Project Professional trial version

I downloaded the trial version of Project Professional a few days ago but when I go to open it it asks for a key which I did not write down. Is there any way to get that key again?

There may also be a change depending upon where you download from.  I've documented the US based download process at:
Project 2013 Trial Information

Similar Messages

  • Is it possible to convert 2013 Project Professional trial version to Standard full version?

    I am closing in on the end of my trial period for Project 2013. I have found that i do not need the Professional version and have therefore purchased a full retail copy of Standard. Is there a way to convert the Prof trial version to Standard, or do i
    simply need to uninstall Prof, and install Std from scratch? thx mm

    You're more than welcome!
    Check also this link that is a bit more detailed:
    http://technet.microsoft.com/en-us/library/cc750929.aspx
    If the reply answers your question, please mark it as an answer so we can close the thread! 
    Thanks!
    Guillaume Rouyre - MBA, MCP, MCTS

  • Microsoft Project Professional Trial 2013

    I tried to download MS Project Pro Trial 2013 this morning (64-bit) and my computer told me that I needed the 32-bit. So I went through the registration process again and downloaded the 32-bit.  Upon trying to run MS Project it gave me an error message
    after typing in my trial code stating.
    Error 25004: The product key you entered cannot be used on this machine. This is most likely due to previous MS Office 2013 trials being installed
    Any help would be great on how I can successfully trial MS Project.

    Hi,
    Have you installed Microsoft Project Professional Trial 2013 or Office 2013 pro before?
    Did you have installed any version of Office in this PC now?
    As far as I know, the error occurs when we try to install a Windows Installer (MSI)-based version of Office/Project 2013 on a computer on which the computer manufacturer has already installed a version
    of Microsoft Office/Project 2013.
    Please try the following steps and check they are helpful.
    Navigate to C:\Program Files\Common Files\microsoft shared
    If there is a folder called OFFICE15 or OfficeSoftwareProtectionPlatform delete that folder.
    Navigate to C:\Program Files (x86)\Common Files\Microsoft Shared
    Same as above, If there is a folder called OFFICE15 or OfficeSoftwareProtectionPlatform delete that folder.
    Reinstall
    Please note: Backup before you deteted
    Tips:
    Office 32 bit version could be installed with both of 32bit and 64 bit Windows OS.
    Make sure all versions of Office/Project are either 32-bit or 64-bit. You can’t have a mix of both.
    Similar issue:
    http://answers.microsoft.com/en-us/office/forum/office_2013_release-office_install/office-2013-activator-error-25004-even-after/eed3a057-4ff9-401d-af49-04c0262223af
    More reference:
    http://support.microsoft.com/kb/2792178
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Adobe flash CS3 professional trial version installation problem

    hi,
    I am trying to install the adobe flash CS3 professional
    trial version on windows installed and it complains that "internet
    explorer"
    is opened. I killed all the processes "iexplore.exe" , it
    still complains the same thing. Please let me know...am i missing
    something?

    Direct Download Links for Adobe Software
    Mylenium

  • Adobe flash cs3 Professional trial version

    I tried to download Adobe flash cs3 Professional trial version but the download button doesn't responds.

    Direct Download Links for Adobe Software
    Mylenium

  • Aperture sampes project with trial version?

    Just downloaded the 1.5 trial version of Aperture, and apparently it does not include the samples project, correct? Or did I blow it on the install somehow?
    I had hope to work with this for awhile till I got my feet wet.
    Thanks in advance.

    Oh, yes, I see the sample project is just over 800MB. A lot to download.
    If you are dedicated to learning Aperture, you could pick up the Apple Pro Training Series Aperture 1.5 book by Orlando Luna and Ben Long as it has sample projects on the CD that are used in the tutorials. The book is highly recommended for learning all the ins and outs of Aperture and would really give you a thorough idea of what you can do with the program.
    -Karen

  • Can import project from trial version?

    Hi,
    I've been playing with PSE8 trial version, and I've created a slideshow project.  If I upgrade to the real version, will I be able to import the project I created with the trial version?

    Has anyone tried Barbara's suggestion of smply entering serial number without uninstalling the trial version?  Is it problem-free?

  • Project 2013 Trial Version - Not working after a week

    Hello,
    I have downladed the trial version of Poject 2013, it is supossed that it is valid for 60 days and after a week I cannot update the project files, I just can see them, like "Read-Only".
    It would be wonderful if you can help me as I really need using this version.  At the moment I am working on the purchase of the license but meanwhile this is my only option.
    Kind Regards,
    Aylin

    Have you activated the trial?  Go to File > Account and activate the trial.  You will need an internet connection and yo will need to be logged in with the account you used to download the trial.

  • Projects from trial version

    is it possible to open projects I made in the trail version of adobe premiere cs6 with the full version I want to buy? And does the full version contain 'encore' like the trial version does?

    >does the full version contain 'encore' like the trial version does?
    Actually, the trial version does NOT include an activated version of Encore... Encore only runs after you buy the program so you have a license key
    The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help
    You do not need to buy a suite, if all you want is Premiere Pro and Encore
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPMZ

  • Can't find project professional trial after downloading

    I downloaded the project professional 2013 file. Was able to run this ProjectProfessional_x86_en-us. It said to open microsoft suite and I can't really find that in crummy windows 8.1. I searched project professional in the file explorer and only got evaluation-project-professional-2013[1]
    and regid.1991-06.com.microsoft Microsoft Project Professional 2013.
    nevermind I'm just removing it and customize installing.

    So, are you all set?

  • Unable to Open Project (CS4 - Trial Version)

    After futzing and cleaning up several projects, I am now unable to open them.  I may have changed the Video Preview from Microsoft AVI to I-Frame.  I get the following message when I attempt to open the affected projects:
    The project contained a sequence that could not be opened.  No sequence preview preset file or codec could be associated with this sequence type.
    Is there a way to fix this situation rather than having to start all over from scratch as I've already done for one project?
    Any tips, suggestions or errata would be most welcomed!

    For the learning of PrPro, I highly recommend the Adobe Classroom in a Book for PrPro CS4. It will step one through almost all aspects of NLE work with CS4, from the start of a Project to completion, with most necessary steps along the way.
    Now, for the Canon 5D/7D, I would strongly recommend that you look back in the forum a bit, as there have been several recent discussions on working with that footage effectively. Both Jeff Bellune and PaulineDC contributed to many of those threads. Before you have hours of footage, those threads will give you some workflow ideas.
    As for the VHS tapes, I highly recommend the Grass Valley/Canopus AVCD A-D bridges. Their AVCD-110 is a great unit, that interfaces between the VHS deck and the computer (FireWire here), and does a great job of digitizing the material. You will want to do this capture into DV-AVI Type II files w/ 48KHz 16-bit PCM/WAV audio. The AVCD-300 offers more time base corrections, and can pay the difference with just a few tapes vs the time to do corrections in the NLE. Both are well worth the investment. I would stay very clear of any Dazzle, or Pinnacle capture device (card, or box). Few ever get them to work correctly. There are some A-D cards out there, but their prices are about the same as the Canopus "boxes," and many produce files with OOS (Out Of Sync) issues. Also, some will NOT capture as DV-AVI Type II, so there are other problems, as well.
    Now, if you happen to have a video camera with pass-through capabilities, you can use that to digitize your VHS tapes. However, they are becoming rare, and are almost non-existence in Europe/UK, because of a higher VAT on them. Most models there remove that capability, even if the US version has it. Check first.
    Good luck,
    Hunt

  • Installation Error of Project Pro Trial - Error 25004

    Good day everyone. I have tried installing the Project Pro trial version and I get the error 25004 and it indicates I have a previous trial version of some 2013 software installed. Here is the setup:
    Have Windows 8.1 professional (all up to date and legal)
    Was running Office Pro 2010, Visio Pro 2010, Project Pro 2010 (installed from authentic MS CD's)
    Upgraded with the company I am with to Office 365 Business (installed from web and legal )
    I uninstalled all my office Pro 2010 software except for project pro 2010 and Visio Pro 2010
    When I first encountered this problem I uninstalled all Office 365 software using the FixIt program, then uninstalled all 2010 software. I tried reinstalling the Project 2013 Trial first, but no luck. I tried the manual install and no luck also. I have not
    tried a safe start install.
    I am getting frustrated since I have heard or done the following:
    I was told that I can't add the Project Pro for 365 to our business license since we would need to upgrade to enterprise version, which is not going to happen
    try using the MS FixIt program - no luck and same error.
    I need to a complete re-install Windows - not likely to happen. Seems a bit extreme.
    even a new install of windows won't fix the issue...really?
    Lastly I heard that MS is aware of this issue. The question is are they working on a fix or am I stuck?
    Before I go out an invest $1500 on the software, I want to make sure I can install it. 
    My questions are:
    could this have something to do with my Office 365 (Business)?
    Is this going to inhibit my ability to install Project 2013 (fully licensed version)?
    Any help would be appreciated!

    Good day everyone. I have tried installing the Project Pro trial version and I get the error 25004 and it indicates I have a previous trial version of some 2013 software installed. Here is the setup:
    Have Windows 8.1 professional (all up to date and legal)
    Was running Office Pro 2010, Visio Pro 2010, Project Pro 2010 (installed from authentic MS CD's)
    Upgraded with the company I am with to Office 365 Business (installed from web and legal )
    I uninstalled all my office Pro 2010 software except for project pro 2010 and Visio Pro 2010
    When I first encountered this problem I uninstalled all Office 365 software using the FixIt program, then uninstalled all 2010 software. I tried reinstalling the Project 2013 Trial first, but no luck. I tried the manual install and no luck also. I have not
    tried a safe start install.
    I am getting frustrated since I have heard or done the following:
    I was told that I can't add the Project Pro for 365 to our business license since we would need to upgrade to enterprise version, which is not going to happen
    try using the MS FixIt program - no luck and same error.
    I need to a complete re-install Windows - not likely to happen. Seems a bit extreme.
    even a new install of windows won't fix the issue...really?
    Lastly I heard that MS is aware of this issue. The question is are they working on a fix or am I stuck?
    Before I go out an invest $1500 on the software, I want to make sure I can install it. 
    My questions are:
    could this have something to do with my Office 365 (Business)?
    Is this going to inhibit my ability to install Project 2013 (fully licensed version)?
    Any help would be appreciated!

  • Re-installation of project 2013 trial doesn't work

    Hi,
    i had downloaded project 2013 trial version 2 days back, installed it and it was working fine.
    next day, i was facing some issues with laptop, so I uninstalled it.
    Now when I try to re-install using same exe, it is not working.
    It is only giving error as  - 'The installation of this package failed'.
    Pls help on how to re-install mpp. I need it urgently.

    My hunch is the "issues" you allude to are possibly the root cause.
    --rms www.rmschneider.com

  • Got Error #34 when installing Flash trial version by Creative Cloud

    I got Error #34 when installing Flash Professional trial version by Creative Cloud, how to fix it?

    Without proper system information and otehr details nobody can tell you anything.
    Mylenium

  • How do I transfer work done in trial version to the paid version?

    How do I transfer a project from Trial version to the paid version?

    Should be seamless.
    You may have to UPDATE from an older version (10.0.x) to the newer version that is now on 10.1.4 as it uses the Library method.
    This updating within FCP X needs to be done the correct way. It is wise to proceed only when you are familiar with the process.
    Search this forum for "updating" there is plenty of how to info.
    Al

Maybe you are looking for

  • Requirements for the DHCP extention

    What are the requirements to use the DHCP extension in SCVMM 2012 R2? I do not use network virtualization and in SCVMM I have one logical switch configured (no virtual network adapters) I have multiple VLAN's so I am doing tagging on the teamed NIC's

  • Check on Item Category

    Hello, I have a requirement where I need to perform a check on item category for each sales order line item. if the item category is u2018ZTASu2019 then before saving the document the user should be prompted to verify . I was thinking to use user exi

  • Having problems uploading an album to create a book.  iPhoto will compile the data, but fails to upload. Error message allows a "Retry", but its a dead end.  (iPhoto 11)

    I can't get iPhoto 11 to accept my album to create a book.  Compiles OK, but bombs out when uploading.  I have tried Safe Mode and eliminating Energy Saver. I have pulled out the Preference file and re-inserted after logging back in, but nothing seem

  • 1099 PATR reporting

    Hi Guru's: Does SAP support 1099 reporting for PATR i.e. reporting to IRS for patronage payments. We need to issue the 1099 PATR form and also report electronically to IRS. Please help me out on this. Thanks

  • Why does not sync folder work?

    Hi, Running Lightroom 5.5. I am in folder Dress.  I export picture Dress 001.nef to a jpg.  To the same folder.  It does not show up. I then select sync folder, the jpg picture does not show up???? I go to show folder in explorer.. It show Dress 001.