Project not sharing in 10.0.6

Hi all
I have a large project circa 1.5 hours in length - something I have been building for a number of years under lots of versions of iMovie. Post the most recent upgrade I shared to iTunes with no issue. I then tried to shard to theatre and got an error saying you can only do this for movies 15 mins in length. Fine I thought. I have since been trying to share the same movie back to iTunes or anything else for that matter including file. All I get is a warning beep and nothing else. Just does not want to let me share. All I have done since the last update is added a couple of photo's.
Any ideas welcome.
Is anyone aware of any error logs I can look at in iMovie?

If you updated FCPX .0.6 over 0.5, you might be experiencing some weirdness. The best practices from Apple, I believe, was incomplete.
Try deleting preferences first (and I almost never recommend this! http://digitalrebellion.com/prefman) I had to do a complete "fresh" re-install after completely deleting any traces of FCPX. (http://support.apple.com/kb/HT5149)
For your first issue: the Basic Cross Dissolve is in the Effects browser under Dissolves. Just position the playhead either at the cut (up down arrows will position at cut edges) or over a clip (and the transition will be added at the front and back ends) or select several clips in the storyline -- and double click on the cross dissolve transition in the browser to add them. [Getting used to typing Command T is probably marginally easier -- plus, now you can set your choice of default transition by right clicking on any transition in the browser and selecting Make Default from the popup.]
The Add Cross Dissolve is still available with right click ON A GAP... go figure... By all means -- send Apple some feedback!
I am not experiencing your second problem. A basic transition from Basic text to a clip is smooth.

Similar Messages

I have both my iPhone and iPad backing up via iCloud, but they are not sharing the information between devices ie if I purchase an app on one it does not transfer to the other although the backup is successful via iCloud.

I have both my iPhone and iPad backing up via iCloud but the data is not being shared between the devices. When I backup it appears to be working as there are no error messages but the data is not shared between each. Any help would be great as this is very frustrating.

Backing up to icloud is not the same as syncing data between devices. Go to
Settings>Store. Turn on the automatic downloads that you want on that screen.
Settings>iCloud. Turn on the features you want to sync between devices.

HT4314 I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

By "game center account", do you mean Apple ID?
If so, you can change it.
1. Tap settings and navigate to iTunes and App Stores
2. Tap "Apple ID" and then tap "Sign Out"
3. Log in with a different ID.

Family sharing not sharing payment information

Family sharing not sharing payment information
We have two iPhones on iOS 8. Previously my Apple ID was logged into my wife's phone for iTunes and app purchases to share purchases (she's had her own apple is for iCloud all along) . I set up family sharing, on my phone first. I'm the organizer. I invited my wife, switched her Apple ID in settings in iTunes and app purchases to her own Apple ID. Both of us can see we are in the family in iCloud settings. But in the iTunes part it looks like normal, with seperate accounts. If we view purchase in the App Store both accounts are listed (and looks like both accounts show all the same apps that I've purchased previous to setting this up).
Is that right?
More importantly when I go to make an iTunes purchase on my wife's phone, it doesn't try to use any shared payment. It wants to update HER credit card on her account.
My phone says the credit card is shared.
What setting have I missed here?
And I keep seeing this question asked but no clear answer. Will she loose access to any apps or music purchased before the family? They all show under her account now. Apple said somewhere that a legacy account would be allowed. I'm afraid to play too much with it after hearing people are getting locked out for a year.
Thanks for any help!!

Your purchases will be charged against the Organizer's charge card on file, but they will reside under the Apple ID that you are purchasing them under (so if later, you were to leave Family Sharing, they would be "owned" by your Apple ID). If you have a gift card on file for your Apple ID, it will take the funds from the gift card first before going to the Organizer's charge card, but the entire set-up of Family Sharing is one that is designed to charge all purchases against the Organizer's card on file.
How is the set-up invasive, exactly? Family Sharing is primarily designed for families, especially ones with small children. The FAQs and ad pages are very clear about the fact that the Organizer pay for all purchases:
https://www.apple.com/icloud/family-sharing/
Cheers,
GB

All images in Project not showing up

I have 2000 images in a project but for some reason I can only get one subset of them [89 images] to show up. I have checked to show all, I've gone into smart albums and they all show up but only 89 show up when I want to open the entire project...This is true in the maximized viewer and also in list view. I deleted the plist and reopened and it's still happening. I wanted to avoid a full rebuild of the Library [not sure how to rebuild only a project] if possible. I just want to be able to see and work with all my 2000 images in that project, not just the subset. Thanks.

Hello, Victoria
Quote: "I have 2000 images in a project but for some reason I can only get one subset of them [89 images] to show up. I have checked to show all, I've gone into smart albums and they all show up but only 89 show up when I want to open the entire project..."
What firstlaunch said and also did you make any Folders within a Folder? If so the other photos will not show up by design because a Folder within a Folder will force a separation of the images — this is a good thing because sometimes you may not want clients to see what other clients have within projects/jobs.
victor

Printer hp laserjet m1212nf mfp is not shared with the homegroup

Dear friends of HP
I'm using the excellent HP Printer, but everytime Iturn it on, it asks me to make a "SMART INSTALLATION" if not my PC doesn't beguin to print and the default printer stays in grey color in the Control Panel.
I'm using windows 7 Ultimate 64 bits.
I've contact a lot of times to the israeli HP support and they kindly "fix it" by uninstalling and re-installing my printer.
The next time I want to use the printer the same thing happends and asks me to make the Smart Installation.
Today I've got from Windows Troubleshot this error: "Printer HP Laser Jet Professional M1212nf MFP is not shared with the homegroup."
The printer driver installed is: "LJM 1130_M1210_MFP_Full_Solution"
Please help me to fix this troubleshot that is bothering me for more than half an year.
Yours sincerelly: uzi2003

Hi Uzi,
It seems as the HP Smart Install feature is trying to reinstall the printer upon each restart.
Try following this tool by selecting Disable to turn off Smart Install for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-129228-1&cc=us&dlc=en&lc=en...
Next reboot the PC and try printing again, as well check if any prompt appears or not.
If you still experience any printing issues, try following the HP Print and Scan Doctor below and check again:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-136595-1&cc=us&dlc=en&lc=en...
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet 6600 is not shared with the Homegroup

HP Officejet 6600 does not print from computer. Will print wireless from another device. Error message is
"HP Officejet 6600 is not shared with the Homegroup". It also give a error message on the screen that there is a problem with the device on the USB port. Have re-installed the driver several times. HELP

Hello Tonicc,
Welcome to the HP Forums.
I see that you are having an issue with sharing the printer.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Purchase Orders_ Multiple projects not permitted on a single purchase order

Hi Guru
Please assist:
We are using the MM & PS for Purchase Requisition, the Account Assignment N and the buyers created PO with different Network numbers on one Purchase Order,
I want to delete the purchase order and i am getting the message Multiple projects not permitted on a single purchase order
How do i delete this PO, i have tried the delivery complete and final invoice tick its not working
Regards
Susan

The Apple Configurator tool robbed my school of @ 60×4 apps.
Here's my mistake. I bought all the apps needed for the whole school in one lump sum. i.e. 350 copies of Pages. Then happily went to Configurator and loaded the spreadsheet. Installed on all the student iPads. Then need the remaining licenses to gift to the teachers and @ 30 for the cart. NOPE! Once they are loaded in to Configurator you can never get them back. Apple said, “sorry”.
I did this for the iWorks suite, iPhoto, & neu.Annotate before I realized what was happening.
This is what to do, in short. From the VPP account, buy the number needed for exactly what you need, just make sure, it's over 20, even if you only need 11, 20 copies is cheaper than 11 because they are half off at 20 or more. Get the spreadsheet generated by the VPP site for the 20 then buy for the next cart or site, it will generate a new spreadsheet of 20 you can give to the computer and its copy of Configurator.
https://schoolipads.wordpress.com/2013/03/23/vpp-configurator-multiple-carts-or- locations/

My iPad 2 won't receive text messages and is not sharing any data with my iPhone 4. Please help!

My iPad 2 won't receive text messages and is not sharing any data with my iPhone 4. Please help!

The iPad receives Text Messages through Apple's iMessage feature. Make sure this is turned on on your phone. Also, text messages received at your phone number are not shared with the iPad. Make sure that iMessage texts are being sent to your EMAIL ADDRESS

Can/ how do I link two or more "projects" - not events or clips - "projects" together in final cut pro 10?

Can/ how do I link two or more "projects" - not events or clips - "projects" together in final cut pro 10?

Thanks Tom -
I created two "sequences". They are currently listed individually in the "project library". Now I want to take sequence "B" and attatch it in it's entirety to the end of sequence "A" - forming one long sequence.
I have tried to drag sequence "B" and drop it into "A's" timeline. I have tried to creat a compound clip. I'm either missing something - or - you can create a compound "clip" or a compound "event" - but perhaps you cannot link to "projects" together.
Does this help descibe my problem?
Thanks again.

How do i get the "part of project not played" error to stop?

My garageband app lately has been absolutely awful and everytime i do any recording will not let me play it back if im playing multiple tracks over eachother. In one project I have there is only one real acoustic track and when trying to record over it I am not able because a message is constantly popping up saying that the project can't be played because it has too many tracks, effects, or notes. I don't understand how this can be the case as I only have two tracks, no effects and minimal notes so there doesn't seem to be any reason why the project shouldn't be able to be played or recorded in real-time. Any help/suggestions are greatly appreciated.

In addition to Edgar's explanation -
is your profile signature "GarageBand (Mac) '11, OS X Mountain Lion (10.8.5)" still current? Just in case you already upgraded to OS X Mavericks, make sure you updated to the latest version 10.9.2. The 10.9.1 version had problems with the memory management, that have been fixed in the new update.
You can check, how much memory is used by your applications from the "Activity Monitor" utility. You will find it in the "Utilities" folder in the "Applications" folder. Launch it and click the "Memory" tab, to see which applications are competing with GarageBand for the memory and should better be closed.
To free as much memory as possible at once, restart the computer, if you are continually seeing "Part of project not played".

PSIDE.EXE : project not found error.

Hi All,
Is there any restriction on the length of the project name? When I run PSIDE.EXE to copy ABCD_ML_TICKET_INC000001299217 to PROD from UAT it fails with error: project not found at source. But when I do check with AppDesigner I can see the project.
And it was successfully copied from DEV to SIT to UAT.
Regards,
Elvis

Failed one : (UAT to PROD)
D:\PTools\PS_Normal_84803\bin\client\winx86\PSIDE.EXE -HIDE -CT ORACLE -CD AZHO -CO PS1 -CP #!#*****#!# -PJC ABCD_GL_TICKET_INC000001299217 -TD PZHO -TO PS1 -TP #!#*****#!# -LF d:/PTools/PS_Normal_84803/CR_195719_PZHO_1_LOG.LOG
OK one : (SIT to UAT) :
D:\PTools\PS_Normal_84803\bin\client\winx86\PSIDE.EXE -HIDE -CT ORACLE -CD izho -CO PS1 -CP ****** -PJC ABCD_GL_TICKET_INC000001299217 -TD AZHO -TO PS1 -TP ***** -LF d:/PTools/PS_Normal_84803/CR_193214_AZHO_trail20090217_LOG.LOG
SIT, UAT, PROD are on same version (tools, apps, db)
As it is obvious, we are using PSIDE.EXE to execute.
Elvis

Project Notes in Logic 9

Hello, this is hopefully just a quick one.
I've noticed recently that the default formatting of my project notes in Logic 9 has gone a bit weird.
If I write a long sentence the words go off the edge of the page and I have to scroll across to view them. Is there any way to 'wrap' the text so that everything fits on the space to view?
Ben

Any advice on this, folks?

Specific need: to generate a cylindrical projection NOT from a sphere, but from a flat image

Specific need: to generate a cylindrical projection NOT from a sphere, but from a flat image, like a person's face, etc., such that the cylindrical projection can be used to wrap a sphere (via other software such as the DX I use), where the face could be positioned arbitrarily at the equator (where a cylindrical projection image created FROM a sphere appears most normal), a pole (where a cylindrical projection image created FROM a sphere appears most stretched out), or anywhere else on the resultant sphere's surface. This would allow creation of a, say, a cylindrical projection of a sphere that represents a numbered billiard ball from a flat representation of the number design. Is there an Adobe or Photoshop product that will provide this? Thanks for any help!

Thanks, Noel. Here's the crux: the image sphincters at the poles, natch. I've been looking for an algorithm or feature in a graphics app that would assume that the flat image of joetalker's entry would be spread proportionately at the poles so that the size of print would be uniform (or the shape of face photo, etc).
Using such a feature would dictate that type, lets say, would be distributed on the flat image something like this in order not to lose too much at the edges (where the sphere mesh meets at 0-longitude), and sphincters as latitude approaches the poles:
++++++++Hello+++++++++
+++++How are you &+++++
++What can I do for you+++
+++++How are you &+++++
++++++++Hello+++++++++
Yes, over-simplified. Here with a photo, where the original photo is "X" signs, and the empty space is "+" signs, along with the desired created cylindrical projection ready for a sphere mesh:
Example 1 at equator:
original:
++++++++++++++++++++++++
++++++++++++++++++++++++
++++++++++XXXXX++++++++++
+++++++++XXXXX++++++++++
+++++++++++XXXX+++++++++
++++++++++XXX++++++++++
+++++++++++++++++++++++++
++++++++++++++++++++++++
created cylindrcal projection:
++++++++++++++++++++++++
++++++++++++++++++++++++
++++++++XXXXXXXXX++++++++
+++++++++XXXXX++++++++++
+++++++++XXXXXXXX+++++++
+++++++XXXXXXXXX+++++++
+++++++++++++++++++++++++
+++++++++++++++++++++++
-very similar, with a widening at top and bottom of "photo", right?
Example 2 at poles:
original:
+++++++++++XXXX+++++++++ (bottom of photo)
++++++++++XXX++++++++++
+++++++++++++++++++++++++
+++++++++++++++++++++++++
++++++++++++++++++++++++
++++++++++++++++++++++++
++++++++++XXXXX++++++++++ (top of photo)
+++++++++XXXXX++++++++++
created cylindrcal projection:
+++XXXXXXXXXXXXXXXXXXXX+++
++++++XXXXXXXXXXXXX++++++
+++++++++++++++++++++++++
+++++++++++++++++++++++++
++++++++++++++++++++++++
++++++++++++++++++++++++
+++++XXXXXXXXXXXXXXX++++++
++XXXXXXXXXXXXXXXXXXXXXX+++
-now with an even more widening toward the poles to compensate for the pole sphinctering.
If starting with a true globe already spatially correct, creating a cylindrical projection is commonplace. I'm attempting to find an app that will create a cylindrical projection-like graphic ready for a sphere mesh from a flat photo or graphic. The above example would place the photo in correct proportion over the pole of the sphere, discarding information at the ever decreasing edges as the image projects to the poles.
Hope this is clear, and thanks again!
-Johnny

Adobe Connect: how to display a picture in the WebCam pod when not sharing video

Adobe Connect: how to display a picture in the WebCam pod when not sharing video

The WebCam pod can pause a live video showing a static image. However, I believe that you are looking to use a Share pod, where you can upload a JPG or PNG image. Just place the share pod with the image where you would have the Camera pod.

Project not sharing in 10.0.6

Similar Messages

Maybe you are looking for