Project not showing when pulling BP account balance

Hi experts
When my client pulls the account balance report off the BP master data, it sometimes doesn't show which project the relative document was assigned to. If I go into tue document, be it an invoice or journal, it has been assigned a project but on the account balance window, sometimes it doesn't reflect the project. This isn't all the time, but most times.
I have checked that the client isn't adding the project onto the document after the document has been added. I'm not sure why this could be?
Any input would be appreciated....

Hi Bradley,
The project will only show for those lines where the underlying journal has the project in the relevant line. For instance by default if you add an invoice with a project selected, the journal will only reflect this project in the line of the revenue account but not the line of the BP. Therefore if you look at the account balance of the BP, there will be no project - if you look at the account balance of the revenue account, the project will be populated.
In your case I guess the journals which were manually added show the project in the BP account balance but invoices don't - since for the manual journals in the BP line the projects are defined by the users, but not in the case of invoices.
I hope it helps.
Regards,
Nat

Similar Messages

System preferences default icons set not showing when modifying user account icon

Hi!
I was willing to change my account icon and went into system preferences, accounts and groups, open my account and clicked on the icon in order to change it.
To my surprise there was no default icons showing.
All the icons are in their place in System/Lybrary/User Pictures/ but it seems there is not any info connecting them to the default icon set when modifying the accounts icon. The problem is on all the accounts.
I updated the system to 10.8.2 and the problem is still there.
I already did the permission verification and the only one which is alwasy appearing (even after repair) is someone related to "ruby".
I can give more details if needed.
Thank you everybody for your help.

Thanks Bernard,
It works fine with JInitiator but not working with
the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
Thx and Regards
dkklau

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97456)

I'm getting message that amount withdrawn successfully but it's not showing in my bank account

I'm from India and due to some restrictions paypal amount automatically withdraw to the bank account. I'm getting message that amount is successfully withdrawn but it's not showing in my bank account how many days it will take to appear in bank account?

How do I now put it on another computer? I only have the license/reg number that is on the software. I'd appreciate whatever help anyone has to give!
You can still download the Aperture 3.1 Trial installer to reinstall Aperture from this webpage - there is a link to the trial and instructions on how to reinstall - don't let the title of this page distract you :
Aperture 3.4: May quit unexpectedly on launch after updating
The Aperture 3 serial number will be available in the about panel, when you are running Aperture on your old mac (from the main menu bar: Aperture > About Aperture).
Regards
Léonie

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN

My external hard drive does not show when I am trying to open a document in Office Org??

My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

Does the drive show up under 'Devices' in Finder?

Preview icon not showing when in thumbnail. (Sketchu

Hello,
I recently updated my MBP to Yosemite and installed sketchup on it.
The preview icon of my sketchup files are not showing when in thumbnail. But as i increase the size of the icon from thumbnail in viewoption i.e from 64px x 64px to 124px x 124px it shows. So my icon is shown as blank without any app logo. Also when i change my view from thumbnail to coverflow or something it shows. Otherthan thumbnail everything works.
So where is the error in it?
Please help...
Thanks
Amar

Try the standard fixes:
- Rest. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. - Restore from backup
- Restore to factory defaults/new iPod.

My Ipad Air is not showing in my itunes account, even though I have gone threw all of the steps and my data has downloaded to my device

My Ipad Air is not showing in my itunes account, after I have gone through all the steps and download all my information from my previous ipad

Did you enable the Side Bar?
Select "Show Side Bar" from the "View" menu of iTunes.

Battery icon dose not showing when i plug in to usb or power

battery icon dose not showing when i plug in to usb or power? and not charging when phone is on

I would try another cable or try the cable in another ios device
to verify if the cable was broken or your iphones connector is

I just redeembed my gift card but the money is not showing up in my account. What can I do?

I just redeembed my gift card but the money is not showing up in my account. What can I do?

Not sure if you have tried the following...
http://support.apple.com/kb/TS1538
This article has some good troubleshooting ideas.

Date not showed when report is viewed in PDF .

Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.

I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now.

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working. The only way I can fix it is by shutting down the phone. It will work for a while, then it won't.

Help: Records not showing when cube is placed under the Multiporivider

Hi Experts,
I have a Cube called Bcube with char Plant,calm year/month, material and Key Figure, Pqty
When I generate a report on this Cube, everything looks fine and I see plants, year, etc in the report
There are 2 other cubes:
MCube also has char Plant,calyear/month, material and Key Figure: Pqty, Sqty, TQty, AQty
DCube also has same as BCube: with char Plant,calyear/month, material and Key Figure Pqty
When I place all three cubes under the multiprovider, the values from the BCube does not show up in reports
e.g. in a simple report such as
Row : Plant
Columns: Pqty, Sqty, TQty, AQty
In the Multiprovider, under the Indentification of Characteristics, I checked the boxes for all three cubes whenever the same charactertic in all cubes showed up for identification: e.g..
InfoProvider InfoObject
Bcube----
Plant
MCube-------Plant
DCube -
Plant
and same for. e.g. 0Calyear
and same for Key Figures, e.g. I checked all 3 boxes for PQty which exists in each of the cubes
1. Why is my data for BCube not showing when reporting against the multiprovider?
2. what does it mean by checking the 3 boxes for Plant? and checking the 3 boxes for 0Calyear.
Thanks

Hi,
regarding your questions:
1. When I run listcube against the multiprovider, I only went to the output list to select the fields I needed in the output; then entered the particular cube e.g. BCube in the infoprovider field. That was it (NO other selection) and I got the described results I explained earlier. If you have a specific test for me to try, please let me know.
2. Please find the settings in both characteristics and key figures for all cubes in the MULTIPROVIDER maintenance screen:
Characteristic Assighment:
0calyear -- 3 boxes checked for BCube, DCube & MCube
Plant -- 3 boxes checked for BCube, DCube & MCube
0Material-- 3 boxes checked for BCube, DCube & MCube
Key Figure selection
PQty-- 3 boxes checked for BCube, DCube & MCube
Sqty --checked for DCube, this key fig is ONLY in DCube
TQty--checked for DCube, this key fig is ONLY in DCube
AQty--checked for DCube, this key fig is ONLY in DCube
I hope this helps you to guide me.
Or, were you referring to mappings in the transformations?
Thanks

I have registered with and validated click and buy but it is not showing on my itunes account

I have registered with and validated click and buy but it is not showing on my itunes account???

In iTunes these should theoretically be available on the iTunes Store home page.
On the right of that page under Quick Links find Purchased section (if available for your country) and then choose the TV Show category and choose to download there - it doesn't happen automatically.
If not in US you won't be able to redownload movies (yet anyway).
If a title is not available there are reasons for this but you'd expect it to be if you've only just bought it.
Actually I prefer buying in iTunes - I bought some TV episodes on AppleTV but cannot complete my season in iTunes - maybe i can't for that show (support were useless) but I do wonder if it's because the purchase was made on ATV.
AC

CS6 does not show on my Adobe account. Has my registration been lost?

CS6 does not show on my Adobe account. Has my registration been lost?

make sure you're using the same adobe id to check your account as the adobe id used to register your software. also, you should have a copy of your serial number(s) secured locally. and, for extra comfort, you should have a copy of your installation files,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Project not showing when pulling BP account balance

Similar Messages

Maybe you are looking for