Project server 2013 - access denied

We've been using Project Server for 6 months now with no issues. Today all of a sudden no one (not even farm account) can acess the PWA instance. I try to request access but the farm account doesn't get a notification email. individual Project sites are
accessible but anything at the top level site is not accessible. Any ideas on how to resolve this?

[...] going into my central admin and re-setting the site collection administrators gave my farm account access. from there I had to go into each group and delete and recreate all the user group permissions. Once I completed that, everyone was able to access
PWA again.
We're experiencing the same phenomenon in a dev environment. It's just one sandbox of many, so it may not have been detected for a few months.
As site collection admin, I can add and remove users from the SharePoint groups (this one dev instance uses SharePoint permission mode), but it did not have any effect.
Reprovisioning the instance failed with the following 2 messages (for more search engine coverage):
Project Web Instance post provision setup completed with errors for instance http://server/PWASPDE. The error is 'PrepareDefaultAdminUsers failed.'
Provisioning 'SharePoint - 80:PWASPDE': Post provision setup failed. An exception occurred: PrepareDefaultAdminUsers failed
What finally helped was changing the permission mode from SharePoint to Project and back to SharePoint again. Of course, write down the permissions beforehand.
Hopefully, this won't reoccur too often in the future.
Kind regards,
Adrian

Similar Messages

Project Server 2013 Anonymous Access (SP or PS modes)

Greetings,
This has become quite painful. I have two tickets opened with M$ and I've never witnessed that with which I am witnessing.
Simple question, how to enable Project Server 2013 Anonymous Access...I've been at it for over a week, I've tried in both SP perms mode and PS perms mode. And I've built a bone stock SP/PS server to determine if my farm's jacked or not. I get
the exact same behavior...prompt for creds. M$ told me today that anon has never ever been something offered in SP or PS today or at any point in the past. A simple gotomeeting sent that group reeling out off into outer space. I'm glad I
could help them on their technical journey, but damn't if I don't feel used for spending $1000 on two tickets.
Tried everything I could possibly think of...Please help, before I eat a bullet.

When you enable anonymous access to a Web site, you allow anonymous users (and authenticated users who have not been granted access to the site) to browse the entire Web site, including any list, library, folder within a list or library, list item, or document
that inherits its permissions from the Web site
I think you are referring to PWA/_layouts/15/user.aspx if I understood your query correctly.
As you could read, its referring to SharePoint list and libraries and not Project Webpart data.
Anonymous Access: Specify what parts of your Web site (if any) anonymous users can access. If you select Entire Web site, anonymous users will be able to view all pages in your Web site and view all lists and items which inherit permissions
from the Web site. If you select Lists and libraries, anonymous users will be able to view and change items only for those lists and libraries that have enabled permissions for anonymous users.
So this anonymous doesn't mean users can access, PWA pages like Projects.aspx with anonymous account. If this happens all anonymous users would see all projects...
Project PWA site, has pages like tasks.aspx, projects.aspx, Timesheets.aspx, etc. Users who access Project Server 2010 through the Web interface (Microsoft Project Web App) use these pages that are composed of Web Parts, which are modular elements that present
information on SharePoint pages. Now, to get users based data, this checks for user role, permission and data is rendered.
http://technet.microsoft.com/en-us/library/gg314584(v=office.14).aspx
I am curious to know if you would like all users who have not been granted access to the site also access your projects? What is the objective or business requirement you are trying to solve here.
Shazeb Khan

Manage groups Access in Project Server 2013

I am currently set up as Administrator and Project Manager in the Project Server 2013 Account, however when trying to access the section Manage groups, I get the below error, can you please help me?
Sorry,
something went wrong
You do not have sufficient
permissions to view the specified page. Please contact your administrator for
permissions to view this page.
Many thanks,

Hi,
Clear browser cache and ensure the browser has compatibility mode on and the PWA site is trusted. Also you can verify issue with In private browsing mode.
If Issue still persist re-sync your user profile by open and save thru Manage user and verify issue in different machine too.
Hope it will be useful.
Raushan Kumar |LinkedIn

I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting

I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting

it may be your browser. CHeck the folloinwg
1) Turn on Compatibilty mode
2) Security Options / Make it a local trusted site
3) Turn of Protected Mode in the browser under Security
and have you tried it from Chrome
CHeers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Access Project Server 2013 from personal mobile device

Dear All,
This is something great about Project Server 2013 (PWA) where users can view theirs task & other information on their personal mobiles, tabs etc. But i not able to access my company Project Server 2013.
Is that i am missing something to install or configure PWA 2013 as i am admin for this application?
Kindly let me know

That means your PWA site collection in not published externally so your mobile device can't resolve the DNS. If you connect your mobile device to the same network your Project Server environment is on, it will work as the DNS would resolve. You probably
want to look at publishing PWA externally if you want to use it on mobile devices. Here are some links for you / your IT department, the process is the same for PWA and any other SharePoint site collection:
http://www.brightstarr.com/sharepoint-technology-and-application-insights/securely-publishing-sharepoint-externally-using-web-application-proxy
http://blogs.msdn.com/b/sambetts/archive/2014/04/02/setting-up-a-reverse-proxy-for-sharepoint-with-tmg-server.aspx
http://www.isaserver.org/articles-tutorials/installation-planning/Planning-SharePoint-Publishing-TMG.html
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Help needed Regarding Project Server - 2013 Workflow

Hi All,
I am new to Project server 2013 Workflow, hence please help me regarding this. Pardon me if this question is too trivial.
I have created a project type associated with a workflow and my workflow is as follows :
So I am not doing anything here, I am just testing the workflow as mentioned by technet site : http://technet.microsoft.com/en-us/library/dn458865(v=office.15).aspx
But it is mentioned that, after a minute or 2, the workflow state will change, also they have mentioned to press the Submit button.
But in my case, the workflow is not moving to next stage [It just says 'The workflow is still processing - which never changes after hours] or I am getting the submit button (Submit button is disabled on the ribbon). Below is the state of my workflow :
PS : I have made the user added to Portfolio managers group as well. But still I am having this same issue.
The Workflow manager is installed properly, and it is working fine in case of List workflow. I am facing the issue only wrt Site workflow for Project server 2013.
Please help me to solve this issue.
Thanks,
shanky

Hi Kiran,
I am now facing issue while assigning a task to a person in the workflow.
I am having a person named say 'John' , who is included in Project Manager as well as Portfolio Manager.
And I am using a workflow as :
Stage : Conceptual
Assign a task to John (Task outcome to Variable: Outcome5 | Task ID to Variable: TaskID3 )
Transition to stage
Go to Approval
But this is again giving issue as :
Workflow Internal status : Cancelled
Details: System.ApplicationException: HTTP 401 {"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have
permission to perform this action or access this resource."}}}
PS : I have used the same Sharepoint admin account for 'Account Name' in ‘User Profile Sync' , Is this causing the issue? Please let me know.
Thanks,
Shanky

Project Server 2013 - OLAP Cube Build Issues

Hi,
I have a Project Server 2013 environment with SQL Server 2012 SP1. My cube built successfully and Report Authors group (including me) were accessing the templates and Data Connections from BI centre successfully.
I re-built the cube and suddenly we all cannot access templates or data connection as it says 'Access denied'!
Went to server hosting Analysis Services and checked the role ProjectServerViewOlapDataRole and didn't see any of the check box ticked for database permissions like it was when I initially built the cube and added Report Authors group and account
that is used by Secure Store app. Membership has both account and group.
Has anyone come across this issue?
Thank you,
SJ

SJ,
The access of the BI Center, templates and data connections are handled by SharePoint permissions and are usually inherited from PWA.
The ProjectServerViewOlapDataRole simply provides the ability to view the data from the OLAP database. It sounds like the issue isn't with the OLAP but rather with PWA itself. An OLAP error would have only precluded you from retrieving data.
Did someone modify the BI Center site permissions recently such as breaking inheritance?
Treb Gatte, Project MVP |
@tgatte | http://AboutMSProject.com

Can new PWA views be created whereby a filter can be set and associate to the view by default? (Project Server 2013 ONLINE)

My main question is: Can new PWA views be created whereby a filter for that view can be set, and associate to the view by default? (Project Server 2013 ONLINE)? and can I have a filter set to filter on person logged on to...
In previous versions of Project Server, when CREATING a PWA view, we were able to apply/ define a filter for that view. Does not seem like it is the case in Project Server 2013 Online. And if I remember, we could also use the URL Guid_view_id.
Please confirm; and / or tell me how-to.
What I was hoping to do is the following... Given that our standard that we have adopted for reporting time is 'My Timesheets' (fyi, Single Mode Entry=ON), we have some resources who have others who do it on their behalf via 'My Tasks' (ie., accomplished
by using the 'Assignment Owner' field, accordingly). Therefore, when entering time on someone else's behalf within 'My Tasks', we like to present the user that is logged in only the tasks that they are are assigned to update on others' behlaf.
I know that there is another more elegant approach to doing this which may be to use the Delegation feature. But since we are trying to stick to Sharepoint Security mode for now, this is not an option for the time being.
Any help appreciated would be greatly appreciated.
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Hi Spiro,
1- You still can define in Project Online a filter in the view settings, it is located just above the category setting. Here is a screenshot of the summary project center view:
2- The view GUID is not anymore in the URL, since the URL triggers an action only on the webpart and not on the whole page. I agree this is annoying since it was great to send a URL with a specific view.
3- Concerning the access to my timesheet versus my task, I'm not sure to get a full understanding but on a general way, it is much more easy to deal with those situation using categories which you cannot do with the SP permission mode.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to import the Issues list from an Excel File in Project Server 2013

Hi,
I'm using Project Server 2013.
A Project Manager has been playing with the Issues List, deleting some fields, creating new columns and modifying some columns name. The result of this is that I'm getting this error everytime the task
Reporting (Project Sync) is executed:
General
Reporting Wss list sync failed:
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='4feafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='5deafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='69eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='75eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='81eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='8deafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
Reporting message processor failed:
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='5beafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='67eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='73eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='7feafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='8beafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='97eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
Queue:
GeneralQueueJobFailed (26000) - ReportingWSSSync.WSSSyncMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='98eafda7-f147-e411-940d-005056957f05' JobUID='9e937da7-f147-e411-940e-005056957f0d' ComputerName='b579360a-53ab-4fe0-bf9b-c62f5e8d3529'
GroupType='ReportingWSSSync' MessageType='WSSSyncMessageEx' MessageId='1' Stage='' CorrelationUID='0945bd9c-0d6a-a0f1-47b0-68cdfcfbff9a'. For more details, check the ULS logs on machine
b579360a-53ab-4fe0-bf9b-c62f5e8d3529 for entries with JobUID
9e937da7-f147-e411-940e-005056957f0d
What I'm trying to do is to create a new Project from the scratch, update the Issues List, not deleting or modifying columns, just creating new columns in order to match the names he (the Project Manager) put in his Issues List, then Export the list to Excel,
and then create a datasheet view matching the Exported list, but here I don't know how to import the list (copy / paste or whatsoever it can be done...)
Do you know how to do it, or do you know another/any method to solve this problem?
Thank you in advance,
José Espases

Hi José,
2 considerations:
The first one is that (as you experienced) one should not delete or rename any of the predefined columns in the risk/issue list. What you did is the right way, meaning keeping the native column as is and creating new ones based on the business needs. Finally
you just need to create view with the appropriate fields.
Then for importing risks from an Excel list, I can't test it right now, but you should have a datagrid view (MS Access type) allowing you pasting data from Excel.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How to get timesheet information in a javascript (Project Server 2013)

Hi all,
In Project Server 2013, I'm trying to customize the Timesheet ribbon. This far, I've been able to add a new button and tie an event to it. All is working well. This is all done using elements.xml and a javascripts.
Now the problem is that I want to get some informations about the timesheet (the Guid for example) and, for now, I've got no success. I know that there is an object called PS.TimeSheet, but when I try to use some PS.TimeSheet's methods I get an error.
Note that i'm in the page http://servername/pwa/timesheet.aspx (there is not Guid in the address) and all the treatments should be done in the javascript (no call to another aspx page)
Thanks !

Finally, I've found the solution.
My goal was to add a button in the timesheet ribbon to launch a special report showing some data about the timesheet. The report has the timesheet Guid as parameter.
To customize the Sharepoint ribbon, you have to do it via an xml file and a javascript (a lot of explanation is available in the internet that explains how to do it). So I had to call a function in the javascript to launch the report (which is a SSRS report).
When you are in a javascript you have access to many global variables. When the timesheet.aspx is displayed, there is a global variable called "timesheetComponent".
Using this variable we can call the method :
timesheetComponent.m_consumedApi.get_Impl()
to get an implementation of the current timesheet. This implementation has an attibute that has a lot of nice stuff about the current user and the current time sheet. This attribute is
_headerInfo
_headerInfo is a structure that includes tsUid which contains the timesheet Guid I was looking for.
Finally, the function attached to the button goes like this :
function _LaunchReport() {
var tsUId;
var rptPath;
var tsImpl = timesheetComponent.m_consumedApi.get_Impl();
try
if (CONST_REPORT_PATH == null || CONST_REPORT_PATH == "" ) {
alert("Constant CONST_REPORT_PATH is not defined")
else {
tsUId = tsImpl._headerInfo.tsUid;
rptPath = CONST_REPORT_PATH + 'TimesheetDetails&rs:Command=Render&rc:Parameters=false&TimesheetUID=' + tsUId;
window.open(rptPath);
catch (Err) {
alert(Err)
CONST_REPORT_PATH is the path to SSRS defined elsewhere
I hope this will help some other poeple !

Project Server 2013 - External Data Refresh Failed

Hi,
I have built new Project Server 2013 in a 3 tier farm, with OWA, configured PWA site everything working fine except, Reports in BI Center, where i am getting - External Data Refresh Failed error
http://Sp2013/PWA/ProjectBICenter/Sample%20Reports/Forms/AllItems.aspx
i have stopped using Excel Web also to use Excel Services, get below error
External Data Refresh Failed
An error occurred while accessing application id ProjectServerApplication from Secure Store Service. The following connections failed to refresh:
Project Server - Issue Data
Project Server - Risk Data
Learn
more about data refresh
Steps Tried:
1.deleted Excel Services - recreated
2.Deleted Secure store - recreated
Built test box without OWA still have the same issue
Any suggestions/ Solutions greatly appreciated.
Thanks
Aleem
Alim

Hi,
If you are still facing the same issue follow the below steps:
1) Access PWA from your server
2) Download any built in report from Reports section (in your case
Project Server - Issue Data Project
Server - Risk Data) to your server.
3) Open report in excel, go to Data->Connections in Workbook Connection dialog open "Project Server - Issue Data" go to properties.
4) Here select tab 'Definition' under connection file remove tick for 'Always use connection file'
5) Tweak your connection string & tick save password option
6) Excel Services: Authentication Settings (suit yourself)
Now, save & publish on PWA, hope it works :)

After installing Project Server 2013 (without updating SharePoint Server 2013 SP1))

I am facing the problem while opening project web app. I configured the SharePoint 2013 and project server 2013. Here is the detail what I performed the steps:
OS Server 2012 R2, SQL Server 2012, SharePoint server 2013 version
15.0.4420.1017, Project Server 2013 version
15.0.4454.1000. SharePoint configured and running successfully. After project web app site provisioning successfully completed. I got the below error.
Microsoft.Office.Project.PWA.WebParts.PWAPart' from assembly 'Microsoft.Office.Project.Server.PWA, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' cannot reduce access.
I run this psconfig -cmd upgrade -inplace b2b -wait -force. But still getting same error.
Previous steps:
Earlier I had also tried to install SharePoint Server 2013 SP1 "3823428". After the installation SP1 some of sharePoint site features suddenly stopped e.g: Cannot browse "Service Applications -->
Manage service applications" option even after re-start the server. This was previous error after upgrading SP1
"Method 'get_IsClientValid' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy' from assembly 'Microsoft.SharePoint.WorkflowServices,
Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' does not have an implementation"
Anyone can help me!!! Thanks...
Faisal Numan

hello,
For SP2013 and PS2013 to work properly on Windows Server 2012 R2 you need to use the SP1 install media for both, download SharePoint 2013 with SP1 and Project Server 2013 with SP1
http://support.microsoft.com/kb/2891274
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Project Server 2013 Task Reassignment Privileges Off? (Works in Timesheet)

Version: Project Server 2013
I'm trying to give our users access to reassign tasks. I turned on "Reassign Task" on the Global Permissions and gave them security to "Assign Resource" on all their categories.
I've tested this, and the "Reassign" feature is available and working then they are on the "Timesheet" page, but it is grayed out and gives the message:
"This control is currently disabled. You might not have the right permission level to use this, you might need to select an object or item, or the control might not work in this context."
Again, the same task is available to be reassigned in Timesheet though.
My guess is that this is a Security Permission issue, because my account which I am the Administrator and Owner of the project, I can reassign tasks on both pages.
Any suggestions?
Thanks,
Justin
It's me

Hi Justin,
Just for your information, as far as I know, the "assign resources" is not necessary for using the "reassign task" feature. The "reassign task" global permission is enough.
To be sure to understand your issue, the "reassign task" button is available for you as admin or project owner, but not for users which you granted the "reassign task" permission to? Am I right?
You are talking about global permissions but did you add the "reassign task" to the
groups permission the users belong to?
Silly question, but do the users have select a task before trying to reassign it?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Allow collaboration on un-published / checked-in project on Project Server 2013 and Project Online

Hi All,
Before a project is officially published specific resources in the project team need to be able to "collaborate" i.e. create tasks, change dates, etc. before the project is published. The complication is that we need this collaboration to happen
on un-published / checked-in versions of the schedule. For example, the primary Project Manager adds tasks and makes changes to a published version of the schedule, saves and checks-in the project (doesn't publish), tells a secondary PM to go in and review
the changes, the secondary PM should be able to see the changes the primary PM made, even though the schedule changes weren't published, be able to check-out the schedule, review what the primary PM did, make some more changes, save and check-in the schedule
(again, without publishing it), and tell the primary PM to review. Then the primary PM could go, check-out the schedule, review it, save it, publish it, and check it in.
Can Project Server 2013 or Project Online allow to do this? I looked into permissions and Server settings but I couldn't find anything that would indicate it is possible.
Any help will be greatly appreciated!
George

Hi George,
If you perform some tests, you'll see that even from PWA, the schedule can only be edited from the draft table. When you access the schedule in read only (as a team member for example), you see the published version, but as soon as you edit it (after clicking
on the edit button assuming you have the appropriate permission), you'll open and update the draft version of the project.
As far as I can remember (I don't have it in front of me now), you have a "line" in the schedule PDP (don't know how to call it in english) that will tell you if you are accessing either the draft or the publish version.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Project Server 2013 SSRS with Project Site

Hi All,
We are using Project Server 2013. We have developed a SSRS report by accessing Project Site lists. It was working fine for some time, now when we try to access the report it is showing loading. The data source itself is not working, we used http://<servername>/PWA
as URL for the data source . The reports developed without Project Site list are working fine.
After 5 to 10 minutes it is showing the below error.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'dtRisk'. (rsErrorExecutingCommand)
An error occurred when accessing the specified SharePoint list. The connection string might not be valid. Verify that the connection string is correct. (rsSPDataProviderError)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
When we try to test the datasource connecting string, after 5 minutes showing the below error.
An error occurred when accessing the specified SharePoint list. The connection string might not be valid. Verify that the connection string is correct. (rsSPDataProviderError) Get Online Help For more information about this error navigate to the report server
on the local server machine, or enable remote errors
Below connection setings
Thanks in advance , Taj

Hi Taj,
Your list is in PWA? is a global list?, if not, try to make a connection with http://server/PWA/SiteProject may this can resolve, because when you do some DS with a SPList, your need to stablish that connection directly at site path where you have the list.
I hope this help
Ray

Project server 2013 - access denied

Similar Messages

Maybe you are looking for