Project's report change dynamicaly from portal

Hi all,
We Have BW project's report & we want to change the
WBS Hierarchy dynamically from the portal.
The problem is this,
When we add this parameters to url:
&FILTER_IOBJNM_1=0WBS_ELEMT&FILTER_NODE_IOBJNM_1=0WBS_ELEMT&FILTER_VALUE_1=P2.2005.999
We can see only the current WBS with out the hierarchy connect to this WBS .
Can some one help us with this?
Regards Nir

Hi Hemant,
does this error also occur if you try it with cProject started as stand-alone application (i.e. without the portal)?
You can try this, if you start SE80 on the cProjects backend, choose Web-Dynpro component 'DPR_MAINFRAME', expand the last node in the tree: 'Web Dynpro Applications'. Right-click 'cproject' and from the pop-up menu select 'Test'.
If things run smoothly, some settings of the portal are off.
Hoping this helps narrowing down the issue.
Best regards,
Thomas

Similar Messages

Cannot load project status report in cprojects on portal

Hi,
I have checked all the FP_* adobe test programs and my ADS is working fine. I did test my form in ECC transaction code sfp and the form loads properly.
But, when I try to load the project status report(same form) through portal (cprojects)it is giving me connection timeout error.
Could somebody guide me?
Thanks.

Hello,
there can be several reasons why the Statusreport does not come up
a) ACF component is not installed correctly
Check as described in note [766191|https://service.sap.com/sap/support/notes/766191] if the ACF is installed correctly
b) ADS is not set up correctly
Check as described in note [944221|https://service.sap.com/sap/support/notes/944221] if the ADS is installed correctly
c) cProjects config for the status reports is not set up correctly
Check as described in note [978997|https://service.sap.com/sap/support/notes/978997] if your system is set up according to the configuration guide
Best Regards, Andrea
Edited by: Andrea Langlotz on Jun 11, 2008 8:55 AM

Printing SAP Reports (Transactional iviews) from Portal

I am having problem in printing the SAP Transactional I views (SAP Reports Output) from the Portal page. On selecting the Print Option under Menu from the SAP transactional iview page, it shows the list of the printers in the backend system. On selecting the printer configured in backend abap system and issuing a print command, it only creates a spool request in the backend system and nothing is sent to the printer itself.
I have also tried to use "PDF1" device type by creating a new output device and it does bring the contents of the report on a web embedded PDF page, hoever the characters are too small and to read and the ALV Report is no longer aligned. The line separating the rows and columns are not aligned.
Can anyone help in suggesting the best way to print contents of SAP Reports (created as Transactional i views) from the SAP Portal.
Thanks!

Hi Margie,
It is not necessary for a developer to have access to that area, and certainly not in a production system.
Ideally, there should be developer, test, QA and production systems, and the developer can have access to the developer system. The UI you are talking about gives access to all WD applications deployed to the AS Java, and the ability to run them as well as change some settings. But this is the domain of the administrator.
Hope this helps.
Daniel

Deploying forms and reports with parameters from portal

hi , how do i build forms and reports from database limiting them with parameters from the login details on the portal on my application server.

I had the same problem.
I resolve with a new third party tool:
RunDev
I've found it on:
solutionmarketplace.oracle.com
searching "rundev".
James

Saving BI Report templates created from portal view

Experts,
In our company, we have a Corportate Portal (its SAP Netweaver/ SAP Portal 7.0), in which a BI Portal connects to this Corporate Portal. In our portal, we have a process in place which tracks our products, and we also have BI Reports within this portal in which you can access and execute to view reports (which then can be printed out)..
*Question:*
Obviously BI Reports allow a user to format the reports to there needs (through the web portal)...If a user finds a very good format and wants to save it (to give to other users or to reload a different for themselves without have to redo it) through the portal, can they do that? IN other words, is it possible to save templates through the web portal for other users of that web portal to have?
Note: we do not use Bex query designer

James,
If I understood your question then all the user has to do when they put together a report variant that they would like to share is when saving the variant add a technical name as well and that makes that variant visible to all users of that report on the portal. Hope this helps.
Regards,
Rudy B.

PDF Reports from Portal

My goal: PDF report for print-out, launched from Portal, that displays text and image (.jpeg, .gif, .bmp, etc.) data pulled from the database. Currently, users retrieve this data right from the portal via JSP portlets. This works great. We'd like to get a good-looking report containing this data for inclusion in electronic documents and hard copy files and PDF seems a good way to go. Right now, my idea is to create the report from SQL query in Report Builder creading a .rdf file and somehow launch this from the Portal allowing users to pass selection parameters.
Questions:
1. What's best way to launch a .rdf report (PDF output) from Portal?
2. What are the tricks of pulling in and displaying blob data (from Portal30 schema) in a .rdf report with PDF output?
Thanks!

Take a look at the Portal - Reports integration documentation. It will tell you how to deploy Oracle Reports on the Portal.
As far as displaying images, Report Builder Online Help -> search on word image ->selecting image from the database.
My goal: PDF report for print-out, launched from Portal, that displays text and image (.jpeg, .gif, .bmp, etc.) data pulled from the database. Currently, users retrieve this data right from the portal via JSP portlets. This works great. We'd like to get a good-looking report containing this data for inclusion in electronic documents and hard copy files and PDF seems a good way to go. Right now, my idea is to create the report from SQL query in Report Builder creading a .rdf file and somehow launch this from the Portal allowing users to pass selection parameters.
Questions:
1. What's best way to launch a .rdf report (PDF output) from Portal?
2. What are the tricks of pulling in and displaying blob data (from Portal30 schema) in a .rdf report with PDF output?
Thanks!

Run Oracle Projects Report from Portal

Is there a way to run one of the canned Oracle Projects reports from Portal? Are these Oracle Projects reports URL addressable? If so please tell me where I can find some documentation on how to do this?

You can create an iView in portal following a template to include an "SRM Transaction".

System time out when saving report from portal

Hi,
We have a problem where the report output either gets time out or gives an output after 30 minutes if we try to save a report from portal in the form of excel.( report is run on the web)
Generally the query output has not more then 32k records.
Is it the number of records in the portal output which is the cause of the issue??
This is not the issue with the reports with leess number of records.
Can we do something to improve the performance here??
Thanks
Ajeet

Try creating aggrates on the cube. this may change the performance.
also you can change the query execution time.
but better check for some performance tuning by using aggrates.
check below suggestions also:
query execution
regard: gaurave

Changing databases from MS SQL Express to MySQL in a Report at runtime

Hi all,
I have an issue in changing databases from MS SQL Express to MYSQL or vice versa in a Report at runtime.
Here is what I do:
I create a very simple report with the Crystal Report Designer 2008 V 12.3.0.601.
This report uses a stored procedure to retrieve it's data. I connect to the Database with JDBC.
I have two Databases with similar schema and procedures: MS SQL Express an MySQL.
When I create the report with MSSQL all parameters have the '@' character, as they are named. ok.
I deploy this report in a JSP application with the crystaldecisions SDK an show it in html viewer format.
The connection to the MSSQL DB gets established by my JSP and the CRJavaHelper.
I pass the parameters through my URL to the JSP and finally to the CRJavaHelper (addDiscreteParameterValue)
and everything works fine.
The challenge starts, when I try to change the Datasource of this report to MySQL at runtime (which is a requirement in my project).
I successfully can establish the DBConnection, but my stored procedure just doesn't get called!
The report just displays totally empty, no Exceptions etc. are thrown. In the DB logfile I see the effort to find my procedure
and that's all. The Statements called by the SDK finds the correct Procedure, but there's no call to the procedure.
Of course I know, that MS SQL names it's procedures slightly different (';1' at the end), but even when I rename the table Alias to the correct name in CRHelperJava, I get no call to the procedure in MySQL. I also renamed the parameter-fields in changeDataSource(..) by casting the table to IProcedure and working on its methods. Still no success.
What am I missing to do or what do I do wrong?
Any suggestions or even solutions?
Best Regards,
Tom

after all I have managed to set param Values, now I'm stuck because the parms seem to have dissappeared in the formula fields. E.g. I receive this Exception:
<br><br>
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Ausnahme in Formel ""{@DurationMin}"" bei ""{dataProc.Duration}"":
Dieser Feldname ist unbekannt.---- Error code:-2147467259 Error code name:failed
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2285)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:733)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
     at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
     at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
     at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
     at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
     at com.crystaldecisions.sdk.occa.report.application.RowsetController.getSQLStatement(SourceFile:1485)
     at org.apache.jsp.report_jsp._jspService(report_jsp.java:360)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:386)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:859)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.crystaldecisions.reports.dataengine.DataEngineException: Ausnahme in Formel ""{@DurationMin}"" bei ""{dataProc.Duration}"":
Dieser Feldname ist unbekannt.
     at com.crystaldecisions.reports.dataengine.DataSourceManager.do(SourceFile:692)
     at com.crystaldecisions.reports.dataengine.DataSourceManager.new(SourceFile:607)
     at com.crystaldecisions.reports.dataengine.DataSourceManagerCoordinator.a(SourceFile:505)
     at com.crystaldecisions.reports.dataengine.DataSourceManager.a(SourceFile:1060)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:729)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:699)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.i(SourceFile:1308)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.k(SourceFile:1297)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1310)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661)
     ... 32 more
Caused by: com.crystaldecisions.reports.formulas.FormulaException: Ausnahme in Formel ""{@DurationMin}"" bei ""{dataProc.Duration}"":
Dieser Feldname ist unbekannt.
     at com.crystaldecisions.reports.formulas.o.a(SourceFile:1041)
     at com.crystaldecisions.reports.formulas.o.do(SourceFile:1013)
     at com.crystaldecisions.reports.formulas.o.new(SourceFile:688)
     at com.crystaldecisions.reports.formulas.o.else(SourceFile:459)
     at com.crystaldecisions.reports.formulas.f.void(SourceFile:65)
     at com.crystaldecisions.reports.formulas.FormulaParser.a(SourceFile:345)
     at com.crystaldecisions.reports.formulas.r.a(SourceFile:89)
     at com.crystaldecisions.reports.formulas.FormulaInfo.a(SourceFile:570)
     at com.crystaldecisions.reports.formulas.FormulaService.compile(SourceFile:347)
     at com.crystaldecisions.reports.reportdefinition.FormulaCompiler.a(SourceFile:139)
     at com.crystaldecisions.reports.reportdefinition.FormulaFieldDefinitionBase.compile(SourceFile:928)
     at com.crystaldecisions.reports.reportdefinition.o.a(SourceFile:1360)
     at com.crystaldecisions.reports.reportdefinition.o.a(SourceFile:1348)
     at com.crystaldecisions.reports.reportdefinition.o.a(SourceFile:4225)
     at com.crystaldecisions.reports.dataengine.DataSourceManager.do(SourceFile:687)
     ... 41 more
<br><br>
where dataProc is my stored procedure and @DurationMin is a function field.
do I have to call verifyDatabase() when I have changed DBs and set the param Values?
Is there a defined sequence to execute these steps?
Edited by: tomspengler on Dec 8, 2011 1:55 PM

Report changes not reflected in Portal

Hi,
I have a report designed in Business Intelligence Front end tool. I have added that report to a role created in BI backend and assigned the report to that role. I am executing the report in Portal through SSO and the report is executing successfully.
I made changes in the report and assigned it to the role again. When i execute the report in portal, the changes are not reflected. But when i check the same report in Portal using another team mate id, he is able to see the changed report. We checked the iview of the report in portal and the changed report is there in portal. But i donno why it is not showing up for me. We cleared the Browser cache and checked again but the result is same. We both have the same roles, so nothing to do with the Roles. I think the problem is in portal, but dont have an idea on where to check it.
Help me in this regard. Thanks for your time.
Regards,
Murali

Hello Murali,
This is strange but please do this simple test & confirm:
Run the iView using your colleague's id. Copy the complete URL from the browser.
Open another fresh browser session, pasting the URL login using your credentials.
What do you see now? Do you see the change?
This a simple method to filter out the issue..whether its related to backend or not.
Awaiting Reply.
Regards,
Ritu

Downloading BW report from Portal into Excel

Hi All,
When a user is trying to download a BW report from Portal into Excel, it is prompting for User id and password of backend.
But since portal has SSO this should not happen??
Once the Uid and Pwd has been entered the report works fine.
Why is this happening ??
Need Urgent Help regarding this issue...
Thanks in Advance.
Regards,
Shailesh Nagar

are you connect the portal with proxy?

Print BW Report from Portal 6.0

Hi,
I have a BW report iView and I would like to print the BW report from Portal. I don't see an option to print directly from Portal.
Is it the only way to print is "export to Excel and print it from there" ?
We are on EP6 and BW 3.5.
Thanks for your answers.
Regards,
Megha.

Hi Megha Bokam,
I'm not a BW person but as far as I remember there is an HTML section when creating BW reports.
Try to put:
<a href="javascript:print();">Print Report</a>
in tis HTML section.
Omri

Move change request from a maintenance project to another project

Hello all,
we want to close a maintenance project A and create a new maintenance project B. We have a lot of change request they aren`t finish, so we want to move them to the new maintenance project.
The following steps we have done:
1. Doing all phases of the maintenance cycle of project A.
2. Close maintenance cycle project A.
3. Create a new project B.
4. create a new maintenance cycle for project B.
Now, we have the problem, that all change request from project A and maintenance cycle A didn't move to the new project B and cycle B.
If you create a new maintenance cycle in project A, all open change requests move to the new cycle. But we want to move them to a new project and a new cycle.
Have anybody a suggestion how to do this?
Kind Regards
Marc

Hello Marc,
there are a couple of methods in a class that might help you if you DO have to do it... but SAP will not support you in case you have any problem.
you can take a look to methods of class CL_HF_HELPER.
Methods :
SET_BO_LINK_TO_CHNG_DOC is used to set link between SDMJ and SDMN
SET_BO_TASKLIST_OF_CHNG_DOC is used to set link between SDMJ and tasklist
as there are those methods, to create links SAP, provides some others that are supposed to break them (If i remember well they are not activated or finished but you can still have a look !!)
Those methods are
DELETE_BO_LINK_OF_CHNG_DOC
DELETE_BO_TASKLIST_OF_CHNG_DOC
RECREATE_BO_LINK_OF_CHNG_DOC
RECREATE_BO_TLIST_OF_CHNG_DOC
Hope this helps
One more time... be carefull with those methids... I think it s quite dangerous to handle those kind of things without SAP's support.
Also, one mote thing... since many many customers have asked for this functionality; SAP is trying to develop the whole thing (with adjustments of Checks functionalites of ChaRM) for the next releases. Maybe that will be part of the next release
Regards
Khalil

Exporting a BI report to excel 2007 from Portal

Hi,
Any one please let me know is there any option to export a BI report from portal to MS excel 2007, the option which we have directly prompts to save in 2000/2003.
Regards,
Pradeep

Hi Pradeep,
Could you please try if following trick works:
1. Open the report at Portal.
2. Export it as 2000/2003 format.
3. Open the downloaded report with your MS Excel 2007
4. Save it as 2007 MS Excel format.
Sorry as I haven't personally tried above but just a suggestion; Please let me know if above works or not?
Regards,
Anuj

How to find out source qurey or query view   from portal report.

Hi mates.
we are using portal to display our report online. I want to kind out from portal Reports (charts or table) , which are queries or query view is used for display those portal charts or tables.we are using Lotus notes to publish web reports in Portal.
Regards.
hari

Hello,
Check these tables:
VARI     ABAP/4: Variant storage (similar to INDX)
VARICON     Selection variants: Content
VARICONCI     Selection Variants: Content (Cross-Client)
VARID     Variant directory
VARID_CI     Variant Catalog, Cross-Client
VARIDESC     Selection Variants: Description
VARIDESCCI     Selection Variants: Description (Cross-Client)
VARINUM     Internal number assignment for variants
VARIS     Assignment of variant to selection screen
VARIS_CI     Assignment of Variant to Selection Screen
VARIT     Variant texts
VARIT_CI     Variant Texts, Cross-Client
VARK     Delivery Plan: Customer-Specific Itinerary
VARZ     Delivery Plan: Zone-Specific Itinerary
If useful reward.
Vasanth

Project's report change dynamicaly from portal

Similar Messages

Maybe you are looking for