Project Save "Getting Queued" from PWA

Hi -
In the past we have seen these save jobs that get stuck in the "Getting Queued" status; but these were related specifically to save jobs submitted from MS Project. In some cases these were bandwidth related (poor network from the client to the
server) and in others, a case of the user closing the client software before the job has sent fully to the server.
But now in PS 2013, we have seen this occur when the save job is submitted from PWA!!
Has anyone experienced this or have any insight???
Thanks
Shane
Shane O'Hanlon (Accenture)

Shane,
One more thing I would suggest you to check in that case, is the Project Schedule Template. I have seen this issue in the past, when my schedule template attached to the EPT was corrupt (or) has an issue in some way.
Take the schedule template off and see if things work. if yes, then you will need to get into the troubleshooting of the template (or) build a new one.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Similar Messages

How to run a project which gets parameters from a batch file

Hello all,
I use to run a program, which gets parameters only by interactive mode, using a batch file as you can see below:
# myprogram < batchfile.txt
Now, I'm updating its code by SunStudioExpress IDE and I'd like to run it from the batchfile. I have noticed that the project properties window has the option run -> arguments, however this program doesn't accept arguments this way and for changing it, I'd have a hard job.
Does someone know how to run this project and to get its parameters from batchfile?
Regards,
Glauber

Ah, it appears that when you run the project, "<" is passed as one of the arguments and is not treated as input redirection.
Sorry, it looks like it is not possible to do the redirection; and it looks like a bug to me. Could you please file it through bugs.sun.com? It shouldn't take long as the problem is evident now.

How to take the back of all the Projects from PWA 2007 to PWA 2012

I had already created projects in PWA 2007 and i want to take the backup of all the projects in PWA 2013 .how to do that .Please reply soon.

Hi,
assuming you want to use Project Server 2013 (there is no 2012).
If you want to get everything from 2007 into 2013, you should perform a migration:
https://technet.microsoft.com/en-us/library/ee662496(v=office.15).aspx,
https://technet.microsoft.com/en-us/library/ff603507(v=office.15).aspx, and
https://technet.microsoft.com/en-us/library/ff603507(v=office.15).aspx#section3
If you only need to get certain projects, you can save them as local file from 2007 and re-save them to 2013.
Does that help?
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Unable to edit the Project details from PWA in Project server 2013

I am Migrating the project from MS Project 2007 to MS Project 2013.In that i save the project as a file first in 2007 and then open that file in MS Project 2013 And publish it.But in some Project when i am Trying to change the projects details from
PWA in Project server 2013 and then trying to save then the projects are not saving and are generating the error as shown below
•GeneralQueueException:◦GeneralQueueException (9131). Details: id='9131' name='GeneralQueueException' uid='f7bb5d93-20e9-e411-b302-005056ae159c' messageID='2' exception='System.TimeoutException: This request operation sent to net.pipe://localhost/pscalc_13c43af4a7d34a2c8145b776b325a865
did not receive a reply within the configured timeout (00:05:00). The time allotted to this operation may have been a portion of a longer timeout. This may be because the service is still processing the operation or because the service was unable to send a
reply message. Please consider increasing the operation timeout (by casting the channel/proxy to IContextChannel and setting the OperationTimeout property) and ensure that the service is able to connect to the client. Server stack trace: at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message
message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.Office.Project.Server.Interfaces.ICalcService.OpenProjectRemappedProject(CalcServiceCallState callState, Guid realProjectGuid, Guid remappedProjectGuid, EngineSessionState& sessionState, EngineSessionType sessionType,
PSError& psError) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceChannel.OpenProjectRemappedProject(CalcServiceCallState callState, Guid realProjectGuid, Guid remappedProjectGuid, EngineSessionState& sessionState, EngineSessionType sessionType,
PSError& psError) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.<>c__DisplayClass2.<OpenProjectRemappedProject>b__1(ICalcServiceChannel calcServiceChannel, PSError& localPsError, EngineSessionState& localSessionState)
at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.<>c__DisplayClass6e`1.<RunCalcServiceOperation>b__6c() at Microsoft.Office.Project.Server.Base.IdentityUtilities.<>c__DisplayClass1`1.<RunWithAccessToAppTierServices>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback
secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at Microsoft.Office.Project.Server.Base.IdentityUtilities.RunWithAccessToAppTierServices[T](Func`1 action) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.RunCalcServiceOperation[T](CalcServiceOperation3`1
func, EngineSessionState& sessionState, String scopeName) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.OpenProjectRemappedProject(Guid realProjectGuid, Guid remappedProjectGuid, EngineSessionState& sessionState, EngineSessionType
sessionType) at Microsoft.Office.Project.Server.BusinessLayer.ProjectEngineUpdate.OpenProject() at Microsoft.Office.Project.Server.BusinessLayer.ProjectEngineUpdate.HandleUpdate() at Microsoft.Office.Project.Server.BusinessLayer.ProjectQueueDispatch.HandleProject2(MessageContext
mContext, ProjectMain project, ServerEventManager sem, ProjectDataSet dataset, Guid projectUid, Guid sessionUid) at Microsoft.Office.Project.Server.BusinessLayer.ProjectQueueDispatch.InternalDispatchMessage(IPlatformContext context, Message msg, Group messageGroup,
JobTicket jobTicket, MessageContext mContext)'.
•Queue:◦GeneralQueueJobFailed (26000) - ProjectUpdate.ProjectUpdate2Message. Details: id='26000' name='GeneralQueueJobFailed' uid='f8bb5d93-20e9-e411-b302-005056ae159c' JobUID='a6fa36de-1fe9-e411-b302-005056ae159c' ComputerName='1af8030b-7714-4c8f-8738-903b73e87a82'
GroupType='ProjectUpdate' MessageType='ProjectUpdate2Message' MessageId='2' Stage='' CorrelationUID='0a4aff9c-dd6b-7015-87a8-29d876e1540c'. For more details, check the ULS logs on machine 1af8030b-7714-4c8f-8738-903b73e87a82 for entries with JobUID a6fa36de-1fe9-e411-b302-005056ae159c.
What will i do .Please help.

Hi Jeremy,
Thanks for the reply .I try the steps that is given in link above but its not working.Please suggest something.What
should i do.

Could I lose work by opening a project from PWA instead of Project?

Here is the scenario:
Due to network problems PMs are using autosave to save the project every 15 minutes.
Project manager1 creates a plan, edits it and publishes the plan from Project Pro. They close and check in the plan.
Project manager2 opens the plan, edits it and saves the plan in Project Pro. Makes lots of changes, but DOESN'T publish the plan.
Project manager1 reopens the plan for editing in Project Pro FROM PWA, doesn't see any of the changes made by PM2, but continues to edit and save the project every 5 minutes.
Project manager1 realizes the plan appears different. Is it? Did PM1 get the published version from opening from PWA, and by editing and saving that in PWA did they overwrite the changes that PM2 made back over the version in the Draft
database?
In the real world, it appears that is what happened. Luckily the previous draft version was backed up in archive, so we were able to restore that one, and only lose a little work.
I thought I had seen every way a plan could get mangled, but this was an interesting nuance I would like to understand.
For some reason, even though I know that the published version displays on PWA, I thought that if I opened a project from PWA in Project Pro for editing, I would get the draft version by default. Is that not the case?
Would love some thoughts from the experts out there...
Mark E Read Principal Sequence Advisors, Inc.

Your understanding is correct. You should open it in Draft (assuming it was in Edit mode). It's possible that they opened the PDP but forgot to hit Edit - in which case they wouldn't see unpublished changes.
Andrew Lavinsky [MVP] Blog: http://azlav.umtblog.com Twitter: @alavinsky

Unable open Project details or a project from PWA Project server 2010 with Alias name

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx)
its is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
can any one Help me.
vijay kommireddi

Hi Eric,
Thanks for your Reply.
As you said i have added in Manged Path as (Testpwa/projects.aspx as <Wildcard inclusion>) But still problem is there it is asking user
name password again if click on any project in project center and and showing page cannot be displayed error.
This is url its is showing in the below of the IE ( http://def.ad.com/testpwa/projectdrilldown.aspx?ProjUid=e28c6d43-85b6-478d-9542-2961cc81a69e)
I have observed one more thing if click on Project
details then only this issue is coming project schedule and project information
is also opening with Alias name.
My farm version is 14.0.7015.1000
Vijay Kommireddi

Deadline date preventing project update from PWA interface

We have the following error when trying to update a project PDP through PWA. "An error has occurred when saving your project to the server. Please contact your administrator for assistance."
We have identified in the project schedule one task that is the origine of the problem. In this task, there is a deadline date. If we remove the deadline date, we can update the project from PWA without any problem.
The task has a deadline date and is completed at a 100%.
If someone has an explanation for this, I will be happy to hear it.
Mermoz

We are using project server 2010. We have SP2 installed. I don't know CU last applied.
We have this issue with one project. I can't reproduce the problem with another project.
If a remove the Deadline Date and publish, then, PWA update works fine.
If I add back the Deadline Date and publish, then, we get the same error message.
Next, I will try to add back a different "Deadline date" and will report the result.
Mermoz

Error Message when opening Project Plan on Project Professional from PWA 2013 using either Google Chrome or Firefox

Dears,,
One of our clients uses Google Chrome
as their standard navigator to open PWA 2013 that we have deployed for them.
Every thing went fine until we tried to open a project plan using Project Professional 2013 from PWA using the Edit in Project Professional option, we had the below error:
"Project Web App was unable to find the specified Project.
the project was not found on Project Web App. some possible reasons include:
The Project has not yet been saved successfully to the server.
The Project has been deleted on the server.
you don’t have adequate permissions to open this project.
if the project is available in the local cache, you can click the globe in the status bar and select "Work offline", and then open the project, if the problem continues, contact
your administrator."
Please note that IE is working fine with this scenario,
the belwo screenshot shows the error that appears to the users.
Ibrahim Al-Masri Technology Manager at MethodCorp

Hi All,
As Gary and Guillaume suggested, have you tried to install IE tab extension for chrome?
See the link below:
http://www.ietab.net/
and also im with what Dale has posted
(why don't you just tell the PM to use Internet Explorer instead of Google Chrome?
I suspect that this problem reveals that PWA does not work perfectly in browsers other than the Internet
Explorer,
so I would simply mandate that all PMs and TMs need to use Internet Explorer for Project Server.
Just a thought. Hope this helps.)
from my side , i have tested it and it works perfect.
Karim El Zarka, MCTS Sharepoint 2010 , MCITP SharePoint Administrator 2010 Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever you see a reply being an answer to the question of the thread, click "Mark
As Answer

Project Professional 2010 and pwa hangs when opening a linked project from PWA on Project Server 2010

When I open a linked project in Project Professional 2010 from PWA, Project Professional 2010 hangs with the "Links Between Projects ..." dialog box open. Unable to move or close the dialog box. Unable to move or close Project Professional
2010. The PWA tab on internet explorere is frozen and unable to access although other tabs in IE are accessible. End up having to reboot to close down project or force the process to end. I suspect a hidden dialog box is the culprit maybe
the scheduling conflict dialog box but am unable to access or switch and cannot confirm that there is another dialog box.
Has anybody else experienced this problem?
Thanks,
Julie

I have seen it hang when trying to open a project schedule even with no external links.
Project 2013 Pro, Link to schedule is on a PWA on a Project 2007 server.
If Project 2013 is open before clicking on the link, there is a long delay and the project schedule opens up in the web tab where the link was selected. If Project 2013 is not open, it just hangs and has to be shut down via the task manager.
No idea why. I can create a link to the shared volume and that works OK. But if I actually try to open MS Project by clicking on the link to a .mpp file it never opens in MS Project.
Mike

How do I add music from itunes to my project without getting an "add media failure" message?

Hi,
Ive had a project I've been working on in Elements 11 for a while and it crashed whilst uploading more footage last night.
Since the crash, I've lost all sound on my music files and keep getting an error message when I try to reload the music files from itunes into project assets.
Any help is greatly appreciated!
Luke

Here's how to do it:
iTunes: How to convert a song to a different file format
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

MDB messages dont get processed from Queues when involving a remote Topic in transaction

Using WLS 6.1 SP4 on winXP Pro boxes, I have come across a peculiar problem:
          I have several MDBs that process ObjectMessages from queues and forward their payload (wrapped in another new ObjectMessage) to other queues, all of which are located within the same WLS server.
          Right now I'm adding a new MDB that gets messages from a remote Topic with a durable subscription, and forwards the payload to local queues after some processing.
          When the Topic is local as well, there is no problem. But when the Topic is set up in a remote machine, only the MDB that has the remote durable subscription works the way it should. It receives the remote message and forwards it to the corresponding local queue. But then the messages in those local queues dont get processed. The 'Messages Received' count rises and the 'Messages' count stays at 0, as if the messages had been correctly processed and acknowledged, but no onMessage() method is called besides the one from the MDB that has the durable subscription to the remote Topic (I can tell because there's no further processing from the queue those messages get put in). It's as if those messages were simply received and acknowledged without being passed to other MDBs by WLS.
          * All queue MDBs use Required container-managed transaction management and auto-acknowledge
          * All queue MDBs have default durability for their queue subscriptions
          * The topic MDB has a durable subscription stored in a filestore
          * Lookup of the remote Topic is done via JNDI
          Since the processing and forwarding of messages occurs the way it should when everything is local, I am inclined to believe one of two things:
          a) There's some issue with the way WLS treats messages (or even just payloads) when they come from a remote server
          b) WLS is doing something I'm not aware of when propagating a transaction that begins with the delivery of a message from a remote JMS Topic when it involves further forwarding of messages in local JMS Queues.
          Any help will be appreciated.
          regards,
          .munir estevane


Is the durable subscriber forwarder rolling back its transactions?
          That would cause the behavior you describe (eg the message gets
          placed in the queue, but is never made visible). What do
          the pending counts on the destination queue look like?
          Munir Estevane wrote:
          > Using WLS 6.1 SP4 on winXP Pro boxes, I have come across a peculiar problem:
          >
          > I have several MDBs that process ObjectMessages from queues and forward their payload (wrapped in another new ObjectMessage) to other queues, all of which are located within the same WLS server.
          > Right now I'm adding a new MDB that gets messages from a remote Topic with a durable subscription, and forwards the payload to local queues after some processing.
          >
          > When the Topic is local as well, there is no problem. But when the Topic is set up in a remote machine, only the MDB that has the remote durable subscription works the way it should. It receives the remote message and forwards it to the corresponding local queue. But then the messages in those local queues dont get processed. The 'Messages Received' count rises and the 'Messages' count stays at 0, as if the messages had been correctly processed and acknowledged, but no onMessage() method is called besides the one from the MDB that has the durable subscription to the remote Topic (I can tell because there's no further processing from the queue those messages get put in). It's as if those messages were simply received and acknowledged without being passed to other MDBs by WLS.
          >
          > * All queue MDBs use Required container-managed transaction management and auto-acknowledge
          > * All queue MDBs have default durability for their queue subscriptions
          > * The topic MDB has a durable subscription stored in a filestore
          > * Lookup of the remote Topic is done via JNDI
          >
          > Since the processing and forwarding of messages occurs the way it should when everything is local, I am inclined to believe one of two things:
          > a) There's some issue with the way WLS treats messages (or even just payloads) when they come from a remote server
          > b) WLS is doing something I'm not aware of when propagating a transaction that begins with the delivery of a message from a remote JMS Topic when it involves further forwarding of messages in local JMS Queues.
          >
          > Any help will be appreciated.
          >
          > regards,
          > .munir estevane

How do I get my movies from iLife"09 into my imovie app on my phone and iPad. In the app it keeps saying "no projects available to copy from iTunes"

How do I get my movies from iLife"09 into my imovie app on my phone and iPad. In the app it keeps saying "no projects available to copy from iTunes"

First, you need to send the project to iTunes:
http://support.apple.com/kb/PH2282?viewlocale=en_US
From there, you can then sync it to your phone:
http://support.apple.com/kb/PH2168

How to get video from archived DVD projects (.dvdproj)

how to get video from archived DVD projects (.dvdproj)

Command (right) - click on the archived project file to open the package with the Finder. Go to the Contents/Resources/Assets/AV folder where the media files are stored.
OT

I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off

I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off. Can someone help?

Ah! You're creating a PDF out of Word through Acrobat. The cutoff is most likely being affected by the printer chosen.
When you call up the print dialogue in Word, check to see what printer is being used. If it's a typical inkjet printer, Acrobat is using the print margins of that printer as the cutoff area. Since most such printers can't print to the last inch and half or so of the paper, that's where it would be cut off.
Near the bottom, under the preview of the document, click on the Page Setup button. It doesn't really matter which printer you select here. Under Paper Size, choose Manage Custom Sizes. Under the Non-Printable Area heading, choose the same printer and set the paper size you're using.
Note that the unprintable margins for that printer will be filled in automatically. That's what's being cut off. Click the + button to create a modified version. The default will be "Untitled". Give it a new name if you want. Then set all of the margins to zero. Click OK. Now you'll have that as a choice under Paper Size. Doesn't matter that the actual printer can't use this setting since you're going to a PDF. Click OK to get back to the main Word print dialogue.
Now choose Save as Adobe PDF. It should give you an exact duplicate of what's on screen in Word since as far as Acrobat is concerned, your "printer" has no unprintable margins.

Project Save "Getting Queued" from PWA

Similar Messages

Maybe you are looking for