Project not opening - help..

One of the projects that I worked on for a WEEK! is not openinhg. Ity just sits in limbo reading forever. Even after an hour it's still not open. What can I do? How do I use the backup project file to open it/ Or is there a way to fix it?
I really cannot throw out a weeks worth of work.
Thanks guys

never mind. i figured it out!!! yeah!
Close FCPX. Then you have delete the "CurrentVersion." Then place the backup project file into the folder where the currentversion was and RENAME it backup to "CurrentVersion" and then reopen FCPX and it should work .
NOTE: You need to move the backup from the backup forlder to the project folder in the exact same spot the CurrentVersion was.

Similar Messages

I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!

I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!

Nobody can help you with at least some system information....
Mylenium

Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Photoshop crashing, Lightroom not opening, help to fix please?

I paid for and downloaded Creative cloud last week, and have installed Photoshop, Lightroom and Bridge. When I went to use these programs I found that Bridge works, Lightroom won't even open, and Photoshop tends to crash after 3-5seconds upon opening. There is no crash report, or any other sort of explanation, and I tried logging off of creative cloud and back on again as the solution options say to do, however this hasn't had any affect on either Lightroom or Photoshop.
Oddly enough, the Camera Raw editor will work, but when I try to open the photo into photoshop, Photoshop again closes, this time asking if I want to save changes to my image. Selecting yes allows me to save the image and then closes, selecting no closes everything.
It's very frustrating.
My computer is an HP Pavillion, I think it's a notebook, but not sure.
I'm running Windows 7 with the following processor: Intel Core i3-2310M CPU 2.10GHz
4gb RAM and a 64bit operating system.
Can someone please help me sort this out? I'd really like to be able to use what I paid for

Hello,
After having contacted Adobe by phone (very professionals) i tried what
they told me to do and everything is fine now.
First i was told to run windows in "minimal" mode", that means without any
service except the microsoft ones by using msconfig.
Then install : "AdobeCreativeCloudCleanerTool"from Adobe; in the dos
windows chose "all", that will delete all previous install of adobe
products.
After that, you'll have to delete every adobe folder you find in this
places :
C:\Programmes\Adobe\
C:\Program Files\Adobe\
C:\Program Files (X86)\Adobe\
C:\Programmes\Common Files\Adobe\
C:\Program Files\Common Files\Adobe\
C:\Program Files (X86)\Common Files\Adobe\
C:\Programmes\Fichiers Communs\Adobe\
C:\Program Files\Fichiers Communs\Adobe\
C:\Program Files (X86)\Fichiers Communs\Adobe\
C:\ProgramData\Adobe\
C:\Utilisateurs\:
Photoshop crashing, Lightroom not opening, help to fix please?
created by maliet90 <https://forums.adobe.com/people/maliet90> in *Photoshop
General Discussion* - View the full discussion
<https://forums.adobe.com/message/6690296#6690296>

Aggregator exe project not opening another project

aggregator exe project not opening another project when published.
The same works fine in HTML.
I tried in Captivate 7 and 8 as well.

I'm having a similar issue. I've used a "home" button to return to the main menu of the course. However, all it does is return me to the last screen I was on. I've tried linking the button to a the aggregator htm and to the swf. Neither gives me the results I want. I currently have it set to open in the current window. However, I get the feeling that it's automatically invoking a bookmarking feature and I'm not getting the pop-up box asking me if I want to return to the last screen or not.

Youtube not opening in Safari browser. However it works with google browser. There is a red arrow coming, with https in you tube, and the page just does not open. help required.

youtube not opening in Safari browser. However it works with google browser. There is a red arrow coming, with https in you tube, and the page just does not open. help required.
It seems I have done some mistake when you tube was open, and i stopped one site to delete!
From then on it is not working.
Any solutions?
GV Joshi

Hi gajanan vasant!
I have a couple of articles for you that should help you troubleshoot your issue with Safari. First, you may want to try a reset on Safari by following the procedure listed in this article:
Safari 5.1 (OS X Lion): Reset Safari
http://support.apple.com/kb/PH5043
If you are still having issues after resetting Safari, you may want to check out this article about third-party add-ons in Safari:
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/TS3230
Thanks for using the Apple Support Communities!
Regards,
Braden

AdobePremiere Project not opening

One of the Project not opening in Adobe premior pro

Lots of more information is going to be needed. What kind of project, what (exact) version number of Premiere is it? What are your system specs? When it doesn't open, what does it do?

I just downloaded Premiere Elements 9 and it will not open Help!

I just downloaded Premiere Elements 9 and it will not open Help!

kmeg55
From where did you download Premiere Elements 9 at this late date? What computer operating system is it to be running on?
Do you have the 9.0.1 Update installed?
Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
Are you getting any display card errors?
We have just gone down this type of road with another 9 user, so let us start with what finally seems to have worked for him.
What video card/graphics card does your computer use? Is the driver for that card up to date according to the web site of the manufacturer of that card? If not, update the card driver. If the driver is up to date already, then delete the BadDrivers.txt file.
For now I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
Local Disk C
Program Data
Adobe
Premiere Elements
9.0
and in the 9.0 Folder is the BadDrivers.txt file that you delete. Make sure that you are working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path shown. After you deleted the BadDrivers.txt and reopened Premiere Elements, the program will generate a new BadDrivers.txt file but now the problem should be gone.
Please review, consider, and then let us know the outcome.
The rationale behind deletion of the BadDrivers.txt file can be found in post 10 of the following thread
Premiere Elements 9 Tryout Serious Display Problem
ATR

Could not open Help File 'Aperture User Manual.PDF'

I downloaded the trial version, while waiting for my boxed version of Aperture to arrive. Once it came in, I entered the serial number and continued using the original application. However, when I try to access the user manual via Help, I get an Alert saying, "Could not open Help File 'Aperture User Manual.PDF'". I manually copied the PDF file from the CD to the documents folder, and then from there to the Applications folder - nothing makes a difference. I even reinstalled - same results. I have tried some of the other items in Help -- if it is for a manual, I get the same Alert.
Any help would be appreciated.
Russ

The files are all there. When I checked their properties, I noticed that the PDF files didn't point to adobe acrobat reader!
Before uninstalling Aperture and then reinstalling it, I tried to reinstall the latest version of Acrobat Reader. Suddenly, I could access the Aperture documents!
I am using a new iMac -- apparently, when I transfered all of my files from my old G5 iMac, Acrobat hadn't properly transfered. Reinstalling Adoe solved the problem!
Thanks for the help!
Russ

Robohelp project not opening

I was working on a Robohelp 8 project and when I clicked Save All, the RH project hanged and became Not Responding. I closed and reopened the Project, and my whole computer hanged along with the project. So I forcefully shut down the computer using the power button. When I tried to reopen the project after putting on my computer, the project is showing the RH starter screen, but is not opening. On the bottom left of the starter screen it is showing Loading Topics and then it hanging there and becoming not responding.
One of my friends suggested deleting the .cpd file and open the project, but that did not help.
Thanks for any solution.

Instead of trying to open your project, try to open a sample.
Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Events and Projects not opening after Restoring from broken Hard drive.

Hi all!
I have a major problem. After almost 3 months editing 6 projects within the same library the hard drive died. These projects are for a very important client and are worth a lot of time and money. We always backup all the raw material on 3 hard drives so we do have all the raw material, however FCPX for some reason had stopped making backups of the projects after it was updated to 10.1.2. (The loss of these projects could mean the downfall of my production company.) We had a professional data recovery company recover all the data to a new hard drive without any problem, we can see the libraries and open them, HOWEVER the events and projects within the libraries DO NOT OPEN OR SHOW UP.
I have entered into the library in the finder and everything seems to be there, all the events files show up. But FCPX wont recognize them.
Any help would be much appreciated,
Thanks, Tom
You can see here that everything is inside the library folder.
But they don't show up in FCPX.
P.S
Also this file is showing up only after the data was restored.

The journal files are something that've been generated by the data recovery. It's completely hosed the data base.
I don't know if this will work. Try carefully removing all the journal files. Put them somewhere else in folders with the location where they came from. Also move out the currentversion.flexolibrary file. Hopefully without the flexolibrary file the application will generate a new one. Then launch the application.
WHy did you continue to operate when there were no backups, without even a hard drive backup?
Wwhat version of the software are you using? 10.1.2?

Projects Not Opening with Multicam and Warp Stabilizer - "[..\..\src\TickTime.cpp-207]"

Editing a sequence with multiple nested multicam clips and warp stabilizer, if I close Premiere and reopen it, it says "Premiere Pro has encountered an error. [..\..\src\TickTime.cpp-207]" repeatedly until killed by Task Manager. I have restarted the computer, cleared the media cache and deleted preferences. I can import the sequence into another project and continue editing but if I close PPro I have to create another project and import the sequence again or I get the same error. Help!

Hi Kevin!
That is great news. I had a feeling the issue would be gone in the Next PPro. The issue can be easily duplicated by following these steps in CS6:
1) User warp stabilizer on several clips (like maybe 6 or more or so).
2) Take two clips and nest them and sync them for multicam on the same timeline as the stabilized clips (NOTE: these two clips don't actually have to be sync'd...just grab any two clips, stack them on top of each other, highlight them both and right-click and choose "nest", then right-click again and "enable" multicam.
3) Save project. Close project. Re-open project and you'll get the error.
If you do that in the NEXT version, does the error come up? Also, just while I have you...if you go into the settings of Warp Stabilizer, what is the default "method"? Is it still defaulted to "Subspace Warp" or did they smarten up and realize the option "Position, Scale, Rotation" is actually MUCH more effeciet causing less wobble and less cropping of the video 90% of the time? Just curious.
Coltom Media Productions,
I feel your pain. What also stinks is that the error pops up again when you export (or I should say when you queue) up the project into AME. I originally thought the number of continues equalled the number of warps applied but that's not always the case. Although, the more warp stabilizers applied the more times you'll have to hit continue. It often goes in numbers divisible by four. Why do I know all this crazy, useless info...hours and hours of trying to "solve" the issue. Every project I do, every single week has more than 100 clips that are stabilized and multiple multicam sequences so I often have to hit "continue" on the error 300-400 times or more on EVERY project. Can't wait til the next version!
To see more on this issue you can see the original post on it here (note that the staff has recently (and graciously) led the charge to help isolate and resolve the issue):
http://forums.adobe.com/thread/956692?start=40&tstart=0
And then also, it definitely made my "Top 15 list" here:
http://forums.adobe.com/thread/1179004
Good luck!!!...oh, one more thing...the project will open...you just have to keep hitting continue. Sucks, but again, hopefully it'll be resolved soon.

My Skype Will Not Open, HELP

Ok, I need help, this problem happend a couple weeks/months ago but I dealt with it up until now, my Skype will not open I only see a Skype Window when I log out, but only a tiny fraction of it, I tried Restore, Maximize, and move but none of these help, I tried looking for other help on here but none matched my problem, if someone can please help me, please do, none of my friends can help me, I have a feeling that my Skype window is somewhere off of my screen, somewhere I can't see it...
Solved!
Go to Solution.

I have Win 7.
The latest Skype version 6.11
when I turn on skype I don't hear that creepy start up sound. sometimes I do. when I try to change my status it won't let me. it just don't do anything.
when I try to call I don't hear the calling sound. no one can see/accept my calls. I can't accept anyone's calls either.
when I try to call someone and try to hang up it won't do it. it just keep calling. no ringing sound at all.
when I try to quit the icon sits on the task bar (it says signed out). alt/crt/del doesn't show that Skype is runing so I can't close it at all. I have to reboot my PC to actually close it.
everything worked fine until last Sun 12/5.
I deleted completely from the PC, unistaled, and instaled. it won't work. not even older versions.
I have a laptop with Win Vista with 6.11 version Skype - and it works perfect.
I have another PC with Win7 (my son's) - with Win7 and 6.11 verson Skype - it works
it works fine on Android Tablet and iPad.
I have done nothing that could do what it did.
Do you think that that latest change of gadgets could harm Skype?
http://windows.microsoft.com/en-us/windows/gadgets
I noticed that since that was lost my problems on THIS computer started. It's really REALLY frustrating!
Please help!
thanks

Aperture will not open- HELP!!!

Can anyone help me? Aperture will not open and I'm worried that I will loose over 35000 photos. When I try to open Aperture this is the message I get:
There was an error opening the database for the library “/Users/philcammarata/Pictures/Aperture Library.aplibrary”.
Does anyone have any suggestions or am I just screwed?
Looking forward to hearing from someone.
Phil

OK good, version 2 on Mountain Lion would be dicey.
Do you have backups of the library? If you don;t now would be a good time to make one.
The first step is to run the Aperture library first aid procedures. Hold down the option (alt) and command keys while starting Aperture. This will open the first aid window. Now select and run Library Repair.
Once it is done post back the results.
Good luck

Project not opening on all cc

Dears,
I am facing an issue where I am not able to open a project on a different computer after it was created on Premiere CC in my computer.
It is saying a message that the project cannot be opened because it was created on a latest version.
I am still facing this issue although I have upgraded the CC version on the system which is not opening the project.
Any idea?
Thanks.

They are all talking of different subjects but all related to the same Arri issue. The first link is the one as mine exactly. But, of course not yet solved.
Have a look of this:
https://forums.adobe.com/thread/1693929?q=long%20time%20saving
and
Lumetri Effect Freezes Premiere Pro Picture
and
Disable automatic color space compression on CinemaDNG files
and
ARRI Amira Masterclip LUT
and
ARRI Group: AMIRA Partner Solutions
Thanks

Project not opening - help..

Similar Messages

Maybe you are looking for