Project Profile for templates CJ91

Hi ,
I am an SD consultant and quite new to PS. Please execuse if my question is basic.
    When i am creating a template in transaction CJ91 system is defaulting the "Project Profile (Proj-PROFL)  " value as  "DPSC1"  and that filed is in grey mode. I couldnt make changes to that filed" .Can some one let me know which setting controls this and what makes system to default a value for this field.
Also could you let me know on the significance of these fields "Project Profile (PROJ_PROFL) and WBS status Profile (Proj-STSPR).
Thanks in advance,
Srini

Hi Sreekanth and Gokul,
   I will assign project profile "DPSC_T1" to my new template , still I copy it from another template which is with the profile "DPSC1". When I tested in our sandbox in CJ91 initial screen i can specify a different project profile and in the column STD Proj defintion i give a template name which has different Project profile.System is allowing me to do so
Will there be any negative impacts going with this option?. Please suggest

Similar Messages

  • Creating Project Profile in SAP R/3 Project System

    Hi All
    While creating a project definition in Project System in SAP R/3, it is the mandatory to select a Project Profile from a pick list. How can I create a new project profile for myself?
    Thanks
    Sheenam

    It is mandatory to select a Project Profile while creating a Project Definition. Project Profile can be created using OPSA transaction.
    regards
    Shravan

  • Defalut Project profile

    Hi,
    I want to make default project profile for project coding mask.
    I have 2 different types of projects. 1 is starting with HHD/2008/001, HHG/2008/001
                                                       2nd starting with HPC/2008/001, HPW/2008/001
    I have 2 Project Profile. Profile - 1000 n 2000
    I want to have default project profile like, if the Project is starting with HH, it should pick only 1000 and if the project is starting with HP, it should allow only 2000 Profile.
    As both the Projects have different Co Codes.
    Advise me the best solution. Rewards Points guarnteed.
    Regards
    N.Raju

    Try this-
    T Code : OPSI
    Validation for Project Definition:
    Prereq:
    PROJ-PSPID :1-2: = 'HH'
    Check
    PROJ-PROFL = '1000' OR PROJ-PROFL = '2000'
    If check NOT fulfilled.
    Error
    Refer this in the project profile.
    Regards
    Sreenivas

  • Display Project Profile in CJ01

    Hello,
    Can anybody help how I can make Project Profile to be displayed in CJ01? I can see only the description from OPSA, but it does not include the Project Profile.
    Thank you.
    Rodica

    Hi,
    No, its not possible to display only mode in CJ01 initial screen. Because in CJ01, you have take project profile for creating project.
    For SAP PS document: You have to Google as per your requirement. There are many documents available.
    Some are:
    http://help.sap.com/saphelp_46C/helpdata/EN/3d/72369adc56d11195100060b03c6b76/frameset.htm
    http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=35769
    Regards
    Shishir

  • Manual creation of Project Site for a project is taking old project site template.

    Dear All,
    I have modified the project site and save it as a template to associate it with an EPT so that the modification will reflect in new project sites.
    For existing projects, I am deleting the old project sites (after taking backup) and recreating so that new modifications will be there for existing projects and I am able to do so.
    But, for 1 of the project, when I have deleted the project site and recreated, still it is taking the old template (i.e. new modifications has not been seen).
    Kindly advice in some areas so that I can jump in and around and can find out a solution so that the project site will take modified project template.
    Example to get the issue in an easy way:
    ProjectA:
    Project Site: http://epm/pwa/ProjectA
    Issue List:
    Column: Category [data type as Choice: Cat1, Cat2, Cat3]
    Have saved 1 project site as a template and associated with an EPT with the following changes:
    Column: Category [data type as Choice: Choice1, Choice2, Choice3]
    Then, deleted the project site: http://epm/pwa/ProjectA and recreated.
    So, it should take the modifications in the project site.
    But, it is showing as Column: Category [data type as Choice: Cat1, Cat2, Cat3].
    Regards,
    Shravan

    Dear Guillaume,
    Thanks for your response.
    Please seem my comments inline:
    Which Project Server version do you use?
    PS 2010
    It is working well and as expected for all projects except for 1 specific project?
    Yes. It is working well for other projects except 1 project.
    Has this project something particular?
    Nope. It is similar as other projects.
    How do you proceed to create the new project site? Do you go to the site actions, then new site and pick up your new template?
    First I have modified 1 of the project site and saved that site as a template.
    Then, I have deleted the existing project site (from Project Sites under Operational Policies) and recreated so that project site will gets created from the new template. But, it's not happening.
    Regards,
    Shravan

  • Validation for Project defination and project profile

    Hello,
    I have to create validation for Project Definition and Project Profile.User requirement is when the project (Exp: Z/0120) is creating with project profile Exp: Z0001_Z system should allow , If user is trying to select other than this profile system has to give the error.
    I tried below validation but it is not working:
    Prerequisite - PROJ-PSPID = 'Z'
    Check   -  PROJ-PROFL = Z0001_Z
    Kindly any suggest how can i give the validation for the same.
    Regards,
    Lakshmi.
    Message was edited by: Mohamed Rafi - Many threads available on this topic search for those.

    Hi,
    Have you tried to save the project? Because validation rule will call at time of saving the Project.
    I have created the same but for start with 'U'
    When I create project and at time of saving, validation rule will call and system throw error if I don't create project start with 'U'.
    Now If I am creating here, start with 'J'. System  is throwing error as per validation rule.
    Also Pl check if you have assigned same correct rule on project profile.
    Regards
    Shishir

  • Object or Bdoc type for project profile(PS)

    Hi,
    we have to integrate SAP PS and CRM marketing Campaign to transfer the cost of the campaign. In CRM we have a node where we assign the Project profile to the Logical client in CRM in SPRO.
    We need to know is there a separate object or BDOC type for this or is it part of some of the existing Bdoc.
    Thanks
    AJ

    Thanks Joaquin,
    Please can you elaborate more on which transaction or rather where can we pull the object from...Is it part of initial load settings?
    We dont find it there.
    Thanks
    AJ

  • PS: Setting Project Profile as a mandatory field for Project Definition

    Hi,
    I would like to know how to set Project Profile as a mandatory field for Project Definition (CJ20N or CJ01).  I tried to look for controls at OPUK config but the Project Profile is not available for definition - either mandatory, optional, suppressed, etc.  Would appreciate if you can share your expertise on this.
    Thanks!
    Regards,
    Vivian

    Hi,
    I would like to know how to include some additonal fields in OPUK/OPUJ.  We have defined some .INCLUDE component / fields to SAP standard table PRPS/PROJ.  We want those fields to also appear in OPUK/OPUJ so that we could also defined their characteristics - whether input, mandatory, suppressed, etc.
    Thanks!
    Regards,
    Vivian

  • Datsource for extracting Project profile to BW in CJ20n TCode

    Hi,
    I'm lookin for a datasource which brings Project Profile to BW.Project profile can be seen in Transaction code
    CJ20n>Control Data>Project Profile
    Thanks,
    SP.

    Hi SP
    did u manage to extract  this?? Im looking for the same filed.
    Please let me know how did u do it??
    Regards
    Robyn.

  • Restricting Budget Profile for project profile in CJ01

    Hi,
    I have a scenario where users are asking to restrict the budget profile for a project profile in CJ01
    For example.
    Say i have the following Budget Profiles
    ZXXXXX1
    ZXXXXX2
    ZXXXXX3
    ZXXXXX4
    and
    Say i have the following Project Profiles
    A1
    A2
    A3
    A4
    The requirement is - I want to restrict the following way in CJ01 when I create a project.
    For Project profile A1, I want to see only the budget profiles ZXXXXX1 and ZXXXXX2
    For Project profile A2, I want to see only the budget profiles  ZXXXXX1 and ZXXXXX3
    For Project profile A3, I want to see only  the budget profiles ZXXXXX3 and ZXXXXX4
    For Project profile A4, I want to see only  the budget profiles ZXXXXX4 and ZXXXXX1
    Can I achieve this? If yes, then can you detail the steps. Please let me know. 
    Regards,
    MS

    Mukund,
    Try out puting in a validation as per your requirement.
    Regards
    Sreekanth

  • Customer Input Templates for template project

    I am unable to see all the three CI templates specific for organizational data , master data and business process in the template project.These are part of  standard document types available in solution manager for template project.Are there any settings/patches related to the same?

    Hello Prasad,
    Regarding the CIT, the following types are delivered with SAP Solution Manager 4.0:
    CIT     Customer Input Template Business Processes
    CITG     Customer Input Template Business Processes (Global Project)
    The later one is to be used for global or template projects. As you can see, there is only ONE specific template which is delivered by SAP. However, you can design your own templates in the project template directory in transaction SOLAR_PROJECT_ADMIN.
    This information is based on SP10, however, I am not aware of any changes in earlier support packages of ST (being the software component which might possibly include such changes).
    So this is the current status - I hope this information helps.
    Best regards,
    Doreen Baseler

  • Validation Rule for the coding mask and project profile

    Hi,
    I have two project profile and two coding masks. I want one project profile to be only used by defined coding mask for that profile.
    So i have maintained a validation rule as follow -
    Prerequisite - Project Def. :1-3: = 'A5M'
    Check - Project Profile = 'ABC'
    And if the above check is failed then give me an error message.
    Now i am trying to add the project profile other than 'ABC' for the coding mask starting with 'A5M', but still the system is not giving me an error message configured and allowing me to save the project.
    Is there any other thing which is tobe activated other than assigning the validation rule in project profile and clicking the Autom. validation check box in OPSA.
    Request to confirm share the views.
    Thanks

    Hi,
    Try the following, this must work.
    Prerequisite
    PROJ-PROFL = "ABC"
    Check
    PROJ-PSPID: 1-3: = "A5M"
    Message
    Project profile & Coding mask wronly assigned
    Repeat the same for other project profiles also.
    Enter this validation in your project profile. Check in "Auto Validation"
    In transactinal data,
    Enter project def and select the wrong profile. when you save the project system will show you the error message.
    Hope this will help you.
    Regards
    Prabu

  • Planning/Budget Profile always required for Project Profile?

    Hi,
    Are planning and budget profiles always required fields for Project Profile?
    Thanks!
    Regards,
    Vivian

    Hi,
    Thanks for your reply.  May I know if you could advise relevance of the planning and budget profile?  what if I do not specify them in my Project Profile? What will be the impact or default values if they are not specified in the project profile.
    Thanks!
    Regards,
    Vivian

  • BAPI for Getting Project Profiles in Project System

    hi,
         Can any 1 tell me the BAPI to invoke to get project profiles from project system.
    Thanks,
    Debashish Sarkar

    see if this thread is of any help
    Re: File Inputfield - ABAP functions to store files?

  • Settlement of WBS/Project Profile (Cross Company Code)

    Hello All,
    At my current client, we are having 45 company codes assigned to one controlling area.My question is around setting of Project Profile/Settlement Profile. How do I manage project profiles?
    Also If I am managing few project profiles allowing cross company code settlement, what are the pros and cons of doing this? What are the bare minimums for this with respect to configuration
    Thanks
    Shiv

    projects are cross company codes but must be wuithin oine controlling area - so you are ok
    the settlement will be from an object either WBS or network activity
    the settlement will happen in the company code that is assigned to either the WBS or network activity
    regards project profile create as less as possible - if the only difference is the company code then use templates for different companies, or make company code mandatory forcing the user to enter on creation - this will limit the number of project profiles

Maybe you are looking for