
CASE nast-nacha.
    WHEN '1'.
      wa_control_parameters-device    = 'PRINTER'.
    WHEN '7'.
      DATA: l_email TYPE ad_smtpadr.
      wa_output_options-tdnoprev = c_x.
      wa_control_parameters-getotf = c_x.
To get the default output device maintained in the
User profile
     SELECT SINGLE spld FROM usr01
      INTO w_spld
      WHERE bname EQ nast-usnam.
      IF sy-subrc EQ 0.
        MOVE w_spld TO wa_output_options-tddest   .
      ENDIF.
      wa_output_options-tdnoprev = c_x.
      wa_control_parameters-getotf = c_x.
To get the email address maintained for the particular output
      CALL FUNCTION 'NAST_GET_MESSAGE_OBJECT_RECV'
        EXPORTING
          pi_objkey             = nast-tdname
        IMPORTING
          pe_addr               = w_receiver
        CHANGING
          pc_objhandle          = w_obj_record
        EXCEPTIONS
          maildata_not_readable = 1
          OTHERS                = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
       WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      IF w_receiver NA c_atrate.
To retrieve the E-Mail Id in case we get the User name from NAST
        CLEAR wa_soudnamei1.
        REFRESH i_soudnamei1.
        MOVE w_receiver TO wa_soudnamei1-fullname.
To get the user name
        CALL FUNCTION 'SO_NAME_CONVERT_API1'
          EXPORTING
            name            = wa_soudnamei1
          TABLES
            names           = i_soudnamei1
          EXCEPTIONS
            user_not_exist = 1
            parameter_error = 2
            x_error         = 3
            OTHERS          = 4.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        CLEAR wa_soudnamei1.
        READ TABLE i_soudnamei1 INTO wa_soudnamei1 INDEX 1.
        MOVE wa_soudnamei1-sapname TO w_user.
To get the e-mail Id maintained in the user profile
        CALL FUNCTION 'FTR_CORR_CHECK_EMAIL_SAP_USER'
          EXPORTING
            i_user              = w_user
          IMPORTING
            e_email_address     = l_email
          EXCEPTIONS
            mail_address        = 1
            determination_error = 2
            OTHERS              = 3.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        MOVE l_email TO w_receiver.
      ENDIF.
      MOVE w_receiver TO w_email.
ENDCASE.
wa_control_parameters-no_dialog = c_x.
wa_control_parameters-langu     = nast-spras .
wa_output_options-tdteleland    = nast-tland.
wa_output_options-tdtelenum     = nast-telfx .
wa_output_options-tdsenddate    = nast-erdat .
wa_output_options-tdsendtime    = nast-eruhr .
wa_output_options-tddataset     = nast-dsnam .
wa_output_options-tdsuffix1     = nast-dsuf1 .
wa_output_options-tdsuffix2     = nast-dsuf2 .
wa_output_options-tdimmed       = nast-dimme .
wa_output_options-tddelete      = nast-delet .
wa_output_options-tdautority    = nast-tdautority.
wa_output_options-tdcovtitle    = nast-tdcovtitle .
wa_output_options-tdcover       = nast-tdocover .
wa_output_options-tdreceiver    = nast-tdreceiver.
wa_output_options-tddivision    = nast-tddivision.
wa_output_options-tdcopies      = nast-anzal .
wa_output_options-tdnewid       = c_x.
wa_output_options-tdarmod       = nast-tdarmod.
wa_output_options-tdnoarmch     = c_x.
CALL FUNCTION w_form_name
    EXPORTING
     archive_index      = toa_dara
     archive_parameters = arc_params
      control_parameters = wa_control_parameters
      output_options     = wa_output_options
      user_settings      = ' '
    IMPORTING
      job_output_info    = w_return
    TABLES
      it_lips            = i_lips
    EXCEPTIONS
      formatting_error   = 1
      internal_error     = 2
      send_error         = 3
      user_canceled      = 4
      OTHERS             = 5.
IF nast-nacha EQ 7 AND sy-subrc EQ 0.
    i_otf[] = w_return-otfdata[].
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
        max_linewidth         = 132
      IMPORTING
        bin_filesize          = w_len_in
      TABLES
        otf                   = i_otf
        lines                 = i_tline
      EXCEPTIONS
        err_max_linewidth     = 1
        err_format            = 2
        err_conv_not_possible = 3
        OTHERS                = 4.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Convert PDF from 132 to 255.
    LOOP AT i_tline.
Replacing space by ~
      TRANSLATE i_tline USING ' ~'.
      CONCATENATE w_buffer i_tline INTO w_buffer.
    ENDLOOP.
Replacing ~ by space
    TRANSLATE w_buffer USING '~ '.
    DO.
      i_record = w_buffer.
Appending 255 characters as a record
      APPEND i_record.
      SHIFT w_buffer LEFT BY 255 PLACES.
      IF w_buffer IS INITIAL.
        EXIT.
      ENDIF.
    ENDDO.
    REFRESH: i_reclist,
    i_objtxt,
    i_objbin,
    i_objpack.
    CLEAR w_objhead.
Object with PDF.
    i_objbin[] = i_record[].
    DESCRIBE TABLE i_objbin LINES w_lines_bin.
Document information.
    w_doc_chng-obj_name = 'Smartform'.
    w_doc_chng-expiry_dat = sy-datum + 10.
    CONCATENATE 'Delivery' 'Note'
    INTO w_doc_chng-obj_descr.
*w_doc_chng-obj_descr = 'Smart form output'.
    w_doc_chng-sensitivty = 'F'. "Functional object
    w_doc_chng-doc_size = w_lines_txt * 255.
Pack to main body as RAW.
Obj. to be transported not in binary form
    CLEAR i_objpack-transf_bin.
Start line of object header in transport packet
    i_objpack-head_start = 1.
Number of lines of an object header in object packet
    i_objpack-head_num = 0.
Start line of object contents in an object packet
    i_objpack-body_start = 1.
Number of lines of the object contents in an object packet
    i_objpack-body_num = w_lines_txt.
Code for document class
    i_objpack-doc_type = 'RAW'.
    APPEND i_objpack.
Packing as PDF.
    i_objpack-transf_bin = 'X'.
    i_objpack-head_start = 1.
    i_objpack-head_num = 1.
    i_objpack-body_start = 1.
    i_objpack-body_num = w_lines_bin.
    i_objpack-doc_type = 'PDF'.
    i_objpack-obj_name = 'Smartform'.
    CONCATENATE 'Delivery' 'Note' '.pdf'
    INTO i_objpack-obj_descr.
    i_objpack-doc_size = w_lines_bin * 255.
    APPEND i_objpack.
Document information.
    CLEAR i_reclist.
e-mail receivers.
    i_reclist-receiver = w_email.
    i_reclist-express = 'X'.
    i_reclist-rec_type = 'U'. "Internet address
    APPEND i_reclist.
sending mail.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = w_doc_chng
        put_in_outbox              = 'X'
      TABLES
        packing_list               = i_objpack
        object_header              = w_objhead
        contents_bin               = i_objbin
   contents_txt               = i_objtxt
        receivers                  = i_reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDFORM.                    "processing

Can anyone give me user exit name for create/update purchase order partners

Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.

hi,
check these exits.
Transaction Code - ME21N                    Create Purchase Order
Enhancement/ Business Add-in            Description
Enhancement
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
M06B0003                                Number range and document number

Smartform in LT31 Transfer Order Printing

Hi,
I have designed a smartform in LT31 Transfer Order Printing for SU Contents .
I have to inclued in it user exit MWMD0001.
I have an requirement in abap and I need more details on what exactly to modify in the program.
What modifications should I make in exit_rlvsdr40_001?
I need to print fields from tables ltap, ltak, rl03t, and mean.
Your help will be greatly appreciated with required code,if anyone implemented before.
Regards
Manohar S

I worked on same requirement LT31 Transfer Order Pick list. For Form configuration part Functional consultants will do in spro--->Warehouse management.
They assigned a paricular warehouse number to this form. Weather it is multiple / single TO.
Design a smartform and goto se38, give it program name : RLVSDR40.
In this program find user exit 'CALL CUSTOMER '001'.
when ever u double click on this exit. This will take to function module exit. i.e. RLVSDR40 . Here include, we have to call the smartform function module.
let me know , any clarrification required.
Regards,
Vishvesh. K

Table for Transfer Order

Dear Gurus,
I want to check the table name to find the field 'transaction code' for transfer order in SAP WM.
I have already checked the tables LTAK and LTAP but tcode field is not there ..
Thanks & Regards,
Atul Mohod

LTAK and LTAP are to store transactonal data (header and item level) in connection with transfer orders.
Transacton codes are stored in data tables TSTC, TSTCT.
Please specify / explain what do you want exactly. Why are you looking for transaction codes in LTAK / LTAP?

IDOCs creation - Transfer Orders(TOs) for Deliveries - Basic doubts, thanq

Hi Experts,
Am new to IDOCs. I hv a requirement, so, request u that, Can I get some Wht to do tips from u?
My doubts:
1- I hv been asked to create IDOC, Wht does it mean?
2 - How the created IDOC will be get posted?
My requirement is:
Original inbound idoc sent from Gentran will update the delivery with all serial numbers per material for all serialized product. The message code will be the indicator that a Transfer Order-TO, idoc must be created for TO confirmation.
I need to do===>   Should be executed only when the message code on the delivery idoc is u201CTOCu201D. Look up the warehouse code on the delivery header using the delivery nbr in the delivery idoc. Create a new TO confirm idoc per delivery idoc being processed. Create a line item on this idoc for every line on the delivery idoc. Each TO line includes the delivery number and delivery item number so the TO number and line number can be looked up in table LTAP by using the delivery number and line item number found on the delivery idoc. There will be at 2 transfer orders for each delivery item b/c of the 2 step pick process, so select the TO nbr that has 916 as the destination storage type (LTAP-NLTYP). There may be more than 1 pair of TOs per delivery item so this must be completed for each TO found relevant to each delivery item.
The inbound delvry03 idoc will update the delivery with the serial numbers as part of the standard functionality. Since the transfer order must also be confirmed with the quantities on the inbound idoc, an additional idoc must be created from within the delivery update process. The transfer order can be updated and confirmed using the standard idoc and function module which should be created and initiated from the delivery update function module customer exit.
Source = DELVRY03     Destination = WMTCID01
Record Name-Field Name-Record Name-Field Name-Description---Comments
E1EDL20     VBELN-E1LTCOH-LGNUM-Warehouse Number-Look w/ idoc delivery nbr
E1EDL20     VBELN-E1LTCOH-TANUM-Transfer Order Number- Look w/ idoc delivery nbr
E1EDL24     POSNR-E1LTCOI-TAPOS-Transfer Order Line Item- Look w/ idoc delivery line nbr
EVERY THING IS DATA TRIGGERED!!!
thanq
Edited by: Srinivas on Jun 27, 2008 4:41 PM

IDOC Programming
There are two processes in IDOC processing one is INBOUND PROCESS( IDOC coming to the system and its handling at various stages) and the other is OUTBOUND PROCESS( IDOC is send to other system . Separate ABAP programs are written for these 2 processes and different configuration settings are required for each one .Depending upon the trigeering mechanism different programming approaches are used.OUTBOUND PROGRAMS handle the IDOC creation and INBOUND PROGRAMS handle the inbound IDOC and the data trasfer from the IDOC to the database tables.
NEED FOR ABAP PROGRAMMING arises if
1)New IDOC was created
Depending upon the triggering mechanism i.e change pointer,message control
etc the programming technique changes and the type of process.
2)Existing IDOC was extended
User Exits are used to populate data in new segments added and to read them
back.
3)To enhance an exsiting process.
User Exits are used .
Basic structure of an OUTBOUND PROGRAM
The basic structure of all outbound programs is same. The CONTROL
record which is of TYPE EDIDC has to be filled. It contains important fields like
IDOCTP IDOC type
MESTYP Message Type
RCVPRN Recieving Partner (Destination)
RCVPRT Partner Type (it is LS i.e Logical System)
The DATA RECORD internal table which is of TYPE EDIDD has to be filled
in the same order as there are segments in the IDOC definition.
It has 2 important fields which are to be filled ,these are
SEGNAM Name of the segment
SEGDATA Data in the segment and can be upto 1000 bytes.This field
is corresponds to each data segment in the IDOC.
e.g.
DATA INT_EDIDD LIKE EDIDD OCCURS 0 WITH HEADER LINE.
DATA W_SEGDATA LIKE zsegment "custom segment zsegment
INT_EDIDD-SEGNAM = 'ZSEGMENT'
W_SEGDATA-field1 = value "taken from some table
W_SEGDATA-field2 = value "taken from some table
INT_EDIDD-SEGDATA = W_SEGDATA
APPEND INT_EDIDD
This will fill the data record corresponding to the segment ZSEGMENT . For all
segments the sam steps will be repeated until all the data corresponding to all the
segments in the idoc is filled in the internal table of type EDIDD.
There is only one control record and can be multile data records in the idoc
structure.
Which data is to be extracted from the tables to be filled in EDIDD type internal table is determined in standalone programs from the objects which are specified in the selection screen and from the object key passed to the function module in case of message control and is taken from BDCP table in case of change pointers using function modules "CHANGE_POINTERS_READ"
In case of stand alone programs and function modules based on change pointers method the function module "MASTER_IDOC_DISTRIBUTE" is used to send the IDOC to ALE layer for distribution ,in case of message control it is handled automatically by the RSNASTED program invoked by the message control.
OUTBOUND PROCESS AND OUTBOUND PROGRAM.
Outbound programs are used in outbound process to genearte IDOCs . There
purpose is to extract the data from the tables and to fill the IDOC data records
and the control record in the IDOC and pass ito the ALE layer for distribution to the recieving system .
Depending upon the triggering mechanism (how and when the outbound program will be started different techniques and interface is used for outbound program.
1)Message control
Application like PO(purchase order) creation use this technique , where the output type is linked to the application(Message control is a configurable cross application component which can be set in IMG .Such programs are created in the form of function modules and linked to the output type which is linked to the apllication.These have predefined interfaces.
In outbound programs(function module) that use message control the key of the
application document is passed to the function module whcig will read the data from the table depending upon the key passed(NAST structure) and fill the IDOC segemnts with the application data.The control record is also passed to the function module but is not fully filled, the rmaining fields are filled and the control is passed back to the calling program which is RSNASTED and is invoked by the
message control to process ALE and EDI output types and this program on recieving the IDOC data will create the physical IDOC in the system.
The parameteers passed to the function module are
IMPORTING PARAMETERS
OBJECT LIKE NAST
It contains documents key.
CONTROL_RECORD_IN LIKE EDIDC
It contains the partailly filled control record
EXPORETING PARAMETER
OBJECT_TYPE
CONTROL_RECORD_OUT LIKE EDIDC
TABLES
INT_EDID LIKE EDIDD
The internal table used to fill the data records in the same order as they exists in the IDOC.
The important parameters that should be filled in the custom function module are
CONTROL_RECORD_OUT and INT_EDIDD .The OBJK field of the structue NAST contains the key of the apllication document.
2)Stand alone programs
Generally used for Master Data transfer and as such depending upon the requirement can have different interfaces.The programs have a selection screen which has select options to select the objects, and parameters for specifying the recipient Logical System and the Message Type.
Data is selected based on the specified objects from the tables . and control record of type EDIDC is created and filled with important values like DIRECTION ,IDOCTP,RCVPRT,RCVPRN and MESTYP .
Data is filled in an internal table of TYPE EDIDD according to segment definitions
and in same order and the function module MASTER_IDOC_DISTRIBUTE is called passing the control record and the internal table containg IDOC data and importing an internal table consisting of control records for each communication IDOCS created.
3)Change pointer
Change Pointer table is read and checked if changes were made to important fields , if so the outbound program will be triggered automatically , these have predefined interfaces
ALE/IDOC Transaction
SALE Area Menu for ALE configurations.It includes transactions for
Logical System definition and linking it to a client, Transactions for
RFC Destination and Port Definition Etc.
SM59 RFC Destination
Here we specify the login settings for the destination including
the I.P address or Application Server name and the User name and
password.The information entered here is used to run Remote Function
Calls(RFC ) on the destination server .We can create number of types
of RFC Destinations but 3 types are important .
R/3 (R/3 to R/3), LS(logical system) and TCP/IP.
The name of the RFC destination should be same as that of Logical
System as it helps in creation of automatic partner profiles.
WE21 Port Definition.
There are 6 types of ports but only 2 types File and Transactional RFC
types of ports are important.
We have to specify the RFC Destination before a port can be created.
WE57 This is used to assign the Inbound function module to the Message Type
and to the IDOC Type.
WE42 This is used to define the process Code for Inbound Processing.
BD95 Define Filter object type .We can specify the field and the table it belongs
to as a filter object .
BD59 Assignment of Filter object type to the Message Type .Here we create the
link between Filter object and the segment and the message type and the
segment Field.
BD50 Set message Type to reducible.
BD65 Define Mandatory Fields.
BD64 Distribution Model . Also known as Customer Distribution Model Used to
define all the messages that will be exchanged between remote systems
and the name of thes logical systems. Any filters can also be specified.
The model once created has to be distributed on every system which will
be communicating ,It can be maintained on only One system.
BD21 Creating IDOcs from change pointers.
This can be used to create IDOCs from change pointers for a particular
message LIKE MATMAS.
BD22 This can be used to delete change pointers.
BD87 Status Monitor. Idocs can be selected base on number of criteria and there
processing status can be seen in detail.
BD10 Material Master Data Distribution .
Based on Message MATMAS.
BD12 Customer Master Data Distribution .
Based on Message CREMAS.
BD14 Vendor Master Data Distribution
Based on Message DEBMAS .
BDFG Generate ALE Interface for BAPI.
Here we specify the Business Object and the BAPI Function module for
which the interface has to be created.
WE31 Segment Editor.
This is used to create segments. We create the segment type and
segment definition is automatically created by editor e.g. Z1DUMMY is
segment type and Z2DUMMY is the segment definition .We specify the
fields and the data elements these cp\orresponds to create segments.
WE30 IDOC Editor
It is used to create a new IDOC Type or IDOC Extension .We specify the
segments that will be addd to the IDOC type.
WE02/05 IDOC List.
Various selct options and parameters are provided to select IDOCs
depending on the date, direction , mesage type etc.
WE20 Partner Profile
Here we create partner profile for each and every partner from / to which
the messages will be exchanged.There are 6 types of PF generally only
profiles of type LS(Logical System) ,KU(Customer) ,LI(Vendor) is used.
We specify the partner number and partner type and the agent and
the agent type responsible for handling of errors .
For every message send to the partner we have a outbound record and for
evry message coming from the partner we have the inbound record .
We specify the message in the otbound/inbound records ,double
clicking will take us to the detailed screen where the IDOC Type ,Port
and whether the IDCO will be immediatelt processed or collected are
mentioned.

Project name field in WM Transfer order

Similar Messages

Maybe you are looking for