Project Online: project will not move to next workflow stage

Hi, another workflow question: I've created a workflow using the SPD 2013 for a Project Online PWA. When a project has gone through the portfolio analysis it should move to either the Selected or the Not selected workflow stage. The problem is that some
projects do and some don't:
("Naam van werkstroomfase" = Workflow Stage Name)
All projects were checked in when I committed the portfolio scenario.
Does anyone else have the same experience and how did you solve it?
Kind regards,
Hester

Hello All:
I have an issue open with Premier Support and through hours of testing and tweaking, I've summarized as follows:
The 'stalls' always happen when any of the following code is added to the SPD2013 workflow. The common thread is Project Custom Fields and the code has been inserted at various points to prove the failure.
When a SharePoint Designer 2013 workflow attempts to access a large number (more than 10?) of Project Custom fields from the Start a process command, the workflow stalls. In this case we are adding custom field values to the
email body for Gate Approvers.
When accessing a large number (12 or more?) of custom fields and writing those values out to a SharePoint List as a baseline 'snapshot' of custom fields, the workflow stalls.
When attempting to update a Project Custom field value, the workflow stalled. (i.e. Set Project Status = ‘Approved’ at Gate 3)
We have pulled that code (and function) from this release and begin user training tomorrow.

Similar Messages

  • My ipod will not advance to next song, how can I fix this?

    My ipod nano will not advance to next song, neither in regular play or shuffle.  Any ideas on how to get it to work?

    Lilly.Love wrote:
    Hi, I'm new to this and for some reason my images are not appearing to full scale on adobe premiere cs6. This is really annoying as I am trying to make a stop motion video but I can't see what I'm doing. Please reply soon, this is an important project. Thanks
    Your sequence settings and clip settings are not matching. To make them match, right click on a clip and choose New Sequence from Clip and a new sequence will be created based on your clip settings.

  • HT1212 I have no idea why suddenly my iPhone5 will not move past the Password screen; also, a voice describes each button I touch, and ends with "screen locked" (not "phone locked").

    I have no idea why my iPhone5 suddenly will not move past the PW screen; a "voice" identifies each button touched (the Slide button, for example) or the PW buttons, and then ends with "screen locked" (not phone locked).

    I believe you have Voice Over on:
    You have to tap, then double-tap to select the numbers to enter your passcode.
    Then:
    Press Home.
    Tap Settings. Then double-tap Settings.
    Tap General. Then double-tap General.
    Use three fingers on the screen to scroll to Accessibility.
    Tap Accessibility. Then double-tap Accessibility.
    Tap VoiceOver. Then double-tap VoiceOver.
    Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

  • In Thunderbird while trying to move conversation results to an archive folder; if some of the results are already in the folder it will not move any.

    Hi. I often use the conversation search option when archiving my emails from inbox. I find this a very useful method of finding trails where I and multiple people have responded to each other. However If I have already moved one or more of these emails into the archive folder and select all to move, Thunderbird will not move any. I then need to individually select those that need to be moved.
    Although not a major issue I use this regularly and often come across the problem. a recent fix which allows location tab to remain on in search helps but does not resolve this issue. A slightly annoying problem and I was wondering if any one else has this issue. Also is anyone looking into a solution?

    FCPx answer: At least the answer that worked for me...
    I had the same problem, as I believe many others had.
    In my case the problem was with one of OSX Mavericks' new features: APP NAP.
    It looks like this is ON by DEFAULT for ALL Applications and that FCPx, or Compressor for that matter, will not work if this is enabled on them.
    I just disabled App Napp on FCPx and now it works, again, like a charm.
    This is how you disable App Nap: http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
    I hope this helps,
    Mariano

  • HP Color LaserJet Pro MFP M177fw makes horrible noise and will not move past initializi​ng

    Makes horrible noise and will not move past initializing.

    Hi @HealthITLadyRed,
    I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
    I have provided some steps to try to see if we can resolve this issue.
    Check and remove any packaging material inside the printer and toner.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Update the printer's firmware by a USB connection. Software and Drivers.
    Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
    I can send a private message with another step to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
    Is this a new printer?
    If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

    My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

    Trackpad does not work properly

  • My apple mouse is not working.  The pointer will not move on the screen and it keeps turning off.

    My apple mouse is not working.  I can get it to connect but it will not move the pointer.  Left and right click is working, scrolling, just cannot move the pointer.  Also, I have replaced the batteries (numerous times) but the green power light turns off after a few minutes.  Any suggestions?

    How about clean up LED hole of mouse?

  • After updating my software my computer will not move past the apple star up screen.  What can I do to fix this?

    Help!  My Mac book pro is 1 year old.  I just updated my software yesterday now upon starting up, the computer will not move past the start up apple screen. Any suggestions?

    Thanks!  I will try in the am!  Appreciate the suggestion. 

  • HT4623 The update to iOS 7 is frozen at the Terms and Conditions page and will not move no matter what I click on.  I cannot access my iPad as it is frozen on this screen.

    The update to iOS 7 is frozen at the Terms and Conditions page and will not move, no matter what I click on.  I cannot access my iPad as it is frozen on this screen.  How do I remedy this nightmare?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Then try updating the software again.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.
    Same advice helped this user for the same issue >  HT1414 tried to update to latest iOS...: Apple Support Communities

  • The select function in Pages and other apps gets stuck and the cursor will not move. What do I do?

    The select function in Pages and other apps gets stuck when I touch a word and the cursor will not move. What is the answer for this problem?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I have a Sony CDP-CX335. The door will not open and the turntable inside will not move

    Can someone please help me trouble shoot this issue. I have disconnected the power and turned back on, I have held the eject button for a minute+ with the unit on and off. The door still will not open automatically and the turntable inside will not move. There are no dics inside. When turned on the light flashes inside.

    Hi puffinparks,
    Please check the link below for further assistance.
    https://eservice.sony.com/webrma/web/index.do
    Thanks.
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • HT203176 magic mouse cursor will not move

    Magic Mouse cursor will not move.  Scroll works. right click works replaced batteries

    I'm so sorry but I overlooked your response in the previous post.
    I think you there are two options to try.     One;
    Reset the SMC (Systems management control)      https://support.apple.com/en-gb/HT201295 ....
    Two: You may have a problem with interference which could be from a TV set, particularly one of the new smart TVs, anything electronic you've either moved into the room or changed its position.   That could include another mouse or trackpad.
    Again, sorry.

  • Printhead will not move on officejet 6500

    Used the printer this morning to print a b/w copy.  It worked fine.  Later in the day wife tried to print a copy and error message said there was a paper jam.  We have done all the steps to check for paper jams to no avail.  The print head is locked in the right position and will not move to the center.  Any suggestions?

    HI,
    Unplug the power cord then manually moved the carriage to the far left side of the  printer...
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.

    Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.

    Pablos1966 wrote:
    Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
    No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
    Why don't you have the original Apple ID? Where did you get the phone?

  • I just recently bought a PC, and I just spent some money on some new songs. I plugged my iPod into the computer and my photos immediately began to sync to my photos library, but my music will not move to my iPod. Suggestions? Thanks!

    I just recently bought a PC, and I just spent some money on some new songs. I plugged my iPod into the computer and my photos immediately began to sync to my photos library, but my music will not move to my iPod. This did not happen on my old PC. Suggestions? Thanks!

    The transfer purchases option only works for tracks that were purchased from the iTunes Store.  You'll need the help of third party software to extract all other non-iTunes purchased content and music. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

Maybe you are looking for