Project not getting closed

Dear Gurus,
The WIP calculation is performed and settled every week for all projects. one particular project is having Negative balance and when we try to close it says its balance is not zero and WIP in Financial Accounting is still to be cleared.
We have tried to Reverse all the Settlement and done RA and try to Settle the Project again but the Balance of the Project 8588.72- has not changed and we were not able to close the project.
Can you please provide your opinion on the same.
Thank you

Hi,
Try reversing all settlements. There might be settlements relevant for a particular period which are settled in some different period.
Trust this helps much.
Cheers!!

Similar Messages

Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

Next time you open the photos application hold down both of the keys suggested and then launch the application in the usual way. If you do this you will be presented with the opportunity to repair your library.

DriverManagerXAConnection is not getting closed.Toplink 9.0.4.5 OC4J 10.1.2

DriverManagerXAConnection is not getting closed.
Toplink is acquiring connections from two pools OracleConnectionPooledDataSource
and XAConnectionpool. The connection of PooledDatasource is getting released
but the DriverManagerXAConnection is not getting released.
The oc4j output shows.
[java] null: Releasing connection com.evermind.sql.DriverManagerXAConnection@d042d7 to pool (Pool size: 1)
[java] null: Releasing connection com.evermind.sql.DriverManagerXAConnection@702936 to pool (Pool size: 2)
[java] null: Releasing connection com.evermind.sql.DriverManagerXAConnection@1c0db6a to pool (Pool size: 3)
I saw a thread in oc4j forum
Get and close connections many times in an EJB transaction drains pool
which says that this issue is resolved, but I am using toplink 9045 and oc4j 1012
and the problem still persist, also I cannot find the bug 3330123 which is
mentioned in that link on metalink.
Does toplink uses two different connection pools for reading and writing respectively
when used with External Transaction Controller ?
If yes then how this two different pools be configured.
Any help is appreciated.

Hello,
In the forum posting you mentioned, bug: 3330123 I think was a red herring as it was an internal bug that was never able to be verified.
The post though mentions that a Tar:3793784.996 was opened. This tar was linked to bug:3674906 which was created to deal with the issue that calling ds.getConnection() max-connections*10 times, OC4J throws SQLException (timeout).
The problem was that each getConnection call was returning a new logical connection, even though they would share the same physical connection if in the same transaction context. This was changed so that there is no limit on the number of logical connections.
The release logging messages you are seeing are a left over that doesn't seem to have been looked at as a probelm in the bug. I believe they can be ignored - the logical connections are held on to by the container transaction and will only released when this transaction is commited/rolledback.
As for pooling configuration, I suggest looking at the sessionbean demos that use OC4J as examples of how it should be configured. TopLink will use separate pools for reading/writing if configured.
Best Regards,
Chris Delahunt

TCP Socket connection in CLOSE_WAIT status and not getting closed

I am facing an issue with the TCP socket connections not getting closed and they are in CLOSE_WAIT status for ever.
As a part of batch process in our application, emails are sent with 4 embedded images. These images are downloaded from 3rd party site with IP say "UUU.XXX.YYY.ZZZ"
The images are embedded to email as follows
1. An URL object is created with the site url.
URL urlPhoto = new
URL("http://UUU.XXX.YYY.ZZZ/email/photos.jpg");
2.     The image cid is created with the URL object and the image name
HtmlEmail htmlEmail = new HtmlEmail();
String cid1 = htmlEmail.embed(urlPhoto,
"photo.jpg");
3.     The image cid is added to the email template by replacing the ${cid1} and the email is sent.
<td valign="top">
               <img src="cid:${cid1}" width="279" height="274">
          </td>
When a mail is sent, 4 new TCP connections are opened and are put in CLOSE_WAIT status for ever. For every mail sent 4 new connections are opened. In UNIX there is an upper limit on the number of open file handles (defaults to 1024) at any point of time. The open TCP connection has the underlying socket in CLOSE_WAIT status and is not getting closed at all. When the upper limit (1024) is reached the batch process is throwing the following exception and terminates.
Caused by: com.inet.tds.ap: java.net.SocketExceptionjava.net.SocketException: Too many open files
at com.inet.tds.am.a(Unknown Source)
at com.inet.tds.TdsDriver.a(Unknown Source)
at com.inet.tds.TdsDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at com.hcomemea.batchprocess.dataaccess.database.BaseJdbcDao.openConnection(BaseJdbcDao.java:106)
... 12 more
When I run the command lsof in UNIX which list the open file handles in the system
$ /usr/sbin/lsof -p 22933 -i | grep CLOSE_WAIT
java 22933 build_master 297u IPv6 129841943 TCP integration.com:47929->UUU.XXX.YYY.ZZZ:http (CLOSE_WAIT)
java 22933 build_master 298u IPv6 129841947 TCP integration.com:47933->UUU.XXX.YYY.ZZZ:http (CLOSE_WAIT)
java 22933 build_master 299u IPv6 129841950 TCP integration.com:47936->UUU.XXX.YYY.ZZZ:http (CLOSE_WAIT)
java 22933 build_master 300u IPv6 129841970 TCP integration.com:47952->UUU.XXX.YYY.ZZZ:http (CLOSE_WAIT)
��list of 935 connections similarly�
I tried 2 solutions
1. Got the HttpURLConnection from the URL object and invoked disconnect method on the same. But it doesn�t work.
2. Ran the batch process java program with the parameter �Dhttp.keepAlive=false to close the underlying connection but didn�t help.
I need the underlying sockets to be closed and not put in CLOSE_WAIT status after sending the mail.
Is it the problem with the embed method of HtmlEmail object not closing the underlying socket connection.
If anyone has faced this issue before, kindly let me know the possible solutions for the same ASAP.
Thank you,
Ramesh G

This sounds more like a problem due to connection pooling at middle tier/application server.
If that has been ruled out, then you might to enable DCD or set expiry time on the server.

Custom screen window not getting closed !

I have designed a screen and calling that using call screen XXXX starting at 15 5. Sreen does load up. Upon clicking close button(X mark) on the top right side, window is not getting closed.
I have two more buttons OK and CANCEL in screen, which I designed, on clicking them screen does behave properly,
I searched in SDN but couldnt get much help.
Any idea what am missing ??
Thanks & Regards
Himayat.

Hi Gautham,
I already have this code in place,
CLEAR v_ok_code.
v_ok_code = sy-ucomm.
CASE v_ok_code.
    WHEN 'CNCL'.
      REFRESH it_input.
      LEAVE TO SCREEN 0.
      WHEN 'TSAVE'.
      PERFORM update_table.
    WHEN OTHERS.
ENDCASE.
The thing is that generally for closing(X mark button on top), we dont do any explicit coding. I see some strange behaviour.

Sales order not getting closed

Hi,
I am creating delivery document through SDK based on existing sales orders. it creates it with perfect quantity, tax , amount and doctotal values but the original sales order does not get closed contradictory to SAP's standard flow.it does shwo all the row-status as closed. but the document status remains open.
what could be wrong? do i have to close it through SDK?
Thanks,
Binita

Binta,
As Petr said, i have added a SO in normal SAP UI without any addon, and copied it to Delivery and changed the Freight and added the delivery, in this case, the SO remains open.
So I guess u can summarize that if any changes occur the SO would remain open?
Hope it helps,
Vasu Natari.

Why SO Header not get closed automatically after all SO lines get closed?

Hi all :
Do you know the reason, why some SO Header still as Booked Status, even All the SO lines are already closed ?
If I see the Workflow status the SO Header is in Status = Deferred and Activity = Wait
And I can close it manually if I rewind the Activity in the Workflow, but I want to know why the SOs not get closed automatically.
Thank you in advance
Edited by: Daniel on Jan 18, 2011 8:41 AM

Have you scheduled the concurrent request to use Workflow Background Processor to Process OEOH ? What is the frequency? Has it run after the lines got closed?
Also, check the value of the WAIT attribute in the OEOH workflow? By default, it is set to close headers at the end of month.
For more detail please see Note:141919.1 on Metalink.
Also refer to metalink document # 397364.1 which details how to change the WAIT attributes.
Hope this helps,
Sandeep Gandhi

Delivery Document not getting closed

Hi Experts,
I am using 2007 B PL 08. I want to close the delivery document through SDK against which no Invoice or return is booked. it gives me error 'Internal error -5002 occured' when I try to close this document with following code.
Dim fd As SAPbobsCOM.Documents
fd = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDeliveryNotes)
         If fd.GetByKey(93) = True Then
                DelClose = fd.Close
                If DelClose <> 0 Then
                    oCompany.GetLastError(FErrCode, FErrMsg)
                    MsgBox(FErrMsg)
                End If
          End If
i even try following code to loop through the lines collection and close lines instead of closing header.
it gives me "you can not close rows in this type of document" error:
Dim fd As SAPbobsCOM.Documents
            fd = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDeliveryNotes)
            If fd.GetByKey(93) = True Then
                For i = 0 To fd.Lines.Count - 1
                    fd.Lines.SetCurrentLine(i)
                    If fd.Lines.LineStatus <> SAPbobsCOM.BoStatus.bost_Close Then
                        fd.Lines.LineStatus = SAPbobsCOM.BoStatus.bost_Close
                    End If
                Next
                DelClose = fd.Update
                If DelClose <> 0 Then
                    oCompany.GetLastError(FErrCode, FErrMsg)
                    MsgBox(FErrMsg)
                End If
            End If
this used to work with 2005 B. Am I doing anything wrong?
Thanks in advance,
Binita

Hi Binita,
Closing the delivery at the header level works in the DI API in SBO 2007A (though it's not good practice as the correct method, as you know, would be to add a return linked to the delivery to return the goods to stock and update the GL). I can also do this via the SBO client (it warns me that there is no target document but I can choose to continue).
If you can close the delivery via the SBO client in 2007B then it sounds like a bug in the DI API.
Kind Regards,
Owen

R12: AP Tax Code window not getting closed

Hi,
When ever I open tax code window in AP(Payables>Setup>Tax>Tax Code) I cant able to close the tax code window, window gets hang, I didnt find any other way to close the window except closing the entire application.
We have recently migrated to 12.0.6 from 11.5.10.2
Please suggest to resolve this issue
Regards
Naga

Have you applied the latest CPCs ? See MOS Doc 557869.1 (EBS: R12 Oracle Financials Critical Patches) - these patches are mandatory. If you have, pl open an SR so Support can troubleshoot. Did this ever work correctly - if so what changes have been made recently ?
HTH
Srini

Process Orders are not getting closed-- Unsettled Variances; Balances exist

Hello Gurus,
We have a problem when we are trying to close process orders in Release 4.6C; We are unable to close those orders and the error messages would be variances are not settled and balances still exist.
When we try to modify the periodic settlement in process order settlement rule it gets grayed out and wont let us do any modifications. Some body suggested that we have to make the settlement rule to FUL and then try to close but it never works. It's a problem for quite sometime, any help would be worth more than an appreciation.
Thanks,
Ramana

Hi Ramana
You need to more specific on the errors and the description of the process where you are finding the problem
Eloborate your problem like what is the settlement type now, whether you have done the variance calculation, what is the status of the order now (TECO, DLV etc.,)
Make the process order in TECO or DLV, calculate the variance calculation and settle the order.
Regards,
Suraj

Project Self Service ( PSS ) - Projects not getting saved

Hi,
We are on EP 7.0 and we have Project Self Service deployed.
We have ECC & Cprojects on two different systems.
We configured
         cProjects: SAP_cProjects
         ERP system: SAP_ECC_cProjects
         J2EE-JCo connections: SAP_cProjects, SAP_cProjects_MetaData
as suggested at
http://help.sap.com/saphelp_erp2005/helpdata/en/42/caa2af6d796bace10000000a1553f6/frameset.htm
Now when that we are saving/editing the project we are getting an error while we are saving it... There is no shortdump at the backend.
The error is as follows
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.setRelatedModelObject(DelegatorRepositoryModelClass.java:668)
    at com.sap.tc.webdynpro.progmodel.repository.IWDViewUsageInfo$Implementation.setComponentUsageInternal(IWDViewUsageInfo.java:413)
    at com.sap.tc.webdynpro.progmodel.repository.IWDViewUsageInfo$Implementation.setComponentUsage(IWDViewUsageInfo.java:698)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.buildNextViewAssembly(FPMComponent.java:299)
    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.buildNextViewAssembly(InternalFPMComponent.java:153)
    ... 48 more
Pls. suggest where could be problem.
Thanks & Regards
Mrutyunjay

Hi Mrutyunjay,
We are have a similar problem to this. Where you able to resolve this issue? Any help would be much appreciated!
Many thanks
Calvin

ME22N: change of PO details in backend not getting replicated with SRM 7.0

Hi All,
We have created Purchase order using shopping cart in SRM 7.0 extended classic scenario. The PO created in SRM 7.0 is replicated into backend in ME21N using a Custom BDC program.
But when the Purchase order is changed in SRM 7.0 the data is not getting replicated. We are not allowed to change the PO details in backend using ME22N (No change in SRM Backend is allowed ), So we are not able to write a Custom BDC program for that. Hence the PO is not getting closed and throwing error.
Please suggest me an alternative.
Regards,
Lakshmi Narayana

Hi,
Being in Extended Classic Scenario, PO cannot be in change mode in R/3.
This is due to check done on PO status (fied STATUS from EKKO table).
When PO is created by SRM replication, its status is 'K' (Purchase Order from BBP). What you could do is to substitute this status with value 'I' (Purchase Order from BAPI) using BAdI BBP_ECS_PO_OUT_BADI.
In this way, R/3 PO can be modified in R/3.
Nevertheless, by doing this, you won't have your SRM PO output after modification(s) (as it is done in standard) because changes are in R/3.
To be able to get an R/3 PO output with ECS, see following note:
883693 - ECS: PO output determination in R/3.
Regards.
Laurent.

ADD ONS WINDOW AND OPTIONS WINDOW DOESNOT GET CLOSED

AFTER WORKING OR ON COMPLETION OF WORK WITH ADD-ON OR OPTIONS, WINDOWS ARE NOT GETTING CLOSED ON CLICKING ON OK BUTTONS

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Projects are seen in workspace but not getting displayed

I have some Web dynpro, JEEE, Dictonary DCs and projects in workspace, but it is not getting displayed when I open NWDS.
I have given the correct workspace path but still the Project explorer is blank
Please help.
(P.S. NWDS was shut down improperly.)

Closing this thread

Could not get metamodel for project

Hallo
Something strange happened...
I developed ein Composited Application under SAP Netweaver 7.1 SP 3.
Today I changed some code and run build.. And I get the error could not get metamodel for project.
And furthmore illegal reference to a non-used resource found.
Any Hints to resolve this problem?
Thanks in advance
Kind Regards!
Ping

Hallo
Thanks for your reply!
The stacktrace I dont' have. Because I had the problem before the build. Thus I cannot have any trace on the server... I don't know where I can find the trace in Devstudio.
I closed all the project and Reopened again. Now I only have the problem as followed: (in the problem tab)
Severity and Description Path Resource Location Creation Time Id
Could not get metamodel for project LocalDevelopmentLocalDevelopmentzukoprototyp(2fdictionarych.post.it.sap LocalDevelopmentLocalDevelopmentzukoprototyp(2fdictionarych.post.it.sap Unknown 1200043648781 35143
But I can build the projekt and redeploy it.
Thanks anyway and have a nice day!
Ping

Project not getting closed

Similar Messages

Maybe you are looking for