Project Notes in Logic 9

Hello, this is hopefully just a quick one.
I've noticed recently that the default formatting of my project notes in Logic 9 has gone a bit weird.
If I write a long sentence the words go off the edge of the page and I have to scroll across to view them. Is there any way to 'wrap' the text so that everything fits on the space to view?
Ben

Any advice on this, folks?

Similar Messages

Latency Between Outputs After Project Conversion From Logic Pro 9

hiya!
i am experiencing a bizarre kind of latency – between outputs. for example, audio assigned to stereo outs 13-14 will leave my system 120 or so ticks after audio assigned to mono outputs 3 or 4. sometimes mono outputs are out of sync with one another too. there's no apparent rhyme or reason, and the latency itself seems to shift – even with plugins turned off and removed from the channel strips. if i have an aux that's outputting to channels 7-8 and do a send to an aux that outs to 13-14, this audio should be perfectly aligned, but it just isn't.
i experience this problem in sessions converted from logic 9 to logic x, though sometimes it seems to happen within sessions started in logic x. i can't for the life of me figure out why it's happening, but do believe there's some sort of error being introduced in the conversion. i can't find anything anywhere on the internet about it.
one temp fix i found was to insert an I/O plugin into the problematic aux, turn it on with an out assigned, then turn it off. sometimes that's worked, and sometimes it hasn't. i've been able to use delay compensation on certain tracks, but it's not an exact science, and sometimes the compensations themselves need to change in order for the tracks to sound aligned. it's beyond aggravating. in some situations, i've had to re-record entire sessions. not tight!
to be clear, this is not about monitoring latency, or having to slide tracks into alignment after recording, or the waveforms on the screen not matching up with what i'm hearing. this is not about plug-in latency. the situation i'm describing happens when plugins are entirely removed: audio that is supposed to be leaving logic at the same exact time via different outputs is somehow not aligned.
my signal chain:
logic pro x.0.7
mac pro quad core (trash can) into -->
apogee symphony 16x16 -->
neve 5059 16x2x2 -->
api 2500 -->
back into the symphony
i've been assured by both apogee and neve and sweetwater that this is not their issue--it's logic pro x. i'm inclined to agree, since it seems to be happening before the audio leaves logic.
please help! many thanks for anything!

godmodeinternet wrote:
thanks for your reply!
to answer some of your answers:
-i have all my channels go through auxes, in all projects, but i did attempt to route audio straight off the channels and encountered the same situation i described above.
-plug-in latency is likely set to ALL at all times, since i often track while in the 'mixing stage'. this is how i've always done everything.
ugh. the worst!
do you think there's anything in environment i might be able to swap around that might have gotten screwed up in the conversion?
thanks again.
I don't think it's an Environment issue, however, quite a few people have reported some corruption when importing Logic 9 projects, it usually takes the form of random Inspector Settings for Delay/Velocity and Preferences/Audio - Recording Delay being set to something other than 0 <zero>. This doesn't sound like your problem. Also sounds like your Plugin Latency setting (ALL) isn't the problem.. although if you're recording while mixing it should be set to Audio & Software instruments.
Have you used your hardware system successfully on an earlier version of OSX and Logic 9? If so then the answer is apparent, especially so if you notice it on projects started in Logic-X (current system) although it my take a certain level of project complexity before it shows up.

All images in Project not showing up

I have 2000 images in a project but for some reason I can only get one subset of them [89 images] to show up. I have checked to show all, I've gone into smart albums and they all show up but only 89 show up when I want to open the entire project...This is true in the maximized viewer and also in list view. I deleted the plist and reopened and it's still happening. I wanted to avoid a full rebuild of the Library [not sure how to rebuild only a project] if possible. I just want to be able to see and work with all my 2000 images in that project, not just the subset. Thanks.

Hello, Victoria
Quote: "I have 2000 images in a project but for some reason I can only get one subset of them [89 images] to show up. I have checked to show all, I've gone into smart albums and they all show up but only 89 show up when I want to open the entire project..."
What firstlaunch said and also did you make any Folders within a Folder? If so the other photos will not show up by design because a Folder within a Folder will force a separation of the images — this is a good thing because sometimes you may not want clients to see what other clients have within projects/jobs.
victor

This is not the logical system of controlling area 2000

Hi,
While creating Activity type / price planning in kp26....i am getting the the information like...
"This is not the logical system of controlling area 2000"..
but i am using the company code 3000 which is assigned to the controlling area 2000....
so...kindly tell me how to come out of this....
Thanks in advance..

Hi,
I assume the error is either KC028 or COCORE081. In any case: please check if you have activated an ALE scenario for the relevant controlling area in TA OKKP1. Then check if the logical system differs from the system defined for you client in TA SCC4. If this is the case, then that is the reason for the error.
Regards
Karl

Purchase Orders_ Multiple projects not permitted on a single purchase order

Hi Guru
Please assist:
We are using the MM & PS for Purchase Requisition, the Account Assignment N and the buyers created PO with different Network numbers on one Purchase Order,
I want to delete the purchase order and i am getting the message Multiple projects not permitted on a single purchase order
How do i delete this PO, i have tried the delivery complete and final invoice tick its not working
Regards
Susan

The Apple Configurator tool robbed my school of @ 60×4 apps.
Here's my mistake. I bought all the apps needed for the whole school in one lump sum. i.e. 350 copies of Pages. Then happily went to Configurator and loaded the spreadsheet. Installed on all the student iPads. Then need the remaining licenses to gift to the teachers and @ 30 for the cart. NOPE! Once they are loaded in to Configurator you can never get them back. Apple said, “sorry”.
I did this for the iWorks suite, iPhoto, & neu.Annotate before I realized what was happening.
This is what to do, in short. From the VPP account, buy the number needed for exactly what you need, just make sure, it's over 20, even if you only need 11, 20 copies is cheaper than 11 because they are half off at 20 or more. Get the spreadsheet generated by the VPP site for the 20 then buy for the next cart or site, it will generate a new spreadsheet of 20 you can give to the computer and its copy of Configurator.
https://schoolipads.wordpress.com/2013/03/23/vpp-configurator-multiple-carts-or- locations/

Can/ how do I link two or more "projects" - not events or clips - "projects" together in final cut pro 10?

Can/ how do I link two or more "projects" - not events or clips - "projects" together in final cut pro 10?

Thanks Tom -
I created two "sequences". They are currently listed individually in the "project library". Now I want to take sequence "B" and attatch it in it's entirety to the end of sequence "A" - forming one long sequence.
I have tried to drag sequence "B" and drop it into "A's" timeline. I have tried to creat a compound clip. I'm either missing something - or - you can create a compound "clip" or a compound "event" - but perhaps you cannot link to "projects" together.
Does this help descibe my problem?
Thanks again.

How do i get the "part of project not played" error to stop?

My garageband app lately has been absolutely awful and everytime i do any recording will not let me play it back if im playing multiple tracks over eachother. In one project I have there is only one real acoustic track and when trying to record over it I am not able because a message is constantly popping up saying that the project can't be played because it has too many tracks, effects, or notes. I don't understand how this can be the case as I only have two tracks, no effects and minimal notes so there doesn't seem to be any reason why the project shouldn't be able to be played or recorded in real-time. Any help/suggestions are greatly appreciated.

In addition to Edgar's explanation -
is your profile signature "GarageBand (Mac) '11, OS X Mountain Lion (10.8.5)" still current? Just in case you already upgraded to OS X Mavericks, make sure you updated to the latest version 10.9.2. The 10.9.1 version had problems with the memory management, that have been fixed in the new update.
You can check, how much memory is used by your applications from the "Activity Monitor" utility. You will find it in the "Utilities" folder in the "Applications" folder. Launch it and click the "Memory" tab, to see which applications are competing with GarageBand for the memory and should better be closed.
To free as much memory as possible at once, restart the computer, if you are continually seeing "Part of project not played".

PSIDE.EXE : project not found error.

Hi All,
Is there any restriction on the length of the project name? When I run PSIDE.EXE to copy ABCD_ML_TICKET_INC000001299217 to PROD from UAT it fails with error: project not found at source. But when I do check with AppDesigner I can see the project.
And it was successfully copied from DEV to SIT to UAT.
Regards,
Elvis

Failed one : (UAT to PROD)
D:\PTools\PS_Normal_84803\bin\client\winx86\PSIDE.EXE -HIDE -CT ORACLE -CD AZHO -CO PS1 -CP #!#*****#!# -PJC ABCD_GL_TICKET_INC000001299217 -TD PZHO -TO PS1 -TP #!#*****#!# -LF d:/PTools/PS_Normal_84803/CR_195719_PZHO_1_LOG.LOG
OK one : (SIT to UAT) :
D:\PTools\PS_Normal_84803\bin\client\winx86\PSIDE.EXE -HIDE -CT ORACLE -CD izho -CO PS1 -CP ****** -PJC ABCD_GL_TICKET_INC000001299217 -TD AZHO -TO PS1 -TP ***** -LF d:/PTools/PS_Normal_84803/CR_193214_AZHO_trail20090217_LOG.LOG
SIT, UAT, PROD are on same version (tools, apps, db)
As it is obvious, we are using PSIDE.EXE to execute.
Elvis

Specific need: to generate a cylindrical projection NOT from a sphere, but from a flat image

Specific need: to generate a cylindrical projection NOT from a sphere, but from a flat image, like a person's face, etc., such that the cylindrical projection can be used to wrap a sphere (via other software such as the DX I use), where the face could be positioned arbitrarily at the equator (where a cylindrical projection image created FROM a sphere appears most normal), a pole (where a cylindrical projection image created FROM a sphere appears most stretched out), or anywhere else on the resultant sphere's surface. This would allow creation of a, say, a cylindrical projection of a sphere that represents a numbered billiard ball from a flat representation of the number design. Is there an Adobe or Photoshop product that will provide this? Thanks for any help!

Thanks, Noel. Here's the crux: the image sphincters at the poles, natch. I've been looking for an algorithm or feature in a graphics app that would assume that the flat image of joetalker's entry would be spread proportionately at the poles so that the size of print would be uniform (or the shape of face photo, etc).
Using such a feature would dictate that type, lets say, would be distributed on the flat image something like this in order not to lose too much at the edges (where the sphere mesh meets at 0-longitude), and sphincters as latitude approaches the poles:
++++++++Hello+++++++++
+++++How are you &+++++
++What can I do for you+++
+++++How are you &+++++
++++++++Hello+++++++++
Yes, over-simplified. Here with a photo, where the original photo is "X" signs, and the empty space is "+" signs, along with the desired created cylindrical projection ready for a sphere mesh:
Example 1 at equator:
original:
++++++++++++++++++++++++
++++++++++++++++++++++++
++++++++++XXXXX++++++++++
+++++++++XXXXX++++++++++
+++++++++++XXXX+++++++++
++++++++++XXX++++++++++
+++++++++++++++++++++++++
++++++++++++++++++++++++
created cylindrcal projection:
++++++++++++++++++++++++
++++++++++++++++++++++++
++++++++XXXXXXXXX++++++++
+++++++++XXXXX++++++++++
+++++++++XXXXXXXX+++++++
+++++++XXXXXXXXX+++++++
+++++++++++++++++++++++++
+++++++++++++++++++++++
-very similar, with a widening at top and bottom of "photo", right?
Example 2 at poles:
original:
+++++++++++XXXX+++++++++ (bottom of photo)
++++++++++XXX++++++++++
+++++++++++++++++++++++++
+++++++++++++++++++++++++
++++++++++++++++++++++++
++++++++++++++++++++++++
++++++++++XXXXX++++++++++ (top of photo)
+++++++++XXXXX++++++++++
created cylindrcal projection:
+++XXXXXXXXXXXXXXXXXXXX+++
++++++XXXXXXXXXXXXX++++++
+++++++++++++++++++++++++
+++++++++++++++++++++++++
++++++++++++++++++++++++
++++++++++++++++++++++++
+++++XXXXXXXXXXXXXXX++++++
++XXXXXXXXXXXXXXXXXXXXXX+++
-now with an even more widening toward the poles to compensate for the pole sphinctering.
If starting with a true globe already spatially correct, creating a cylindrical projection is commonplace. I'm attempting to find an app that will create a cylindrical projection-like graphic ready for a sphere mesh from a flat photo or graphic. The above example would place the photo in correct proportion over the pole of the sphere, discarding information at the ever decreasing edges as the image projects to the poles.
Hope this is clear, and thanks again!
-Johnny

CP 8 Standard project not resizing in IE11

We were testing our projects created in CP8 in IE11 and the project isn't resizing to fit the window. These are standard projects (not responsive) but when we publish them we select the setting to Scalable HTML content. In the past in IE8 the projects did rescale.
Are we missing something?
Has Adobe done something to try and force us into using the responsive project?

Right-click functionality will be lost. And you'll have to be sure that the user has installed Flash Player, because it is no longer embedded in the latest versions of Adobe Reader.

PE 13 - Project not compatible with current version of premier elements

I have PE 13 (recently installed on a system that also has PE 10)
I archived in PE 10 to a location, openend up the project with PE 13 and it appears to open just fine. I then save and close it and try to open it up a 2nd time and it fails with the error: "Project Not compatible with current version of premier elements"
I attempted to move all the media outside of the "Copied_XXX" folder per the troubleshooting steps, but it still fails even with all the media in a different location. Funny thing is that it knows about the media still because it appears in the loading content status bar at the very bottom left of the screen. it completes all 600 or so loads, but they are definitely not on timeline or listed in project assets.
Windows 7 Professional is the OS.

stegeler
There is no guarantee that a project created in an earlier version will open in a later one. The classical recommendation is to finish a project in the version in which it is created.
If you do want to try to edit the project created in the earlier version in the later version, then make sure to work from a copy of the original. Once you edit the project created in the earlier version in the later version, you cannot go back to edit the later version edited project in the earlier version.
If you have your Premiere Elements 10 project archived, then you do not want to go moving copies of the project's source media outside that Copied Folder. The copy of the project file in that folder needs to trace back to that copied media in that Copied Folder. What you are seeing in Premiere Elements 13 is probably conforming of audio and video files, processing of rendered files, and such, maybe even some indexing. You do not want to proceed in Premiere Elements 13 until you do not see any further activity in the progress bar at the bottom right of the workspace. Have Premiere Elements 10 and 13 been on the same computer?
How did you open the project file in the Copied Folder - right clicked the project file, Open With, and then selected Adobe Premiere Elements 13? What is the duration of the Timeline of the original project in 10?
Have you been working with a copy of the Copied Folder and its contents?
More on this in the morning.
ATR

Aggregator exe project not opening another project

aggregator exe project not opening another project when published.
The same works fine in HTML.
I tried in Captivate 7 and 8 as well.

I'm having a similar issue. I've used a "home" button to return to the main menu of the course. However, all it does is return me to the last screen I was on. I've tried linking the button to a the aggregator htm and to the swf. Neither gives me the results I want. I currently have it set to open in the current window. However, I get the feeling that it's automatically invoking a bookmarking feature and I'm not getting the pop-up box asking me if I want to return to the last screen or not.

Project not connected error message, when trying to Generate DDL on NWDS

Hello,
I created EJB project with Java Persistence Facets.
2 Entities created in the EJB to Generate as Data base table on the Java dictionary project.
The connection works OK (I can ping to the JD project).
But when I tried to Generate DDL and build the table structure on the JD project I received the error message: EJB project not connected.
Has someone came across this issue?
Thanks for the help.
Nir

Thanks for the reply.
SAP NetWeaver Developer Studio version:
SAP NetWeaver 7.2 SP03 PAT0017
Thanks
Nir

Premiere Elements 10 - Project not compatible following OSX update

Hi,
I have recently been working on a project within Premiere Elements 10 on a mid-2010 iMac without issue.
Over the last weekend I decided it was time to upgrade OSX to Yosemite (v10.10) from Snow Leopard (v10.6) however since then, when trying to open this project, I receive an error that "The project is not compatible with current version of Premiere Elements".
Some of my other previous projects give the same error when trying to open, however some do not. I think it may have something to do with whether I have included a DVD menu - those that do work, do not have a menu added.
I'd like to stress that I have only ever used Premiere Elements 10 for these projects.
Has anyone had similar issues or found work arounds?
Cheers

rodb
I am strictly an Elements User and problems with the same symptoms can (often do) have different causes. But, you mention of
"The project is not compatible with current version of Premiere Elements" coupled with "DVD menus" brought back a 2011 flash back
of a Premiere Elements 9.0 Windows issue.
As a just in case, please check it out and determine if any of it applies to your situation in spite of the fact that on the surface your issue
is presenting a going from one Mac operating system to another.
Getting a "project not compatible" error in Premiere Elements 9 - Elements Village
In another more recent instance this type of error message pointed to disc menus...
PE 13 - Project not compatible with current version of premier elements
Have you checked the integrity of the related Premiere Elements 10 computer saved disc menu themes in the change from one Mac operating system to the other?
We will be looking forward to your progress.
ATR

No sound after recording but i see the notes on Logic

No sound after recording with my Keyboard. My keyboard make the sound when i record it but after there is no playback i see the notes on Logic but nothing. And if i try to copy or cut and paste the part i record from the keyboard it work after..i really don't understand!

Does it say Midi Ch 1 in the event list for the Midi region you recorded?
This is most likely to be User error... but to identify what exactly.... and to rule out any corrupted settings in LPX..
Try trashing Logic's preferences and CS prefs as per this support note.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
if that doesn't fix things then...
Which Software instrument (SI) are you trying to play?
You do have a SI loaded in yes?
You are using an Instrument Track yes?
You are not usimg an external Instrument track are you?
If you drag an Audio loop from the loop browser to an Audio track.. can you hear sound on playback?
Please post a screenshot of your arrange window showing the channel strip for the track you recorded midi to... That will help us see how you have set things up.

Project Notes in Logic 9

Similar Messages

Maybe you are looking for